Y the subcontracting should be within 180 days ?

hii experts
Can some body explain me ,
1.the subcontracting must happen within the duration of 180 days.
Any particular reason fo this ..??????
Then If excisable material mean what is the process, because we are not going to do the excise duties.
2.As  normal material only we are going to proceed the excisable material also in Subcontracting .??
Then what is the major difference ??
Explain me both questions.
Thanks

legally every excisable material should go with either excise invoice or subcontraction challan
so in the case of subcontracting we are sending our material to vendor and geting some work done on it and get back the material.
so accorndong to excise law the material that we have send to subcontractor we should get it back with in 180 days.
when we send our materia to subcontractor on subcont challan there is no excise duty transfer
only we need to track the material subcontracting challan wise how much and when the material goan to subcontract and how much and when did that material came back
this report is called Anexture IV and we get this report in J1IFR
If the material is not returned with in 180 days then the excise duty credit for that material have to be receivsed.
If the material is not excisabel u dont need to creat any subcontracting challan so no need of traking 180 day.
hope this is clear

Similar Messages

  • Hi, I bought "photoshop elements 12" 8 September . Yesterday I noticed that a new version of number 13 Can I ask for free adobe I have updated to a newer version? I have heard that I have the right to do within 30 days of purchase. Do I have to first regi

    Hi, I bought "photoshop elements 12" 8 September . Yesterday I noticed that a new version of number 13 Can I ask for free adobe I have updated to a newer version? I have heard that I have the right to do within 30 days of purchase. Do I have to first register your product? greet.

    You can apply for an upgrade here: Do I qualify for a free upgrade? 

  • HT201441 I purchased 2 large bags of cell phones at a surplus/lost and found auction. The owner of this phone lost it, and didn't pick it up at the lost and found within 90 days and the phone was put up at auction. By law I am the new legal owner of the p

    I purchased 2 large bags of cell phones at a surplus/lost and found auction. The owner of this phone lost it, and didn't pick it up at the lost and found within 90 days and the phone was put up at auction. By law I am the new legal owner of the phone. The person who lost it locked their phone but didn't bother going to look for it. Not my problem. I went to the Apple store with my auction receipt and they said they still can't erase the old owner's account from the phone, and I need their receipt and their permission. There has to be some way around that. I legally purchased it after they lost it and neglected to pick it up within the time frame the law gave them to pick it up. Basically the Apple Store employee told me I was **** out of luck and the phone is basically garbage.

    You were correctly informed. You are the new, legal owner of a beautiful paper weight. There is no way around it. This is a security protection to prevent people who steal them from getting value from the stolen item.

  • I need help highlighting an expiration date on my Numbers '09 spreadsheet. I want the text/fill of a cell to change color when the expiration date of an item is within 180 days of the current date.

    I need help highlighting cells on my Numbers '09 spreadsheet.  I want the cell text/fill to change color when the date is 180 days or less from the current date.  I already have a cell with the current date in it.  I also know how to change the fill/text colors.  All the cells have been formatted to show date only.  I am having trouble with the formula.  I can get to the Conditional Formatting menu and select "With Dates" but after that I am lost.  Can anyone help?
    Thank you for any assistance.
    B

    Set a Conditional Format rule as shown in the illustration below. The rule has been applied to all dates in column B of the table.
    Regards,
    Barry

  • Scheduling orders within 180 days

    Hi, I'm setting up a working environment using CDP and block schedule.
    I have the master data set, orders are created correctly but I'm not being able to schedule orders within a period shorter than 180 days. I have tried this in block scheduled and not block scheduled resources and same thing happened in both.
    Even if I try to schedule a single order in the whole resource the same thing happens. Resource don't have shuts or things like that defined.
    I though the 180 days referred to the planning parameters set up in the resource but if I change this nothing happens.
    Any help is welcomed.
    Many thanks,
    Diego

