XSF Output from the Smartform

Hi,
How do I create XSF output from the Smartform(PO).
Appreciate your reply.
Thanks,
Ramesh

hi ramesh,
below is the link i found some information about XSF output.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/28d3b6d26211d4b646006094192fe3/content.htm
reward me if useful.......
thanks,
gupta pullipudi

Similar Messages

Error message by periodic weekly: No output from the 1 file processed

Hi there,
since four weeks, I got a problem with the maintenance script periodic weekly. Up to December 22nd, the script did, what it should do: rebuilding the database of locate and whatis, rotating log-files. Since one week later, I got the error message: No output from the 1 file processed.
Normally, I use Anacron to do the job. When I noticed the problem, I tried to start the script with Tinker Tool System getting the same result. Another try using the Terminal (sudo periodic weekly) also failed. The commands locate and whatis are working, locate.updatedb and makewhatis also. I'm running 10.4.8; in the past, I did not have such problems. Anyone with an idea or solution?
Thanks
Klaus
MacBook Pro Mac OS X (10.4.8)

Hi Gary,
here is the output you were asking for:
Last login: Thu Jan 25 20:03:55 on console
Welcome to Darwin!
DeepThought:~ dirk$ sudo /private/etc/periodic/weekly/500.weekly; echo $?
Password:
Sorry, try again.
Password:
Rebuilding locate database:
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
makewhatis: /usr/share/man/man1/fetchmailconf.1.gz: No such file or directory
Rotating log files: ftp.log lpr.log mail.log netinfo.log ipfw.log ppp.log secure.log
access_log error_log
Running weekly.local:
Rotating psync log files:/etc/weekly.local: line 17: syntax error near unexpected token `)'
/etc/weekly.local: line 17: `if [ -f /var/run/syslog.pid ]; then kill -HUP 0 80 79 81 0cat /var/run/syslog.pid | head -1); fi'
2
DeepThought:~ dirk$ ls -loe /private/etc/periodic/weekly/500.weekly
-r-xr-xr-x 1 root wheel - 2532 Jan 13 2006 /private/etc/periodic/weekly/500.weekly
DeepThought:~ dirk$
It seems, Rogers idea, PsynX respectively the deficient uninstalling by me is responsible for my problems, is correct. Should I remove the whole file weekly.local or should I only remove the content? I prefer removing the whole file, because it was created while installing PsyncX. The date of creation is the same as the date of installing the app (December 25).
Klaus
By the way: it seems to me, the solution of my problem is in sight. So I want to thank you all for the amazing aid I got from you!

What are the characteristics of the sound output from the speaker iPad3?

What are the characteristics of the sound output from the speaker iPad3?

man -s4 proc
or
http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
process whose procfs directory is being accessed.
tim

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

I am not getting any output from the speakers of the ipad. However the sound is ok if i use headphones. Can anyone help?

1. Check the Side Switch
http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg
2. Double-click the Home button and swipe to the right and check volume control
http://i1224.photobucket.com/albums/ee374/Diavonex/ea5b842d.jpg
3. Settings>Notification>Game Center>Sound>ON
http://i1224.photobucket.com/albums/ee374/Diavonex/67a15edf.jpg

Does anyone know how to convert the output from the standard report to xml?

Does anyone know how to convert the output from the standard SAP report to xml?

since it a standard report which you cannot modify you can only do the following.
submit report exporting list to memory
then
list from memory and then
use the returned itab along with CALL TRNSFORMATION key word to convert to xml.
but this only going to place the whole list content (including data and formating lines,etc) into a xml element and not the actual data alone in the list .

No audio output from the orange mini j

Hi all,
I am having problem with my Audigy 4.
Hope you know what I mean, there are three 3.5mm mini jacks
of three different colors: green, black, and orange.
I have noticed that there are audio outputs from the green and black mini jacks only, while the orange mini jack seems to be not working at all.
When I plugged an earphone line to the orange mini jack,
I could hardly hear any sound from it.
Any idea?Message Edited by kwfine on 07--2007:03 AM

The orange jack is the center/subwoofer audio jack. If you're using a 5. speaker system. Make sure you have selected 5. speaker setting in the speaker setup software.
Jason

Analogue Stereo Audio Output from the New Mac Pro

Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)

It is line-level. You will need powered speakers or an amplifier.

Triggering smartform output from the report program

Hi,
I have developed a new report program.The selection screen of the report program is like this.
plant:    ________
warehouse: ___________
sheet #:      _________ to _________
bay/bin:      ___________ to __________
building:     ___________ to __________
counter sheet printer: __________
Auditor sheet printer:   _________
When the data for sheet#,bay,building, counter sheet printer is given,then the counter sheet smartform has to be output on the screen.
or
When the data for sheet#,bay,building, auditor sheet printer is given,then the auditor sheet smartform has to be output on the screen.
Is it pessible to trigger the smartform from the selection screen of the report.If so can anyone send me a sample code for that.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = <smartform name>
    IMPORTING
      fm_name            = v_form_fm
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
Call Smartfrom to print the document
CALL FUNCTION v_form_fm
    EXPORTING
      p_compensation   = p_comp <--parameter list
      p_skill          =         p_skill
      p_deci_auhtority = p_da
    TABLES
      s_job            = s_job         <--select option list
      s_level          = s_level
      s_date           = s_date
        EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
declare the paramters of your selection screen in the form interface section of the smartform.
If you have a parameter in teh selection screen then declare it in the smartform as:
P_matnr     TYPE     matnr (in form interface -
                                                 >import)
If you have a select option then
S_LEVEL     LIKE <dictionary structure like a range>
this u declare it in the tables section of the form interface. For the select option , the dictionary sructures should be like a range (see RNGE_OBJID as an example). If you dont have a dictionary structure
then u need to declare it in the dictionary.
REWARD IF HELPFUL

