Xtreme Gamer is "not Supported by the Application" Problem. He

My SoundBlaster XFi Xtreme Gamer has suddenly stopping being detected by my creative software, such as Volume Panel. The drivers are installed, and when I hover my mouse pointer over the volume panel is still shows "SB X-Fi Audo [E000]" which is the sound card, but when I doubled click to open the volume panel it says that "The current selected audio device is not supported by the application. Do you want to select another audio device now?". When I click "Yes", it doesn't show anything on list besides "Windows Default Audio". This happened out of no wheres, with no changes at all to my computer. Volume Panel was working yesterday, but when I woke up today it wasn't. I have no idea what could be causing this, or what caused it... I did update the drivers about a week ago, but it was all working fine since, until today.
I haven't installed or uninstalled anything since it was working properly.
I tried reinstalling drivers and software, and it did not fix anything. I also uninstalled everything including drivers from computer, and used my original installation CD to install everything over again. Every installed fine, but then for some reason it would not install the drivers. Windows was detecting the device, but when I went to install the hardware manually, it would ask for CD to find some files to install... it said this twice, I located the files it needed, and each time it would complete the process it would instantly reboot computer without notice. When the computer was booted up, it would ask then ask again for the Creative CD to install the detected hardware. So I for awhile I could not install the drivers, but for some reason out of no wheres it finally installed when I used the update installation file I downloaded from Creative.com, even though I had tried the same thing a few times, it for some reason installed drivers. But now it is all installed again, my software seems imcomplete and will still not work with the sound device. What seems to be the problem here? Only thing I can think of now is the installation for some reason became corrupted. Only way I can think of fixing it is reformatting my whole computer, but as of right now I don't feel like spending a whole day doing so.
Is there anything that you can think of to fix this problem? I have had the sound card for about a year now. As of right now, I am still using headphones in the soundcard, but it doesn't sound good at all as I can't change anything in software. I also noticed that is no longer has as much installed as it would if I used my original CD. It doesn't have an option to switch sound modes anymore. It also doesn't now have "X-Fi Soundblaster" in "Add/Remove Programs" list. All it has in Add/Remove is "Creative Audo Console".
I uninstalled everything I could and deleted left over files in the Creative directory, so I deleted the whole folder after.
Only other thing I can think of is something in the registery is messed up, and causing the sound card not to be recognized. I also have WinXP SP2.

I spent yet another hour or two trying to fix it, and nothing changed.
I put it into a different PCI slot, and made no difference.
PCI slot doesn't seem to be the problem, I am thinking it is something within the registry itself.
I also put in the CD and there was no option to remove drivers, so I just went ahead and tried overwriting them, but that actually made things worse. My computer kept rebooting over and over when it hit the Windows Boot Up logo, and had to go into safe mode and do a system restore to get it back to normal.
It also keeps asking for the CD when windows loads and it detects the soundcard.
It will ask to locate acouple files, I do what it it says, but just as it is finishing installing the drivers it reboots the system.... when windows is loaded again, it will ask the same thing over, and will keep giving same results.
There isn't anything to completely remove all the creative files and folders including the 00's of registry keys. Maybe Driver Sweeper or Driver Cleaner Pro might help? ill try them, but as of now im not bothering with the soundcard.... ill just reformat. I just hope it ain't the card itself, because I am a month over the one year warranty, and the azzholes from creative said there was nothing they can do about it.
That alone made me want to turn to a different brand next time with better support. Creative has some of the worst support I know of.
They tend to leave people hanging with their defecti've hardware. What I don't get is, that the card still installs the drivers at times, and it will still work but the software won't.
I have been using it this whole time, but seems to freeze up my Guildwars alot.
It still sounds good, way better than Onboard, just not as good as before because there were no options for change mode, or couldn't access the equalizer.
Anyone know of any programs that will completely remove everything for the Xtreme Gamer Creative Software? Including everything in registry.
Also, is it possible that there might be a Windows Service that might have an effect on the problem? I tried enabling a few things, then try rebootin and reinstalling, but didn't seem to help.
But then again, I am not sure which services would cause the problem.
Definately something happened with the last Creative Driver update, only took a week afterwards for something to go wrong.

Similar Messages

  • FF4 will not open after download... "you can't open the application "firfox" because it is not supported on this application." If 4 doesn't work on OS 10.5.8, then how do I get the old firfox back?

