Y_GCD_19000119 report problem. System is picking M rate instead of P rate.

Hi,
Report Y_GCD_19000119 should use the 'P' Exchange Rate (Standard translation for cost planning) when converting from EUR to USD.  Currently the report is not converting at the correct rate, which can be demonstrated when comparing a manual calculation with the P rate versus the rate being used in SAP, and noting that the two do not match.
The system is picking 'M' Rate instead of 'P' Rate.
Thanks.

Hi Ravi,
Please check the configuration in SPRO under Controlling > Cost Center Accounting>Planning --> Manual Planning --> User-Defined Planning Layouts --> Create Planning Layouts for Activity Type Planning
Click on Fixed Price and change the required currency.
Than You.
Regards,
AVD

Similar Messages

  • In IDoc system is picking Plant code instead of Ship to party.

    Hello Experts,
    I am not so good in Idoc process.
    When I am reprocessing the IDoc I came to know that system is picking Plant code (plant address) instead of Ship to party code.
    Kindly let me know How can I check it ?
    How I can reprocess it ?
    is there any way/t-code we can track the mapping in Idoc ??
    Awaiting your precious reply.
    Thanks,

    Hi,
    Please provide your scenario
    because Message type and Basic IDOC type varies from process to process
    if you know Message type, check in WE41/WE42
    and underneath you can get logical message as well

  • Charged Mobile rate instead of Landline rate

    For several years I call my elderly mother in New Zealand from the USA, on her landline, for a rate of 2.3cents.  As of this past week, I am being charged the mobile rate of 9.7cents, and the reception is terrible.  I have tried to change the icon showing SMS to reflect her landline number, but the same rate of 9.7cents appears..... I need your help please because I cannot figure out why this inconvenience has occurred.  I have a subscription of $10 that automatically renews itself whenever it runs down and at the current mobile rate of 9.7cents, I'm using up my skype credit very, very fast.  Please advise how I can get back my landline rate of 2.3cents.....thank you.

     Hello and welcome to the Skype Community.
    Actually you are being charged at the landline rate of 2.3 cents per minute plus a connection fee of 4.9 cents per call [not per minute]. You can avoid the connection fee by using a Subscription to fund your calls instead of credit.
    Skype subscription
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Intrastat Report RVEXST00 & RMIMST00 not picking up 'I' Rate

    Hi,
    hope someone could share some insign on this intrastat 'I' rate, we have set-up the intsastat report in our development Box and currently performing some testing, we notice that when we select the intrastat rate from the selection screen the systems does not select the 'I' rate, instead its still selecting the 'E' rate. I am just wondering have anyone enconter the same issue which we are facing.
    in the above example, we have maintain both rates, E rate which we use on a daily basis and also we have created 'I' rate for intrastat. When we execute the report we selected intrastat rate, however the outcome of the report shows the 'E' rate is used and not the 'I' rate.
    Hope someone can share something.
    Regards
    Ken

    Dear Sonni,
    First of all are you sure that the exchange rates are coming correctly from Source to BW.
    If not do the below mentioned procedure.
    RSA1 --> goto source system --> right click on your source system --> select Transfer Exchange Rates --> select the mode of transfer and excute it
    hope it will solve your problem.
    With Regards
    Arun
    Edited by: Arun Aravapalli on Mar 17, 2010 1:08 AM

  • Hi Expert , crystal report export problem. system not responding

    Hi,
    crystal report export problem. system not responding.
    Thanks
    Rajkumar Gupta

