Xy-graph timestamp issue

Hi All,
I'm sure it's simple but I can't figure out what is going wrong with my xy-graph. I read a timestamp as a string from a waveform data file and convert it to a timestamp format. I then plot data vs time.
The timestamps look correct but the plot is all out of whack. I've attached a simple example. Can anyone help me and see what I'm doing wrong?
Thanks!
Solved!
Go to Solution.
Attachments:
XY-example.vi ‏19 KB

The data was taken on two consecutive days.I set the graph to be the same format but didn't work.
Solution - make the timestamp creator to be dd/mm/yy. For some reason I thought it needed to be mm/dd/yy?
Cheers!

Similar Messages

IGS Pie Graph - colors issue

Hello all,
I'm displaying an IGS Pie graph in a Web-Dynpro application.
Since in a pie graph the different parts of the pie are of the same series in different elements,
I couldn't find a way to set different colors to them using the chart designer.
When choosing a specific color, all the parts appear in the same color.
When choosing an automatic color, they appear in different color,
but then I don't have control over the color.
Is there a way to define the pie so that every part is of a different series?
Otherwise, Is there a way (by using the chart designer or by code)
To achieve an IGS pie graph with the colors of my choice?
Thanks ahead for any help,
Anuj

Hi
Use this [thread|IGS Pie Graph - colors issue; for IGS Pie Graph - colors issue problem.
Best Regards
Satish Kumar

SCORM timestamp issue

Hi there,
I've been having issues with multiple quiz attempts and interactions not all being sent to the LMS. Most answers are sent though randomily LMS drops couple of answers on each re-attempt of the quiz yet each question is set to report the answer. It also doesnt appear to occur on first attempt only new attempts after first failed. LMS provider says this is a timestamp issue in the course which doesnt send it incorrect SCORM format therefore it rejects it when the same interaction id is already there from previous attempt failed. Below is the error from LMS. Please anyone advise how this might be corrected inside Captivate.
[11:05:25.897] SetValue('cmi.interactions.29.timestamp', '2013-09-13T11:05:25.0+00:60') returned 'false' in 0.001 seconds
[11:05:25.898] GetLastError() returned '406' in 0 seconds
[11:05:25.899] GetErrorString('406') returned 'Data Model Element Type Mismatch' in 0 seconds
[11:05:25.900] GetDiagnostic('') returned 'The cmi.interactions.29.timestamp value of '2013-09-13T11:05:25.0+00:60' is not a valid time type.' in 0 seconds

Im using captivate 6

Xy graph cursor issue

Hi,
I am having a weird issue with cursors on XY Graph. I am unable to grab the cursor and even when I manually put the X value in the cursor legend, the cursor sometime go to go to that X value. And the issue is very intermittent. The cursors work sometimes without any issue and sometimes I just cant grab and move them.
I have attached the vi here that I am having an issue with. Could anyone take a look at it and let me know if you are also having the same issue as me. See if you are able to move the cursors, snap cursor to different plots and still able to move the cursors.
Thanks,
LVCoder
Solved!
Go to Solution.
Attachments:
XYGraphCursorIssue.vi ‏50 KB

It looks like you're trying to make the third cursor on the list show the delta between the second and the first, right? i.e. Delta = Cursor1 - Cursor0
If this is what you want, change the ActCrsr index value on the second property node to a value of "2". It is currently "1".
This will set the Delta cursor to the be difference values that are calculated.
What's happening right now is you're subtracting Cursor0 from Cursor1 and then assigning that difference back to Cursor1. If this is done a few times in a row, you end up just dropping Cursor1 to (0,0).
James
LabVIEW Professional 2014

HTC One M8 call history timestamp issue

I have waited patiently for several months through a couple firmware updates, expecting to see this issue addressed. However, it seems to have received very little attention or recognition.
Using the stock phone app, any calls prior to the current day do not display the timestamp. Only calls made or received during the current day display the time of the call. Any calls received/made prior to the current day only display the date. Any calls placed yesterday only display simply "yesterday." Long-pressing any entries without a timestamp to select "view history" only displays the call "duration."
A few friends have the same phone on another carrier and their devices display the name, phone number, date and timestamp in the "Call History" and "Phone" logs, even without the need to long press and "View History." They are also using the same stock Phone application. It is quite frustrating to not see the timestamps of missed calls.
The few references online regarding this issue seem to have concluded this is a carrier programming issue, as those on Verizon have the same issue and those on another carrier do not.
Does anyone using a Verizon HTC One M8 not have this issue using the stock Phone app?
Does anyone know of a fix or workaround to address this without installing 3rd-party apps?
Is Verizon planning to address this issue? Have they already?
Whom shall I contact to raise this issue?
Thanks in advance.

