Xslt output options for predefined entity references

Are there plans to include options for controlling the output of XSLProcessor for predefined entity references?
I haven't read the XSL spec by W3C, but I suppose that when <xsl:output method="html"> or method="text" is set all the XML predef. entity references (&;, ', etc.) have to be output as charachters, not as &apos, &#39, etc.
How is <xsl:output> going to be treated in the incoming version(s) with respect to entity references?
In any case may be it is better to include a programatic way of controlling the output?

I have a similar problem with the ampersand ent. ref. In the xsl file it has to be writen as and entity ref., but in the html output it must appear as character. However in the html file I'm also getting an entity reference.
By the way, are you using xsl transformations for the bulletin board? In the previous post the software translated the ampersand ent. ref. into character, but not so the apostrophe.
And generally can you tell me, how can I prevent the bb software from translating entity references :?)

Similar Messages

Best output options for EX1 XDCAM?

Does anybody have a recommended output option for a 50-minute film edited on a mix of primarily EX1 HD, but including DVCAM?
It needs to go to a post-house for grading and sound mixing.
I want to preserve the 1920/1080i HD quality – so should the video be rendered to one of the FCP codecs and delivered as a digital file, or played out to an HD tape deck?
If anybody has experience of this I’d be glad to hear about it. Thanks.

Ask the post house what they prefer. They can provide better info than a bunch of us Yanks can. They know what file formats/tape formats they can deal with.
Shane

Smartforms: Output Options for Field Contents not working within table

Hello,
to display an amount and its unit I am using &GS_MM_IT_GEN-MENGE(R)& &GS_MM_IT_GEN-MEINS& with a line of a table. Unfortunatly it seams that the output option "R" (right-justified) is not working with the table context. Has anyone an idea, what to do?
Thanx,
Peter

Dear all,
thank you for your suggestions. I have found out, that the output option work pretty well as described in the documentation. The are output options of a field and not of a column! To get a right justified column, I had to change the attribute of the parapraph assigned to the column.
Regards
Peter

Best output option for video when doing adr and vocal recording?

I know this topic has come up before on occasion but I wanted to bring it up to hopefully reach a final conclusion.
Does anyone know the best configuration to use for ADR and other vocal recording in Logic when the mic and screen are in a separate room? The options I've seen so far are:
- Send video via DV firewire to a converter box and then to a monitor. With limited firewire ports already in use for the audio interface and dsp units, has anyone tried daisy chaining or using a firewire hub for dv output to a monitor?
or
- Use a DVI splitter to run to a 3rd LCD monitor(as a 2nd one is already in use) so the regular 'video window' could be dragged across to appear on the vocalist/actor's monitor.
These are the only choices I've seen seen so far but if anyone has any other's or recommendations on which of these to go for, I'd love to hear them.
Cheers
Paul

Anyone?

Issue output options for reprinting output for delivery items

Hi Gurus,
I want to create the new output for delivery but at item level.
There is a standard proceduere available for trigger output at item level.
But I am not able to find the option to re-issue or see the print preview as that is not option is available in the standard menu at VL02N.
Due to this I am not able to debug the code as during triggering the output at item level both the program and script are called in background.
So is there any standard option available at item level to see the print preview as we can at header level.
If you requried any additional information then please let me know. Eagerly waiting for the reply.
Regards,
Sagar

Hi Arun,
Yes I want output to be trigger at the item level in the delivery.
If i tirgger the output that output at item level, i see the ouput as green (ie successful)
but when i got menu and try to issue to output i do not see this output type in the list and shows all header output types only..
Due to this i am not able to debug my program when doing print preview..
So i need a way where i can see the my program in debugging mode.
And VT70 is not useful to me i do no shippment no. but I have only delivery with me.
Regards,
Sagar

