XTier Service Manager Causing Delay In Windows Explorer

Before I get into too much details...
Novell XTier Service Manager causes delay displaying folders in mapped drive. This happens in Windows Explorer when I click on any mapped drive OR when I click on My Computer.
This happens after about 10min+ of "idling".
Stopping Novell XTier Service Manager makes this delay go away immediately.
Any type of help will be greatly appreciated... I'm really out of things to try...
I have Win7sp1x64 with Client 2 SP3 installed.
Thank you.

It might help to change the provider order, such that "Microsoft Windows Network" is placed above "NetWare Services" See TID 7000693.
http://www.novell.com/support/kb/doc.php?id=7000693
Earle Wells
Novell Technical Services
>>> wonrhee<[email protected]> 7/10/2013 7:36 PM >>>
It's Netware 5.1 and I don't even log into NDS.
Installed freshly downloaded Client2 with Computer Logon Only setting.
Then log into AD which maps few drives to Win2008 file server. Again,
not logging into Novell...
I see that XTier Service is running... Click on Start->Computer, click
on one of the mapped drive or My Computer... Bam, there is a delay of
about 4-8 second before any folders show up.
If I stop XTier Service, this delay behavior disappears.
No error logs, tried Client2sp1,2, and 3; same delayed action showing
folders.
This forum section has the most threads about NClient2 issues, hence
here I am.
I just don't know where to go from here... Winxp clients work just
fine... Of course that's with different Client version.
I do have just handful Win7x64 that works wonderfully...
wonrhee
wonrhee's Profile: https://forums.novell.com/member.php?userid=77386
View this thread: https://forums.novell.com/showthread.php?t=468107

Similar Messages

How to Upgrade Service Manager 2012 SP1 with Windows 2008 R2 to SCSM 2012 R2 with Windows 2012 R2

Hi,
We are using Service Manager 2012 SP1 UR2 with Windows 2008 R2.
I am planning to upgrade Service Manager to R2 with Windows 2012 R2. I found the steps to upgrade SCSM 2012 Sp1 to R2 but need assistance to upgrade with 2012 R2 OS.
Please suggest how to achieve the above mentioned objective.
Regards, Syed Fahad Ali

Virtualization solves this problem handily, by allowing you to create a new server to run the new program on the same hardware. it also solves the related problem of moving off unsupported hardware without changing OS or application. VMware is my personal
favorite, but Hyper-V, Xen, and VirtualBox all have similar capabilities.
Compare the cost of work and confidence in success of a upgrade, where any of thousands or millions of uncontrolled settings could cause an issue, to the cost of work and confidence in success of installing a new OS instance and configuring a known state
for the new environment.
In short, upgrades should no longer be a thing. there are just too many ways they can go wrong, and it's far too easy to create a new OS with minimal expense and effort.

Transfer media to iPod w/ simply file manager app (e.g., Windows Explorer)

I like my iPod. But I wish I could sync/transfer media (songs and video) onto it without having to use special sync/management software (e.g., iTunes, Songbird, Banshee) to do so.
I wish I could use just a regular file management application such as "Windows Explorer" or Nautilus.
Is there a way to hack the iPod to make it do what I wish?

Is there a way to hack the iPod to make it do what I wish?
iTunes gives the music odd file names and the iPod reads the music via these file names. Using Windows won't create the file structure hence no ability for the iPod to read and play the music.
I believe some software such as Sharepod might do what you want.
http://www.sturm.net.nz/website.php?Section=iPod+Programs&Page=Sharepod

Error Starting Service Manager 2007B patch 10 Windows Server 2008 64 bit

Hi All,
I am trying to do a new installation of SAP Business One 2007B patch level 10 with a operating system of Windows Server 2008 64 bit and SQL Server 2008. Installation of Server, Server Tools and Client sucessfully happened without any errors but when I am trying to open the service Manager its giving me an error as ServiceManager.exe has stopped Working and when I click on view problem details the follwoing is the error details :
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     ServerManager.exe
Application Version:     0.0.0.0
Application Timestamp:     49af579d
Fault Module Name:     B1iEventSender.dll
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     49af5783
Exception Code:     c0000005
Exception Offset:     00033482
OS Version:     6.0.6002.2.2.0.274.10
Locale ID:     1033
Additional Information 1:     fd00
Additional Information 2:     ea6f5fe8924aaa756324d57f87834160
Additional Information 3:     fd00
Additional Information 4:     ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
I tried to reinstall the Server Tools but still the problem remains the same.
Can you please advise whaty might be the mistake or problem from my end.
Regards,
Venkat

