Y410p Cannot install Intel Rapid Start Technology

Hi Guys, I have a Y410p and I have replaced the HDD with a SSD on windows 8. Before changed to SSD, i did not try to install the intel rapid start and thus I never know if it could work before. I re-install Windows 8 on the SSD and also installed Intel Rapid Storage Technology driver. When I install the Intel Rapid Start, I got this error: "this computer does not meet the minimum requirements for installing this software" I have checked the BIOS, I cannot see any relevant settings and I just make sure AHCI enabled. I have done the parition (on the GPT) using the set ID = D3BFE2DE-3DAF-11DF-BA40-E3A556D89593 I have followed this guide (UEFI)http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide_for_uefi1.pdf Is it Y410P cannot have the Intel Rapid Start installed because of the chipset or the BIOS? Do I miss anything? Please help. Thanks in advance.

Never found a way to fix it. Me and my friends are pretty proficient with computers too. Just been shutting down my computer every time I'm done using it. Lenovo said we can send it to them and they'll take a look or replace under warranty

Similar Messages

Intel Rapid Start Technology does not appear to be installed

How do I get rid of this message?
It's an HP Envy dv7 Notebook, D0X38EA#ABU
I haven't upgraded any part of the hardware - it's configured as it came out of the box. It's running Win 8.1
I have looked through the forum and downloaded manuals and it all gets extremely technical very quickly. So I downloaded a driver from intel and it says "This computer does not meet the minimum requirements for installing the software".
I am just a simple user. I can guess that the Intel thing will make the computer boot faster. That would be nice but I'm not qualified to start faffing around in the BIOS. Nor do I want to be.
Please just tell me how to make the message go away. It's annoying.
This question was solved.
View Solution.

Hello @Gatasblancas,
Welcome to the HP support Forums. I completely understand your issue and your reluctance to go into the BIOS. If you dont feel comfortable doing it then by all means stay out. Thank you for providing your system information as well. Now there is only one way of dealing with this and it does require going into the BIOS. Here is a link that can walk you through the steps needed.
Intel Rapid Start Technology.
Now you may have not upgraded or changed anything it may have been caused by an update that ran automaticaly.
If you can not work through this with the link I posted for you. I would contact phone support to walk you through this.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
Phone support by Region.
I hope this helps.
Thank you for posting.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

How to use Intel Rapid Start technology on my ThinkPad Edge 531 computer?

I have a Thinkpad Edge 531 (model 6885-73G) preloaded with Windows 7 64bit. According to the appropriate user guide (see Thinkpad E531 User Guide - page 108) and chipset specifications Mobile Intel® HM77 Express this ThinkPad model supports Intel Rapid Start Technology with a special partition on the SSD M.2.Such an SSD with the specification M.2 (see MyDigitalSSD Super Cache 2) I bought it and installed successfully on my ThinkPad, which can run a cache software FNet HybriDisk on.
However, even if I proceed exactly according to the installation script by Intel, see (Intel Rapid Start Technology User Guide) or by the installation script by Lenovo community, (see Edge E330 and Intel Rapid Start), I can not put into operation Intel Rapid Start Technology on my ThinkPad, although I use the installed SSD disk with an alone partition of appropriate type (with ID type 84 on MBR) with more allocated space than the size of RAM for my ThinkPad and with the currently deployed version of BIOS (1.29) and current drivers, such is Intel (R) Rapid Storage Technology Driver version 11.1.5.1001 downloaded from the webiste of Lenovo support for this model ThinkPad Edge 531.
Since, in my opinion, based on the above specifications declared by the manufacturer Lenovo and Intel, this ThinkPad model should support Intel Rapid Start Technology, I would like therefore to know how this technology on my ThinkPad to put into operation, because of which I also bought this ThinkPad model. Does exist for this model ThinkPad Edge 531 some specific deployment scenario of Intel Rapid Start Technology? Does anyone have any practical experience with the launch of this technology on those ThinkPad models? Can it be expected that the full support of Intel Rapid Start Technology for the ThinkPad Edge 531 will occur after the release of a new version of the BIOS or a new version of Solid State Drive Firmware Update Utility with support for MyDigitalSSD Super Cache 2 published on the website of Lenovo support?
Thanks in advance for any advice and guidance with the launch of Intel Rapid Start Technology on my ThinkPad Edge 531.