    Dear Raj,
    Please try this
              Try
                Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
                Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
                Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
                Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                rptDoc.Load(rptPath)
                rptView.ShowExportButton = True
                rptView.ReportSource = rptDoc
                For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                    oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                Next
                For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                    For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                        If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                            oSubReport = rptObject
                            rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                            For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                                oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                            Next
                        End If
                    Next
                Next
                'Setting Paper
                Dim rawKind As Integer = 0
                Dim printSet As New System.Drawing.Printing.PrinterSettings
                For i As Integer = 0 To printSet.PaperSizes.Count - 1
                    If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                        rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                        Exit For
                    End If
                Next
                Dim MyTest As New SaveFileDialog
                rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
                rptDoc.ExportToStream(ExportFormatType.Excel)
                'rptDoc.SaveAs("C:\TBKING.xls", True)
                '''How to export the report
                Try
                    Dim CrExportOptions As ExportOptions
                    Dim CrDiskFileDestinationOptions As New _
                    DiskFileDestinationOptions()
                    Dim rename As String
                    rename = rptName.Replace(".rpt", "")
                    Dim CrFormatTypeOptions As New ExcelFormatOptions
                    CrDiskFileDestinationOptions.DiskFileName = _
                                                "c:\Report\" & rename & "_Export_File.xls"
                    CrExportOptions = rptDoc.ExportOptions
                    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.Excel
                        .DestinationOptions = CrDiskFileDestinationOptions
                        .FormatOptions = CrFormatTypeOptions
                    End With
                    rptDoc.Export()
                Catch ex As Exception
                    MsgBox(ex.ToString)
                End Try
                '' end by kevin shah
                rptView.Show()
                rptView.ShowExportButton = True
                Dim oFrm As New System.Windows.Forms.Form
                rptView.DisplayGroupTree = True
                rptView.Dock = System.Windows.Forms.DockStyle.Fill
                rptView.Location = New System.Drawing.Point(0, 0)
                oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
                oFrm.Controls.Add(rptView)
                oFrm.Name = "Report Viewer"
                oFrm.Text = "Report Viewer11"
                oFrm.ResumeLayout(True)
                oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
                oFrm.TopMost = True
                oFrm.ShowDialog()
            Catch ex As Exception
                objMain.objApplication.MessageBox(ex.Message)
            End Try
    By pressing this button XLS file be generated on C:\report\
    Hope this will resolved the issue
    Thanks
    Kevin

  • Third party in my problem system launch daemons

    I read in another post that if I had third party links in my problem system launch daemons section, then I had a problem.  I have ftp-proxy.plist listed under that section.  This is my etrecheck report.
    Hardware Information:
              iMac (27-inch, Mid 2011)
              iMac - model: iMac12,2
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              4 GB RAM
    Video Information:
              AMD Radeon HD 6770M - VRAM: 512 MB
    System Software:
              Mac OS X 10.7.5 (11G63) - Uptime: 2 days 1:48:13
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 999.35 GB (459.17 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Internal Memory Card Reader
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple, Inc. iMac
    Kernel Extensions:
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    Problem System Launch Daemons:
              [System] ftp-proxy.plist 3rd-Party support link
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.carbonite.launchd.carbonitedaemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [System] com.carbonite.launchd.carbonitealerts.plist 3rd-Party support link
              [System] com.carbonite.launchd.carbonitestatus.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              Spotify
              NETGEARGenie
    Internet Plug-ins:
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.1
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Audio Plug-ins:
              iSightAudio: Version: 7.7.1 - SDK 10.7
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    3rd Party Preference Panes:
              Carbonite  3rd-Party support link
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   1%          WindowServer
                   1%          EtreCheck
                   1%          NETGEARGenie
                   1%          Finder
                   1%          NETGEARGenieDaemon
    Top Processes by Memory:
              254 MB          WebProcess
              225 MB          Safari
              197 MB          Deskjet_3050A_J611_series__144729_
              147 MB          PhotoStreamAgent
              139 MB          mds
    Virtual Memory Information:
              348 MB          Free RAM
              1.87 GB          Active RAM
              586 MB          Inactive RAM
              1.21 GB          Wired RAM
              2.56 GB          Page-ins
              1.59 GB          Page-outs
    Any Input?  Thanks.

