[XY Graph]Cursor legend difference between LV 7.1 and 2009

Hi all,
recently I am working on having software done in LV 7.1 renew with 2009.
And I have such problem, that with the old version on cursor legend there were options for cursor to be snapped to plot or free-run etc ( it was possible to do that in runtime) So that user could do that without any code added to handle that. Am I doing something wrong with graph settings ? or that functionality has been removed ? I attach a file with a area of my interests
Regards
PacHOOk
Regards,
PacHOOk
Solved!
Go to Solution.
Attachments:
LV7.1.jpg ‏9 KB
LV2009.JPG ‏11 KB

I think you will be interested in reading the following thread:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=458099

Similar Messages

Qucik Graph Cursor Legend Questions

Hi all,
I have a couple of quick questions regarding my graph cursor legend:
1. Is it possible to move the position of the cursor legend during runtime? I cannot seem to drag it around the graph?
2. Can I hide/remove the cursor mover? This is not needed and is for this vi as I need to be able to manually drag the cursors only.
I am accessing the cursor legend during runtime through a right-click and selecting "visable items:.
Thanks,
Jack

Hi please check Using Cursor Legend in this link if it is helpful
http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/customizing_graphs_and_charts/
Sorry i don't know exact answer for questions, But did you try property node of Cursor.
-To access it, right click the graph indicator in Black Diagram and go to create>>Property Node>>Cursor.
-Lot of options regarding cursor available there, you can make selected property to write or change the parameter. and check this for help on cursor properties
http://zone.ni.com/reference/en-XX/help/371361J-01/lvprop/cursor_p/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Difference between ECC 6.0 and earlier versions

Hi,
one of the difference between ECC 6.0 and earlier versions is that instead 'WS_UPLOAD' and 'WS_DOWNLOAD' in ECC we should use 'GUI_UPLOAD' and 'GUI_DOWNLOAD' respectively.
(of course SPDD and SPRO tcodes is known by everone i suppose)
Similarly can u all put down some differences here, atleast one entry by each, I think we can make a good docu. I have searched the net for the differences but could not get much, so by each of us contributing one each, it would become good docu..for all of us.
Thanx in advance