Hi,
Modify license server from add/remove program but do not check the B1i event sender in the select feature.
Probably, the B1i event ender is not installed correctly.
Rgds,
JimM

New hard drive shows in Bios and device manager but not in windows explorer in windows 7

I have added a new sata 500gig hard drive and it is recognised in the bios, but is not recognised by windows explorer, though the disk is showing in device manager as a hard drive . I have followed the example on the forum by going to computer management and rescanning disks, to no avail.
Any ideas how I can get to use the drive?
My comp is a packard bell and all the details are here:- http://support.packardbell.com/uk/item/?sn=845014390330&g=1400
Hope someone can help.
Rob

Thanks Dale (and everyone else). A cure! Sorry I did not reply earlier, but have been trying all known fixes to no avail... However. The second of your links in the last reply of yours (starting, New Drive or mapped network drive) worked with a slight variation in windows7, as follows is how I achieved joy.
Right-click My Computer , and then click Manage .
Under Computer Management (Local) , click Disk Management .
This far is as above, then I'll add comments to the existing help to show my variant.
In the list of drives in the right pane, right-click the new drive and then click Change Drive Letter and Path(s) .
Here it still did not show the drive in the right window, but below it there is a second window listing disks and one of them unallocated and without a drive letter was my new drive. IMPORTANT! This set of info may not be apparent unless you enlarge the box by dragging it, as the default only shows the top box (so I have missed it until now on all my searching). Right clicking on this gave a set of obvious choices to create a choice of drive letter, format and options (NTFS etc) and this created the drive for me. I am sorry I am vague on the box choices, but on right selecting a live drive it doesn't bring up the "unallocated" box choices again. Many thanks and I hope my variant helps anyone else with a similar prob. Thanks again - Rob
Click Change , and in the drop-down box, select a drive letter for the new drive that is not assigned to a mapped network drive.
Click OK , and then click OK again.

Does windows azure service management APIs work for windows azure pack setup as well ?

Does Service Management REST APIs(http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx) for Azure work with
Windows Azure Pack as well ?

Hi,
Windows Azure Pack is basically a proof of concept.
So, it will not have all the features that Windows Azure has in the cloud.
Some services such as Cloud services & storage services are not available.
for some available API support:
If you found this post useful, Please "Mark as Answer" and "Vote
as Helpful".
Best Regards, Tuan Khalib

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1<sup>st</sup> of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace:   at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
   at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
   at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
   at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
   at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

"Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

Hello,
I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
I'm running Windows Server 2008 R2,
Any ideas?

Hi saeedawadx,
Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
The following related article will give more helpful tips,
The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
Trouble Connecting to Cluster Nodes? Check WMI!
http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Click wheel ipod freezes up windows explorer/delayed write error

