XVR-500

After downloading Sun XVR-500 Graphics Accelerator Driver with Sun Download Manager, it is impossible to extract the file. The download manager shows a file conflict error. Trying to extract the zip-file with winzip, it shows a problem with extracting the install script. There is a problem between the directory Install and the script named install. So it is impossible to burn the whole cdrom with NERO.
jb

I'd like to suggest you try again, but you may need to pull it down
without using the Download Manager.
I tend to just go to Sun's A-Z index of downloads,
http://www.sun.com/download/index.jsp?tab=2
I pick my product-du-jour, and pull it from the server after logging in.
... but I'm in North America, pulling it from Sun in North America,
and I happen to have a fast cable modem connection (max 6Mbit/sec).
Anyhow, I just finished downloading the XVR-500 file in my straight-forward manner.
It unzipped just fine in my WinXP system, using an old version 6.3 of Winzip.
*** with the exception of that "install" script file ! ***
(I ignored all of the other file-overwrite messages that appeared.)
I ended up fooling the extraction process of that individual file, too.
I let everything else unzip to wherever it needed to go,
then went back for just that one solitary script file.
I extracted it to the root of the working partition in that WinBox of mine.
Then I moved the file into where it should have gone.
I can only guess that the extremely long pathnames in that zipfile may have
given MS Windows some fits as it extracted a file named `install`
into a directory that was also named `install`.
However, that's only a guess.
Windows does have problems with very long path names.
It's occurred to me that you can consider yet another alternative:
Copy your zipfile to a folder in Solaris. Unzip it there.
See the Solaris manpage for unzip, if necessary.
Install the software from there, not from optical media.
The install script doesn't care where it might be, CD or HDD.
You can always use the cdrw command line utility
to burn the folder contents to media, after the fact.

Similar Messages

Xsun, GLX not loaded

Hi -
I installed Solaris 10 on my Blade1000 with an Elite3D framebuffer, it worked fine.
I just installed an XVR-500, replacing the Elite.
After some issues to get Xsun start, I tried to run some OpenGL applications. Unfortunetaly, it seems my configuration isn't correct, as I get:
alesia>./blender
Using Python version 2.4
Xlib: extension "GLX" missing on display ":0.0".Here is my OWconfig file: http://hinyx.info/~deather/OWconfig
There's nothing in /var/dt/Xerrors about GLX.
Any clues?
Thanks,
-Thomas

Hi -
I just solved the problem by reinstalling OpenGL from the Sun's website.
Thanks,
-Thomas

Login screen crashing

After starting our solaris 10 machine, the login screen is flashing and eventually the console shows up. I have tried several suggestions from some forum posts and google searchs but none seemed to have fixed the problem.
What steps should I take to fix this problem? The server runs on sparc and has a xvr-500 video card.
It is possible someone in the past may have changed the configuration of xorg, gdm, and other things...so keep that in mind.
EDIT: After a reboot the login screen will flash several times and then freeze completely. I am stumped.
Edited by: rjbanker on Jun 18, 2009 6:09 AM

I searched the forums and found out what my problem is.
In this thread, http://discussions.apple.com/thread.jspa?messageID=2024401&#2024401
I checked the logs and it turns out its the Airport thats causing a kernel panic....How can I disable to prevent this from happening?
I copied and pasted this next part, buts its practically identical to my panic.log
panic(cpu 0 caller 0x000A8B98): Uncorrectable machine check: pc = 000000002238834C, msr = 0000000000149030, dsisr = 42000000, dar = 00000000004AF000
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095544 0x00095A5C 0x0002683C 0x000A8B98 0x000A7E28 0x000ABB00
Proceeding back via exception chain:
Exception state (sv=0x2AD96780)
PC=0x2238834C; MSR=0x00149030; DAR=0x004AF000; DSISR=0x42000000; LR=0x22388BB0; R1=0x0D6FB930; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00032BD8 0x22388BB0 0x223AA8E0 0x223A4A90 0x223C4718 0x223C5048
0x223C41FC 0x223C4098 0x002CDC6C 0x223C238C 0x223C36D0 0x002E82CC 0x0008CBE4 0x000291C0
0x000233AC 0x000ABE2C 0x00200033
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.AppleAirPort2(401.2)@0x22385000
dependency: com.apple.iokit.IONetworkingFamily(1.5.0)@0x214ff000
dependency: com.apple.iokit.IOPCIFamily(1.6)@0x1d82d000
Exception state (sv=0x2ADC1000)
PC=0x9000A778; MSR=0x0200F030; DAR=0xA0B0B558; DSISR=0x40000000; LR=0x9000A6BC; R1=0xBFFFDBC0; XCP=0x00000030 (0xC00 - System call)