Output options for Web module

I have several suggestions to improve web gallery output using the Web and Print modules. First, and most important, should be the options to "Preview and Save", and "Export and Upload". With these options, when an event like an upload error occurs, the entire gallery doesn't have to be re-processed. Example: I attempted to upload a gallery of 400 photos this morning. After an hour or so, the remote server closed the connection causing me to have to recreate the entire gallery from the start, and another hour lost. Having the option to save the gallery locally in addition to previewing or uploading would be really practical.
Second, I'd like to have the ability to add info to the grid pages (html gallery), such as file name or rating. A simple drop down menu in the Site Info column...
Finally, how 'bout the ability to add text to the top of a contact print? Example: say I'm printing a grid of selected images from a shoot. I'd like to be able to add identifying info to the top of that printed sheet as well as file info such as file name with each photo.

Rob,
The 9401 is bidirectional, and when set to input, will function as a tristate output. There are a couple of things to keep in mind with this module: 1) When set to input, the lines still have a weak pulldown resistor with a min. value of 45 kOhms, as specified in the manual. 2) Line direction may only be controlled in banks on the 9401. This means that DIO 0:3 must all be set to the same direction, and 4:7 must all be set to the same direction. I don't have enough information about your setup to know if this will provide a complete solution.
Please post any additional questions, or more details about your application if you're still not sure whether or not this solves your needs.
Thanks,
Kyle Bryson
National Instruments

Output options for NI 9401

I am currently evaluating the CompactDAQ platform as a replacement for some of our older test equipment. In order to interface to my existing test setup, I need a digital I/O module that can tristate its outputs. I was looking at the NI 9401, but cannot tell from the manual if this module can do TTL high, low, and tristate. So, my question is, can you program the 9401 to tristate it's output?
Thanks in advance for any info. that you can supply on this topic.
Rob

Rob,
The 9401 is bidirectional, and when set to input, will function as a tristate output. There are a couple of things to keep in mind with this module: 1) When set to input, the lines still have a weak pulldown resistor with a min. value of 45 kOhms, as specified in the manual. 2) Line direction may only be controlled in banks on the 9401. This means that DIO 0:3 must all be set to the same direction, and 4:7 must all be set to the same direction. I don't have enough information about your setup to know if this will provide a complete solution.
Please post any additional questions, or more details about your application if you're still not sure whether or not this solves your needs.
Thanks,
Kyle Bryson
National Instruments

I can get no sound out of my computer and the only sound output option I see is for headphones. Is that righ or is there something wong?

When I go to Settings and Sound the only Output option for me to select is Headphones. I'm pretty sure there should be other options. Problem? Ideas?

Other options pop-up when you connect devices to the Audio-Out port, like external speakers.
Stefan

Different Output's for PO's

Is it possible to have different Output options for PO in the backend, like for example if PO is created based on PR coming from SRM SC then the output must be of say type 1, but if the PO is created from the back-end PR or with no connection at all to the PR coming out of SRM then the output must be of type 2??, if yes can some one please tell me how ?? thanks in advance.

Hi. You could link your reqs from SRM to a new PO doc type in R/3.
That way the POs from EBP reqs would have a different doc type to other POs created in R/3.
Then you can have a new output type with a new form and use condition records in MN04 and MN05 to point to different outputs per PO type.
An even easier way would be to have different pruchasing groups for your reqs from EBP, and base the output type on purchasing group.
Regards,
Dave.

Driver prg name for predefined form F110_IN_AVIS

hi all,
I need print program (driver prg name) for predefined form F110_IN_AVIS, and also what is the output type for that. T-code for F110_IN_AVIS is F110.
It is related to payment advice.
If u know tell me plz.., or tell me where I have to search the printprg and output type for predefined form.
thanks in adv
vidya

Hi Vidya,
You have the driver program configured against the Company Code & Payment Methods.
You can view it using menu path : Environment --> Display Config.
But some of the driver programs are : RFFOAVIS_FPAYM, you can search in SE38 using RFFO* you will get lots of driver programs.
@ Venkatesh:
The program name you have given is most probably for US. Actually different countries have different driver programs
Please award points if your qn is answered.
Regards,
Suhas