    Symptom:  You have a very large number of pageouts for having been up for only 2 days since your last boot.  that averages out to 2 pageouts per minute, and since you most likely are not using your Mac 24/7, you most likely had some very high pageout rates while you were using your Mac.
    A high pageout rate generally results in slow performance.
    Why you have a high pageout rate is unknown, but you should look for memory hungry apps.  Activity Monitor can help there.
    Carbonite can add to your disk contention if it is doing backups while you are using your system.  If it is doing backup during the middle of the night while you are sleeping, that is not an issue.
    You could consider either running fewer memory hungry apps concurrently, or adding more RAM to your system (Crucial.com and MacSales.com are highly respected RAM vendors by this and other Mac related forums).
    If you suspect 3rd party additions affecting your performance, you could boot in "Safe Mode" which will not load 3rd party stuff during boot and login.  Boot holding the "Shift" key to enter Safe Mode.
    You could also run 'sar -g' to monitor your pageout activity over time both in "Safe Mode" and booted normally
    Applications -> Utilities -> Terminal
    sar -g 60 100
    which will report your pageouts once a minute for 100 minutes (adjust the numbers to suit your tastes).  Now use your system as you normally would, and go back and review the sar output when you notice you are experiencing performance issues.  What you really want to see is mostly zeros, with an occasional blip of a few pageouts.  Sustained pageouts or huge runs of high pageout numbers is an indication that you are using more RAM than you have available and should look for why, and if the app you are running really does need lots of RAM, then think about buying more.

  • BW Report requirement (Trend Analysis Report (Project Systems))

    Hello, BW experts……
    I need some help….
    This requirement is for Trend Analysis Report (Project Systems)
    I am loading data from ODS to Cube as a Delta Upload
    ODS is getting data from R/3 data source as a full upload (no delta in the Datasource)
    I added one custom field in the cube (0PS_C04) and that custom field (Date field) is going to pick current date (Sys date) through formula in the update rules.
    When I am loading data from ODS to Cube, if the value is coming to the amount field, then the current date field is going to get the current date to the cube
    If there is no record is updated in R/3, then delta is not going to update any record to the Cube.
    If no record is updated to the cube to the particular project number, then Date field is not going to get any data from update rules.
    But I need to see all dates in the cube even though there is no update in the R/3 for that project.
    Example:
    Proj---day1        2       3      4     5      6
    -XYZ---     10        5      --      3     --     2
    In the report now I am able to see some thing like this
    Project   day1        2      4     6
    XYZ        10        5     3     2
    But I am expecting some thing like this…
    Project   day1        2       3      4     5      6
    XYZ        10        15       15     18     18     20
    Can anyone please help me in this…..
    Any input is strongly appreciated
    Thanks,
    Rajesh

    Rajesh,
    Exception aggregation with last value and reference characteristic as calday should solve the problem.
    Cheers
    Aneesh

  • Crystal report problem

    Post Author: ranganadhkodali
    CA Forum: Authentication
    Dear Group Members,
    I have a vary big problem with crystal report XI edition, I am
    unable to find the cause of the problem actually.
    I am using Crystal Report XI Developer version to build
    reports in my development system, which I am, using SQL server 2005 as a
    backend database and u201CUn-Typedu201D Pull
    model for generate reports, in that my system those are working very good.
    For distribute those reports to the other clients, I was
    prepared one small windows application in .net and I placed one shared
    directory. Application will show all report files placed under the shared
    directory by the user selection.
    If User selects one report, I am taking the selected report
    from the shared directory and open with the .net embedded crystal report
    viewer, while opening I was filling the
    server login information(By code itself).
    Any way application also working very well in my development
    system, for deploys this application I added crystal report redist package that
    is came with the visual studio 2008.
    When I run the same application, in deployed
    system, it showing login database dialog with empty database name, and one more
    thing is that database text box also showing like disable. So even I unable to
    give database credential with in dialog. I donu2019t understood what is the cause
    of the problem?
    Almost same problem was happen before 4 months back for some
    other project, @ that time I rebuild my report with the PUSh model, and it
    working well. But this case, I donu2019t have a chance to do like that, because daily
    I should generate some kind of reports, needs of management. That management
    staff will check reports from with that my distributed application. For these
    all things, I canu2019t rebuild and redistribute my application every time if I add
    new report. So that I placed one shared folder and, I keep update all changed
    reports files in that shared folder, my application will show them.
    What is the cause of the problem?
    Is it problem with connection? Then it should not work with
    in my development system also
    Then it probably problem with the deployment? Then I am able
    to view the initial report, problem came only when I refresh the data?
    If problems with deployment, then how it is works for push type reports, it giving problem
    for only pull type reports?
    thanks and regards Ranganadh Kodali

    Please visit:
    www.geocities.com/pmk16
    Regards,
    pmk16

  • How do I fix problem system launch daemons?