Sorry for the length of this, but I have been dealing with this for a while.
I have two 5G 20GB iPod's that I can't sync to either of my computers.
I usually sync it on my desktop, which is a P4 2.4Ghz, 512MB, XP PRO, MoBo is Asus P4C800, I would connect them with the firewire connection directly from the back of the motherboard.
My iPod's Hard Drive failed. So I replaced it with another Toshiba Drive (MKGAL2006). It didn't have the apple logo on it, but I read that it really didn't matter. When I plugged it in, it immediately detected at first, but when it was auto-updating music, it would get to about 2/3rds of my music library (13 G's) and then I would get an unknown error -124 from iTunes. I would then eject the ipod from itunes, and eject it from the windows menu. When I would check to see what music made it onto my ipod, none would be listed. When I reconnected it, it showed in itunes that I had 9 Gigs of "Other" data on it, but none of it was music. I would then set the ipod to manual update. This locked up the computer, and wouldn't unlock until I unplugged the ipod from the firewire cable. The ipod would then lock up the computer the second I plugged it in, so I put it in disk mode. I would then need to restore my ipod when I plugged it back in. I was then able to upload music to it, however, I couldn't transfer more than 25 songs at a time without getting a "Unknown error -124" from itunes or "Delayed write failure" from windows. I was getting pretty far along with this system, until I finally got a BSOD, with a memory failure error, and memory dump. But there was no program specified. Now, when I plug it in, it shows as removable drive (E:), autoplay will run for 10 minutes, and itunes becomes unresponsive, as will my computer. When I right click on the ipod in my computer, it says the drive cannot be accessed or is unresponsive.
I tried my girlfriends ipod after this on her profile in windows. It followed the same process, during auto sync it would get to a 2 GB's of data, and then get error -124 in itunes. It was showing up as the name of her ipod, however in my computer. When I ejected, switched to manual, then reconnected, it now shows as removable disk in My computer.
I then tried it on my TOSHIBA laptop (1.5 Ghz Celeron, xp home, 504 MB memory,) through the USB cable and fresh install of itunes (7.41).
Mine made a connection, I had to restore it, and it began to sync up music, it got to 2.5 Gigs, and then I got a windows explorer message saying there is no disc in the drive, please insert one. I was able to eject the IPOD (as it was listed in itunes, but I named it something else when I restored it)from itunes, but ejecting it from windows froze up the system tray, and after waiting 15 minutes, I eventually just unplugged it.
I tried my girlfriends ipod, and it was able to install in windows, but won't get listed in itunes, but itunes is responsive.
I am very frustrated with this. Please let me know if there is any vital information with this that I am missing
Thanks in advance.

Allright,
So I tried sticking my girlfriends ipod back into the laptop through USB for a couple hours. iTunes locked up, and the iPod got hot. So I disconnected it manually, and I got a unhappy face, that wouldn't reset no matter what. In frustration, I just left everything alone for a couple days.
I found out online that people were having success with these unhappy ipod faces by slapping the back of the case after they hard reset the ipod (press menu and select). So I did just that. And it worked. The ipod was back up and running. I plugged it into the laptop, and it updated itself. iTunes warned me that it was preselected for another library, so to add any music, it would go into another playlist as a secondary library. However, it only added music that wasn't on there before. So Boom, I got one iPod working.
The one I had, whose HDD I replaced, wasn't so lucky. I was still getting stuck restoring it, then hooking it up, and it updated several gigs of music (very slowly) and then would freeze up itunes, and I would have to disconnect. After having read on some forums (I highly recommend you read http://www.notpopular.com/blogs/josh/2005/12/24/replacing-the-hardrive-of-an-ipo d, the comments taught me a lot) that reconnecting the IDE cable on their hard drives got rid of the unhappy faces and folder icons. So I cracked open my ipod, and replaced the replacement hard drive with the original one from apple. SOB actually worked. I put the ipod back together, and hooked it into the USB. It updated about 3000 songs, and showed that sync was complete. I unhooked it, but found there was no music listed under songs. Weird. So I set it into disk mode (reset with menu and select, and at the apple logo hold play and select) and plugged back in, I ejected after 30 or so songs, and found that those 30 songs were listed. I know that disk mode works. So I hook it back in, and I am happy to say that my ipod is working with the original hard drive. I didn't even have to pay the $54 bucks it cost for another drive. I also learned about diagnostic mode ,that isn't written about in the official boards (http://www.methodshop.com/gadgets/ipodsupport/diagnosticmode/index.shtml)
I can check my hard drive, and memory, all sort of groovy tests on there.
And at this point, I am checking out my 3rd generation ipod that I long ago gave up as a hard drive problem. I reseated the hard drive connection and put it into diagnostic mode, which verified my hard drive was fine. So we'll see how that goes.