Hi @nmulji ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY TouchSmart 15t-j000 Notebook and issues with Raid technology. Here is a link that helps with the driver for your Notebook.
You might need this update for software and drivers with the Intel Management Engine Interface.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. If something is not updated this could be causing an issue.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Yoga 13 Intel Rapid Start technology

Hi,
I've just got a Yoga 13 and on every time that I'm turn it on I'm getting an ERROR
"Your system does not appear to have Intel rapid start technology enable"
1.i didn't see a "Intel rapid start" in the bios
2. I've update my bios
3. When I've try reinstall the driver I got this error "this computer does not meet the min requirements for installing the software"
I need help.
tnx.
Solved!
Go to Solution.

hi O_hei,
If you're running on the 66cn52ww BIOS or above, I'm afraid the BIOS is limitting you from enabling the Intel Rapid Start Technology feature. For now, try to uninstall the Intel Rapid Start Technology under Control Panel (large icon view) > Programs and Features to get rid of the "Your system does not appear to have Intel rapid start technology enable" error on startup.
Upon checking, the Yoga 13 here in the lab runs on the 66cn51ww BIOS and has the Intel Rapid Start Technology feature.
Spoiler (Highlight to read)
I recommend you visit the lenovo website once an updated BIOS is released that enable this feature.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Intel Rapid Start Technology - Error Message upon start-up

I have a fairly new Lenovo U310 that has been nothing but problems since I purchased it. Recently, it has been taking a long time to start up and when it finally hits the desktop, an error message pops up that says "Your system does not appear to have Intel Rapid Start Technology enabled." I hit 'OK' but there's not apparent way to fix this problem. I've tried downloading the IRST drivers from Intel, but trying to install them give me the error message saying that my system can't support the item. Help?

I'm afraid I don't know the layout of the BIOS options on Ideapads, only on Thinkpads - with the latter it is on something like the third screen of options and it is clearly labelled as Intel RapidStart.

U410 Intel Rapid Start Technology Driver - failure

For about the last two weeks (for some unknown reason) Intel Rapid Start Technology is unable to start on my U410 Laptop. I attempted to reinstall the driver from the Lenovo page, but when I get to the install point I get a message stating my device does not meet the minimum specifications for this technology!
It's making start ups and logging on a major drag
Has anyone experienced this before? Any help would be appreciated.
Thank you,
Rory

Never found a way to fix it. Me and my friends are pretty proficient with computers too. Just been shutting down my computer every time I'm done using it. Lenovo said we can send it to them and they'll take a look or replace under warranty

Lenovo IdeaPad U310 Intel Rapid Start Technology with WIndows 7 Ultimate

Hello,
I have upgraded my Windows 7 Home Premium to Ultimate. Got it in my domain and everything seems normal . But I wanted to check the options of that energy saving settings and can't find any information about, when does my computer go to hibernate. He does use the stand by, but for how long? Until the battery is low? That makes no sense.
The computer must go in hibernate or is this with ultrabooks going other ways?

Hi
I have further investigated and found a solution for hibernation
In order to enable hibernate in Lenovo Machines SSD support models, you will need to restart and Enter into the BIOS Setting
1. Press Fn+ F2 to enter BIOS
2. Choose "Configuration > SATA controller working mode" as "RAID";
3. Select "Configuration>Intel Rapid Start Technology", choose " iRST Support" and "Entry on S3 critical battery event" as "Disable";
. It will then automatically return to an available Windows power options setting. However, iRST (Intel Rapid Start Technology) does not have the ability to wake a system from hibernate.
Now restart the system and you will find hibernation option is enabled under power option
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Intel Rapid Start Technology | MSI Z87-G45 Gaming Motherboard

Are there any users at all that have Intel Rapid Start Technology fully functional; if so can those share their experiences?

Quote from: dude on 16-March-14, 22:27:39
I use it because I have a Crucial M4 SSD. It performs better with the intel
I was referring to intel rapid Storage Technology. I will drink more coffee before posting again
Finished with that cooffee
Iam also having thoughts about this, any information would be great.
Note! Iam not having problems but are curious about it.