    Hi there,
    I recently upgraded to Yosemite and immediately my Wired memory started taking over my RAM.  I'm down to a crawl and have spent days trying to figure out what's going on.  I've repaired the drive and reinstalled twice, etc.  I did find through EtraCheck that I had failed problem system launch daemons.  Could those be my problem?  If so, what do I do to fix them?
    Here's the EtreCheck info:
    EtreCheck version: 2.0.6 (91)
    Report generated October 27, 2014 at 10:16:53 AM PDT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      16 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 1:42:55
    Disk Information: ℹ️
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 318.84 GB (16.67 GB free)
      Core Storage: disk0s2 319.21 GB Online
      OPTIARC DVD RW AD-5970H 
    USB Information: ℹ️
      Western Digital My Book 111A 3 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Fortress of solitude (disk2s2) /Volumes/Fortress of solitude : 3 TB (458.35 GB free)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.sophos.driver.devctrl (9.1.56 - SDK 10.6) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
      /System/Library/Extensions
      [not loaded] com.cisco.cscotun (1.0) Support
      /Volumes/Fortress of solitude/Drive Stuff/Extras/WD +TURBO Installer.app
      [not loaded] com.wdc.driver.1394HP (1.0.9) Support
      [not loaded] com.wdc.driver.USBHP (1.0.11) Support
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.wdhelper.plist
      [failed] org.cups.cupsd.plist
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [invalid?] com.cisco.anyconnect.gui.plist Support
      [failed] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.mozy.status.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.sophos.uiserver.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.cisco.anyconnect.vpnagentd.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.mozy.backup.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.devicecontrol.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.managementagent.plist Support
      [running] com.sophos.messagerouter.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.akamai.single-user-client.plist Support
      [running] com.spotify.webhelper.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items: ℹ️
      Dropbox Application (/Applications/Dropbox.app)
      WD Quick View Application (/Library/Application Support/WDSmartware/WDQuickView.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 10.1.12 Support
      SharePointBrowserPlugin: Version: 14.3.1 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 60 Check version
    User Internet Plug-ins: ℹ️
      Picasa: Version: 1.0 - SDK 10.4 Support
    3rd Party Preference Panes: ℹ️
      Akamai NetSession Preferences  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      MozyHome  Support
      WDQuickView  Support
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: YES
      Destinations:
      Mirror Image [Local]
      Total size: 3 TB
      Total number of backups: 4
      Oldest backup: 2014-08-12 22:54:58 +0000
      Last backup: 2014-10-24 18:24:08 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          74% SophosAVAgent
          11% WindowServer
          4% Activity Monitor
          2% Sophos Anti-Virus
          2% sysmond
    Top Processes by Memory: ℹ️
      567 MB com.apple.photostream-agent.ImageConversionService
      172 MB mds_stores
      172 MB SophosScanD
      172 MB SophosAVAgent
      155 MB InterCheck
    Virtual Memory Information: ℹ️
      1.35 GB Free RAM
      3.30 GB Active RAM
      4.11 GB Inactive RAM
      7.34 GB Wired RAM
      5.52 GB Page-ins
      2 MB Page-outs

    Here's how you fix it. Quit "etrecheck" if it's running. Drag it to the Trash. Empty. Problem solved.

