Y410 and windows 7 64bit

Since upgrading to windows 7 64bit I have a couple items that I can't seem to find drivers for. I look in my device manager and there are 3 items that are not working correctly. Two of them say Base Sysytem Device and one say Unknown Device.
Any help with these is greatly appreciated.
Thanks

Probably the card reader. Try the Vista 64 driver
for your model of laptop and type of card reader
if available.

Similar Messages

PC54G2 and windows 64bit edition

Where can i get drivers working with windows x64 ?

What drivers specifically are you looking for?
There are lots of drivers and driver links at http://www.planetamd64.com

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

Hello All,
I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer. Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
Thank you
Roy B

I have a similar problem with the J4580 and my new Windows 7 64-bit laptop. HP Solution Center says that the printer is disconnected. Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file. The printer truncated the page after printing just the top 10%. The printer is OK with my wife's Windows 7 32-bit laptop.
I've seen many other people complain about similar problems in this and other forums. Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit. Can HP please provide an updated driver or patch?

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Audigy SE and Windows 7 64bit hiccups when i listen music and open a picture

LAudigy SE and Windows 7 64bit hiccups when i listen music and open a picture' Hi,
PC September 2009 ->> MSI P35 Neo 2FR , E8400 , Audigy SE , Windows 7 64bit RC build 700 = crystal sound , no hangs or hiccups, worked flawless in any application
PC Octomber 2009 ->> AsRock P55 Pro , Core i7 860 , the same Windows 7 64bit RC build 700 and the same sound card Creative Audigy SE with the same drivers? i have problems when i liste music on any player.
Symptom = i listen to music and when i open any random picture/program the music hiccup/hangs for a milisecond.
i tried every driver on this site and every setting on the audigy control manager , nothing worked.
i tried to update de DirectX .... i can't find any cure to my problem
i need help please[img"]http://xtrempc.ro/forum/download/file.php?id=4035&mode=view" height="83[/img] width="54">
[img"]http://xtrempc.ro/forum/download/file.php?id=4034&mode=view" height="8[/img] width="53">
[size="">Sorry 4 my bad english

i tried even PCI Latency 64 and 96 ... no change

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

Audigy 2 Value and Windows 7 64bit driver don't work

my first Audigy SE before Audigy 2 Value (SB0400) worked perfect on Windows 7 64bit
with Audigy 2 Value SB0400 i tried 3 drivers , including the beta from the creative support , original and daniel_k driver and after reboot the windows hangs at LOGO and stays there.

Re: SB Audigy 2 ZS and Windows 7 - Full Package driver?T While Creative has written new drivers and some applications for Windows 7/Vista for the Audigy, they have not re-written or updated all of the original applications on the CD. This card is very old now. What Daniel K. did was take all of the applications or most of them, and tweaked them to properly install and include themselves in the registry on operating systems other than Windows XP. For the full and most recent package, check here:
http://forums.creative.com/t5/Sound-...009/td-p/53838
If the application you want is not included in his package, then you can try downloading the official Creative version and install it on your system in "compatibility mode" by right clicking the file, and choosing properties, and then the compatibility tab and choosing "Windows XP service pack 2 or 3" and it may or may not function.

Microphone , Audigy Se and Windows 7 64bit

*Microphone , Audigy Se and Windows 7 64bit's I have wasted several hours today trying to resolve this issue upto and including trawling the internet for a solution and completely removing and reinstalling drivers from disc and updating twice. Ultimately I downloaded an update from WIndows - Absolutely nothing, nada works!
I have the Mic Jack for my headphones plugged into the blue line in port - tried and tested on my system card (which works) but I consistently get Line--in Currently Unavailablke for this port suggesting that Creative are totally out to lunch on this one.
I have right-clicked and set levels, tried setting it as default, etc, etc, etc... nothing.
Has anyone succesfully got their mic to work uunder Win 7 64bit's
- Love how it says on the box that Vista nad WIn 7 are supported,,,? guess the partially bit was omitted!
I loathe wondows on any given day of the week but my Mac is currently down so I have no choice but to use this, my wifes machine... NOthiong but lost time whereas if I were on the mac I would be using that time producti'vely, with working software too I might add!
Hope someone has a fix for this because this machine is just one reboot away from going out the frogging window!!!

