XtremeGamer Flexi-Jack Microphone Not Working: SOLUT

Hey Gents,?Several threads have people with basically this problem:?- Cant get the microphone to work or be detected in the flexi-jack- Choose input type greyed out- Microphone works elsewhere?I have a brand new Xtreme Gamer card and Turtle Beach 5. earphones with mic and got them working after having this problem. Basically, in a nutshell, the front panel plug is detected as a microphone which disables the flexi-jack to be used for a microphone. Even if you have no devices plugged in the front panel, just the extra cord and circuit makes your sound card "think" the mic is there (using the plug on the corner of the card inside the case). To use the microphone in the flexi-jack, you must unplug the front panel from the sound card. (Turn off computer, open the case, pull the plug out, tie it back or tuck it back somewhere.)? Then the flexi-jack will work with the mic and you can go on to do various other settings. Before starting this, try your microphone in your front panel. If it works there but not in the flexi jack where you want it to* then this may help you. I, being an enthusiastic new owner of an XtremeGamer card plugged all the stuff in and cleaned the case and all that even though I didn't plan on using the front panel. * All the plugs for my earphones and mic come off one cable, and the front panel on my case does not have the 5. so I needed the back flexi-jack to work. I hope this helps you guys figure out how to get your cards working the way you need. And I hope to shoot you with my Engineer Jackhammer Shotgun in BF2.

Try switching the card to another PCI slot. There was some sort of IRQ conflict that was causing mine not to work. Switched slots and it worked perfectly.

Similar Messages

  • The second Earphone jack will not work. My DV6000 is only one month old.

    The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
    This question was solved.
    View Solution.

    HI,
    Robert96 wrote:
    The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
    One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
    So..a recap. There is only one earphone jack
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Internal Microphone not working for L505D-S5983 (PLEASE HELP!)

    Hi,
    I can't seem to get my internal microphone to work. I have enabled it under Sound->Manage Audio Devices
    ->Recording tab. However the green vertical bar does not detect any voice. After setting the Microphone boost to +40dB, it detected some noise (since it has some green light) but I realized it wasn't detecting my voice. Since this did not work, I re-set the Microphone boost to only +10dB.  I only have one internal microphone and no external microphone. 
    I have seen many postings on internal microphones not working on Toshiba laptops but couldn't find a solution to mine. Can someone please help? I think it's about time that Toshiba fix this issue after the countless complaints.
    FM.

    No mentions of reinstalling the sound driver. That sometimes turns on the microphone.
    Satellite L505D-S5983
       Realtek Audio Driver for Windows 7 (32/64)
    Satellite L505-S5988
       Realtek Audio Driver for Windows 7 (32/64)
    Satellite M500-ST6421
       Realtek Audio Driver for Windows Vista (32bit/64bit)
    -Jerry

  • Front panel audio jack is not working on K9N Neo V2

    My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date.  Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
    Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

    Quote
    Thanks. Its ironic that disabling it actually enables it.
    It has to day with the front panel audio wiring of your case.  How many wires are there that can be connected to the board's pin header?
    Quote
    Sound quality isn't very good
    Can you be more descriptive?  Is the quality better if you plug the headphone into one of the jack at the back panel?  (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Microphone not working Lenovo Y 50-70

    Hello,
    I updated my windows 8.1 and after the update my built in microphone didn't work any more, in skype recording or in anything that uses the microphone. When i go to sending and tried to test it, it does nothing, like it`s on mute.
    The sound meter doesn't move at all, it worked until i updated the Windows and after the update was applied it did not work anymore. i uninstalled the sound card driver and installed it again, and it did not work the speakers work but the mic didnt work, i can not use the mic in skype or any app/program that uses the mic.
    Thanks.

    Hi Gogox1,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issues with microphone not working on your Lenovo  Y50-70 laptop.
    Please try connecting an external microphone and check for the issue, try to update the drivers from device manager.
    a) Press“Windows Logo” + “X”keys on the keyboard.
    b)Click on “Device Manager”.
    c)Search for the Sound Card from the device list and right click on it and select “Update Driver Software”.
    d)Follow the on-screen instructions and complete the installation of the latest driver.
    e) If no driver updates are available, you may also search for the updated sound card drivers in the“Drivers” and“DriverStore”folders in the location “C:/Windows/System32” by selecting the option“Browse my computer for Driver Software”.
     Click here for the driver.
    Hope this helps. Do post back if the issue persists!
    Best regards,       
    Ashwin. S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Microphone not working on iphone

    Microphone only works when on speaker phone.

