Xv6800 wifi connected but pages do not load error?

we just got verizon fios wifi in our house and my xv6800 phone is connected but pages dont want to load? ive also entered the code from the router? ive used wifi before with this phone and works perfect?

As long as you are connecting to the right router (check SSID) and are inputting the encryption key okay (WEP default) it should work fine, nothing else needed. Maybe try a router reboot/reset if it's still giving a trouble.
Kevin
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

  • I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

    I can make a WiFi connection but pages will not load.  WiFi works ok on a laptop using Windows.  I have reset the WiFi settings but this makes no difference.

    Thanks, Linc, but  that almost helped:
    Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
    So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
    I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
    Any ideas about the dropped network?

  • My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Talk Talk wifi connection but safari will not load any web pages?

    I have a new Ipad and it is connected to TalkTalk wifi. But the problem is that Safari will not load a single web page?
    Are there any known issues with this problem. My PC connects to the same wifi network and is running fine.
    The build bar for the web page I try to access turns 3/4 blue but then gives an error message, 'cannot connect to server'
    TalkTalk call centre kept saying that they do not support Ipad? But would not elaborate!
    Apple call centre updated IOS 6.1.2 and reset network settings but no solution as yet.
    Do I need to take this back?
    Has anyone had a similar problem?

    How old is your MBP?
    Do you have APP?
    Does this happen all the time? Does it happen on a specific site? What internet connection do you have?

  • Connected but pages do not load

    Hi
    I am new here and I was wondering if somebody could help me with my problem. The BT people were unable to help me so I am trying here. Basically, my internet connection is good (apparently excelent) but it often happens that no pages are loading when I want to surf the net, or incredibly slowly. So slowly that loading one page can take literally 30 min.
    So I tried the following:
    - cleaning my browser cache
    - I use IE so I installed Firefox
    - reseting the hub
    - disabling webshields in antiviruses (Avast)
    - tried the cmd , resetlog.txt thing
    - changed DNS settings (BT people told me to put 4222,4221 but I also tried the google ones 8888, 8844)
    None of this helped one bit. Any other ideas? Please help as I feel for some weeks like I am paying for internet but in fact, do not have internet. My experience with people in the call centres when contacting BT was useless. They just keep repeating that my connection is good, which I know.
    Please please help, I would be grateful.
    Thank you, Lucie_P

    Hi
    Yes, I have firewalls. I tried to switch them off, which made no difference.
    This problem started like 2 months ago and since then I emailed, called BT but they have no solution. They just repeat over and over that the connection is good. They are not interested in anything else.
    Sorry, I have no other device for internet.
    I can use it sporadically, at unpredictable times. I might be lucky an hour though the day or maybe 30 min in the evening. But even then, only some pages work, like maybe google. But not, say, Youtube.
    It really drives me mad, because until two months ago, my internet was completely fine, no matter the time of day and the speed was decent. Then, from day to day, this problem.
    Best regards
    Lucie_P

  • On my iPad, wifi connected but receive "server not responding" error messages on every app including iTunes. Rebooted, reset settings (all

    Help! Was using my iPad yesterday set it down for 10 minutes and all of a sudden received "server not responding" and "Cannot verify server" error messages. Cannot open/connect to iTunes to update software. Wifi is working with strong signal. Followed other message board suggestions: forgot network and readded, renewed lease, turned wifi off/on, reset network settings, reset all settings, powered off/on, rebooted, checked router. Internet works fine on laptop. I'm so frustrated and don't know what else to do. Any suggestions?

    Hello there, Swass26.
    The following Knowledge Base article provides some great in-depth troubleshooting steps to get to the bottom of your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

    Hi
    I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
    I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
    Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
    Would you please help me out? I would really appreciate it.

    Hi..
    Restart your router then restart the iPhone to test.
    If that doesn't help, try this support article >   iOS: Troubleshooting Wi-Fi networks and connections

  • Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.

    Hi,
    I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though.  Toggling the wifi setting clears
    the issue temporarily but it occurs again.  Running iOS 8.3 now.  This was the case on iOS 8.1 and 8.2 as well. 
    I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
    My router is an EA9200 router with 2.4 Ghz and 5 Ghz.  It is configured with all bands with the same name.
    All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
    My thought is that iphone 6 cannot handle well the moving around between bands. 
    Any thoughts or suggestions would be greatly appreciated.
    Thanks,
    David

    Have you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on?  This seems to solve a lot of problems.

  • "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why?