Hi Pamela,
Here's how things look.
I can't remember it being any other way on my handset.
Would appreciate anyone kindly confirming (or denying) this is how entries look on their Verizon HTC M8.
(Censored for Privacy)
Call History:
Phone History:
Long-Press entry > View Call History:

3D Graphs: various issues

I had some issues when I first tried to use LV 5.1's 3D Graph. The NI
applications engineer who helped me was great. Just wanted to share some
tips:
1: In LV 5.1 but not in LV 6: if the user reinitializes to default, the
3D Graph stops working!
NI: "that's because the reinitialize to default incorrectly sets the
graph's refnum to 0, which is an invalid refnum."
Work-arounds:
* use LV 6.
* customize the menu to hide the reinitialize to default option.
* don't show the menus when running so the user can't accidentally
reinitialize to default.
* use a different VI which will call VI Server to programmatically
reinitialize your VI to default.
2: In LV 5.1 but not in LV 6: the graph does not appear in the
executable! Fix: search you
r system for a "ole_lv5container.dll". It
should be located in the
...\LabVIEW\RESOURCE
directory or in the \LabVIEW\shared\LabVIEW Runtime\5.1\ folder. Place a
copy of this DLL in the same directory as your executable.
3: The 3D Graph will update more quickly if you:
* Reduce the volume of data you pass to it.
* Get the best hardware you can.
* Don't do anything else to compete for the graphics / CPU.
* Change the color depth. To my surprise, the screen updated faster at
16-bit color than 256-color. I suspect that the CPU has to dither the
colors into the smaller palette, and that slows down the update.
* Changing screen resolution (1024*768, etc.) also made 50% difference.
* Right-click the graph, choose Properties, & check the "Use 3D
Acceleration" and "Fast Draw for Zoom/Pan/Rotate" options.
These are my findings, your results may vary depending on h-w & drivers.
Mark

Wonderful post Mark.
If we could only rate questions.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Graph display issues

Hello everyone,
I am currently facing a problem of graph display. After some manipulations (typically a mouse wheel scrolling), a part of the curves of my XY graph disappears (see attachment).
I’m using Windows XP and Labview 2009. I have observed the problem on computers with runtimes (no labview development system installed).
Concerned applications have already been tested and some of my colleagues also face such problems for some time. I suspect a hardware compatibility problem but I do not really know how to search and even less how to solve this issue...
Any idea?
Thank you in advance!
Attachments:
Depart.JPG ‏51 KB
Apres_mollette.JPG ‏50 KB

duplicate
Samuel G. | Application Engineer Team Leader
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

Graphs/charts issue

Hello Gurus,
1) I have a report and I just added a bar graph to present the data in the report.The issue is the numbers on the graph with that of the report don't tally meaning they don't match. Please help.
2) Another issue is for one of the graphs, I need to use 2 dimensions and 1 measure, so what is the best graph to use?
I am using oBIEE 11g.
Thanks in advance

+1) I have a report and I just added a bar graph to present the data in the report.The issue is the numbers on the graph with that of the report don't tally meaning they don't match. Please help.+
Can u elaborate this question?
Example: There is a report that has 4 dimensions and 1 measure. The value of measures read 23423,276576,90797976.,.etc..
but in the graph, the measures read 902340,458923,3489493,.etc...
The numbers don't match. Please let me know if its still unclear.
+2) Another issue is for one of the graphs, I need to use 2 dimensions and 1 measure, so what is the best graph to use?+
Vertical Default is the best one to use,It depends on your rqmt right !!!!
Thanks

ODI timestamp issue

Hi ,
We are having a source column datatype as Date(Oracle 10g).
When we just used the select date from table --- the output is like '17-SEP-10 08:02:32'
In the target also the date column data type is Date(Oracle 10g)...
its a one - one mapping...after running the interface ,if we check the date column '17-SEP-10 12:00:00' ,for all the records we are getting the same format.
what might be the issue...... the timestamp is not same as the source ,instead we are getting timestamp 12:00:00 same for all records..
Any changes need here...plz let me know.
Thanks,
Ananth

