XSLT_TOOL Standard Error
Hi experts
i'd like to know if is there someone who founded some standard error during the saving of a Survey in SRM 7.0
The transformation with XSLT dosen't fill the last symbol ">" at the end of the page and i'm going to do handly every time.
No OSS notes about it.
Help please
regards
andrea
solved by me
Similar Messages
-
How to calculate standard error in Numbers
How to calculate standard error in Numbers?
Urbinan,
STDEV will estimate the stardard deviation based on your sample and STDEVP will calculate the standard deviation of your entire population.
Jerry -
Hello Everyone,
When ICF is generating standard error message (e.g. ABAP WebDynpro app fails to be opened within a timeout), it uses German language for all languages other then English. All the languages in question have been defined in SMLT, supplemented by EN and had their lang packages imported. Can somebody please help to understand how to localize the ICF standard error messages to use at least EN language while showing them. (for English language error messages displayed correctly in English)
SAPGui localization for these languages work fine so that makes me feel language packages are imported properly. As for ICF localization issue, I would be ok if English error message would be displayed for such languages.
Ideally a solution should not include manual translation (e.g. via SE63/ SE61)
Regards,
MikeHi Antonio
Try using locales. Check the following document,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58a7e390-0201-0010-abb1-8eec7eb7a2ec
Sameer -
Hi Gurus
Can some body provide
1) what are the standard errors during the implementation/upgrade?
2) how to rectify them.
Thanks and RegardsHi charlie
what i mean to say is that the frequent errors during implementation/upgrade
not specific to one industry (general) and i am just looking for the list of errors.
Errors of i) masters ii) transactions iii) reports iv) runtime
v) cross application etc.,
need some help or material related to the same -
Standard error of mean for column/bar graphs
Hi,
Is it possible for me to have different standard errors in a column graph? (i.e. in a graph with 2 or more columns/bar to have their individual error bars drawn out?) So far I have only been able to have a single number for both columns in the graph.
VV,
Numbers does the best it can with the information you give it. If you ask for Error Bars, Numbers will calculate the standard deviation for the series and assign that calculation result to each of the bars in the series.
If each of your values represents some statistic that in itself is accompanied by a standard error, that's another thing, but Numbers doesn't know what the error values are unless you tell it. The way to tell Numbers what the error bar values should be in these special cases is to use Custom values.
Here's an example:
I like to use the Scatter Chart, but you will find similar controls for the bar chart.
Jerry -
Hi all
Can you please help me with some information on <b>standard errors list</b> that occur in MAM, checked with the error handling of MAM 2.5 it only had 1error scenario
regards
samHi Sam,
Actually I am not aware of such list and if there is such list exposed by SAP at all.
Anyway, for MAM I think it is a good idea to have a look in the file WEB-INF/classes/MAMText.properties (or directly in java/MAMText.properties, if you
have the sources). In this file you can search for the property keys' strings containing ERR inside e.g.
NOTIF_ERR_MISSING_CAU_NOT=Missing cause notification number
I think this is a straightforward task and you will get the complete(?) list of non-runtime
errors in MAM.
Best Regards,
Lalo -
I'm exploring Flex as a candidate to use for developing a web application that displays many graphs. The data displayed on the graphs are discreate values with associated stardar errors. I need to display the standard errors as an error bar - similar to how MS Excel displays error bars. Can anyone tell me if this can be done with Flex?
V,
Numbers does the best it can with the information you give it. If you ask for Error Bars, Numbers will calculate the standard deviation for the series and assign that calculation result to each of the bars in the series.
If each of your values represents some statistic that in itself is accompanied by a standard error, that's another thing, but Numbers doesn't know what the error values are unless you tell it. The way to tell Numbers what the error bar values should be in these special cases is to use Custom values.
Here's an example:
I like to use the Scatter Chart, but you will find similar controls for the bar chart.