How can I print to file (simple output) from the print dialog? Not PDF or PostScript

Hello
I do quite a bit of work in virtual terminal (SSH) and I tend to pull enormous amounts of data that need to be saved to a *.txt file. This needs to have ZERO formatting, as it is simply data extracted from a data base (CSV, tab delimited, etc). This information is then formatting through the use of other applications (excel, access, etc). By zero formatting i mean, no text wrap, nothing! It needs to be a text based pure database output.
I cannot use Print to PDF
I cannot use Print to PostScript
both of these include formatting, and erroneous data that would require me many hours to clean up the data by hand. On a Windows based PC you can simply install a "Print to File" printer through your printer setup menu.
I've spent many hours searching online and other seem to need this same exact type of output.
The closest thing i've been able to do is create an automator file that upon printing converts the PDF into a text file. This doesn't work as it retains the formatting per the original PDF document. This also doesn't seem to help as some outputs are 30mb in size.
If anybody could assist with this that would be awesome. Thanks!

It looks as though you need a netgear router to use this and we have a btinternet router so it won't work
The word is that this suggestion will work with any router.
I did not see the brother printer listed.
List of supported AirPrinters.
   http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links, see Texas Mac Man list:
https://discussions.apple.com/message/21291967#21291967
iPad Print Applications supplied by printer manufactures -- usually free:
Brother iPrint&Scan
    http://itunes.apple.com/us/app/brother-iprint-scan/id382775642
Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
Software for your computer's printer:
Mac and Windows
FingerPrint
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/

HT4437 using airplay from my ipod touch 4th gen. no audio output from the tv. on the ipod it shows that it is streaming to the apple tv. whats the problem

i get the air play icon on my ipod touch. when i click it the output from my ipod stops but i dont get any audio from my tv. whats the problem?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Does Front Panel Audio Work When Using RCA Outputs from the X-Fi Titanium HD PCIe Sound Card?

I see that the rear panel headphone output is disabled when the soundcard RCA jacks are used.
But is it possible to have the front panel audio output work at the same time that the RCA jacks are in use or is it also disabled?
I am willing to tolerate inferior quality audio feeding my monitor and use the RCA jacks for my headphone amp.

I was able to construct a work around for this problem. A Y splitter from the RCA outputs is an option but can degrade the sound because of the uneven load presented to the soundcard.
Ten eleven inch Apevia CVTAUDIOE25 HD Audio extension cables were connected together in series to a SilverStone FP32 3.5 audio front panel bay. The extension cables were connected to the front panel audio connectors on the Titanium HD sound card and then the cables were run out of the computer case and up to the area near my keyboard. I connected the front panel audio bay to the extension cable and the bay sits next to the keyboard. When no 3.5 mm stereo cable is connected to the front bay near the keyboard the sound is normal out of the rear outputs. But when a 3.5 mm audio cable is plugged into the front panel bay audio there is sound out of the SilverStone front panel bay. The sound is still muted out of the rear RCA jacks when the plug is put in the front bay but it is only used when the main audio outputs are not required.
The function for me is that the front bay serves the same purpose that the previous front panel 3.5 mm audio extension cable did.
There are photos of this under a different user name on Audio Asylum PC Audio.

Reports that can be outputted from the system

Hello,
Does IMS5.2 provide any tool to generate reports with indicators like :
� Activity logs, with statistics by account.
� Login and failed login attempts.
� Account activity/inactivity by period.
� Active users trace.
or i need to use a third-party tool to obtain this indicators?
Many thanks in advance

Look in the console or server log from the ALDSP server to verify that this message is coming from the ALDSP server.
Seeing the stack trace would help.
It sounds like either (1) you have not rebuilt/redeployed your DSP application on the ALDSP server (it's possible to develop new data services in Workshop and execute them in the Test View without rebuilding. But it's not possible to use the 'submit' function because the compiled xmlbean classes are required.
First thing you want to do is test the SDO Update/submit in the Test View - so pick any function in that data service, run it in the test view, and click on 'Edit'. Now change something, and click on submit. Did it work? I'm guessing you get the same error message that you saw via service bus. Try rebuilding and redeploying your ALDSP application (make sure it redeploys successfully by messages in the log file). YOu should have the ALDSP logging set to 'Debug' for your application, and also set the WLS logging to Debug so you can see the ALDSP messages.
Btw - you will have the same issue in ALSB 'Debug' as you had when you tried to use the submit function via the JWS Test page. You won't have a DataGraph unless you create one manually.
Other thing - why don't you open a case with customer support so that you have 24/7 help instead of only help when I check this forum?

How to see "console output" from the java web start ?

Hi all.
I wish to see logging infomation from the client side when using java web start technologie (java1.6 version).
Please help.
Thak's

Use the "Advanced" tab of the Java Control Panel to turn on "tracing" and/or the Java Console.
see:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/troubleshooting.03.06.html
/Andy

RH9 - Any idea why generating printable output from the Command Line doesn't include images?

I have a batch file that creates a printable output of our main documentation broken up into 36 separate documents, 1 per chapter. Each chapter is a separate layout. I realize that RH has its own Batch building process, but the reason for me doing it through the command line via a batch file (.bat) is that RH keeps taking focus from my mouse and it makes it difficult to do any other computer work while the RH project generates the printable output for those chapters.
Anyway, RH's Batch build works fine.
But the command line for printable output does not include any of my images in the printable output. I don't know why. The document generates with all the topics fine, but the images are missing. No placeholder box in the resulting Word doc, they just simply weren't included. Has anyone else seen this? Any way to fix it?

All,
I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
Thanks,
Clif Bridegum

XSF Output from the Smartform

Similar Messages

Maybe you are looking for