  • Problem description: My iMac (early 2008) with OS 10.10.2 runs slow.  I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

    Problem description:
    My iMac (early 2008) with OS 10.10.2 runs slow.  I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
    EtreCheck version: 2.1.8 (121)
    Report generated April 14, 2015 at 9:50:48 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (24-inch, Early 2008) (Verified)
        iMac - model: iMac8,1
        1 3.06 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR2 SDRAM 800 MHz ok
            BANK 1/DIMM1
                2 GB DDR2 SDRAM 800 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 8800 GS - VRAM: 512 MB
            iMac 1920 x 1200
    System Software: ℹ️
        OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
    Disk Information: ℹ️
        Hitachi HDS721010KLA330 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.Maps.pushdaemon.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.SafariNotificationAgent.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        [killed]    com.apple.warmd_agent.plist
        11 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nesessionmanager.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    org.cups.cupsd.plist
        12 processes killed due to memory pressure
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        ChronoSyncBackgrounder    Application  (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
        Google Drive    Application  (/Applications/Google Drive.app)
    Internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 6.1 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
        OVSHelper: Version: 1.1 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
        iPhotoPhotocast: Version: 7.0
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        WebEx: Version: 1.0 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS2  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        VIA PrefPane  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             3%    WindowServer
             3%    Mail
             2%    com.apple.iCloudHelper
             1%    Creative Cloud
             1%    Google Chrome
    Top Processes by Memory: ℹ️
        223 MB    Google Chrome
        150 MB    Finder
        129 MB    Google Chrome Helper
        112 MB    Mail
        69 MB    Google Drive
    Virtual Memory Information: ℹ️
        35 MB    Free RAM
        1.45 GB    Active RAM
        1.45 GB    Inactive RAM
        888 MB    Wired RAM
        27.01 GB    Page-ins
        851 MB    Page-outs

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Manual BRS system not picking the doc for clearing the payment

    While processing Manual bank statement if i am  using referance doc no system not picking doc no for clearing the bank payment. So that after finishing BRs I am matching the doc manually, in f-04. This is taking long time for processing. Anyone can tell me why ref doc no not working and to make it to work, or else any problem is there to use the field. please solve my query.
    Edited by: MANISFICO1 on Aug 1, 2011 11:49 AM

    Hi:
           Please follow as given and hopefully you will be able to resolve the issue.
    1...Go to SPRO...Financial Accounting....Bank...Business transactions...Payment Transactions...Manual Bank Statement..Create a new transaction with sign - and do not assign anything in posting rule for now and enter 15 in Algorithm field , save.
    2...In define posting keys and posting rules...create an account symbol for the one you did in step 1..In Assign account to account symbol please use account symbol created earlier and acc mode + and currency should be + too. In GL Account area please list the outgoing GL which you are using for outgoing postings..
    In create key for posting rule define a posting rule and now go back to step 1 and assign the posting rule you created to the transaction type
    In define posting rules please maintain posting rule as define above...in posting area assign 1. give nothing in first posting key.assign account symbol as created earlier...now give give posting key 50..give account credit Bank...and a suitable document you use for posting BRS...In posting type give 4.
    Your Manual Bank statement is ready ....
    Go to FS00 select your bank outgoing GL account there and in create/bank.interest tab double click on Field status group..in general data make assignment number mandatory for posting...
    Go to FB50....post and outgoing transaction using the GL given above it will require you to enter assignment number enter 123 and post.
    In FF67 Select the new statement , proceed with your normal data entry and give the transaction you created in above , enter value date, amount and in bank ref field enter 123 as given in FB50.
    Save and post it. Now it should work.
    Regards

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • Reporting Problems on Beta Server

    Regarding the beta server at http://htmldb.oracle.com/pls/otn, is there a protocol to report problems on this server? For example, I was doing some development work this morning using the westend workspace and launched an infinite loop by mistake. Oops... my bad. I'm not in any hurry to fix it but it's certainly a drain on the system and it must be annoying to other users who experience a slow-down in performance. It would be useful to be able to report a mistake right away. I can't see any of the dictionary views to tell if it's still running, but the system behaves as if I have some DDL locks as a result of this particular process. I can understand that it might be a pain to set up a system to report problems so I'm wondering if setting a cpu limit/call would be a prudent method of eliminating run-away processes.