Unicode Errors Encountered and their Solutions
E1. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified.
     Error:
     OPEN DATASET FILE FOR OUTPUT IN TEXT MODE.
     Solution:
     OPEN DATASET FILE FOR OUTPUT IN LEGACY TEXT MODE.
E2. In Unicode, DESCRIBE DISTANCE can only be used with the IN BYTE MODE or IN
      CHARACTER MODE addition.
     Error:
     DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIEBO01 INTO BPOS.
     Solution:
DESCRIBE DISTANCE BETWEEN T_KOMK AND T_KOMK-HIENR01 INTO BPOS
IN CHARACTER MODE.
E3. u201CUSR02-UFLAGu201D must be a byte-type field (Typ X or XSTRING )
     Error:
     IF USR02-UFLAG O YULOCK.
     Solution: Since the data type of USR02-UFLAG is type INT and is compared with data type
                X u2013 Hence the error. So we define a new variable ZULOCK and assign the
                value of USR02-UFLAG to ZULOCK.
              New variable
              DATA: ZULOCK(1) TYPE X.   "APBRP00
              Assign value
                            ZULOCK = USR02-UFLAG.
        Compare -
               IF ZULOCK = YULOCK.   u201Creplace IF USR02-UFLAG O YULOCK.
E4. HT cannot be converted to a Character type field
Error :
WRITE ht TO t_data+10(2).
Solution : Since the data type of ht is a type u2018Xu2019 and the data is been transfer to
         t_data which has a data type u2018Cu2019. value of one data type cannot be copy to
         another data type where one of them is type string .Hence the error occur,
         so the data type of ht is been change to Type u2018Cu2019
     OR
           A Tab ( value 09 ) is introduced as part of the row. The value 09 is not converted in Unicode environment. Instead we need to use class
     Error:
          DATA: BEGIN OF ht,
               x(1) TYPE x VALUE '09',
          END OF ht.
     Solution:
              Define Class after the Tables definition.
                   CLASS cl_abap_char_utilities DEFINITION LOAD.
              Data Defination : Comment internal table HT and define a variable HT type C.
       *   Insert + APRIA00 05/02/2007 Unicode project
       *   DATA: BEGIN OF ht,
     *         x(1) TYPE x VALUE '09'
       *   END OF ht.
     *   Insert - APRIA00 05/02/2007 Unicode project
       DATA HT type C.
       Before using HT assign Horizontal tab.
                 Ht = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E5. In Unicode programs the u201C#u201D cannot appear in names, as it is does here in the name    u201C#LINESu201D
     Error :
     #LINES                 TYPE I,
     Solution : Since the # is used in the start of name, it is not allowed. We need to
              remove it.
     Solution for the above
     V_LINES                 TYPE I,
E6. In u201CTEXT MODEu201D the u201CENCODINGu201D addition must be specified as well as the addition was required FOR OUTPUT,FOR INPUT, FOR APPENDING OR FOR UPDATE was expected.
     Error:
     OPEN DATASET PATH_NAME IN TEXT MODE.
     Solution:
     Download =     OPEN DATASET PATH_NAME FOR OUTPUT IN LEGACY TEXT MODE.
     Upload        = OPEN DATASET AUSZUG-FILE IN TEXT MODE FOR INPUT ENCODING DEFAULT.
E7. u201CTABu201D must be a character-type data object( data type C,N, D, T or String). Field string)
     Error:
            data: begin of tab,                   "Excel Parameter Split at TAB
        t type x value '09',          "Tabulator
       end of tab.
            concatenate 'Material' 'Package Status'
                into z_download-line separated by tab.
            ( In the above command the two field are to be separated with a horizontal Tab. The earlier      way of assigning the tab value u201809u2019 will not work in Unicode environment.
     Solution:
     Define a class just after the Table defination.
          CLASS cl_abap_char_utilities DEFINITION LOAD.
            Define variable Tab as shown below :
          Data : TAB           TYPE C.
     Before the concatenate statement assign the value of Tab using pre-defined attributes.
          TAB = CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
E8. Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not Unicode-
      enabled; use the class cl_gui_frontend_services
     Error-1: Function WS_DOWNLOAD is obsolete in Unicode environment.
            call function 'WS_DOWNLOAD'
                 exporting
                      filename = zfilename
                 tables
                      data_tab = z_download.
     Solutions-1: Instead of WS_DOWNLOAD use GUI_DOWNLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    FILENAME                      = zfilename
TABLES
    DATA_TAB                      = z_download.
E9. The "/" character is reserved for identification of namespaces. It must be entered twice.
        The name of a namespace must be at least 3 characters long.
     Error :
                 U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     Solution :
     * Special character can not be used to define a data variable
     *      U/N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
              U_N(3)        TYPE C, "U/N    --> ERSETZT DURCH SPACE
     * Insert - APSUS02 07/02/2007 Unicode Project
E10. "LP_TAB" and "CS_TAB" are not mutually convertible. In Unicode programs,
         "LP_TAB" must have the same structure layout as "CS_TAB", independent of the length
         of a Unicode character.
     Error : This error is encountered when data from one internal table is copied to another
                         internal table which different structure. In this case its LP_TAB & CS_TAB.
                 LP_TAB[] = CS_TAB[].
     Solution :
          * Replace + APSUS02 07/02/2007 Unicode Project
*   LP_TAB[] = CS_TAB[].
              move-corresponding CS_TAB to LP_TAB.
          * Replace + APSUS02 07/02/2007 Unicode Project
E11. Could not specify the access range automatically. This means that you need a RANGE
          addition.
     Error : Range need to be specified as an addition to the command.
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1).
           Solution :
            DO 4 TIMES VARYING HELP_CHAR FROM ABCD(1) NEXT ABCD+1(1)
          * Insert + APSUS02 07/02/2007 Unicode Project.
                                                      RANGE ABCD+0(4).
* Insert - APSUS02 07/02/2007 Unicode Project.
E12 . Processing Terminated Error code: Error in opening /
                                          Path not found when downloading to Unix directory.
     Error : PARAMETER: outfile(92) DEFAULT
              '/CP/interface/NPP/data/MX/cbslaprcpts'
                    LOWER CASE,
               kmxmstrd AS CHECKBOX.
            This error is encountered when the path is missing. The above path is related to CCP.
     Solution: For testing purpose comment the original path and replace it with
                                 /CP/interface/CCD/Unicode_test/
E13.    Upload/Ws_Upload and Download/Ws_Download are obsolete, since they are not                                                                       Unicode- enabled; use the class cl_gui_frontend_services
     Error: Function WS_UPLOAD is obsolete in Unicode environment. (During UCCHECK)
               Call function 'WS_UPLOAD'
       Exporting
            Filename                = zfilename
            Filetype                = u2018DATu2019
       Tables
            data_tab                = z_upload
       Exceptions
            Conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_table_width     = 4
            invalid_type            = 5
            no_batch                = 6
            unknown_error           = 7
            gui_refuse_filetransfer = 8
            others                  = 9.
     Solution: Instead of WS_UPLOAD use TEXT_CONVERT_XLS_TO_SAP. Do not use temporary file put the file name as it is.
1) First define a type pool and a variable of type truxs_t_text_data.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
     2) Use this it_raw in the function module in parameter i_tab_raw_data. Put file name and the internal table in the function module.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
*     I_FIELD_SEPERATOR        =
*      i_line_header            = ' '
      i_tab_raw_data           = it_raw       " WORK TABLE
      i_filename               = zfilename
    TABLES
      i_tab_converted_data     = z_upload[]    "ACTUAL DATA
   EXCEPTIONS
      conversion_failed        = 1
      OTHERS                   = 2.
     Comment u201Ci_line headeru201D. It takes the first/ header line of the file which is to be uploaded.
Put square brackets after internal table as shown above.
E14.    CURSORHOLD may not be converted into a number.
     Error: GET CURSOR LINE CURSORHOLD VALUE CURSOR_HOLD.
     Solution: In the declaration part of CURSORHOLD, one field is of u2018Pu2019 type and one field is of u2018Iu2019 type, which is not allowed in Unicode environment.So change the the type of it to NUMC.