    Hi Diego,
    Check the factory calendar assigned the time streams maintained for resources and re-generate the time stream in the resource. Also check if there is inbound resource (IBR) assigned in the location master. if IBR assigned, check and re-generate the time stream assigned to it.
    It should work.
    Regards
    Venkat DR

  • Just bought the iphone,battery dies within a day.anyway to get the apps not to run when i am not using them?

    just bought my iphone, and the battery dies within one day.  Is there anyway to get the apps not to run when i am not using them to save my battery

    Yeah. Double tap the home button and the screen will shift upwards to show all your running apps. Just press and hold one until they start 'wiggling' then press the 'no entry' like sign that appears in the top left corner of the apps. That'll close them and release the memory and resources they're taking up

  • Purchase an IPad - what if the new comes out within 60 days?

    Does any one know Apple's policy on purchases of an item just before a new one is released? In other words Is the debut of a new upgraded item grounds for returning the older one (purchased within a reasonable time frame say 60 days to purchase the new one...)

    Alancito wrote:
    Welcome to the discussions. Apple simply says this:
    "For eligible Mac, iPad, iPod, and third-party products, you have up to 14 calendar days from the time you receive your item(s) to initiate a return." (Source)
    ...Found by doing THIS.
    Wow. What a neat concept! I'm surprised that it took so long for someone to think of doing it.

  • Subcontracting challan reverse since 180 days  passed

    HI
    Error is Cannot reconcile crossed return date,please reverse
    Scenario is such
    Material is received MIGO is done after process now they want to create J1IFQ here the problem exists ,
    kindly help how to sort out the problem.

    Reverse the excise duties in J1IF13.
    Then do the reconciliation in J1IFQ
    After that recredit the excise duties & complete the challan in J1IF1
    3
    Maintain the accounts for Excise TT-57N
    Regards,
    SATPAL

  • Handling Excise for the subcontract components after 180 days

    Hi All,
    Can some one tell me the process, what we need to do if the Subcontractor does not return our components within 180 days?
    Please give the details step by step.
    Regards,
    Sattuj

    Hi Sattuj,
    If the subcontractor doesnt return the component within 180 days u need to follow following steps-
    1.TCode-j1if13.-Complete/Reversal/Recredit-  Reverse challan.
    All duties will get reversed.
    2.TCode-j1if13.-Complete/Reversal/Recredit-  Recredit challan.
    All duties will get recredited.
    3.Create GR for the purchase order and provide the reference of Challan created.
    4.Reconcile and Complete  the Challan
    5.Check RG23A part 2 entries for transaction type 57NR and 57RC in table J_1IPart2
    6.Extract RG23A Part 2 register and download the entries in excel through J2I6
    Hope this helps.
    In case of any clarification please respond back.

  • 180 days crossed for subcontracting

    Hi,
    I sent the material for subcontracting,also received the same material after the return date(ie.after 180 days).
    Now the system is showing the error 'Cannot Reconcile : Crossed Return Date, please Reverse'. I know the std process that we have to reverse it and recredit after receiving the material.
    My query is:
    1. Is there any other solution than the above?
    2. Suppose if I reverse and recredit,can I see the history for this in system.
    Please suggest the solution.
    Regards,
    Goraksh.

    Hello
    There is no other solution other than re crediting. IF recreditted it will be document in the system.
    Make sure that from next time that you make a document for receiving the material even if not received physically and provide it for subcontracting again.
    Regards
    Gregory Mathews

  • Subcontract challans after 180 days

    Hi All,
    Can some one tell me the process, what we need to do if the Subcontractor does not return our components within 180 days?
    Please give the details step by step.
    Regards,
    Sattuj

    hi,
    what exactly the excise says ______
    1) if vendor fails to return material which is excisable then u have to pay excise which u have not done earlier.due to provision of 57f4 challan.
    now how u r doing that_____
    1 u have to scrap the material which is at vendors end actualy it is ur property
    2 u have to create an excise invoice thro J1IS trasaction that means u are selling material to vendor
    3 because of this ur cenvat clearing account gets affected means nullifies with cenvat payable.
    4 again u have to pay excise duty for scrap generated.
    thats all,
    reward if useful
    sujit