    "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

    Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

  • I'm connected but computer will not load sites

    I have a WRT54G ver. 6 and I can't figure out what's wrong with the connection. The household has two laptops and one desktop(wired) connected to the router. My computers will say they're connected but will not load web pages. There's no data transfer. Sometimes repairing the connection will fix the problem but most the time it does not. Usually I have to disconnect the power to the router then reconnect it. That fixes it, but lately I'm having to do this several times in a day, which gets annoying. Occasionally I'll see the a box popup that says I'm connected to the internet even though I've been connected for awhile. Even my desktop that's wired to the router will stop loading pages. Does anyone know what would do that? Is my router going bad? Is there a way to run a router through some kind of self diagnostic?

    I have a Dell Inspiron 8600 w/ linksys Wireless B card and a Dell Inspiron e1505 w/ Intel Wireless Pro card. 
    When only one computer has access to the router it seems to work fine, so I'm convinced it has something to do with how the router distributes the internet connection to several computers it has trouble.

  • I show full wifi signal but pages won't load

    I recently upgraded to Lion and I'm having internet connectivity problems.
    On my new macbook it shows I have full signal to my secured personal wifi network but nothing loads up on safari. This problem wasn't present when I was using Snow Leopard.
    My computer that is hardwired to the router works perfectly with no issues. Suggestions?

    Unfortunately this doesn't work.
    My wifi signal is at full strength using my network and I can even connect to other networks at full strength.
    The internet was working yesterday but would drop off after about fifteen minutes until I restarted. Now no matter what I do, I can't even get a connection for two seconds.

  • Internet appears connected but pages fail to load after 3-5 minutes!  HELP!

    I purchased my Macbook three weeks ago and it immediately found my network and connected. A few days later my computer failed to load internet pages (both in firefox and safari). The connection would not disconnect, or seem to slow. I diagnosed and found no problems. To get it to work for small amounts of time I turn off airport and then turn it back on and get a few minutes before I get "Problem Loading Page".
    I have updated the firmware in my router. I use a D-Link Router WBR-1310 and a D-Link Cable Modem DCM-202. I have called my cable provider, Comcast, and they tested the connection saying it was strong. I connected directly to the modem and it never failed to stop loading pages the full 20 minutes I was connected.
    My computer has no problem connecting to other connections: The Library, neighbors, my parents' home. There are no time outs and it automatically connects through Airport, no problem.
    I have called D-Link about the router. They're a bit confusing in troubleshooting the problem. They told me to connect my Ethernet cable to the computer and manually put in IP address, subnet mask, router address, and name server address. First, I don't know where to find any of that except for the IP address. Secondly, do they expect me to connect and leave the ethernet cable in my computer?
    Have there been any problems with Macs and this router? What am I doing wrong and has D-Link given me good steps to take? My experience with them hasn't been so great so I'm skeptical. All of this is very upsetting, I can't enjoy my new Macbook at home.

    FrankInColorado wrote:
    Yes I had read about this. The point is, especially with something such as wireless, it has to inter-operate with everyone else out there. You would think Apple would do some testing before going to some "recommended" standard that obviously is not widely used in the real world. To someone who just bought a new MacBook, it doesn't matter that Apple is using the "new" recommended way. They just want to be able to connect everywhere they go.
    No, networking is a world of standards and recommended procedures. This all used to be a lot easier when there were actual engineers who understood the RFCs running most networks.
    You seem to think Apple just throws software over the wall. If that's true, you should swing by Cupertino some time and see if you can meet with a member of their software test groups; I'm sure they'd love to know that you think they don't do anything.
    Or perhaps Apple is supposed to test their software with every ISP on the planet first.
    And how many people posting in these forums have said when they turn Airport off and back on, then things work again for a while. If the issues are on the other side, why would that make any difference?
    Did I or anyone else here say that changing to OpenDNS' servers would solve every issue with every person in each and every one of these threads?
    But there have been many cases where switching to OpenDNS' servers does solve people's network delay issues. Hmmm, I guess Apple's cluelessness doesn't apply in those cases.
    Come on. He connected directly to the modem and was loading Web pages for 20 minutes without any problem. He goes back to using Airport and the problem reappears. And you think it's reasonable to assume it was just a coincidence that the supposed DNS issue went away while he was connected to the modem and reappeared when he went back to Airport?
    It depends now, doesn't it, as I just said.
    Perhaps he tried "surfing to a few sites" while connected directly, and when that worked he went back to AirPort. Did he try going to the same sites? Different ones? We don't know.
    In fact, even if he did visit the same sites, that wouldn't tell us anything either way as the DNS resolutions for those sites would have been cached when he was connected to the wired network.
    This is the same thing that has happened to me since upgrading to Leopard. My wireless started going bad after some minutes of accessing Web sites. If I rebooted the machine, it would be fine again for a while. I finally just turned Airport off and plugged in an Ethernet cable. I have not had any trouble with accessing Web sites since - same ISP (Comcast), same DNS servers.
    Tell me there is no Airport issue.
    I never said there weren't issues. No one did. Except you implied I did.
    Your approach to troubleshooting seems to be "Ah, Apple's software is broken, why bother."
    1) There are many people whose problems have been solved by switching to OpenDNS' servers. That's fact.
    2) There are many ISPs who have broken DNS servers. That's also fact.
    3) Comcast has a variety of DNS servers spread across the country, so your results in Colorado may differ from those of a Comcast subscriber in a different state. Fact again.
    4) You asked for reasons, I gave them, you don't like them. Obviously I must be an Apple shill. Funny, I'll have to ask why I haven't received a paycheck from Cupertino. Ever.
    I understand your frustrations if AirPort isn't working for you, but don't turn around and drop into troubleshooting threads and tell people why suggestions we're making can't possibly address their issues just because they haven't solved your particular issue.
    That would be just as silly as me assuming that because I haven't seen an AirPort drop since 2007, all of those posting in threads here are simply delusional or incompetent.
    The only way to find out what's wrong in each case is to be methodical, and step one in diagnosing network delays is to see if DNS is at fault.
    If it is, great, problem solved. If not, on to step two of a nearly infinite sequence.
    One step at a time.

