XUnit Tests not running

Hello,
A couple of days ago my xunit tests were happily running on build in the TF Service, but suddenly not - can see exactly when.
I cannot be sure whats caused this and tried to sort it out using info from this blog post
http://blogs.msdn.com/b/visualstudioalm/archive/2012/03/27/build-on-the-team-foundation-service.aspx
but no joy.
I get a warning
"No test is available in C:\a\bin\[AssemblyName].Tests.dll. Make sure that installed test discoverers &
executors, platform & framework version settings are appropriate and try again."
What could be going wrong?
What information can I supply to help diagnose the problem?
Many thanks
Ant

Hi Ant,
I contact with Anjana that she has got your email, and sent response email to you. Please check your email box. Based on Anjana work with you via email, I temporarily close this case. I mark useful post as answer, it will be very beneficial for other
community members having the similar questions.
If anything is unclear, please free feel to let me know.
Best Regards,
Lily Wu
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

Scanner glass test not run

I love my hp 6700 and it has been working fine for approx 1 year. Today I tried as i do daily to copy a check off the glass and it comes up scanner failure. unable to scan, copy or send fax. This worked yesterday and we have had no outages or changes with computer. Can anyone help???? I ran a printer status report and only thing i see is scanner glass test not run.

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I understand that you are getting an error when trying to copy from your Officejet 6700. I can help you with that. To start, make sure the printer is plugged directly into a wall outlet and not a surge protector. Once that is done we'll do the following:While the printer is turned on remove the power cord from the back of the printer.Wait one minute.Plug the power cable back in.Try copying a blank sheet of paper from the glass.If you are still seeing the same error message please let me know and I can provide you with one more thing to try. I hope this helps and I hope you have a great evening!

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

OSB sbconsole "Test Console" service is not running

Hi all,
A problem in the osb domain sbconsole I am facing during testing of proxy/business services. When clicking on the "Launch Test Console" icon I got following error:
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
I have checked the test-console flag as true in ALSBdebug.xml file in all admin and managed servers. Still I am not able to test the service through sbconsole. All the servers are in OK state
Please help.
regards
Mohit Sharma

Cluster address should be comma-separated address of managed servers. For e.g. - If managed_server1 is listening on host:8011 and managed_server2 is listening on host:8013 then cluster address should be like host:8011,host:8013
You may refer section "Cluster Address" at below link -
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/setup.htm#i717132
Regards,
Anuj

"Itunes helper is not running" has a red light on under the Support services catergory of device connectivity test during Diagnostics check

When I ran the itunes Diagnostics Test for my new ipad, I had one test result that had a button in front of the test name, which was red.
The test was in the Device Connectivity Tests Portion, under the Support Services Category, Titled " itunes Helper is not running ".
What does this mean and how can I correct this situation, so the itunes helper is running?
Thank you vtdubu

When I ran the itunes Diagnostics Test for my new ipad, I had one test result that had a button in front of the test name, which was red.
The test was in the Device Connectivity Tests Portion, under the Support Services Category, Titled " itunes Helper is not running ".
What does this mean and how can I correct this situation, so the itunes helper is running?
Thank you vtdubu

Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'

Hi all,
Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
it would seem
some people have had relates to editing the VMX configuration file and adding the line
hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
Any help would be greatly appreciated.
Many thanks in advance.
James

The hypervisor event log message is generated only at boot - so this would be expected. Also vmbus should not be running on the host (I was looking at a VM yesterday)... This error message is generated only when the vid is determined not to be
running or cannot communicate with the hypervisor.
I have seen this due to anti-virus software in the past or due to driver verifier being configured. Since it looks like you checked driver verifier already do you have anti-virus software installed? If so have you followed the best practices
and exempted the Hyper-v services?
http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
Custom virtual machine configuration directories
Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
Custom virtual hard disk drive directories
Custom replication data directories, if you are using Hyper-V Replica
Snapshot directories
Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
-Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb

Test Stand LabView adapter 8.6 run time will not run 8.5 VIs

I’m trying to run a script I developed with a dev computer on
a regular PC set up with a Test Stand User Gui, and run times for Test Stand
and Labview.
With the Test Stand Labview adapter set to 8.6.1 all of my
ENA(Agilent Network Analyzer) calls fail for “VI Version is too early to
convert to the current LabVIEW version.” The ENA library is written in 8.5. If I set the adapter to 8.5.1 then all of the
VIs developed in 8.6 fail. In addition
it will not run any VIs that I save back to 8.5. I installed a demo Labview development
version (2010?) and everything ran fine with the adapter set to Development
System.
I am not sure what to try next to get it to run on the
regular PC, any hints.
Test Stand = 4.2
LabView = 8.6
Running in windows XP
Solved!
Go to Solution.