  • No accounting documents generated while reversing the subcontract challan

    Dear Friends,
    Could any of you  pls clarify the following process.
    __Reversal & Recredit of subcontracting challan.__
    Step1- Created sc po
    Step2- Did 541 (mb1b)
    Step3- Created sc challan (J1IF01)
    Step4- Did the GR (Partial)
    Step5- Partial reconciliatin of challan (J1IFQ)
    When the rest of the finished products arrives , the challan exceeds 180 days.
    Now I have to reverse the challan & then have to reconcile the challan.
    After I have to take recredit & complete the challan.
    But the problem is there is no accounting document is generated after reversing the challan although the status of the challan is showing reversed. In J1IF13 the reversal base value is picked from the J1ID assessable value for the component. But the Reversal BED,Reversal ECS,Reversal TAX1 fields are blank.
    R Panda

    Hello,
    You create subcontracting challan so that you do not pay any duties when you send the components to the vendor ( Subcontractor ). So whn you cancel or reconcile ther will be no accounting entry. Material should come back within 180 days of time frame.
    Regards,
    Shailesh

  • Reversal of the subcontracting Challan

    I have the following doubts:
    1) Does the system automatically debits the modvat accounts in case the material is not sent by the subcontractor within 180 days. Do I need to enter the amounts in "Utilization Tab"?  In the subcontracting challan the duties are shown as calculated on the posting data tab.  In the utilization tab the entry for
    RG23A BED
    RG23A SED
    RG23A AED
    RG23A NCD
    is editable.
    The header is like this
    Balance for utilization          Modvat Debit
    RG23A BED                  0.00
    RG23A SED                  0.00
    RG23A AED                  0.00                         Total
    PLA   BED                  0.00                   0.00  BED                    0.00
    PLA   SED                  0.00                   0.00  AED                    0.00
    PLA   AED                  0.00                   0.00  SED                    0.00
    RG23A NCD                  0.00                         NCCD                   0.00
    Do I need to enter the values in the utilization tab to debit the modvat accounts or it will be debited as per the entries in "Posting Tab"
    2) When does the report J1IFR shows the challan under  "Recredit Due" ?
    Please help for these 2 questions I have gone through the other posts related to this topic but unable to understand the transactions for reversal/ recredit

    Hi,
    1) Does the system automatically debits the modvat accounts in case the material is not sent by the subcontractor within 180 days. Do I need to enter the amounts in "Utilization Tab"? In the subcontracting challan the duties are shown as calculated on the posting data tab. In the utilization tab the entry for
    If you send exciable material to subcontractor vendor  and you not get your material in 180 days then  what happen check following
    1) why 180 days first because as per Indian law your excise invoice valid for 180 days to take credit after that you can not take credit
    2) when 180 days complete ,then it consider as you sale your material  to vendor and you have to create sale invoice along with excise invoice and send to vendor ,system will not do automatically.
    3) while doing utilization you can not edit sales value or MM value also ,once outgoing excise invoice d yo subcontractor it will come automatically in utilization.
    Regards
    Kailas Ugale

  • Sub con Duty reversal afer 180 days

    Hi,
    We have to cancel the duties in case of time elapsed ( more then 180 days)
    Step 1 J1if13 reversed the challan now status showing as reversed
    step 2 How to reverse the moment if reversed challan duties will reversed or need to pass JV
    step 3 If material expecting to receipt in that case how to take credit agian
    J1if13 Recredit optin will allow to take the credit again or seperately in need to take credit if it is yest from which t code
    and after taking recredit system will once agin will open the challan for another 180 days or how to see the date due for reversal.
    Pl explain indetails if possible attach screen shots would be great help
    Regards

