Y battery has an x symbol and says no batteries available

hi there  i have been having a lot of truble recently with my 2011 macbook pro 13 inch. I was wondering if there was anyway to solve it. I happen to have the x sumbol on my battery when i turn on my computer. I also have another question if my computer has things to connected to it via bluetooth, if i end up resetting the computer would the connecion be lost or would it still function. I have looked up my battery infromation on this. Even though my charger is plugged into it the light on the charger wont go on and the system report says that there is no charge.  Here is what the system information looks like.
Battery Information:
  Charge Information:
  Charge Remaining (mAh):    0
  Fully Charged:    No
  Charging:    No
  Full Charge Capacity (mAh):    0
  Health Information:
  Cycle Count:    0
  Battery Installed:    No
  Amperage (mA):    0
  Voltage (mV):    0
System Power Settings:
  AC Power:
  System Sleep Timer (Minutes):    15
  Disk Sleep Timer (Minutes):    10
  Display Sleep Timer (Minutes):    15
  Automatic Restart on Power Loss:    No
  Wake on AC Change:    No
  Wake on Clamshell Open:    Yes
  Wake on LAN:    Yes
  Current Power Source:    Yes
  Display Sleep Uses Dim:    Yes
  PrioritizeNetworkReachabilityOverSleep:    0
  RestartAfterKernelPanic:    157680000
  Standby Delay:    4200
  Standby Enabled:    0
  Battery Power:
  System Sleep Timer (Minutes):    15
  Disk Sleep Timer (Minutes):    10
  Display Sleep Timer (Minutes):    3
  Wake on AC Change:    No
  Wake on Clamshell Open:    Yes
  Display Sleep Uses Dim:    Yes
  Reduce Brightness:    Yes
  RestartAfterKernelPanic:    157680000
  Standby Delay:    4200
  Standby Enabled:    0
Hardware Configuration:
  UPS Installed:    No
AC Charger Information:
  Connected:    Yes
  Charging:    No
please let me know as soon as possible. I am welcome to hear everybody's opnion on the matter. thank you so much for any help or comments

Your Mac doesn't think that there's a battery installed. You could open it up and see if the cable connection has come loose. If it is connected, then the battery is simply dead and you'll need to have it replaced.
Good luck,
Clinton

Similar Messages

  • HT4623 My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't

    I clicked the button in my setting thatz is saying "software update iOS 6.1.2. It turned off and now My iPad 2 is stuck on a black screen that has the iTunes symbol and a charger that I'm guessing means "plug into iTunes". I did so and then waited four hours to download something. And now it is saying that its going to update my iPad but it isn't working. I tried to "update" twice. I am VERY ANNOYED beczuse the last time i updated it, it just turned off and i didnt have ot plug it in or anything. WHY IS IT DOING THIS.....?????? My ipad will not turn on or anything. Help me FIX THIS!!!

    hi Kinney. last hour, i update my ipad 2, then im having the same problems as u. im also hoping people can solve this issue.

  • Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it

    Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it

    Try:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off

    I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!

    Hello there, xkatiex255.
    The following Knowledge Base article should provide the steps for you to resolve your issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hi, My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    Hi,
    My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    While connected to iTunes, try...
    http://support.apple.com/kb/HT1808

  • I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say: You: Error access violation at 0x0055F525

    I start the computer the screen has blue vertical stripes and says that the Adobe Air application can not be found. Some of my programs don't run and say:
    You: Error access violation at 0x0055F525. I reinstalled Adobe Air. No change. I went to the Adobe webside and they said to repair it with a program. I bought RegCure. Didn't change anything. What to do?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • I have been using airplay speakers for about 18 months successfully and I now find that it has a locked symbol and not always obtainable

    I have been using airplay speakers for about 18 months sucessfully and now find it has a locked symbol and isn't always available

    I have been using airplay speakers for about 18 months sucessfully and now find it has a locked symbol and isn't always available

  • My creative cloud wont do anything is just has a loading symbol and nothing happens

    my creative cloud wont do anything is just has a loading symbol and nothing happens, any ideas on how to fix this?

    App doesn't open | Progress wheel spins continually

  • HT4623 hello my iphone which has battery has been turned off and can not start it up

    Hello
    My Iphone 4 GSM which has battery has been turned off and I can not do nothing , not turn on

    Hi Mineh,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    I hope this information helps ....
    Have a great day!
    - Judy

  • TS3048 I changed the battery in my wireless keyboard and checked the batteries to make sure that they work.  When I returned to my computer (the computer was already on) the keyboard would not work, no response at all.  What do I do?

