Xserver-upgrade (to 7.0) kdm starts slow
Hello,
I have pacman configured that it uses packages from current when possible and then look for packages in testing.
Recently I decided to upgrade to the new Xserver in testing. After some some tweaking everything seems to work well except the startuptime of the kdm-loginmanager.
Previously, it took 5-10 seconds before I got my login-screen. However, now it takes about a minute to get the login-screen and with this minute I mean the time that kdm needs to show the login screen, not the complete startup-time. Everything goes fast. In about 25 seconds everything starts, and then I have to wait for kdm.
I installing kdebase (contains kdm) and kdeutils from testing, but that didn't help (kdeutils was for another problem, that is solved.cdidn't need to upgrade kdeutils I think.).
I tried getting an overview what is happening with strace, but there everything seem to load in ~12 seconds and then there is output that is difficult to understand for more. I have to say that I did previous kdm-startups before the one I got the strace-output from.
The fastest startup I got was 30 seconds and that was when I already had done previous startups. It still is a long time.
I'm using the i810-driver (for the 915 GM chipset) on an nx6110-laptop.
Anyone has a similar experience? Anyone has (a) suggestion(s)?
Thank you,
Michel
did you use the same config from the old X? One of the differences with this new xorg is that the paths have changed. I can't remember the extact paths but many of them have X11 omited from them. There's info about it on arch's homepage "Xorg7". So check that your paths are correct in xorg.conf
Similar Messages
-
After Upgrade to Yosemite, all apps are slow.
I upgraded to Yosemite and all applications are slow. ( as e.g.. starting to type in this box give me beachball for 2 seconds initially) A big difference in speed from Mavericks to Yosemite. Opening system preferences takes 3 seconds to load, and clicking on Users & Groups takes 25 seconds to open.
I do not have fire vault enabled. I did a safe boot and some apps did appear to open faster. Also did a repair disk and rebooted. No change. When Safari is open it takes 5 seconds to open a new window. I ran EtreCheck and the report is as follows;
Thanks for any help;( After pasting the EtreCheck text file, I clicked on this box to add the Thanks... , it took 2-3 seconds for the beach ball to stop spinning.)
Problem description:
After upgrading to Yosemite, all apps are slow,
EtreCheck version: 2.0.6 (91)
Report generated October 20, 2014 at 11:46:01 AM MDT
Hardware Information: ℹ️
iMac (24-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:23:55
Disk Information: ℹ️
WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 639.28 GB (130.48 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5670S
USB Information: ℹ️
Apple Inc. Built-in iSight
Burr-Brown from TI USB Audio CODEC
Canon MP480 series
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
MyBookMovies (disk2s2) /Volumes/MyBookMovies : 2 TB (549.58 GB free)
LaCie LaCie Hard Drive USB 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups : 795.40 GB (322.99 GB free)
Time Machine Airdisk (disk1s3) /Volumes/Time Machine Airdisk : 100.77 GB (55.52 GB free)
EXCHANGE (disk1s4) /Volumes/EXCHANGE : 100.09 GB (45.35 GB free)
ALCOR Generic USB Hub
Prolific Technology Inc. USB-Serial Controller
Prolific Technology Inc. USB-Serial Controller
Hewlett-Packard hp LaserJet 1012
Apple Computer, Inc. IR Receiver
Prolific Technology Inc. USB-Serial Controller D
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
[not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
/Library/Extensions
[not loaded] foo.tun (1.0) Support
/System/Library/Extensions
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[loaded] com.prolific.driver.PL2303 (1.5.1 - SDK 10.6) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[loaded] com.paragon.NTFS.notify.plist Support
Launch Agents: ℹ️
[running] com.abbott.mal.launchclient.plist Support
[loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
[loaded] org.gpgtools.Libmacgpg.xpc.plist Support
[loaded] org.gpgtools.macgpg2.fix.plist Support
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
[loaded] org.gpgtools.macgpg2.updater.plist Support
Launch Daemons: ℹ️
[running] com.abbott.mal.malserver.plist Support
[loaded] com.adobe.fpsaud.plist Support
[running] com.freemacsoft.appcleanerd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
[not loaded] org.virtualbox.startup.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[invalid?] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.vladalexa.MagicPrefs.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
AppCleaner Helper Application (/Applications/AppCleaner.app/Contents/Library/LoginItems/AppCleaner Helper.app)
Messages Application (/Applications/Messages.app)
MagicPrefs UNKNOWN (missing value)
Calendar ApplicationHidden (/Applications/Calendar.app)
Mail ApplicationHidden (/Applications/Mail.app)
Contacts ApplicationHidden (/Applications/Contacts.app)