I'm not sure for you but,
Few times ago we've seen an issue with our dates between source and target DB (both 10g).
when on source there was HH24:MI:SS filled correctly, in target there was always 00:00:00.
It occurs only when we were loading data from one server to another (never when source and target were on same server).
It looks really similar with your issue...
After some search it seems to came from our JDBC driver(Thin one)...
To correct this I add a property in Topology each time I use this JDBC url.
For each Data server I add the following property on Properties tab :
Key = oracle.jdbc.V8Compatible
Value = true
you can maybe try with this...
Hope to help
Regards,
Brice

BUGREPORT: Timestamp issue when creating new url mappings

We have come accross and issue when adding multiple databases and subsiqent url mappings.
the issue presented in the log is
####<Nov 16, 2012 10:49:52 AM CST> <Error> <HTTP> <adeoraapp03.santos.com> <WLS_APEX> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1353025192413> <BEA-101020> <[ServletContext@955221946[app:apex module:apex.war path:/apex spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalArgumentException: Not a correctly formatted timestamp: 2012-11-15T23:52:58.0080Z
     at oracle.dbtools.common.util.Timestamps.valueOf(Timestamps.java:61)
     at oracle.dbtools.common.config.db.UrlMappings$Builder$1PoolFilter.startElement(UrlMappings.java:199)
     at oracle.dbtools.common.x3p.MatchFilter.startElement(MatchFilter.java:54)
     at oracle.dbtools.common.x3p.impl.Event.invoke(Event.java:52)
     at oracle.dbtools.common.x3p.impl.Chain$EventIterator.advance(Chain.java:125)
     at oracle.dbtools.common.x3p.impl.Chain$EventIterator.advance(Chain.java:79)
     at oracle.dbtools.common.util.AbstractIterator.next(AbstractIterator.java:28)
     at oracle.dbtools.common.x3p.impl.X3PReaderAdaptor.next(X3PReaderAdaptor.java:34)
     at oracle.dbtools.common.config.db.UrlMappings$Builder.read(UrlMappings.java:170)
     at oracle.dbtools.common.config.db.UrlMappings.existing(UrlMappings.java:99)
     at oracle.dbtools.common.config.db.UrlMappings.urlMappings(UrlMappings.java:93)
     at oracle.dbtools.common.config.db.DatabasePoolConfig.loadFromXML(DatabasePoolConfig.java:285)
     at oracle.dbtools.common.config.db.DatabasePoolConfig.loadFromDBFromTime(DatabasePoolConfig.java:181)
     at oracle.dbtools.common.config.db.DatabasePoolConfig.getPoolInfo(DatabasePoolConfig.java:54)
     at oracle.dbtools.rt.jdbc.DatabaseConnectionFilter.poolInfo(DatabaseConnectionFilter.java:60)
     at oracle.dbtools.rt.jdbc.DatabaseConnectionFilter.applyDatabaseConnectionInfo(DatabaseConnectionFilter.java:71)
     at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3732)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
This seems to be due to a time format issue when adding new database mapping in the url-mappings
when running the following command
@:as11g_pfrd_prod> java -jar apex.war map-url --type base-path /apexpoc apexpoc
Nov 16, 2012 10:22:57 AM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /data1/software/oracle/product/as11g_pfrd_prod/user_projects/domains/PFRD_Domain/servers/WLS_APEX/apex_config/apex
@:as11g_pfrd_prod> pwd
/data1/software/oracle/product/as11g_pfrd_prod/user_projects/domains/PFRD_Domain/servers/WLS_APEX/stage/apex
After running the command the following entry was added to url mappings file
This resulted in the following entries in url-mapping.xml, (the timestamps are in to be in UTC):
<pool base-path="/apexpoc" name="apexpoc" updated="2012-11-15T23:52:58.0080Z"/>
Which caused the above stack trace and also caused a internal error 500 on the browser when trying to access APEX
we removed the url mapping and ran the following command(at a different time in the day)
@:as11g_pfrd_prod> pwd
/data1/software/oracle/product/as11g_pfrd_prod/user_projects/domains/PFRD_Domain/servers/WLS_APEX/stage/apex
@:as11g_pfrd_prod> java -jar apex.war map-url --type base-path /apexpoc apexpoc
Nov 16, 2012 10:58:35 AM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
INFO: Using configuration folder: /data1/software/oracle/product/as11g_pfrd_prod/user_projects/domains/PFRD_Domain/servers/WLS_APEX/apex_config/apex
which resulted in a new entry in the url mappings table
<pool base-path="/apexpoc" name="apexpoc" updated="2012-11-16T00:28:35.479Z"/>
And the apex listener worked again

Thanks Colm,
Was this a known issue? If so do we have a common "thread" for known issues?
And do we have any idea when 2.0 Final is coming out?