Jerry -
Hello experts,
I am to develop the Release strategy type configuration for VA01 tcode ( SD). For which i have added fields in table vbak. These are checkboxes (the ones that i have added in the Table VBAK). So in the layout have not assigned any function code for them .I have created 2 authorization objects and asigned users to them creating roles in PFCG.everything related to my code is going fine. But i am getting a Standard Error when i tick on the checkbox . Message class V0 and Msg No. 104.This is my code Please help me out.
IF sy-tcode = 'VA02'.
BREAK-POINT.
if vbak-zzchk1 = 'X'.
AUTHORITY-CHECK OBJECT 'ZOBJ1' ID 'ACTVT' FIELD '39'.
AUTHORITY-CHECK OBJECT 'ZLEVEL1' ID 'ACTVT' FIELD '39'.
IF SY-SUBRC <> 0.
MESSAGE 'You Are Not Authorized To Use This Transaction' TYPE 'E'.
MESSAGE E999(ZM) WITH 'You Are Not Authorized To Use This Transaction'.
clear vbak-zzchk11.
vbak-zzchk11 = 'Level 1 - Approved'.
else.
clear vbak-zzchk11.
vbak-zzchk11 = 'Level 1 - Approved'.
MESSAGE 'Successful' TYPE 'I'.
ENDIF.
ENDIF.
*BREAK-POINT.
IF VBAK-zzchk2 = 'X'.
if vbak-zzchk11 <> 'Level 1 - Approved'.
clear vbak-zzchk2.
MESSAGE 'Level 1 Should be approved first' TYPE 'S'.
endif.
AUTHORITY-CHECK OBJECT 'ZOBJ2' ID 'ACTVT' FIELD '39'.
IF SY-SUBRC <> 0.
MESSAGE 'You Are Not Authorized To Use This Transaction' TYPE 'E'.
ELSE.
clear vbak-zzchk22.
vbak-zzchk22 = 'Level 2 - Approved'.
MESSAGE 'Successful' TYPE 'I'.
ENDIF.
ENDIF.
ENDIF.Hi,
You will have to do this in transaction VFBS.
Also, go through the link below:
[VFBS in Sales Order |VFBS in Sales Order;
KR Jaideep, -
Hi, I'm developing an application and in case of exceptions I try to provide the user with well defined error-codes, eg one error code 2910 for "File not found" etc, which is far more exact than just an error message. I was wondering if anyone knew about some standard error codes defined that are commonly used in programs. So that I don't have to come up with it myself if someone have given it deep thought for good structure, understandability etc.
GilSo best thing you could do is, put all your possible errror-codes into the class that might produce them and make sure you document them ! like :
public class couldProduceErrors {
* Constant for Error : I ordered a beer but didn't have any money. This value is retuned by method
* getMeABeer if and only if .......etc ....bla
public static final int ORDERED_BUT_NO_MONEY=-1;
* Constant for Error : I ordered a beer but I'm not old enough to by one. This value is retuned by method
* getMeABeer if and only if .......etc ....bla
public static final int ORDERED_BUT_TOO_YOUNG=-2;
//the code of your class from here on
}Running this through javadoc will provide the information to the developer and he will appreciate it.
The actual value you choose are irrelevant to the user (as long as they are unique). If you like you can choose only negative value for a quick check if any error has happend.
int result =getMeABeer()
if(result<0) {
switch(result) {
//process error
else
//drinkBut if you insist here's an excerpt from the file errno.h in the linux Kernel, I find these codes hard to remember, but there are a lot of people who have it on their machine:
#ifndef _I386_ERRNO_H
#define _I386_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Argument list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
//THIS GOES ON FOR QUITE A WHILE -
Hi,
I have a Internal table from which i need to update to a DB table. while Inserting or modfying record to DB table,I need to capture the standard error message. For ex.. PErsonnel number is Locked.
And i need to dispaly all these error message list in a report.