Constraints/Output Buffer for FPGA Pins (e.g. PXI_LBLSTAR0)

Hi anybody,
is there a way to change the output options for the pins provided in the FPGA files?
For example: in the UCF file for the 8711R FPAG Board, there are constraints set for nearly any of the FPGA lines.
<snip>
NET "PXI_LBLSTAR0" IOSTANDARD = LVTTL;
NET "PXI_LBLSTAR0" DRIVE = 6;
NET "PXI_LBLSTAR0" SLOW;
<snip>
What, if i want to change the output driver to HIGH Speed?
Is there a way to do this in the LabVIEW project/VI
Thks in advance for your time.
/Tilman

Hi Tilman,
I am sorry. I asked my colleagues but it is not supported to change this ucf files.
There are several risks involved: Using this workaround will change this setting for any and all VIs compiled from this computer. This will affect any Reconfigurable I/O targets that you compile the VI for. In other words, this could cause problems if you are targetting devices other than the 7811R. There is no indication on the VI that the drive strength has been changed. Therefore, you must keep track of these settings. When changing the Driver Type to a setting other than the default, you are increasing the likelihood of cross-talk between Digital lines. Chaging other options in the toplevel_gen.ucf could cause some undesirable affects.
I hope you will get along with the default settings.
Kind Regards,
Vanessa

Best options for uncompressed HD master?

I've just finished my first feature-length project in HDV on FCP, and I have some questions about output. In the past I've always been editing SD DV under 60 mins, so master output was always easy. But between the HDV and the 90 min. run time, things are a little more complicated.
We shot and edited in native HDV 1080/60i. We've rendered our final master sequence in HD ProRes, but I don't know where to go from here. These are my main questions:
1. My primary distribution is going to be SD DVD, but I want to keep an uncompressed HD master file backed up on multiple hard drives. What's my best output option for such a file? Can I just export a self-contained QT in sequence settings? Will that apply compression I don't want? Is there a better output option in Compressor?
2. Keep interlaced or deinterlace? Again, most people will be seeing this as an SD DVD.
3. I'd also like to get a local video outfit to make an HD tape master for more secure long-term archiving. What tape format is recommended?
4. Question I should have asked but didn't? Please, do tell.
Thanks in advance for any help.
Stu

Ken Summerall, Jr. wrote:
The absolute best quality that you are going to get is by exporting a QT movie using current settings and making it self contained. Since you shot and edited in an HDV sequence this will add no further compression (remember that HDV is already heavily compressed).
Uh-oh. That's not actually correct.
HDV is relatively unusual as shooting formats go, in that it's a GOP format, as opposed to an I-frame format. In I-frame formats, each frame of footage (or pair of fields, if you're shooting interlaced) is compressed all by itself, independently of all other frames (or field-pairs). But in a GOP format, a number of frames are compressed together — that's what "GOP" means: "group of pictures." The first frame is compressed independently, then the next frame is described in terms of what's different from the previous frame.
When you edit HDV +and then export it as HDV again,+ whether to videotape or to a Quicktime, the GOPs must be "conformed." As you edit, you make cuts that break the GOP structure, so the timeline cuts from the middle of one GOP to the middle of another without including the first frame on which that second GOP depends. So when you export or lay off, Final Cut has to go through and convert a bunch of I-frames to B- or P-frames, and convert a bunch of B- or P-frames to I-frames.
In essence, exporting or laying off HDV imposes a compression hit. You will reduce the quality of your footage.
Since the question was about the best option for mastering, HDV is +definitely not it.+ Would it be okay? That depends on the footage, and on how picky you are. But it's not the best option. The best option is to master to a (ha ha) mastering format. Uncompressed 8-bit, Uncompressed 10-bit and ProRes are good choices here.
As for tape … that's tougher. You can absolutely send an uncompressed or ProRes Quicktime file to a dubbing house and get it laid off to videotape, but the question is to what format? HDV is a poor choice, because of the aforementioned compression hit you take when conforming the GOPs. DVCPRO HD would actually be a step down for you, because it would downsample your 1440x1080 native footage (or your 1920x1080 master, if you chose to upres) to 1280x1080.
That leaves HDCAM and HDCAM SR. If you've done things like color correction or compositing in a 10-bit color space — or even long-slow dissolves to or from black, which is one of the places where 8-bit really falls apart on you — choose HDCAM SR. HDCAM is an 8-bit format only, and you'll lose color precision if you go to that format. But if you stayed 8-bit all the way through your workflow, then you can go to HDCAM without any real problems.
Note that both HDCAM and HDCAM SR +are compressed formats.+ Your only option for uncompressed HD videotape is D6, and good luck finding a Voodoo recorder nearby. But HDCAM and SR are good enough for professional mastering, so they'll surely be good enough for you as well. And they're both available in 94- and 124-minute lengths, so you can master your whole feature on a single tape.
(While you're at it, consider getting your uncompressed or ProRes master file dubbed off to a data tape format as well. You worked really hard on this project, so it makes sense to be a little paranoid about preserving the fruit of your labors.)

