Y 70-70 screen : problems with the black and white colors

Hi all, I just bought a Lenovo Y70-70 and already encountered several problems with the screen :- I had to change the notebook twice because of clearer zones on the black and because of dead pixels- The model I have now still presents irregularities in the black : if the screen is black, I can still see a few clearer zones on it, especially (but not exclusively) on the edges- concerning the white, I am a bit disappointed too : this color present zones that are sometimes ok, sometimes more yellow. Even if it is subtle, I nevertheless particularily see this effect when reading or typing, due to an optical effect that amplifies the phenomenom when text is displayed which tires my eyes. I also see it on colors like beige or grey. As I use this computer to play but also to work, it is uncomfortable. What I would like to know is if these problems are inherent to the screen, or if it is a defect. What should I do ? Did other people encounter the same problems ? I didn't find any setting to improve it. I found that these problems may be link to these, reported on the Y50-70 :- https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Yellow-Dark-Yellow-Screen-Calibration/td-p/1868613- http://www.amazon.com/gp/customer-reviews/RCQNONXIKJJ5D/ref=cm_cr_pr_viewpnt?ie=UTF8&ASIN=B00MCJQ6MI#RCQNONXIKJJ5D Othewise this notebook is OK, playing with it is a real pleasure. Thank you for your answer,S.

Installation of Mavericks is the culprit here. Lightroom versions 4.4 and earlier are not fully compatible with OS 10.9.x. There will be no more updates to Lightroom version 4.x so the only fix is to upgrade Lightroom to 5.0 or later or reinstall an older OS on Mac.

Similar Messages

Y70-70 screen : problems with the black and white colors

Hi all, I just bought a Lenovo Y70-70 Touch and already encountered several problems with the screen :- I had to change the notebook twice because of clearer zones on the black and because of dead pixels- The model I have now still presents irregularities in the black : if the screen is black, I can still see a few clearer zones on it, especially (but not exclusively) on the edges- concerning the white, I am a bit disappointed too : this color present zones that are sometimes ok, sometimes more yellow. Even if it is subtle, I nevertheless particularily see this effect when reading or typing, due to an optical effect that amplifies the phenomenom when text is displayed which tires my eyes. I also see it on colors like beige or grey. As I use this computer to play but also to work, it is uncomfortable. What I would like to know is if these problems are inherent to the screen, or if it is a defect. What should I do ? Did other people encounter the same problems ? I didn't find any setting to improve it. I found that these problems may be linked to these, reported on the Y50-70, supposing the screens of both models are the same (which I don't know) :- https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Y50-Yellow-Dark-Yellow-Screen-Calibration/td-p/1868613- http://www.amazon.com/gp/customer-reviews/RCQNONXIKJJ5D/ref=cm_cr_pr_viewpnt?ie=UTF8&ASIN=B00MCJQ6MI#RCQNONXIKJJ5D Othewise this notebook is OK, playing with it is a real pleasure. Thank you for your answer,S.

There can be several things that could effect your issue. If you are using a color calibration device, it may change your white balance. Check and verify that you really are using pure white when filling, a value of 255, 255, 255 thats red, green, and blue. Check and see what color mode you are in, are you in 8 bit, 16 or 32 bit. Are you in RGB, CMYK, or other color mode.
I am sure there are a few other things, that I haven't thought of at the moment that can effect your issue.
The next question is what do you mean by black and white? or should I say how did you make it that way. Was it already a black and white (grayscale)? or did you convert it in photoshop and if so how. The reason I ask is there are more than one way to convert a color image to black and white and how you do it will effect the final outcome.

How can I print with the black and white cartridge only?

I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
The printer is out of ink.
The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
How can I print with the black and white cartridge only?
Mac OSX 10.7.3
HP Photosmart C7280 (7200 series)
This question was solved.
View Solution.

I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!! I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
You should be ashamed!!

Problems with Photoshop black and whites...?

After comparing the black&white colours from Photoshop to Paint, I noticed that the black&whites isn't as "sharp" in Photoshop. I also noticed that the white colours isn't really "white" since I wasn't able to fill the white parts instantly with the Paint Bucket Tool, unlike using Fill in the Paint program. Does anyone know how I can get around this?

There can be several things that could effect your issue. If you are using a color calibration device, it may change your white balance. Check and verify that you really are using pure white when filling, a value of 255, 255, 255 thats red, green, and blue. Check and see what color mode you are in, are you in 8 bit, 16 or 32 bit. Are you in RGB, CMYK, or other color mode.
I am sure there are a few other things, that I haven't thought of at the moment that can effect your issue.
The next question is what do you mean by black and white? or should I say how did you make it that way. Was it already a black and white (grayscale)? or did you convert it in photoshop and if so how. The reason I ask is there are more than one way to convert a color image to black and white and how you do it will effect the final outcome.

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

IPhone 5c was powered off; when turned back on screen only shows in black and white. Have tried several times with no success. Any suggestions?

I purchased the iPhone 5c about 4 months ago. I turned it off briefly last night and when I turned it back on, the screen wallpaper and app icons are now in black and white. I have tried turning it off and on again several times with no success; screen still shows only black and white. All other functions of phone/text work correctly. Any suggestions on what to try?

Hello Teri,
You may have greyscale turned on. Try going to Settings > General > Accessibility and toggle that off and it should go back to color. Check out the page below for more information.
Invert Colors and Grayscale
http://help.apple.com/iphone/8/#/iph3e2e1fb0
Regards,
-Norm G.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Problem with the MenuBar and how can i delete a own component out of the storage

Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
Matze

If you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder.

Is there a problem with the itunes and quick time download pages or is it my internet.

Is there a problem with the itunes and quicktime download pages or is it just my internet.

Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/

HT4972 I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrad

I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?

try rebooting your computer.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

How can I add the date at the top of the screen along with the day and time display?

Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!

Open System Preferences>Date & Time:
Ciao.

I bought my iphone unlocked from carephone warehouse, I had a problem with the phone and apple swapped it over but they locked it to tmobile!!! what can i do?? I have changed contracts and can not use my phone!

I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?

In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets.

I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?

I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?

Since your iPhone is still under the one year warranty contact Apple Support or visit an Apple store to get a replacement.
Apple Support - http://support.apple.com/kb/HE57

Y 70-70 screen : problems with the black and white colors

Similar Messages

Maybe you are looking for