PowerboxInjector Application (/Applications/PowerboxInjector.app)
Internet Plug-ins: ℹ️
LogitechHarmony: Version: 2.0 - SDK 10.7 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.2.0 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
EPPEX Plugin: Version: 4.1.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Safari Extensions: ℹ️
1Password
AdBlock
ClickToFlash (Disabled)
Print Plus (Disabled)
ClickToPlugin (Disabled)
OpenIE
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
GPGPreferences Support
Growl Support
MacFUSE (Tuxera) Support
MagicPrefs Support
Paragon NTFS for Mac ® OS X Support
Perian Support
QuickTime Player X Preferences Support
WDQuickView Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 795.40 GB
Total number of backups: 29
Oldest backup: 2014-10-08 20:15:48 +0000
Last backup: 2014-10-20 17:32:33 +0000
Size of backup disk: Excellent
Backup size 795.40 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
10% WindowServer
5% syncdefaultsd
4% Safari
1% AppleSpell
0% com.apple.iCloudHelper
Top Processes by Memory: ℹ️
266 MB mds_stores
258 MB Safari
180 MB Finder
137 MB WindowServer
136 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
3.93 GB Free RAM
2.97 GB Active RAM
443 MB Inactive RAM
978 MB Wired RAM
1.82 GB Page-ins
0 B Page-outsYou could do that, but when setting up your new iMac it is a much better idea to transfer only your existing User Accounts. In other words when Setup Assistant appears, de-select "Applications", "Computer and Network Settings" and "Other files and folders". That way you will eliminate the possibility of reinstalling potentially incompatible software from your existing Mac or its TM backup. It's best to create new printer queues and preferences anyway.
Your venerable HP 1012 will probably work without any difficulty but if you need its driver download it here. If it gives you trouble try OS X's generic PostScript driver.
After configuring your user account, install original versions of your essential software from their original sources. In other words if you installed them via download from the developer's website, download them again. You might need license keys so gather them. Obviously the Mac App Store makes things easy since anything you obtain from there is already linked to your Apple ID and is easily reinstalled by going to your Purchases page.
Don't reinstall things like AppCleaner, CleanMyMac, Western Digital "Smartware" or any of that junk. You don't need it. MacFUSE is outdated. Research Prolific Technology for potential updates for their serial controller. The one you have may work, or not, but you should re-download its driver.
Consider abandoning Microsoft altogether and migrating to better solutions such as Pages, Numbers, and Keynote. They are all free with a purchase of a new Mac and are far more integrated with OS X than anything Microsoft will ever be able to accomplish.
The Burr-Brown USB device is unknown to me, so research TI's website for support if you need it.
If your essential software was distributed on optical media, you can use OS X's "DVD or CD sharing" feature to remotely mount the older iMac's optical drive so that you can install its software. It will work as though that drive were physically installed on your new Mac. Having said that, anything that was distributed on optical media is highly likely to have been outdated a long time ago.
If your essential software is old, orphaned, no longer supported, or is no longer available, meaning you have the only viable copy, the only option is to transfer it from the TM backup or older Mac. In that case be very cognizant of the likelihood for incompatibility, and have a plan for uninstalling it should it cause adverse effects. Creating a new TM backup is the way to do that. A new external HD dedicated to the new Mac is a cheap investment. When you are certain you no longer require the older Mac's TM backup, you can erase it and use it as an additional, redundant TM backup or "clone" repository – whichever you decide is best for your backup needs. -
HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding
XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.
munish khanna wrote:
1. upgrade to lion, which should over write previous software and the reasons for it being slow.
No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
http://eshop.macsales.com/installvideos/
2. Format the hard disc and reinstall snow leopard.
That will work, provided your data is off the machine first.
Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
http://www.charlessoft.com/
Read here for plenty of how to's
https://discussions.apple.com/message/16276201#16276201 -
I'm Apple promoter and love it. But, since I upgrade to Yosemite, my MacBook started to act like a PC. I need to restart it from time to time and very often. Also when I plug my headset, it dosent recognize it and I need to "Preferences" to select it manually. So many small issus but acting like PC it is very annoying, how can I recommend Apple for people?
Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor. Please use copy and paste as screen shots can be hard to read.
Etrecheck – System Information -
I upgraded to ios7 it has extremely slow charging and gets discharged soon and on its own without using my cel pls guide me I'm so worried pls pls guide
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
FIREFOX 4 IS STARTING SLOW AND WORKS SLOW MY PC IS NEW..OLD FIREFOX VERSION DIDN'T DO THIS
I don't have to have any windows open to have version 4 start slow!
I can play a game of solitaire while waiting! My old version didn't ever do that! It has just been since I upgraded to 4. I have a newer PC...running windows 7!yes it is working faster but the link you gave me for getting my cookies and all my stuff from the old profile is a bit confusing!
Where it says: 4. Open the new Firefox profile folder
Where is it?
I opened my old firefox. went under Application Basics. clicked on open containing folder. That opened. Now how do I open my new profile folder? I am sure I am missing something. I just can't figure out what! I have all my old bookmarks. I just need the cookies and saved passwords. I am still confused on the open new profile folder and right click and paste. Where is my new folder. Is it after Open Containing Folder just like on the old profile? The window that opens up when you do that? I just don't want to be adding to it if that is not where I go!!! -
After upgrading to Yosemite Illustrator runs veryyyyyyyyyy slow.
after upgrading to Yosemite Illustrator runs veryyyyyyyyyy slow..... lag time is very long and scores up the work flow!
If you didn't do a complete reinstall from the original media, then you need to do it. Adobe software doesn't do migration well.
-
[Reopened] qtcreator starting slow with at-spi error
Hi
After the qt update qtcreator is starting slow. After seconds of nothing happending the following message is printet to the stdout:
[user@ArchBox ~]$ qtcreator
xQt at-spi: error getting the accessibility dbus address: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Accessibility DBus not found. Falling back to session bus.
Only solution i found was removing at-spi as a workaround. But Gtk3 depends on it so this is not possible. Any suggestions?
Thanks, regards
Archdove
Last edited by Archdove (2013-03-07 12:20:36)Ok. So i removed all the qt stuff and deleted even the projects. Result is that it is starting fast now. The error however remains.
Solved for me.
Edit: Reopened. Back to slow startup after the first try.
Last edited by Archdove (2013-03-07 12:20:57) -
After upgrading Yosetime my system is very slow. Safari webpages are not opening. I can go back to Mavericks again ?
Model Name: MacBook Air
Model Identifier: MacBookAir6,1
Processor Name: Intel Core i5
Processor Speed: 1.3 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 4 GBHi ..
Better to troubleshoot Yosemite.
Not enough free storage space can slow your Mac down.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space. OS X Tips Where did my Disk Space go?
As for Safari, might be a cookies, cache, extensions, or plug-ins issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, from the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here. -
Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?
Hi AngieLynch,
Thanks for visiting Apple Support Communities.
It sounds like you're seeing some unexpected behavior in Mail.
Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/ht1427
Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account.
These articles walk you through creating a new user and setting up Mail:
OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
http://support.apple.com/kb/PH11468
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Best,
Jeremy -
I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.
Hi Pete. The repair of disk permissions can help resolve any application crashing or misbehaving.
As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble... -
Sunce i upgraded my MBP Retina, it became slower than before when i shutdown. Now, it take about 25 seconds to go off while before was about 5 or 6 seconds. any suggestion?
Have a cup of coffee.
-
my mac start slow
I have the same problem with my MBP. The spinning wheel is here more than not.
-
SInce upgrading to mavericks computer is so slow now.
SInce upgrading to mavericks computer is so slow now. Freezes more than it opens applications. Should I upgrade ram form 2gb to 4gb? Would that help? Wish I had left it using snow leopard at this point.
Many thanks Pete. Would upgrading to 4GB be enough?
Below is the etrecheck report.