Difference between Business Objects Explorer and Polestar

Hi all,
can anyone help me out with the main differences between Business Objects Explorer and Polestar.
thanks & regards
immanuel.

Explorer is the new product name for Polestar. There have been a few versions of Explorer released since it was called Polestar, but you can find the latest 'whats new' doc here which lists the latest additions:
http://help.sap.com/businessobject/product_guides/boexplXI32/en/exp32_whats-new_en.pdf
For one, Explorer now comes in two editions... Standard and Accelerated. The Explorer Standard edition allows reporting off of Universes, just as the original Polestar product did. Explorer Accelerated allows reporting off of SAP BWA indexes as well as Business Objects universes. Both versions now allow uploading of excel files to report off of. You can export an Information Space to a Webi doc or Excel file. Users can now save favorite links to an Information Space. Sorting has been improved as well as graphing functions and overall display. You'll have to install the latest build of Explorer - "Explorer 3.2 SP1" and compare. I don't know of a document or matrix that compares Polestar to Explorer. The two are basically the same product with a number of enhancements added to the Explorer line.

Difference between execute as statement and execute as script in Toad

Hi
I want to know difference between execute as statement and execute as script in Toad ..while i am running a query execute as statement is taking about 3 seconds and if i run with execute as a script its taking long time..Which one i need to consider.

user632733 wrote:
I want to know difference between execute as statement and execute as script in Toad ..while i am running a query execute as statement is taking about 3 seconds and if i run with execute as a script its taking long time..Which one i need to consider.Firstly, this is not a TOAD forum. TOAD is a 3rd party tool developed by Quest Software, so really your question does not belong here.
However...
When you execute a query as a statement then toad itself opens the cursor against the database and issues the statement, fetching the rows as they are needed to display in it's interface. You say it takes only about 3 second to run, but the chances are that you haven't scrolled the result window down to the last record, for which I'm sure you'd find it takes a little longer.
When you execute a query as a script, TOAD passes the query out to be run in SQL*Plus rather than from within TOAD itself. With SQL*Plus, it runs the whole statement fetching all the rows before returning control, the same as if you had scrolled to the end of the result set in TOAD.
In reality there should be no difference in the time it takes to execute the statements to completion in either environment.

What is the difference between Macs Voice Over and the text to talk feature

what is the difference between Macs Voice Over and the text to talk feature

Voice Over doesn't need someone to type in the text first. Voice Over works with specific screen displayed information so that a blind person can know where his/her cursor is or what is being displayed. Although it is an application of text to talk it's more than the text to talk feature.

Difference between Avg. Performance and Avg. Server Time

When you go to the Create Reports in the Graph 1 tab, if you have Show All checked a lot of different statistics are shown per script. I don't really know the meaning for most of the items in the list. For this thread,
Do you know what is the difference between Avg. Performance and Avg. Server Time?

Avg Performance includes think time, server time does not. (As we understand it)

The difference between VGA, DVI-D and ADC?

Hi.
The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
Thank you for your input.
Walter

Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
 Cheers, Tom

The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

Hi,
Anyone know what is the difference between AIR-ANT5135D-R and AIR-ANT5135DB-R ?
From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference Guide"
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Inside the document there is only AIR-ANT5135D-R.
likewise for the 2.4 GHz, AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference Guide"
Any help would be appreciated
Thanks,
Richard

Found the difference, AIR-ANT5135DB-R and AIR-ANT2422DB-R are non-articulating antennas.
Thanks!
Richard

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

What's the difference between a web site and a web application?

I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
Or maybe I'm totally wrong here - what differenciates between a web application and a website?
http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
runs remotely, and it depends fundamentally on a processing and a data storage backend.
http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
There is no real "difference". Web site is a more anachronistic term that exists from the early days of
the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
more like an application as a web app.
The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

Difference between cancel_flag IS NULL and cancel_flag ='N'

Hi ,
Please clarify Difference between cancel_flag IS NULL and cancel_flag ='N' in PO Headers .
Because from front end cancel check box is unchecked in abobe both the cases . We can see cancel check box status only in Help>Diagnostics>Examine .
Thanks in Advance
Kiran

Hi Kiran,
The is no difference between cancel_flag with 'null' and 'N' but cancel field contain Null if it is generated through auto create and it contains 'N' if Purchase order raised without PR .
I hope you understand.
Regards,
Sravani.M
Edited by: 855855 on Nov 9, 2012 5:49 AM

What is the difference between string != null and null !=string ?

Hi,
what is the difference between string != null and null != string ?
which is the best option ?
Thanks
user8729783

Like you've presented it, nothing. There is no difference and neither is the "better option".

[XY Graph]Cursor legend difference between LV 7.1 and 2009

Similar Messages

Maybe you are looking for