Ipod causes windows explorer to restart

everytime i plug in my ipod through USB and use windows explorer eg my computer/ my documents it causes windows explorer to restart everytime i open it. does any one else have this problem solved. thank you

The same thing happens to me when I plug in my Iphone 3G. I am running Windows 7

Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes

Hello,
I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged my iPod into my computer, but it only connected to My Computer and didn't connect to iTunes and update my iPod accordingly. So, the iPod is charging and the iPod is showing the "Connected, Eject before disconnecting" screen, but it isn't adding new music (which kind of defeats the purpose of buying new music). I thought it was because I was using 9, so I downloaded iTunes 10, but the issue still popped up.
This hasn't pop up today after I installed 10, but back when I was using iTunes 9 the following error came up on my computer: "Windows Service Manager 32-bit Has Stopped Working." Now, no error messages pop up, even though the problem persists.
I've tried suggestions in this post as well as in this post. Also, with the fix being recommended in those threads to change the code in Notepad by clicking "edit" under the System tab under My Computer? There's one problem - there is no edit button on my options. I've included a screen grab to prove this.
I don't know if the relative age of the discussions makes any difference - maybe a new fix has com up and i'm just not finding it? Plus, since this issue began with iTunes 9, I can't help but feel like getting rid of iTunes 10 is going to help the issue, either.
This is incredibly frustrating, not being able to add new music to my iPod, so if anyone can help me out, I would greatly appreciate it, as previously recommended ones aren't useful.
Screen grab of iPod connecting to My Computer, but not iTunes:
Screen grab of the lack of an "Edit" button in the place to edit codes as recommended in previous topics:

One again shamelessly asking for help

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

One of the folders of Robo Help Project Manager is listed twice in Windows Explorer.

Hello Everybody,
One of the folders of Robo Help Project Manager is listed twice in Windows Explorer. One has all the subfolders and topics of it and the other has all the subfolders but not the topics. How did I get into this kind of situation? Why do I have two folders? Can somebody please answer on this?
Since my RH project is attached to Visual Source Safe (VSS), the same structure is mirroring in VSS.

Hi there
After reviewing the image I see that what you might think are two of the same folder are two different folders similar in name.
One is named Advanced_Functionality. The other is named Advanced_Funtionality (note the missing C).
I'm assuming this is the folder you are referring to?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Error when calling Get-AzureBiztalkService from Windows Azure BizTalk Services Management Sample

I've downloaded and built the Windows Azure BizTalk Services Management Sample from
https://code.msdn.microsoft.com/windowsazure/Windows-Azure-BizTalk-91e1bdf3
I've imported the module into PowerShell and have run the following script successfully
$sub = '<subscription id>'
$cert = get-childitem -path cert:\CurrentUser\My\<certifcate thumbprint>
Set-AzureSubscription -SubscriptionName "Test" -SubscriptionId $sub -Certificate $cert
select-azuresubscription -SubscriptionName "Test"
replacing <subscription id> with my Azure subscription id from the portal and <certifcate thumbprint> with a thumbprint from a self signed certificate in my personal store.
am now trying the following command
get-azurebiztalkservice -resourcename "oraman8"
where "oraman8" is my BizTalk Service and getting the following
Get-AzureBizTalkServiceProperties : Error in subscription or certificate.
At line:1 char:1
+ Get-AzureBizTalkServiceProperties -ResourceName "oraman8"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Get-AzureBizTalkServiceProperties], Exception
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Management.BizTalkService.GetAzureBizTalkServiceProperties
thanks in advance for any help
Omar

Are you not using port 1433 for SQL? Is the telnet successful on that port?

Running a 9.2 managed server as a windows service

Is it possible to run a WebLogic 9.2 managed server as a windows service? I was able to get the AdminServer to run as a service, but not my managed server. I am not using Node Manager. Should I be? Please help...

Yes. I re-installed and this time I installed node manager and it runs as a windows service. I then was able to get my AdminServer to also run as a windows service, using a script I found in the BEA forum. I start up my managed server now through the Admin Console and it runs ok. Only problem now is that the managed server is not running as a windows service, so that if the machine re-boots I have to manually go in and re-start the managed server again. Do you know how to make the managed server start up automatically too?

XTier Service Manager Causing Delay In Windows Explorer

Similar Messages

Maybe you are looking for