Timestamp issues between mysql 5.0 and 5.1

Slightly off the dreamweaver trail here - but that's what I'm using (CS3)....here's hoping someone knows what the issue is here?
I've created some 'closing soon' and an 'expired' label for some ads I'm running, the php code is below.
<?php
          // get the current timestamp
$now = time();
// get the number of seconds in seven days
$sevendays = 60*60*24*7;
// get the expiry date
$expires = $row_listJobs['job_service_expiry_date'];
if ($expires < $now) {
    // display the expired image
echo '<img src="../../images/buttons_labels/expired.gif" alt="expired job" />';
} elseif ($now + $sevendays > $expires) {
    // display final week image
echo '<img src="../../images/buttons_labels/closingsoon.gif" alt="job closing soon" />';
    ?>
This works absolutely fine when using a Recordset with a UNIX_TIMESTAMP in it, and going into the background the 'job_service_expiry_date' field in mysql5.1.30 using php5.2.8 provides a 'Default' parameter whereby I can set the Default 'as defined' followed by 0000-00-00 00:00:00. There is another date field for job posted - but this is just an ordinary date stamp. None of the fields are set up with current timestamps as I want to be able to update records with dates in the future.
The problem arises specifically with uploading this to my server (hey it's 1&1 shared host, so things are a little restricted). I'm running mysql5.0.67 with php5.2.9 here and the timezone is set to Europe/Berlin. (I'm in the UK). Looking at the background everything is the same EXCEPT for the ability to set the 'Default, as defined etc'. So, all the options I'm left with is to set it as a TIMESTAMP with Default 0000-00-00 00:00:00.
Here's the issue. On browsing the relevant page I'm now presented with an error "Function xnameofdatabasex UNIX_TIMESTAMP does not exist" and the page won't load. This didn't happen during local testing; the page displayed fine, and the php code worked perfectly.
Has anyone else come across this problem and found a way around it?
Could it be the difference in the mysql server versions that is causing the issue?? In which case any pointers on how to amend the fields, SQL query or the php code so that it does work would be really appreciated. Could it work, for example, by setting the posting date as current timestamp and then the expiry date as just a date, with the php code set to display images depending on days ahead of the posted date eg closing soon +25 days, and expired >30 days for example......need help with this as I'm no php expert!
I can add lines to the .htaccess files, but I've tried adding php_value date.timezone 'Europe/London' to it, but get a 500 error. My thinking here was that perhaps it was the timezone difference confusing the php?....but I'm not sure.
Incidently, any ideas on how to set the timezone through .htaccess without getting a 500 error (and within a dreamweaver CS3 environment) would also be welcomed.
Thanks in advance
Matt

Thanks David
I tried adding that line to .htaccess, but received the 500 internal server error when trying to access the site. I've added the other line for the time being -hopefully that works!
The SQL looks like this:
SELECT jobs.job_id, jobs.client_id, jobs.category_id, LEFT(jobs.job_longdesc, 200) AS first200,
jobs.job_imagemini, jobs.job_salary, jobs.job_location, jobs.job_country, jobs.job_title,
jobs.job_posted_date, categories.category_id, categories.category_name,
clients.client_id, UNIX_TIMESTAMP (jobs.job_service_expiry_date) AS job_service_expiry_date,
jobs.job_featured
FROM jobs, categories, clients
WHERE jobs.client_id = clients.client_id AND jobs.category_id = categories.category_id AND jobs.job_longdesc LIKE %var1% AND jobs.job_country LIKE %var2% AND jobs.job_title LIKE %var3%
ORDER BY jobs.job_featured ASC, jobs.job_posted_date DESC, jobs.job_title
Cheers
Matt