    I downloaded the FF4 update and it has the "no smoking" symbol over the FF icon. When you attempt to open the app it states: "you can't open the application "firfox" because it is not supported on this application."
    I have OS 10.5.8
    If it will not work, how do I get the old version of FF back?

    Are you sure you downloaded the .dmg file? It should have automounted for you and opened in finder. Then all you have to do is drag the FF4 icon over the Applications link in that finder window and it will install.
    I seem to recall seeing the error you noted when I accidentally clicked a windows .exe file on my Mac.
    Also, if you visit firefox.com from your Mac, it should be prompting you to download the .dmg anyway. The only way you could get the .exe would be to click the "other operating systems" link below the main download button.

  • "You can't open the application "Flash" because it is not support on the architecture"

    Looking for some help with this.
    I recently had a system corruption on the MAC machine here in my office.
    The user was suppose to save his work to the servers which they didn't.
    The users that was using the Mac ended up losing all there data as the hard drive failed.
    As a precaution I decided when I was rebuilding the MAC to replace the dead 250MB hard drive with 2x1TB hard drives.
    I would then create a RAID1 (Mirror) with the two hard drive so if a single drive fails the users can continue to work without interruptions or losing any work.
    Mac installation went without an issues. Then the Adobe installation appears to go okay, however as I was double-checking the installs for the Flash and Indesign programs were grayed out wiht that no smoking sign symbol on them. When attempting to run the programs all I recieved was the following Error:
    "You can't open the application "Adobe InDesign CS4" because it is not support on the architecture"
    or
    "You can't open the application "Flash" because it is not support on the architecture"
    All other programs for the CS4 open and run without any issues.  The CDs I have are for a multi-user license.
    System spec are:
    Model Name:                             Mac Pro
      Model Identifier:                      MacPro3,1
      Processor Name:                      Quad-Core Intel Xeon
      Processor Speed:                      2.8 GHz
      Number Of Processors:            2
      Total Number Of Cores:          8
      L2 Cache (per processor):        12 MB
      Memory:                                  8 GB
      Bus Speed:                               1.6 GHz
      Boot ROM Version:                 MP31.006C.B05
      SMC Version:                          1.25f4
    Does anyone have a solution?

    The usual reason for that error is that the application isn't installed. As for why they didn't install, that I can't tell you.
    Bob

  • My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

    My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

    thanks for your response roaminggnome. I changed my password immediately after it happened and I have contacted i tunes to let them know of this dillemma.
    The I-tunes credit was a promotional thing by Apple to buy their laptop. So I didn't pay for the i-tunes credit in the first place. Do you think my bank will be able to reinburse Itunes credit then? I will ask support when they get back to me.

  • The attached iPod model is not supported by this application

    I just bought a 20G color iPod. I spoke w/ the Apple tech support & I needed service pack 2. I downloaded it. I didn't have a USB 2.0 port then I installed one. I downloaded the latest Apple updater software 2005-06-26 then I tried the even later version 2005-09-06. When I go into updater, it says it is "initializing" and then says "the attached iPod model is not supported by this application." Reformat and restore are both grayed out. iPod doesn't show up in iTunes and doesn't transfer my library. I just got back from the Apple Store and the suppossed "genius" said the iPod is fine and it is my computer. WHAT is wrong with my computer?

    Brad,
    you ought a little bit more descriptive! What Version of iTunes are you using? Check the software version of your iPod (if it even has one yet) under Settings-About. Your iTunes and iPod software have to be compatible. If you're running 4.9 you need 2005-06-26. Close iTunes and leave it alone. Deinstall all iPod related software, clean the registry if you want (I don't think this is so much necessary for the iPod software). Then install 2005-06-26 again on your computer first!! Don't connect the iPod. After having installed it, open the Updater, then connect. Before you do that and since you don't have any music on the iPod reset it to factory settings under Settings-Reset all settings. Or at least reset it with pushing Menue and the center knob at once. Many possibilities I know, but either one will work...after that it will remain seen by iTunes and you're a lucky guy (hopefully).
    Best regards
    Roman

  • Error Message: "The formula syntax is not supported by the report"

    We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
    I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
    doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
    But when I tried to Add FormulaField, it succeeds
    Please help me in knowing how to add SQlExpressionFields to ReportDocument.
    Regards,
    -atul

    Thanx Don & Ludek for the reply.
    CR provides support for addition/modification of SQLExpressions.
    CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
    CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
    innerReport .SQLExpressionFields.Add(name, strSQLExpression)
    CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
    Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
    Thanx
    -atul
    Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

  • Hi I  newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data

    Hi I  newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
    Please help me out

    Hi Rajesh778484,
    Welcome to the Apple Support Communities!
    I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset. 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Best regards,
    Joe

  • Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

    Problem viewing forms.This form is not supported with the current version of Adobe Reader.
    Upgrade to the latest version for full support.
    What exactly do I need to do?