One of the many things I tried was saving the ENA library to 8.6, but I could not get it work.
This is the Original library I installed and was trying to Convert (8.0 upgrade agena.zip)
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=001CE83736F3674BE0440003BA7CCD...
I am about to try this one. (8.2.1 Upgrade)
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=74D1F1D4EB5268E8E04400144FB7D2...
I am pretty new to labview so I am not sure how to make the save to previous version workfor libraries, but I can easily do it with individual VIs. For libraries, it creates a new directory, and puts in all of the files and then asks me about saving the lib files as something else. This is where I think I get it wrong. I tried it again today and got the same results.
I greatly appreciate the Help
Brian

TS1363 I tried to print off some of the iTunes advice but my computer froze. I re-booted the computer and ran the diagnostic test again but now "Secure link to itunes store failed" AND " itunes helper not running."

I just tried to print off some itunes advice but my computer froze. I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to i tunes store failed" AND "i tunes helper not running" both appeared. Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen. Even though I only vaguely know what that means, I don't think that's the help I need.

I just tried to print off some itunes advice but my computer froze. I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to i tunes store failed" AND "i tunes helper not running" both appeared. Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen. Even though I only vaguely know what that means, I don't think that's the help I need.

Can not run the test form using servlet (patch 8)

Installed 9I AS 1.0.2.2.1 and forms patch 8 on Windows 2000.
Configured the Forms Listener Servlet by following the white paper "Forms 6i Patch 8: Oracle Forms Listener Servlet for Deployment of Forms on the Internet".
I can get the page titled Forms 6i Listener Servlet using URL: http://myserver/servlet/oracle.forms.servlet.ListenerServlet.
However, I can not run the test form using the servlet by the url:
http://myserver/servlet/f60servlet?config=servlet. In the formsweb.cfg file I also added a section
[servlet]
serverURL=/servlet/oracle.forms/servlet.ListenerServlet
No meaningful error message. At first it seems very slow, and then shows the "The page can not be displayed" page.
Please advise.
Thanks.

u must add "Script Alias ifcgi60 "$ORACLE_HOME/forms60/cgi" in confirguration.

[svn:bz-trunk] 13744: Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)

Revision: 13744
Revision: 13744
Author:   [email protected]
Date:     2010-01-25 01:14:09 -0800 (Mon, 25 Jan 2010)
Log Message:
Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)
QA: No
Doc: No
Checkintests: Pass
Details:
-Don't start the server before unit task, unit task already checks if the server is not running and starts the server.
-Don't stop the server after FlexUnit tests, JUnit tests need the server running, and they will stop the server after they are done.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-481
Modified Paths:
    blazeds/trunk/build.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml

Tony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

OTM launches IE when clicking "run test" not Firefox

Hi
How can I configure OTM so that when clicking on "run test" it runs the test in Firefox not IE?
I've recorded the script in openscript using firefox and the openscript browser preference is set to Firefox.
But OTM still launch IE?

Got the answer from Oracle support
Hi Clancy,
If you click 'edit this test' in OTM,
there is a field "Command line run setting :"
Here you can specify additional settings that are described in Appendix A of the OpenScript Userguide
from section A 2.2:
Setting Description
-browser.type type Specify the browser type to use for script playback
where type is one of the following (use exact case and no spaces):
■ InternetExplorer
■ Firefox
The default is InternetExplorer.
I hope this answers your question.
Regards
Marijn

TrackPad not working unless "Diagnostic Tests" app running in background

My Torch 9810 TrackPad stopped working... I had downloaded the BlackBerry 7 OS free apps including those that provide "notifications" and "text to speech" and "speech recognition" capabilities that I don't mind having to fool around with, but I don't want to use all the time... they tend to take over buttons and configuration too much, so in my efforts to remove them or at LEAST get them to stop activating every time my BB moves in my pocket I was uninstalling things. I was told I had to reboot the device, and after doing so, the trackpad would not work.
So I go back and restore my backup... and the trackpad works... briefly: all the restored apps start asking for permissions etc. and run their configuration wizards whatever and then the trackpad stopped working again.
I've tried restoring AGAIN and have even downgraded the OS to get back to a "more stable" configuration with NO third-party software installed and no luck.
At this point, the trackpad does NOT work at all in any apps. I'm sure this is a software-related problem and not that the trackpad itself is broken and needs replacement.
I've used BBSAK to try to lobotomize it back to total "factory default" but that didn't work either.
I want to rule out a hardware failure (I'm SURE this is just software related, because it happened after a reboot and there had been no problems prior to this) So today I visit the BlackBerry.com website and search for "trackpad"
I get "trackpad not working" as the first result.
"TrackPad Not Working" KB article
At the very bottom of the page is a link to the "Device Self Test Application" instructions at:
"Diagnostic Self Tests" KB Article
So as soon as I start in with the Diagnostic Self Test app, it asks "Do you want a guided setup" and shows "Yes" and "No" buttons. Instinctively I try to use the TrackPad to navigate to "No" because I just want the trackpad diagnostic, and... the trackpad works.
I exit the "Diagnostic" app and go back to my home screen and it works again... briefly...
I re-enter the diagnostic app, the trackpad works, then I long-press the Menu key to go to different apps, and the trackpad continues to work.
So, it seems like keeping the 'Diagnostic Self Test' app running in the background is 'propping up' the TrackPad so it works, but when I exit the Diagnostic app, it stops working.
Also, the back of the device seems warmer than usual, as if the CPU is being driven hard.
I'm wondering if some rogue app might be crippling the TrackPad? And the Diagnostic Self Test app is somehow pushing the rogue app aside but the rogue app is "waiting as hard as it can" and driving the CPU hard?
Yeah, I'm grasping / speculating / making stuff up, but maybe someone can decipher what I'm saying and give me some clues?
If there's a "end user totally restore the firmware to a factory configuration" that will likely resolve this issue, I'm capable enough to try it rather than be without the trackpad (or the device being repaired under warranty) for days.