    Jeff,
    There is no formal process to report this type of issue. This OTN forum is probably the best mechanism.
    This is not a reason to not be concerned about infinite loops, but there is a resource profile in place on htmldb.oracle.com and it seems to have sniped your runaway session.
    Joel

  • How to report problems??

    Hi
    This may be a dumb question, but how do I report problems with patches?
    I can't find any place on this site.
    Just to be on topic:
    I have a problem with gethostbyname function. I have installed the latest 8_recommended patch cluster, and the problem which is claimed to be corrected is still there.
    Thanks

    Hi,
    We are facing a rather strange problem with the latest kernel patch on Solaris 9. (Generic_112233-08). We had not faced this problem with any of the other kernel patches of Solaris 9.
    Our application has a main thread and a single child thread (pthread). The main thread schedules aio_writes() on the raw disk interface and lets the child thread block on sigwaitinfo() to listen to the signal completion notification. This is communicated to it via the SI_ASYNCIO code of SIGPOLL. The child thread then informs the main thread by writing to a bi-directional pipe. Since the main thread has registered for read interest on the bi-directional pipe (via /dev/poll) it is informed of the completion of the aio_write() without having to block itself. Under normal circumstances, the child thread receives SIGPOLL with SI_ASYNCIO code.
    This application has been running fine on all the previous builds of Solaris (Generic, Generic_112233-04, Generic_112233-06) on sparc platform expect with the latest kernel patch. The child thread now keeps receiving SIGPOLL with SI_NOINFO code. There has been no change in our application and we are perplexed to the reason of this behaviour. Since it is SI_NOINFO there is not much debugging information we can get.
    We have been able to replicate this behaviour using a small stand-alone program. We are attaching it at the end of the email. We tried this program on a couple of different Sparc systems and were able to reproduce this behaviour on one of them but not on the other.
    Has anybody faced problems with regard to SIGPOLL in the latest kernel patch of Solaris 9 for sparc systems ?
    Thanks

  • AirPort Extreme (802.11n) dual band is reporting problems?

    Hi.
    I can not find an answer for my error-problem:
    AirPort Extreme (802.11n) dual band is reporting problems!
    I have an optimum on line cable modem connected to my AirPort Extreme (802.11n) dual band.
    Ethernet cables connect it 1. into my new Nehalem Mac Pro, 2. into my back-up Quicksilver PowerMac. I also have 2nd gen. iPod touch works on WiFi.
    This set-up has been working well but now I daily get the above error. Sometimes it says also: You have different locations set-up and it asks me to go through the set-up procedure. May be I did the initial set-up incorrect. I don't quite understand "locations" and it's purpose.
    Also the Airport runs very hot so I put a small fan in front of it. A few times I had to disconnect the cable mains to reset and get back my service. Please help.
    W.W.

    Walter Wedler wrote:
    AirPort Extreme (802.11n) dual band is reporting problems!
    I have an optimum on line cable modem connected to my AirPort Extreme (802.11n) dual band.
    Ethernet cables connect it 1. into my new Nehalem Mac Pro, 2. into my back-up Quicksilver PowerMac. I also have 2nd gen. iPod touch works on WiFi.
    This set-up has been working well but now I daily get the above error. Sometimes it says also: You have different locations set-up and it asks me to go through the set-up procedure. May be I did the initial set-up incorrect. I don't quite understand "locations" and it's purpose.
    Can you tell what's telling you about those locations? An Apple AirPort unit can maintain different "configurations" so that it could be used in different locations without a complete reconfiguration. However, I don't believe they're ever referred to as "locations". On the other hand, a Mac can have multiple "locations" defined in the Network panel of System Preferences. Those can be useful if the Mac is used in different places with different arrangements.
    If your AirPort Extreme is having problems the status light on the front will probably be amber. If you launch AirPort Utility and double-click on the AirPort Extreme item on the left, you should be able to see more details about the problem.

Maybe you are looking for