    That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
    BTW PLEASE complete your profile. It's very difficult to help  someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

  • ImageReady CS2 error: Could not fully open the application. Personalization information is invalid.

    Hello,
    I am posting because Adobe is not offering tech support for CS2 and I cannot find this error for CS2 software, only CS.
    I have been using CS2 for some time on the same machine (specs below, let me know if you need additional), and have had no problems. All of a sudden, I am getting the error: "Could not fully open the application. Personalization information is invalid." when opening ImageReady. Either jumping from Photoshop or opening from Applications.
    I cannot reinstall, as I lost discs in a move, but it is valid software with valid serials, and registered, but no phone tech support! I would appreciate any help/advice/solutions greatly! Thanks.
    Photoshop/ImageReady 9.0.2
    Mac OSX 10.4.11
    1.47 GHz PowerPC G4
    1.25 GB SDRAM
    Available Disc space: 24.91 GB
    GeForce FX 5200

    Neil and Ann,
    I tried calling customer service today looking for a tech support number and was told that tech support is no longer offered for CS2! She told me to go to the forums at Adobe.com, which is how I ended up here.
    My discs were lost in a move away from a roommate (along with some other things!), so there is no recovering them. I'll call it the cost of my sanity.
    I have an old version of Director, but it gets so involved. It would have been so easy to flip my simple graphics straight from Photoshop to ImageReady. Looks like I will have to though.
    Thanks for the time and attention to my problem. I guess I should be thankful that I only lost ImageReady, which I use once in a blue moon anyway.
    Best regards.

  • Have loaded lion and now cant access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please

    Have loaded lion and now can't access office for mac or apple works as it says it does not support power pc applications, how can I acces them or better still reinstate them please?

    MS-Office for Mac versions 2004 and older do not run in Lion since these are PPC-apps for which Apple has dropped support.
    Free alternatives to open Word and Excel files:
    NeoOffice http://www.neooffice.org/neojava/en/index.php
    OpenOffice http://www.openoffice.org/
    Or get the 2011 MS-Office

  • Getting this error when saving: Names longer than 31 characters are not supported on the destination volume

    I've just tried to save a document in Pages and got this error
    Names longer than 31 characters are not supported on the destination volume
    Never had a problem like this before. I haven't changed disks or formatted disks. Running latest Yosemite 10.10
    The only reference I can find to this error on the internet says that it's for applications prior to OS X which I think we can discount.
    The only other reference I can find in the support community relates to one person with problems saving attachments in Mail and dates from early 2014.
    Can anybody give me a suggestion on what I might need to do?
    Thanks

    What format are you saving to?
    Where are you saving the files to and what is that volume formatted as?
    Have you tested with files from other applications, such as TextEdit?
    Peter

  • Windows 7 Upgrade Advisor says X-Fi Xtreme Gamer Pro not compatible

    CWindows 7 Upgrade Advisor says X-Fi Xtreme Gamer Pro not compatible? Just ran the Windows 7 Upgrade Advisor and it says my X-Fi Xtreme Gamer Pro is not compatible with Windows 7. Windows 7 is to be released in a couple of months, I would think between Creative and Microsoft, Windows 7 Upgrade Advisor would be accurate by now. It's one thing to say there might be a problem or to get updated drivers, but to say it's just plain not compatible sounds pretty final.
    I really expected to see a forum thread on this cause I'm sure I'm not the first one to run the Advisor and see this message. Came here to a Creative Forum for some information/clarification on this and there is nothing! Kind of mindblowing actually considering all the people who must have X-Fi's. From coming here, one would think I'm the only one who owns an X-Fi and is planning on going to Windows 7 (hell, maybe I am).
    So now I have Windows 7 (Professional) pre-ordered (going to use 64 bit BTW) and am now tripping if my X-Fi is going to work or if I just just remove it before I install Windows 7 and use my onboard sound, or get a different sound card entirely.
    Dazed and confused and really wanting to know what the hell is going on with Creative.