Ubuntu on a Blade 2000

Hi, I've succesfully installed Ubuntu server for SPARC on my Blade 2000 with a xvr-500 graphics card but I still haven't been able to configure Xorg. The sunffb driver does not respond ("device not found" error) and I haven't found any useful information for this video card.
Has anyone had success configuring it? If so, which driver should I use?
Thanks in advance,
Lucas 'Basurero' Vieites

Hello Lucas,
you wrote (http://ubuntuforums.org/showthread.php?t=334007)
I think I'll be asking for advice on the sun forums, maybe someone over there has more luck or experience.
The majority is using Solaris on SPARC. I think you have to further investigate on the several Linux on SPARC newslist.
Michael
When will the deficencies/bugs in the Forums software be fixed ?

Compatability between winzip ands zip manager?

I hace new E70 fantastic phone, but does winzip on PC work with the supplied zip manager or is there a desktop application I can use to zip files in my PC then copy them to the handheld device? Am having a corrupt error message in hand held whentrying to open a winzip file in phone.
Also should the sheet application in the handheld device work with excell 2000 on pc as I can only get it to open in documents?
Apart from that can't edit my contract wap access points yet, do i need to unlock device, and where do i get this from?

I'd like to suggest you try again, but you may need to pull it down
without using the Download Manager.
I tend to just go to Sun's A-Z index of downloads,
http://www.sun.com/download/index.jsp?tab=2
I pick my product-du-jour, and pull it from the server after logging in.
... but I'm in North America, pulling it from Sun in North America,
and I happen to have a fast cable modem connection (max 6Mbit/sec).
Anyhow, I just finished downloading the XVR-500 file in my straight-forward manner.
It unzipped just fine in my WinXP system, using an old version 6.3 of Winzip.
*** with the exception of that "install" script file ! ***
(I ignored all of the other file-overwrite messages that appeared.)
I ended up fooling the extraction process of that individual file, too.
I let everything else unzip to wherever it needed to go,
then went back for just that one solitary script file.
I extracted it to the root of the working partition in that WinBox of mine.
Then I moved the file into where it should have gone.
I can only guess that the extremely long pathnames in that zipfile may have
given MS Windows some fits as it extracted a file named `install`
into a directory that was also named `install`.
However, that's only a guess.
Windows does have problems with very long path names.
It's occurred to me that you can consider yet another alternative:
Copy your zipfile to a folder in Solaris. Unzip it there.
See the Solaris manpage for unzip, if necessary.
Install the software from there, not from optical media.
The install script doesn't care where it might be, CD or HDD.
You can always use the cdrw command line utility
to burn the folder contents to media, after the fact.

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Fax function of HP LaserJet Enterprise 500 Color MFP M575

Hi,
I am one of users of HP LaserJet Enterprise 500 Color MFP M575.
I would like to know can I set the printer do not print my fax number and fax header on paper when I fax my document to others.
I had login as admin but I did not see where I can config it.
Thank you.
Regards,
Jimmy Pun

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

HP LaserJet Enterprise 500 color M551dn - Optional USB Device port

Hi, I'm hoping to buy the optional wireless print server (HP Jetdirect 2700w USB Wireless Print Server J8026A). There is one problem though, the optional USB device port seems to not exist on my printer. I only notice that the USB logo is present where the port is supposed to be. The plastic in the area is squared off as though it is some sort of break away tab and the port is underneath maybe.
There is no reference to this in the manual anywhere and I am really unsure how to proceed. I don't want to damage anything.
If someone experienced with this model (preferably an HP Employee) can confirm the availability of the port and tell me how to access it (Is it a break away tab?). Part of the reason why I bought this printer is the optional Wireless N print server.
Thank You in advance.