  • Just been connected but pages won't load.

    Hi,
    I just had a new phone line installed last week (Friday) and have the BT Unlimited package. At the moment the signal is measuring at about 1.93 download speed. I know I am in the 10 day adjustment period but I can't even load a webpage at the moment, sometimes it is ok (still very slow) for 5-10mins and then becomes completely unworkable.
    I contacted BT Technical to see if this was normal at the beginning and after doing various tests of the line, me changing cables and filters around, using different browsers and testing the wall sockets I was told I was in the adjustment period and had to wait ten days to see if it improves as there was nothing wrong with my line. I was also told 2 is acceptable which I disagreed with because I am unable to load even google sometimes. People in the area using BT are on a speed of around 5.  
    I am unhappy to be paying for a service that at the moment I can't use, this can't be right surely I should be able to use the internet?
    Anyone have ideas what I can do, other than ring the Technical department all the time?
    Thanks
    Becky     

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    during the training period of 10 days you should remain connected 24/7 with no manual resets although your router mat reset but this is normal during training time
    in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results .
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Oracle Enterprise Manager installed but page is not loading

    hi, I have installed Oracle Enterprise Manager on a Oracle Linux 5.8 box. version being Oracle.x64.11gR2. The installation was successful and I am able to start the oms services
    via <ORACLE_INSTALL_HOME>/middleware/oms/bin ./emctl start oms. However, when I browse the location using browser
    i.e. https://localhost:7801/em the page is indefinitely waiting for response. Any particular log files or any specfic pre-requisite I am missing that could be causing this. Kindly provide your inputs.

    I don't think it's because of ageing out because:
    1. I am trying to view the plan almost at the same time that the statement is run.
    2. I am the only person running anything on the database. Shared pool is about 700M, SGA size is 2GB. PGA is 7GB.
    What else would you need to know?

  • TS2972 Home sharing is switched on in ITunes. However it is not visible on my Apple TV. Also I have my IPad set up for WiFi connection but it is not showing in ITunes

    Can anyone supply a answer to the above problem?

    I have the same problem. Turned sharing on and off in itunes and on the appletv.
    Apple - is this an issue - others have been complaining too. I am not impressed with the Appletv 3 so far!!!
    Adam

Maybe you are looking for

  • How can i add a library on an ipa file ?

    the solution from www.mocana.com  allows for maximum user flexibility and native experience, while not risking corporate intellectual property. * Increase productivity by fully supporting bring your own device (BYOD) * Embrace Bring Your Own Device (

  • Open Camera Raw Images From Sony DSC-RX100II in PE12

    No joy.  Please help.

  • Mac App Store criteria question

    In regards to the requirements for submitting an App to be considered in the app store, does that app have to be developed using Apples dev tools, or are apps developed using third-party tools/frameworks acceptable? Specifically, I have an app that I

  • Calculations in ALV Tree

    Hi folks, I've done a report with an ALV TREE (CL_GUI_ALV_TREE) and I want to get on the first node the totals of its children. I have used the method UPDATE_CALCULATIONS and FRONT_END_UPDATE, everything it's ok when displaying the values, but when I

  • Re-installing OSX Lion on a new hard drive

    I'm thinking about replacing my 320 GB hard drive. I just bought my mac a couple of weeks ago. I noticed that Apple recently upgraded their line of macbook pro computers. Since I want to replace my hard drive with a new one. I was wondering if I real