    G After the experience of the Windows 7 Advisor saying the X-Fi sound card is not compatible with Windows 7, I don't have much faith in it now. If it could get it so wrong with the X-Fi, I now wonder how many other mistakes it is making. It's still quite hard for me to believe with the communication one would think would be going on between Creative and Microsoft, that the Advisor would not be more accurate than this. As I said before, the Advisor didn't say there might be a problem or that there could be a solution, it matter of factly said it just plain wouldn't work with Windows 7. The user is sitting there reading?the finality of that?information from Microsoft, with the conclusion of just tossing the card (cause Microsoft says it ain't gonna work) and then trying to figure out what is?going to?be their sound solution for Windows 7. I'm planning on going to Windows 7 Professional 64 bit at some point and it's really important to me to know what components/programs in my current system are not going to work. Now I have no more confidence in knowing this anymore than?I did before I ran the Advisor. Looks like it's going to be around a couple of months before Windows 7 releases. Hopefully the Advisor gets more accurate before then. I'm not really too happy with Microsoft or Creative about this. Just seems pretty sloppy to me.Message Edited by mikeopam on 07-26-2009 09:56 PM

  • How do I upgrade my browser?  It is apparently outdated and not supported by many applications.

    How do I upgrade my browser for MacBook Pro, Safari 5?  It is apparently outdated and not supported by many applications.

    You need to either upgrade the computer’s OS(this isn't possible on a Core Duo Mac) or switch browsers.
    (117225)

  • Firefox 4 won't open because it says it is not supported by the current architecture. Now I cannot use Firefox at all.

    I followed the advice and instructions to download Firefox 4 and once I moved it to the applications folder, a slash went through the icon and now it tells me that I cannot open Firefox because it is not supported by the architecture. Don't know what to do next.

    I suspect you need more expert help but here are a few things you can try.
    If you can't open Firefox(double click on Firefox desktop icon) try Safe Mode - Hold down the Shift Key as you double click on the icon>don't check anything on the page that opens>continue. If Firefox opens and works in this safe mode go to Add-ons> Extensions and look for "Ask". Then look at Add-ons >Plug-ins and again look for "Ask" . Remove, delete,disable any Asks. If you do remove any, close Firefox. And try again in Normal Mode.
    The Ask website has detailed instructions for removal but you need to find it on your computer and have your computer in working order.
    If there is no sign of Ask and Firefox is working well in Safe Mode you should work your way through this -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Eventually you might need to grapple with About:Config and even your Windows Registry but I would recommend a complete uninstall and re-install before that. Unfortunately that often doesn't work.
    That all sounds very daunting but taken step-by-step you might get lucky early.

  • Canon HV30 Returns Video Format provided by capture device is not supported by this application

    I am trying to stream our church services using Flash Media Live Encoder 3 using firewire and a Canon HV30 Camera.
    I am not understanding how to use my firewire based high def Canon HV30 Camera as the video source device for FLME 3 ? When I hook everything up I get the error "Video Format provided by capture device is not supported by this application". The spec sheet says the HV10 should work.
    Is there a work around for this problem.
    In Him,
    JMb <><

    The error is coming because the camera might be giving HDV format, which is mpeg-2 encoded. FMLE needs raw format to work with. Please configure the camera to give DV out to work with FMLE.

Maybe you are looking for

  • I would like to create a colour swatch in Adobe Muse

    I have just started a trial of all the Adobe CC programs, and was just wondering about creating a colour swatch using the Muse application. Could someone give me some help and guidance on how to do this? Thank you.

  • Vendor - 1099 Misc.

    Hi, Can someone please walk me through how to config / set up and print 1099 MISC forms for vendors. Thanks

  • MIgration of Progress Open Edge ver. 9.1 to Oracle 10g rel. 3

    I'm planning for a DB migration project. The application is MFG Pro EB2 and the database is Progress Open Edge 9.1. Can anyone help me confirm the version compatibility of Progress 9.1 with Oracle 10g, so far i've only i've only confirmed ver. 7. Nee

  • Template Designer - Custom Partner Functions in Object GDCOIC

    Hi, After spending a lot of time juggling with Template designer we have finally managed to get it working. But we have now come to an issue where the object used to create web service for template designer GDCOIC doesn't have details of partner func

  • Character Input

    Hello Everyone If someone is able to assist me that would be great, my problem is that i am trying to get my code to produce the reverse string only if the letter 'B' is input but i have been fiddling around and cant get it to compile for me. Is ther