Date Timestamp issue

Hi All,
I am having a table in on database with a column of datatype DATE. There is a value which has date with timestamp. When i build an interface in ODI and do a 1-1 mapping with another table in a different database which is also of datatype DATE only DATE appears and the timestamp is missing. The version of ODI i am using is 10.1.3.2.
If the tables are in same database then the samething is working, its accepting Date with timestamp.
Any solution?
Thanks,
Vikram
Edited by: Vikram Datta on Nov 14, 2008 3:06 AM

Hi Vikram,
Unfortunately this is a issue that happens when the data "travel" thru agent.
There are some ways to solve that:
1) create an temp table (yellow interface) just like the target table but with all Date columns to varchar and use the "to_char" function at source. After that, create a second interface from this temp table to target but now with "to_date" at staging area.
2) customize your KM to do it for you. I mean, make the km works like above, but at its work tables (C$, I$) keeping the transformation implicit (invisible) to the programmer but as explicit conversion to the database.
3) take a look at what is the default timestamp format at target database and make the transformation to it (to_char) letting an "implicit conversion" to the target database.
The problem here is: If the default format change, all interfaces will need to be altered.
4) customize the KM to set the format datatime at database for the ODI step and use this format at "to_char" mapping.
To any solution where the "to_char" is used, the mapping must be at source.
I always have been used the second option.
Does it help you?
Edited by: Cezar Santos on 16/11/2008 11:25

IPhone 4 SMS Timestamp Issue

Hi,
I have never had any problems with my SMS timestamps but all the messages I am receiving today are displaying the wrong ones. For example with one person I was texting, the timestamp in the main inbox was coming up as 'yesterday' when we had been sending messages to eachother this afternoon. I deleted all the messages that I got from her 'yesterday' and a new timestamp appeared and it was the time of the first message I received off her today.....no matter how many texts to and from we send it wont update. I'v made sure all the time/date settings of the phone are right and even restored it in the hope of fixing it. If anyone could shed some light on this it would be a great help, it's driving me absolutely crazy!
Thanks!

Is it just with the one person? Is it with all people on a particular carrier? I'm wondering if it could be a carrier issue. I'd suggest calling yours as a start.
Best of luck.

Grapher utility issues (Lion's fault?)

I'm having trouble with the Grapher utility and defining/graphing functions. If I define a function, say f(x) = x^2, and then try to graph a transformation of it, say y=f(x-2), Grapher displays only a graph of y = f(x). All transssformations within the function yield the same results; and transformations outside of the function behave as they should.
I am not sure if this is an issue with Lion, but I only saw the problem after I updated. Prior to that, there were no problems.
Thanks,
Jarrod

Hi,
Defining a function in Grapher 2.2 : the variable must not be x y   r   theta (never use 2D coodinates) ; tried now on a MacBook Pro 15" Lion Grapher 2.2.
Defining a function in Grapher 2.1 : the variable may be x y   r   theta (you may use 2D coodinates) ; tried now on a iMac 20" early 2006 Snow Leopard Grapher 2.1.
In your example use    f(t) = t^2   and    get correct curves   y = f(x)   and   y = f(x-2)
It's new but not a bug. Is this change useful ? I must say functions look now quite different from curves equations.
So long,
   YB24

Date and timestamp issue please help

In the following creation_date is DATE datatype.
creation_time is VARCHAR2 having only MI:SS (16:02).
:DATE_LAST_CHECKED is VARCHAR2 having string without time.
If that be the case how can I compare these 2 statements with the time. I need to compare with timestamp.
Please let me know.
TO_DATE(TO_CHAR(TRUNC(csa.CREATION_DATE),'DD-MON-YYYY') ||' ' || csa.creation_time,'DD-MON-YYYY HH:MI pm')
= TO_DATE(NVL(:DATE_LAST_CHECKED,SYSDATE-5),'DD-MON-YYYY HH24:MI:SS')

I won't even ask why creation_date and creation_time are split out into separate columns. The DATE datatype supports both and you will have to code conversions like this all over the place.
to_date(to_char(csa.creation_date, 'mm/dd/yyyy') || csa.creation_time, 'mm/dd/yyyyhh:mi pm')
= nvl(to_date(:date_last_checked, 'mm/dd/yyyy'), trunc(sysdate - 5))

Xy-graph timestamp issue

Similar Messages

Maybe you are looking for