Note: I decided to try exiting the Diagnostic Self Test app to see if the TrackPad would stop working... or if using a specific app made it stop working... and after doing so, then rebooting etc. the TrackPad has now been working for many hours: dare I try to reinstall some of the apps I removed?

CSCur57111 - VMWare tools not running after upgrade from 1.2 to 1.3

I guess that we need to create a TAC case to be able to run this script as root ?
regards
Gudmundur

I've upgrade from v1.2 to v1.3 (in a test-lab so far). I also found this problem of VMWare reporting the VM tools are not running, despite my changing the host type to RedHat6/x64.
Did you manage to figure out how to get ROOT access to be able to run the fix they mention?
https://tools.cisco.com/bugsearch/bug/CSCur57111/?referring_site=bugqvinvisibleredir
Thanks.

I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card

i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
Thanks

Hello,
Thanks for your reply.I will try to answer your questions.
I have checked the Device Mananger and I have seen that the device is detected by Windows XP. For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver, But could not run the DAQ diagnostic utility.The error was as i specified below.
03.05.2006 09:49:35
Results saved to: C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
Selected Device: Dev1
Device Type: DAQCard-6062E
Serial Number: 107509E
Device Support: (PASS)
NI-DAQmx Version: 8.0 (PASS)
Device Reset: (FAIL)
Error -50002 occurred at an unidentified location
Possible reason(s):
The specified device is not a valid device. The operation could not be completed as specified.
------ DIAGNOSTIC UTILITY ABORTED -----
And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
Thanks,
Serkan Buhan
Electrical-Elecronics Engineer
Researcher
TUBITAK-BILTEN

LogonUI.exe, can't see it in task manager anymore, dose it mean its not running?