My Q is, How to get the standard error message.
Thanks,
Kanal.Hi,
call function 'HR_INFOTYPE_OPERATION'
exporting
infty = '0416'
number = p0416-pernr
subtype = p0416-subty
objectid = p0416-objps
lockindicator = p0416-sprps
validityend = p0416-endda
validitybegin = p0416-begda
recordnumber = p0416-seqnr
record = p0416
operation = 'EDQ'
nocommit = nocommit
importing
return = error_message
key = pakey. -
Standard error function (excel STEYX)
hello al
is there a vi to do the same like the standard error in excel: http://office.microsoft.com/en-us/excel-help/steyx-HP005209284.aspx
or is it the standard deviation vi? (but then, how to use the 'input data point' to point to an array?)
thanks in advancePlease refer to Note 721793 - Problems with MS_EXCEL_OLE_STANDARD_DAT.
- Guru
Reward points for helpful answers -
Capturing various standard errors using openscript
Hi , we have automized a scenario using openscript where in the steps are like starting from creating requistion --> Req approval --> PO creation and approval --> Receipt Creation --> Invoice Creation and then quick payment.
when we playback the script it works fine with valid data inputs from databank. But we want to capture all the standard errors if any occurs in between when script playback. For eg : if Invoice batch name entered already exists in system it throws a warning like name already exists. At this step scripts fails but it capturing some error which end user wont understand. By anyway we can capture all the standard errors that can occur during functional testing. I mean we cannot write custom exception for each situation and may not what kind of errors we may face. So is there any way we can capture all the standard errors during functional testing using openscript/OTM. The platform we are using is Oracle Applicaitions ERP R12, open script 12.2Enter your codes in try and mention code like following in catch
try{ }
catch(Exception e ) {
String pageindex = web.getFocusedWindow().getAttribute("index");
if(web.element("/web:window[@index='"+pageindex+"']/web:document[@index='"+pageindex+"']/web:div[@text='Error']").exists()){
fail(web.element("/web:window[@index='"+pageindex+"']/web:document[@index='"+pageindex+"']/web:div[@text='Error' ]").getParent().getAttribute("text"));
else if(web.element("/web:window[@title='Oracle Applications R12']").exists()){
forms.captureScreenshot();
think(2.169);
String statusBarMessage = "";
if(! forms.getStatusBarMessage().equalsIgnoreCase("")){
statusBarMessage =""+forms.getStatusBarMessage().toString();
if (forms.choiceBox("//forms:choiceBox").exists()) {
fail(" Unexpected choicebox found:- "+forms.choiceBox("//forms:choiceBox").getAlertMessage()+ (!statusBarMessage.trim().equals("") ? (".... \t Statusbar message: "+statusBarMessage) : ""));
} else if (forms.alertDialog("//forms:alertDialog").exists()) {
fail(" Unexpected alertbox found:- "+forms.alertDialog("//forms:alertDialog").getAlertMessage()+ (!statusBarMessage.trim().equals("") ? (".... \t Statusbar message: "+statusBarMessage) : ""));
} else {
fail(" Failed during script playback : " + e.getMessage()+(!statusBarMessage.trim().equals("") ? (".... \t Statusbar message: "+statusBarMessage) : ""));
else {
fail(" Failed during script playback : " + e.getMessage());
Cheers,
Deepu M
[email protected] -
Calculating Standard Error from Linest
I graphed some data as a bar chart and included positive & negative standard error bars. When I try to have the calculation of standard error in the associated data table, I find that the only function available is the standard deviation, which is related but not the same. My understanding is that the Linest function will produce an array of numbers, one of which is standard error, but I cannot figure out how that function works. How is the array produced? I tried inserting the Linest function in a cell of a table separate of my data table but it only put the number which is in the A-1 cell of the array shown in the Linest explanation and I don't understand how the rest of the array is filled out. The standard error for Y, which is what I am trying to obtain, is in cell B-4 of the array as I recall.