Thank You for your reply. The port you are talking about is the front panel port for walk-up usb printing and firmware upgrades. This port is indeed available on the higher end LaserJet 500 (NON-MFP, printer only edition) as I just used it to upgrade the firmware. The port I am talking about is the one on the left side in the ports section which you use to plug in the optional print server (not the computer I/O port).
This is shown in the official manual and the spec sheet so I'm 85% sure the port is there, hp can't advertise and mention something that is not available as this would be a big problem and make the 2700w print server incompatible when it clearly states that it is. I just need someone to confirm the availability and clear my confusion (either from HP, or another owner who bought the wireless print server 2700w).

HP LaserJet Enterprise 500 Color MFP M575 - Can't scan from Windows

We recently purchased and installed an HP LaserJet Enterprise 500 Color MFP M575 to be used as a networked all-in-one solution for a number of offices. I have been able to get it set up on our network and have installed the appropriate drivers on the requested Windows 7 x64 machines, and network printing works perfectly. However, it seems that despite the fancy scanning features available from the all-in-one itself (scan to email, scan to a network folder, etc.), I can't find any way to do an old-fashioned scan from Windows.
I have installed the full software solution available on the driver download page for the device, and while Windows lists the device as a "Multi Function Printer; Scanner" it does not recognize it as an actual scanner. The built-in Windows Fax and Scan simply reports that no scanners are installed. The software installation did not include the HP Solution Center (which I am used to seeing from my experience with various other HP all-in-one devices) or any equivalent for direct scanning. The driver download page for the device does not include any separate scanning drivers, so I can't be certain if they were included with the full installation or exist at all.Some of our staff also use Adobe Acrobat to scan, and even that fails to recognize the MFP as a scanner.
We'll eventually be setting up the device to scan directly to a network folder, but we need a fallback while IT takes their time getting it set up; I can't imagine that the simplest option is not available at all. I must be missing something here, any assistance would be greatly appreciated.
Edit: To add, I also ran the HP Print and Scan Doctor. Interestingly, it reports the device as a printer and only offers to "Fix Printing" without any sort of resolution for my scanning problem.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Pavilon 500-319na can I install a second hard drive

pavilon 500-319na second hard drive
Options
‎01-02-2015 09:30 AM
Operating System: Windows 8.1
I bought an HP Pavilion 500 - 319na desktop in summer and want to install a 2nd hard drive. There are spare connections on the board and the power cable to the internal hard drive has a spare connection. From what I read it needs to be SATA 3. I have read conflicting advice on this board. Some say yes, some say no.
OK, there seems to be only one bay (a poor oversight by HP) but provided I find a way of securing another drive is there any reason why it should not work.
From what I read it should be max 2Tb's.
I want a definitive answer please!
Win 8.1 64 bit.
This is the hard drive I plan to buy. The spec says XP, Vista, Win 7, but am I right in thinking it should work with win 8.1
http://www.pcworld.co.uk/gbuk/components-upgrades/internal-hard-drives/3-5-inch-hard-drives/toshiba-...
This question was solved.
View Solution.

As I said to you in the other cross posting (desktop hardware):
You can obtain 3.5" hard drive cage from here for $11 shipped. Granted it has a 120mm fan and space for 4 drives, but for the price, you can mod/cut all you want.
Now your other issue/question: You will want a SataIII 6GB/sec drive 2TB, 7200 RPM.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to 'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
Thanks for the info.

How to fix 500 error in ical?

How do I fix a 500 error in ical?

error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
Apple advice

500 Internal server error while running sqlsrv_query in PHP

Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.

Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error 500--Internal Server Error while opening a taskflow in inline popup

Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
     at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
     at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
     at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
     at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
     at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
     at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KK

Hi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK

500 internal server error while deploying a Web Dynpro application

Hi
I got the 500 internal server error while deploying the application to server.
I tried to find the log file at usr --> SAP --> SID --> JC XX --> j2EE --> Cluster --> Server 0 --> log, but no log was there.
There were structure changes in the RFC and also code change in my Web
Dynpro code.
I´m working on EP 7.
NWDS version is 7.0.1
Please help me as the production move is pending because of this.
Regards
Vineet Vikram

Hi
Restarting the server does not help in my case.
I tried it several times.
I'm getting following error message in NWA>
Originated from: com.sapmarkets.bam.logcontroller.InvalidLogQuerySessionException: Invalid or expired log query session "1"
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.closeLogQuerySession(LogControllerFacade.java:356)
at sun.reflect.NativeMethodAccessorImpl.invoke0
Can you pl help on this.
Regards
Vineet Vikram

XVR-500

Similar Messages

Maybe you are looking for