after i tried to solve the issue with 26 csrss.exe running, it seemed to meany, i no longer see LogonUI.exe in task manager.
forum posts from csrss.exe topic.
Post 1
i tried process explorer & trying stuff with that i opened a new csrss.exe & that works under my user not system & i cant kill that process (i double clicked on it), after restart it goes away? or should i just pull the cable out? i mane sudden
shut down, status suspended, but it is on the list in task manager, how to get rid off it, end progress tree?
it just it did not have any info about csrss, so i tried to open it with process explorer, but that thing did not do what i though, that's why it all happened.
it also opened new Client server runtime process, i guess that csrss.exe under user is still in task manager list.
Post 2
restart solved the issue, at least it seems so, also that incident removed 24 csrss.exe from task manager, i had 26 running new i have only 2, i did it just to find out that maybe i can remove the csrss.exe what i opened after restart, but i did not expect
this result, maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
some processes disappeared, example LogonUI.exe is no longer running, i had 25 LogonUI.exe running before, with restart it booted, i hope that PC will start tomorrow to, i hope i did not mess up something & it wont start,
or i messed up PC security, made security holes.
Another forum
Post 1
u have no idea what happened, i got both Process Monitor & explorer, i messed up double clicked on csrss.exe & that opened a new csrss.exe in task manager under my user, then i tried to kill the process, but it only suspended it, then i was thinking
maybe after restart it lets me remove it totally from task manager, i made restart & what do i see when i open task manager? i see only 2 csrss.exe running, LOL sometimes messing up fixes the problem.
maybe this what some call zombie processes, they were in use once & when the process stopped they were stuck?
but all csrss.exe seemed legitimate, & no infection.
Post 2
does LogonUI.exe really run right new? is it just not showing? if its not running then i would have error message or problems with display? it would be funny if tomorrow i have all the 26 csrss.exe back.
is LogonUI.exe running & just hidden, was it normal that LogonUI.exe was shown in task manager before? or is it normal when its hidden? will it effect gaming? cant test, no games installed right new.
but csrss.exe is not the only process that has more then 2 running & some over 10, one i counted it is 25.
ok this are gone to, maybe this were connected to csrss.exe issue, but i have 10 svchost.exe, this should be normal?
some processes disappeared, example LogonUI.exe is no longer running (well it seems it is no longer running, cause its no longer shown in task manager), i had 25 LogonUI.exe running before, with restart it booted, i hope
that PC will start tomorrow to, i hope i did not mess up something & it wont start, or i messed up PC security, made security holes.
i know some of my post i copied here repeat some things i said before, i copied the post cause i was thinking that it will help people to understand my situation better :).
& i only double clicked on csrss.exe in windows system32 & created a new process, & i did end task to it & it was only suspended not killed, there was 2 win explores opened, one was cause i double clicked csrss.exe trough explorer, well u
can see the files with out it, i was unable to remove it so i made a restart, & some processes were gone after that.
i wonder did i mess up my windows & stopped some necessary progresses? despite the fact that PC is running, & seem to be running fine.
csrss.exe was running 25 times & csrss.exe was running 26 times, but there was more processes that were running more then 3 times & they are gone to.
if some processes i don't see any more are necessary i hope they at least run on background silently, is LogonUI.exe meant to run all the time like it did before? or only for few sec on log-on/start-up? so user never see it.
PC seems to run fine right new, i did that stuff yesterday.
i also have alienautopsy & PC-Doctor to what is part of alienautopsy, i mentioned it in case it matters, also when i got in windows i so some strange process for few sec in task manager, its icon looked like computer chip, cant remember the process
name, but if i remember correctly it was DLL or Intel process.
under what name is LogonUI.exe admin tools service? i could check it from there, if u think its necessary

well LogonUI.exe is listed on my task manager again, i mean its back, & about csrss, i have 3 running, i had 2 running yesterday (in task manager all 3 are running under system), with process explorer, it did not matter which of the csrss info i looked,
all is same, all are runede by same processes, i could not copy that info under environment, but what i remember is, one was a Invidia Pshysx, second & 3th was something to do with Intel, then i remember powershel, all that i remember, not worried
about csrss yet, cause its still just 3, but i wonder about LogonUI.exe, for some reason i can't add picture/screenshot here
dunno is it all normal or not, but i write it down here just in case, no problems with high memory nor cpu usage, PC seems to run normally
if its not normal i have no idea whats causing it, i guess i need to just w8 a year or so before i give my PC to shop for maintenance, cause this is beyond me i think, cause no infections found & PC seems to run & function normally, maybe its caused
by some old registry entries, i know registry cleaners are dangerous & can harm windows, so i think windows team should create their own reg cleaner free ware that finds only unnecessary reg entries that are no longer needed, a safe reg cleaner, also it
mite be software issue/bug like example Invidia maybe is creating to meany hosts or how are this things called, csrss is connected to host service as far as i know, same goes for powershell & others that use csrss.exe, or windows bug, or bug that is caused
by both, win8.1 & this drivers, well that's just a guess
maybe its a bug, system has problems with removing some closed processes from the list, or shutting town the ones that were suppose to run temporarily?
maybe i should ignore it until it starts to cause problems? i mean hit performance in a negative way
i also noticed 2 dwm.exe & winlogon.exe running
i used Ccleaner, but not for registry, i cleaned internet temporary files system temporary files event logs & memory dumbs & so on & on (its to much writing to write down all it cleans), if some of this type of files what are deleted with
that, can it cause some processes to multiply? maybe among this files is a file where its written example what processes should be running or which process is connected to which process, like the Path & stuff, so registry cleaning is not the only cleaning
that can cause issues? or is it
coincidence that after cleaning next day i see 1 extra csrss.exe &
dwm.exe & winlogon.exe? either way i don't know do i want to test it & use cleaner 5 days after today again, does windows delete this things i mentioned i cleaned with cclener automatically over time? either way, i think i won't try anything
to solve the extras issue, but if the number of this processes grows & it starts to cause problems i may just take the PC to a expert
PC seems to run & respond normally
EDIT 21/10/2014:
today there is 2 csrss.exe & the other processes are back to 1 as well & LogonUI.exe is gone again, well i did not look processes when i turned PC on, i did it after restart, maybe it accrues after boot when win opens, that some processes remain
& some are double
is it normal that when i'm not doing anything with PC it takes 19% memory after PC start until i shut down & after restart it takes 16% memory (when i use restart button in windows), does this mean start up requires more memory & processes that
remain running after start-up?

XUnit Tests not running

Similar Messages

Maybe you are looking for