    I changed the battery in my wireless keyboard and checked the batteries to make sure that they are good, I left the computer on while I changed the batteries. When I returned to the computer, the computer does not acknowledge the keyboard so I can't do any diagnostics. What do I do?

    Hold the power key on the keyboard down for 5 secs to power off,  tap the power button once to start.   It should connect automatically.

  • HT1338 How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available"

    How do I get a driver for my Epson Stylus Photo 1400 so that it will run with Mountain LIon?  I tried "Software Update" and says "no update available".  I contacted Epson and was told all driver updates had to be obtained using "Software Update"?

    You will find the latest Epson drivers herehttp://support.apple.com/kb/DL1398.
    If you don't find a driver for your printer in the above, then install the Gutenprint drivers. It supports your model.

  • I was trying to restore ipod touch now it has itune connect symbol and wont connect

    I was trying to restore my ipod and something happened now it has come up with itunes connection symbol and wont do anything now

    - Let the battery fully drain. After charging for an hur try a reset:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Tehn connect to your computer and restore via iTunes is necessary.
    - If you still have the white screen it is time for an appointment at the Genius Bar of an Apple store.

  • My ipod doesnt start on when off the charge and wont come on when i plug it into the computer, now it has the iTunes icon and says to plug it into that, but i cant cause it wont turn onto my computer. How do i get my pictures back?

    So, my ipod will not stay on, when I take it off the charger it just goes dead. I cannot plug it into the computer and have it go on; I guess it doesn't have enough power for the battery. But, just the other day, I unplugged my ipod (went dead) plugged it back into my kitchen and now it goes on but an ITunes icon pops up and says for it to be plugged into it, but like I said it doesn't work on the computer. So, now I lost all my pictures but I was wondering how I can get them back? Or get rid of the Itune icon to actually get back on my ipod?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              

  • What is the most recent update to iPhoto?  I have a note about 9.5 yet my macPro has 9.4.3 and says I am current.

    What is the most recent update to iPhoto?  I am transferring my library from a remote drive to my macPro, using iPhoto library manager, and get a message that the pictures I am transferring are in iPhoto 9.5.  My computer has 9.4.3 and it says my software is up to date.

    iPhoto 9.5.1 is the most recent iPhoto version. However, iPhoto 9.4.3 is the last iPhoto version for your OS X version. If you want to use iPhoto 9.5.1, you need to upgrade to OS X Mavericks. You can download it from the Mac App Store.
    Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • My daughter forgot her password and now her ipod has locked her out and says disabled connect to itunes.  The computer which this ipod was synced has crashed.  How can I fix this?

    My daughter forgot her password and now her ipod has locked her out ir says disabled connect to itunes.  The computer she last synced to has crashed.  How can I unlock this ipod? 

    The device will have to be restored but without the last computer it was synced to, that's not a possibility.
    Take the iPod to an Apple store or Apple certified repair shop.
    You will need a computer in order to sync, restore, and update the iPod in the future.
    "If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it."
    From here:  iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

Maybe you are looking for

  • Why does "itunes accounts" use data with all settings OFF?

    Does anyone know how to keep "iTunes accounts" under system from using cellular data? I have already: 1. Toggled OFF all settings in the "Use cellular data for" menu. 2. Turned OFF all automatic downloads and any other options under iTunes/app store

  • Dynamically create drop down box with JSP

    Hi, I hope this is not a repeat post, I have search the forum and a posting has not jumped out at me. I am making a jsp that dynamically constructs a custom SQL query. I have a number of text boxes with an id, my jsp page calls a servlet, the servlet

  • 2 problems! - RAM module broken & Snow Leopard not loading

    Hi, I have 2 problems: I got Mac Mini (late 2009 model, 2,26ghz, 2gb) upgraded from 2GB to 4GB from this Apple Premium Reseller (http://www.stormfront.co.uk/). When I got it back and switched it on and immediately got 3 beeps which indicated bad ram

  • How to Maintain Default materials for clearing house fee (IS Oil) O3RECH1

    Hi, I am an ABAPer. I have come accross one issue in Transaction O3RECH1 (Create CH Settlement/ Transmission). I am getting error. as No Material Exist. .. In debugging i came to know that material is empty since there is no data in field FEEMATNR  o

  • Using Sun JSF in JBoss-4.0.5GA

    Using Sun JSF 1. In $JBOSS_HME/server/server-name/deploy/jbossweb-tomcat55.sar/conf/web.xml, comment out the following lines (line 243 - 247) <init-param>   <description>MyFaces tlds</description>   <param-name>tagLibJar0</param-name>   <param-value>