    Hi,
    hi
    1. Raw materials are sent to the subcontractor for processing into finish goods through subcontracting challan and in that no excise duty is debit to the excise and this challan includes only approximate value of goods.
    2. The subcontractor needs to send back the material within 180 days of receiving the material into subcontractor premises, in case if he fails to send the material within 180 days then the company needs to debit the CENVAT duty, the process as -
    If the allotted number of days elapses and the subcontractor has not returned some or any of the materials in the challan (status: Posted or Assigned), you must reverse the excise duty that you have credited to your CENVAT account. The scrap has to be returned by the subcontractor. If it is not returned, the excise duty for the scrap has to be reversed.
    This function sets the status to Reversed. From here, you have two options:
    u2022 If you do note expect the subcontractor to return the materials, you can complete it.
    Complete
    1.From the SAP Easy Access screen, choose Logistics u2192 Procurement u2192 Subcontracting u2192 Subcontracting Challan u2192 Complete/Reverse/Recredit.
    2. Enter the challan number and year.
    3. Choose .
    4. Select Complete challan.
    5. Save the challan.
    u2022 If you do expect the subcontractor to return at least some of the materials, you can leave it as it is for the time being. Then, when the materials arrive, you can recredit the excise duty to the account .
    Recredit
    If a subcontractor returns materials after the return date, you can recredit the excise duty credit that you have reversed.
    Recrediting the CENVAT Account
    1. From the SAP Easy Access screen, choose Logistics u2192 Procurement u2192 Subcontracting u2192
    Subcontracting Challan u2192 Complete/Reverse/Recredit.
    2. Enter the challan number and year.
    3. Choose.
    4. Select either of the following options:
    u2212 Take recredit for receipts
    This leaves the challan open for further goods receipts.
    u2212 Take recredits if any and completes challan
    This completes the challan and writes off finally any CENVAT credit that you might have been able to claim.
    5. Save the challan.
    Regards,
    Pardeep Malik

  • Challan Reconcilation after 180 days.

    Hi all,
    How to Reconcile the material document with Challans
    what is the process if the challan is not completed within 180 days.
    case -01   FG material document is posted after 180 days completion after making the challan.
    case-02     FG material document is posted within 180 days but challan is not reconciled  (or) not Completed, Can it be reconciled after 180 days completion.
    With Rgds,
    Krishna

    Hi Piyush,
    whether the challan is tobe reconciled even after Reversing or what?
    I have one more query ,
    One of my user in MIGO for a particular material document have un-checked the components @  the time of receipt of a particular FG item.  where as for the remaining FG parts  - components exist within a material document.
    but my problem is system is not allowing me to reconcile the remaining component , it is throwing warning message for the FG material for which  components are not consumed.
    With Rgds,
    Krishna.

Maybe you are looking for

  • Multiuser Shared RPD With Presentation Server

    Hi, I recelntly set up a multiuser development environment for OBI using a network-shared RPD file (windows env). Is it possible to use it with the presentation services without copying it after every change to the OracleBI\server\Repository director

  • Hi. Is it a good idea to install Lion on an ibook from 2007?

    I have an old ibook which has stopped working - the 'file' icon with a question mark appears when I turn on. A local Tech shop says the machine is still good - they think I should change the hard drive and upgrade to a new operating system - Lion or

  • Connecting IMac OS 10.9.5 to Photosmart Premium 410

    I am trying to connect a new Mac with OSX 10.9.5 to an HP Photosmart Premium c410, which is on an existing home wireless network and functions properly with other (Windows) computers in the house. I am following online instructions to enter the Apple

  • Flash problem in IE - not the usual one.

    I am new to the game here. I've created some pages that use a Flash video player. The user can click on a list of available videos (XML generated), and the video will load in the player and play. Works fine in IE and Safari on Mac. Works terrible in

  • Howto activate Intel HD Graphics on Elitebook 8560w workstation

    Hi, I got an Elitebook 8560w which own an Intel Core i7 Cpu that supports Intel Wireless Display technology. Now I want to use Intel WiDi to stream to my smart tv via miracast. But I can't do so, because only the NVidia graphics card is usable. The I