S,
If you open the Function Browser and select LINEST, under Usage Notes you will find a link titled "Additional Statistics". The linked content includes a map of the LINEST array. Use the INDEX function to access the element of the array that you are interested in. You may need to read the INDEX function description to know how to use it.
Jerry -
How does System Exec VI identify Standard Error within cmd code?
I am using the System Exec VI to control a USB to serial adaptor program header, I have sucessfully written a .BAT file to call the CMD commands (the .exe I am running uses "-option" commands and the help file reccomends to do so) and it functions perfectly. My only issue is identifing errors. The "Standard Error Out" on the System Exec VI never outputs anything. Yes the wait until completion is TRUE and my standard output functions fine. I am curious as to how the System Exec VI identifies errors from the command prompt and why my errors are not showing up. I am currently using multiple match pattern string functions to identify the possible errors from my standar output for the time being but I would like to simplfy my code a bit and clean it up if at all possible. Not to mention there are most likely several other errors that could occur that I may have not identified. Some examples of stanadrd output errors i can get include include:
{C:\Documents and Settings\owner\Desktop\RACK LINK>C:\DCRABBIT_10.66\Utilities\clRFU.exe "" -s "0":115200 -v -vp+ -usb+
.bin not found
C:\Documents and Settings\owner\Desktop\RACK LINK>pause
Press any key to continue . . . }
or
{C:\Documents and Settings\owner\Desktop\RACK LINK>C:\DCRABBIT_10.66\Utilities\clRFU.exe "C:\Documents and Settings\owner\Desktop\RACK LINK\Calibration_v030.bin" -s "4":115200 -v -vp+ -usb+
Rabbit Field Utility v4.62
Installing Calibration v0.3.0
Sending Coldloader
Error: No Rabbit Processor Detected.
C:\Documents and Settings\owner\Desktop\RACK LINK>pause
Press any key to continue . . . }I think you should use error handling in batch programming, see this link http://www.robvanderwoude.com/errorlevel.php
CLA 2014
CCVID 2014 -
Customization of Portal Standard Errors Like 403, 503,404
Hi All,
I am trying to customize portal standard errors, I was able to customize 404, 500 errors with the help of sap note and it is working fine in some scenarios and failing in some scenarios. Lets say
If i have some thing like http://host:Port/irj/porsdanf its giving me custom error instead of 404, if I have
http://host:Port/idg its giving me 404 error instead of custom error. In the same way If I try to access some files its giving Portal Runtime Error. Is there any way to stop all these and have a custom message.
Regards
PraveenCan you please tell me which sap note did you apply to get the 404 working initially.
-Shekhar
Maybe you are looking for
-
Help with math / calculations in RTF templates
Greetings, I know that there are math capabilities in the templates... I've seen the code samples in the Core Components guide. What this doesn't tell you is WHERE these things would go in a template. And... that... is my question. We are just starti
-
How do I move up one folder while browsing Time Machine?
When I'm viewing a folder in Time Machine's "Star Wars" view, how do I move up one folder, to view the current folder's parent folder? In Finder, I have several ways to do it: I could either hit CMD+Up Arrow, or CMD-click the title bar then click on
-
3TB external drive appears to be 801,23GB
I just bought a Western Digital 3.0TB caviar green disk drive and plugged into a Freecom Hard Drive Dock Quattro with the provided FW800 cable and the disk appears to be 801,23GB on OS X Lion. I have tried to reformat with Disk Utility but nothing ch
-
Printing problem in ABAP report
Hi All, I have a ABAP report with line size 225 and line count 65. We are taking print out of the report on Dot matrix printer. When taking the printouts, while going in to the 3rd page the logo on the top of the page is getting printed on the data a
-
HT201077 How do I get my shared photo streams from my ipad to my iPhone?
How do I get my photo streams from my ipad to sync to my iphone?