'sHi,
Are you using this driver? Are you getting no sound from your microphone or is nothing being recorded?
Please go to Control Panel, Sound make sure that the Microphone option is set as default and that the mic levels are adjusted accordingly, not mute.
If this is not working for you, Customer Support can be contacted using this http://support.creative.com/Downloads/searchdownloads.aspx?filename=

Install only 32bit version of AX Flash Player for IE8 and Windows 7 64bit

Hi,
For several reasons I would like to install only the 32bit version of Flash Player AX for IE 8 and Windows 7 64bit.
It was possible to do it when the installers where separated but I see no information how to do that now.
It is very convenient for me to have my 64 bit IE 8 browser without Flash that I use to browse and not get annoyed by the flash on the web and use the 32bit IE 8 on youtube, vimeo, etc when flash is necessary.
I hope the option to choose which version to install will get back if it is not possible now.
Please let me know if such kind of request should be made somewhere else as new feature or whatever.
Thank you.

That was the first thing I tried. It either works on both or disables on both versions. Something is messed with the settings as well, or has been made that way on purpose. Also the next thing I tried was to uninstall only the part residing in System 32 (leaving the one in SysWOW64) but the result was both not working after the uninstall. It remained in Programs but wasn't working anymore in both versions of IE 8. So I just put back the latest 32bit version which is not security wise..

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2?

Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2? Earlier when checking for updates there were compatibility issues. Were these issues resolved to allow me secure operation with Firefox 4.0?

I also am a zone alarm user and was not to happy about the issue with 4.0
I use sky .fm for music and was not happy when it would not play. required update to latest flash,which didn't work no matter what. even the suggestion in another thread.

GUI of Minefield for Windows 64bit (4.0b13pre and earlier) is "corrupted"

The GUI of the Windows 64bit version of Minefield (4.2a1pre, 4.0b13pre and earlier) is somehow corrupted. The tabs and the address bar contain vertical left-out spaces as well as other parts. The browser itself works pretty good.

Yes. The GUI irritations have gone after applying the recent update 4.2a1pre (2001-04-12). Many thanks to the community!
PS: after applying the update of 2011-04-14 the version number has changed from 4.2a1pre to 6.0a1. What does this mean exactly? Won't there be a released Firefox 4-x64 version anymore but instead this is already an alpha for a future release?

HELP! windows 64bit upgrade & rescue and restore option

I recently bought a W510 with Windows 7 Prof 32bit. Then, I used a seperate Windows 7 Prof 64bit to boot from the disc and installed 64bit Windows 7. My questions are,
Is there a way to save an image of my current setting of 64bit Windows at the Q partition?(which strangely have changed its name to D partition after 64bit was installed.)
What is the best way to save the current image if hidden partition can not be used? (I want to be able to format and install my windows every now and then without going through the hassel)
Should I delete Q partition is it is no longer needed? (if it can only restore to 32bit and if I no longer plan to use 32bit?)
Thank you in advance for your reply!

if you plan no longer to use recovery system and 32 bit operation system, you can delete the hidden partition.
as i read somewhere in the forum, you can update hidden partition.
but let me ask you this, after installation 64 bit, hidden partition became visible?

I have installed the patch for output. it still doesn't work i am running windows 8.1 i have tryed the 32bit patch and the 64bit patch it still will not show up in workspace.

I am running Windows 8.1 i have installed the 32bit patch and the 64bit patch and neither one works. there is nothing in the workspace folder to delete. HELP!!! college student and campus running mac computers.

I am having the exact same problem and have tried everyone thing it is driving me crazy if you hear of anything that works let me know i would be very grateful.

Y410 and windows 7 64bit

Similar Messages

Maybe you are looking for