'XVBAP error' while changing a delivery

Hi!
While I was one of the delievry through VL02n I got this error. I am not sure what this error means or where to look to rectify this. Is this happening due to some other program related or is it some error in this transcation itself. I dont know but if someone can please help out would be great.
Thanks
Error:
" An error occured when sytem was reading table XVBAP with key 0100050961731001080"
Thanks

The message number it gives is "O5828", but I cannot find anything related to that in the program.
In the message it mentions error while redaing XVBAP with KEY 0100050961731001080. From this number I can see that 0050961731 represents the sales doc number and maybe the first part 010 is the client number and the last 001080 may be the item number.When I look into the sales doc , I dont find the line item 001080 or anything even close to that . Can that be a possibility that since that line item dosent exist itself it popped out the message saying that its and error ( it dose not exists itself)?
Thanks

Similar Messages

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

Budget Exceeded error while changing in Account Assignment

Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JK

I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth

Automatic Picking giving error while saving the Delivery

Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.

Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Error while creating inbound delivery

Hi All,
I get an error while creating inbound delivery from ASN
"Error during conversion of unit of measure: UoM is missing -> ST BOR131
Please help solve this issue.
Thanks in advance
Regards,
Thiru

hi,
please maintain the uom for tour material.
or
reffer this link
Alternate Unit of Measure Conversion Rule Error
/thread/2000551 [original link is broken]
Thanking you.

Error while doing Rapid delivery confirmation

Hi,
i am encountering the following error while doing rapid delivery confirmation, "set checkbox for rapid confirmation", pls guide me where to set this check box and wat are all the necessary settings need to be done.?
Thanks in Advance,
V.S.Sabitha

Hello ,
There is a field called 'Rapid Confirm' in transaction O4H1. You need the select this first.
Check the link for the prerequisites :
http://help.sap.com/saphelp_oil472/helpdata/en/bf/a007362b89e30ae10000009b38f839/frameset.htm
Regards ,
Jerin Ipe John .

Error while invoking bean "delivery": Waiting for response has timed out.

Hello,
I am running a process that currently catches an exception from a partnerlink. When the exception is caught I send an email and the process exits. When I submit a request from the BPEL console, I have to wait until the JTA timeout before the page returns. However, the instance completes successfully and I receive the email before the timeout happens. This is what I see in the logs. When I look at the audit and activity flow, all of the activities were timestamped prior to the exception being thrown. Has anyone seen this behavior or know what is going on. Is there a problem sending email in a catch or catchAll block?
<2009-04-19 22:33:41,859> <ERROR> <iCareTest.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
Thanks in advance
Jim

There is no issue the reason why it times out is because you don't have a reply back to the client in your catch all.
If you look at your process you will see that the defaul reply is in the main scope. When the catch all is invoked this reply is by passed, therefore no reply is sent.
PLease a reply in your catch all back to the client and it will work.
cheers
James

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

Error while changing modules

On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Error while changing between modules

Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
Julia

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Error while Changing Vendor

Dear all
I am getting the below error while changing the vendor master.
"Tax code 1 must be numerical
Message no.AR144 "

go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
Thx
Raju

Error while changing PO in SRM extended classic Version 5.0

Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
Srujank

Hello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima

Error while Changing IO group

HI Gurus
I facing problem while changing IO group using T code KOH2
some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error 'Position cursor correctly' .
Is there is any resion that IO got gray out ?
Thanks
Avadhut

Hi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar

Error while creating the delivery for STO

Hi,
While creating the delivery, an error is produced when i saw the log . It was as follows
"An Item with no delivery quantity is not permitted. Item will be deleted"
Its related to STO,. if STO contains around 100 items and error is for any single item system is not able to create the delivery for whole PO.
Please guide as its an vey urgent issue will reward with suitable points.
Regards,
Vikram

Hi
while creating delivery make that particular material's delivery quantity as 0. and do not enter any picking quantity.
that material will not be consider while making delivery.
Regards,
vijay

'XVBAP error' while changing a delivery

Similar Messages

Maybe you are looking for