Options for Displaying Reference Attribute in AdvancedTable Record

Hi,
I'm looking for options for including reference attributes within an advanced table records as just another column. Specifically how can I include a lookup meaning column in a detail advancedtable component when the lookup meaning is not in the VO?
Some options I've thought of are:
1. Change the VO to be defined with the lookup meaning by using "Expert Mode" and adding the joins. This will not work because I need to change detail VO attribute via a controller/am method and (due to a bug) the change will not be saved to the database.
2. Create an EO for the lookup entity and an AO to associate the detail EO with the lookup EO. Then create a VO that is based upon both of these entities. The problem I ran into with this option is that when the lookup code in the detail VO attribute is changed OAF tries to look for the old lookup code record in the detail VO and it will not find it and throws a error on the page.
3. Create another detail advancedtable component in the detail VO advancedtable component. Since I need the value within the detail advancedtable record and this would place it in a new detail this will not satisfy the requirement.
Thank you

If UOM is also changed with qty then old & new UOM should be available in CDHDR & CDPOS.
If not then display current UOM.
This logic will fail if UOM is also changed several times without changing Qty, which normally does not happen. So you can confirm with business, if this much info is enough.
Making logic to work in case UOM is also changed several times, would require quite complex logic & will affect performance badly.

Drop down option for an output field in an ALV display

hi,
how to provide a drop down option for a field in the output of an ALV Grid display........
Thanks in advance

Hi Deepthi,
Please refer this program BCALV_EDIT_07 and BCALV_EDIT_06.
This will help you in your program
<b>Reward Points if Useful</b>
Thanks
Vishwanath Purohit

Additional appearance option for cross-references

There should be a way to leave off the "preamble" part ("Figure", "Table", etc) of a paragraph number in a cross-reference. So instead of writing things like "As shown in Figure 5 through Figure 9...." we could write "As shown in Figures 5 through 9....." i.e. the cross refence would just be the numbers 5 and 9 without the word "Figure" that ID4 now considers to be part of the paragraph number.
A viable alternative would be to allow paragraph numbers to appear in the interior of the paragraph rather than only at the beginning. Then figure captions could be written with the word "Figure" as part of the text, followed by the purely numeric figure number, then followed by more text comprising the rest of the caption. Then a crossreference would only pick up the number without the word "Figure".

Exactly. They're deselected, thus my question. So to get back to my original post, it looks like the designers of CS4, even though they have provided 19,762 options for searching (plus those in cross-references), none of the options will allow you to start at the front of a book and find each cross-reference in turn to check that they jump to the right page.
Sometimes I think that the designers of InDesign really haven't got into the spirt of Book. They've offered it, but half-heartedly. But that will be the subject of another post.
So, I'll repeat my question: is it possible to search for cross-references?

Xslt output options for predefined entity references

Similar Messages

Maybe you are looking for