Thanks again
EtreCheck version: 2.1.8 (121)
Report generated 27 March 2015 11:58:36 am NZDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
iMac (20-inch, Early 2009) (Verified)
iMac - model: iMac9,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.9.5 (13F1066) - Time since boot: 2:6:13
Disk Information: ℹ️
Hitachi HDT721032SLA380 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (118.77 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
USB2.0 External Mass Storage Device
Apple Computer, Inc. IR Receiver
EPSON USB MFP
HID Wireless Mouse HID Wireless Mouse
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Anywhere
Adware: ℹ️
Geneio [Adware! - Remove]
Downlite [Adware! - Remove]
Kernel Extensions: ℹ️
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) [Click for support]
/System/Library/Extensions
[loaded] com.movavi.driver.SoundGrabber (1.6.5 - SDK 10.6) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Launch Agents: ℹ️
[running] com.3ffda93913f066b8.agent.plist [Click for support]
[loaded] com.divx.dms.agent.plist [Click for support]
[loaded] com.divx.update.agent.plist [Click for support]
[running] net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
[not loaded] .plist (hidden) [Click for support]
/usr/local/libexec/TorchUpdater /usr/local/libexec/TorchUpdater --hello=torch
[not loaded] com.3ffda93913f066b8.daemon.plist [Click for support]
[running] com.3ffda93913f066b8.helper.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.anchorfree.ajaxserver.plist [Click for support]
[loaded] com.bombich.ccc.plist [Click for support]
[loaded] com.tunnelbear.mac.tbeard.plist [Click for support]
User Launch Agents: ℹ️
[failed] [email protected] [Click for details]
[running] com.codecm.uploader.plist [Click for support]
[loaded] com.genieo.completer.download.plist [Adware! - Remove]
[loaded] com.genieo.completer.ltvbit.plist [Adware! - Remove]
[running] com.genieo.completer.update.plist [Adware! - Remove]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Hotspot Shield UNKNOWN Hidden (missing value)
Mac Game Store Helper Application (/Users/[redacted]/Library/Application Support/MacGameStore.com/Helper/Mac Game Store Helper.app)
Internet Plug-ins: ℹ️
OVSHelper: Version: 1.1 [Click for support]
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.2.4 [Click for support]
NP_2020Player_WEB: Version: 5.0.94.0 - SDK 10.6 [Click for support]
Unity Web Player: Version: UnityPlayer version 5.0.0f4 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.6 [Click for support]
RealPlayer Plugin: Version: Unknown [Click for support]
Safari Extensions: ℹ️
AdBlock
FastestTube
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
BackUp [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
12% Toast Titanium
12% firefox
6% WindowServer
3% Dock
1% mds_stores
Top Processes by Memory: ℹ️
256 MB firefox
41 MB Mail
39 MB Toast Titanium
37 MB Opera
35 MB Opera Helper
Virtual Memory Information: ℹ️
20 MB Free RAM
577 MB Active RAM
576 MB Inactive RAM
377 MB Wired RAM
3.92 GB Page-ins
1.20 GB Page-outs
Diagnostics Information: ℹ️
Mar 25, 2015, 05:05:56 PM /Library/Logs/DiagnosticReports/Toast Titanium_2015-03-25-170556_[redacted].hang
Mar 27, 2015, 09:46:10 AM Self test - passed
Mar 26, 2015, 04:05:10 PM /Library/Logs/DiagnosticReports/Mail_2015-03-26-160510_[redacted].hang -
Upgraded to windows 10 now start up is slow
right upgraded to windows 10 on my es1-511 everythin working ok but one problem when i boot up form start it takes ages for windows 10 to come on to my screen its very slow takes a few mins to and sometimes takes a few attempts to actually get it on help
janrats1868,
Try running a refresh and see if that fixes it, or you can go back and upgrade again to see if that fixes it.
Maybe you are looking for
-
I would like to create a new billing type : Invoice List Pro Forma because I do not want this document to update FI. I have tried in the customizing SD Document categorie VBTYP = 3 "Invoice List" and transaction group = 8 "Proforma Invoices" but it d
-
IPod won't sync with iTunes after iOS8
I already posted about this but I will post again since I didn't receive any replies. I don't know if there is any way to contact Apple directly about this without having to fork up some money. My iPod Touch 5 will not sync with iTunes ever since the
-
Passing select-options to method of class
Hai friends, Could u please tell me how to pass select-options as parameters to method of a class.
-
FCP 7 upgrade. awkward dimension in iDVD/QTime file
Hi there, we just upgraded to FC7 and everything works fine...but.... when exporting the movie to QT , the aspect ratio of the movie is modified to a different aspect ratio and when using iDVD for making the final movie it looks stretched with 2 gary
-
Can you please tell me how to find top 10 wait events
Hi Can you please tell me how to find top 10 wait events and what actions need to be taken when there is a wait? Thanks Regards, RJ.