    Hi,
    I had the same issue here. bottom microphone not working on my iPhone4. tested an dtried some different apps and came up with the following:
    during voice call: bottom mic not working
    during facetime: YES other side can hear me
    memorecorder: YES sound is recorded
    video: YES sound is recorded
    I've searched around the web and the apple support pages, and found some simple options to be taken to resolve the issue:
    1 clean out the 2nd (noise cancellation) microphone (which is the little pinhole right beside the earphone jack)
    2 restart the device (eliminating virtually all software / app malfunctions)
    3 reset network settings in settings menu (eliminating network issues)
    4 full factory reset on iPhone4 (make sure to back it up properly before) (why should this be the resolution if the restart didn't do it before?).
    5 open up the backside and insert a little piece of cardboard (about 160gr/m2) as per the attached video:
    http://www.youtube.com/watch?v=0jhWxYTVxe4&feature=related
    6 go to the apple store / make an appointment with the genius bar
    neither 1, 2 nor 3 resolved my issue with the bottom mic during voice calls (I still could hear the other side, they could here nothing, or some static and crackling from my side). as gathered the 4th possiblity would not to make the difference (i got convinced this was more a hardware than software issue), i jumped to option 5.
    AND IT WORKS NOW!!! yippieeeee (what would an iPHONE be if you can't call....)
    all you need is a steady hand, good eyes and a ph00 or ph000 screwdriver.

  • Speaker and audio jack is not working

    My laptop speaker and headphone jack is not working.So am not able listen anything on laptop.Please give me a solution on it.

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g series Notebook and issues with the sound. Here is a link to help troubleshoot issues with the sound. Please note remove any and all USB devices. Disconnect all non-essential devices and headphones, as these could cause some issues. Here is an automated tool for troubleshooting Windows 7. It has a built in Audio repair built into it. I hope this helps with the sound. Thanks.

  • Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

    Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
    I came home, banged the phone against the wall and it worked.
    Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

  • Internal Webcam and Microphone not working after Screen Fix

    I own a HP Envy Spectre XT Ultrabook, and last week I tried to use the webcam and the microphone for the first time in a few months.
    However I was shocked to find that Skype kept saying that the webcam was not detected. The microphone also could not register any sound.
    Device Manager did not show any imaging devices or the webcamera, even after setting it to view non-present devices.
    A check using msinfo32 did not review the webcamera either, and there were no problem devices.
    Control Panel >> Sound showed that the Internal Microphone using IDT High Definition Audio Codec was enabled and working, however it could not detect any sound. All drivers are checked to be up-to-date.
    I suspect this has something to do with the screen repair last month which a HP on-site technician came down to replace my screen, although I cannot be 100% sure. Although the screen is now working, the technician did not do a good job reassembling the screen - the bottom left corner of the screen cover has not be able to attach properly to the screen. 
    I have gone through my BIOS setup to make sure that there is no webcam disabled.
    I have tried rolling-back and reinstalling the drivers for the microphone but it did not work.
    I have tried uninstalling CyberLink YouCam (laptop preinstalled webcam software).
    Please help, these two components are very important to me as I am going overseas soon. The laptop is still under warranty.

    Hey ajun,
    Thank you very much for the information!
    For troubleshooting your Webcam, I would suggest taking a look at the document Webcam Troubleshooting (Windows 7). I would suggest the two options Video does not appear in your webcam software (such as YouCam, Skype, Messenger, ect.), and Webcam is not listed in Device Manager.
    For your internal microphone not working either, please take a look at the document Resolving Microphone and Line-in Problems (Windows 7). From this document, I would suggest following the top two symptoms.
    Please let me know the outcome of these troubleshooting steps.
    Good luck, and have a great day!
    I worked on behalf of HP

  • TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

    My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

    if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
    like this the detector just is stuck in the opposite way
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    iphone stuck in headphone mode

  • I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

    bunjamin wrote:
    There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
    Hi bunjamin,
    just go to BlackBerry World, and update all your apps including BBM.
    bunjamin wrote:
    Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
    you can turn off the magnifying glass :
    device settings >> accessibility >> magnify mode >> OFF
    you can deactivate the "reset to Hub view" :
    hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
    bunjamin wrote:
    my ringtone is much softer than it was previously
    yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
    KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • USB webcam microphone not working with Starcraft 2 voice chat

    =USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
    I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
    in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
    I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
    Any thoughts on this or am I SOL and have to find myself a shiny new headset?

    I had the same problem. You need to check the device index of your USB mic.
    In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
    Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
    Remember, that the indexing is 0 based.
    The sound framework make the assumption that the index is 0.
    Hope that helps.

Maybe you are looking for