Can't install Intel Rapid Storage Technology driver on Yoga 2 11

The Lenovo driver list for the Yoga 2 11 includes Intel Rapid Storage Technology (IRST) Driver for 64-bit Windows. However, attempting to install this results in the message, "No Appropriate Driver to be Installed". Likewise, attempting to install the Rapid Storage Technology driver from Intel's site results in the error, "The platform is not supported."
Windows Device Manager shows WDC WD5000M22K-24Z1LT0-SSHD-16GB for the disk drive name, so it appears that the drive should support the RAID configuration for SSD caching. This is consistent with the specs for the laptop.
Is it normal for the drivers to not install? It seems odd, given the placement on Lenovo's driver list. I'd like to set the Acceleration Mode to Maximized as described in Intel's User Guide.

Hi Jakobsjoqvist,
Welcome to Lenovo Community Forums!
I’m really sorry to hear that you had trouble installing Intel Rapid Storage AHCI driver in your Lenovo Thinkpad T430s.
I would suggest you to try uninstalling the driver and run the Intel Driver update utility which will auto-detect the missing drivers and will install the latest version for you.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

U510 won't boot after installing Intel Rapid Storage Technology

I recently had to reinstall Windows 7 on my U510 after some virus/malware destroyed the boot record. After doing so I attempt to install the Intel Rapid Storage Technology and after rebooting Windows launches its repair functionality. It runs for several minutes and is unable to repair and I can't get to the OS. Any ideas? I've subsequently re-installed Windows 7 and have not attempted another install of that software. Isn't this software necessary to take advantage of the SSD and swapping between the HDD and SDD? Thanks in advance!

Take a look at this thread.
https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/How-can-I-enable-U530-to-have-Intel-Rapid-...
IRST only manages storage. You will need the software mentioned in that thread in post 2, but just check since that thread is for U530.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Your system does not appear to have intel rapid start technology

I have a Lenovo U310 with windows 8 and wish I could take it back. Problem after problem with this computer, both hardware and software related. I started getting this message about the Intel rapid start a couple of days ago. I went into this forum and one of the specilists suggested going into BIOS and change the SATA controller working mode to RAID and to enable IRST which I did. Now the computer can not start. It tries to load and it says that the recovery system failed. I can get to the BIOS menu again but I wont let me get to configuration screen. Any help would be much appreciated. thanks
Solved!
Go to Solution.

hi yzarate,
I'm sorry to hear what happened,
If the system is giving you a failed to start Option, Restarting it May sometime give you option Like Safe mode,
If you're getting that, select that option and it should be able to start you system while in RAID then restart the system again once booted back up.
If you're not getting that message I would suggest go back to BIOS
go to the Exit TAB, Select Load optimized default or press F9 to load defaults, F10 to save and Exit and hit enter,
Try loading BIOS again and see if the configuration tab will be available,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lenovo S400 error in installing Rapid start technology

I recently installed windows 8 on my laptop all drivers were installed perfectly except Intel Rapid Start Technology, on installing it is showing that your system doesn't meet the minimum requirement. Also the action center is showing install driver for power management and card reader which I have already installed but still it is continuously showing this message.

hi madhurgandhi,
Welcome to the Forums.
Installing the Intel Rapid Start Technology requires an Intel Rapid Start feature in the BIOS. Upon looking, this is not included in the S400's BIOS so this software will not work.
As for the power management and card reader notifications, are these the drivers that you installed?
Realtek Card Reader Driver
Version: 6.2.9200.39044
Windows 8 (32-bit, 64-bit)
Lenovo Energy Management
Version: 8.0.2.3
Windows 8 (32-bit, 64-bit)
AFAIK, If the card reader and the energy management softwares are both instaled and working without any errors, you should be fine.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

(Re)activate Intel Rapid start technolgy (RST) & RAID @U310

Dear community,
I have been frustrated about this for long time. Got U310 with win8(24GB SSD+500GB HDD).
People says I should set RAID in BIOS. But I got only error and cannot do recovery. So I set back to ACHI mode and system restored. Then error: "Your system does not apear to have Intel Rapid Start technology enabled".
- Yes, I have tried to set BIOS ACHI to RAID, no start.
- SSD 24GB is in device manager, not paritioned.
- intel RAID software installed
- So the point is: I have to activate in BIOS ACHI to RAID, but then Pc will not start.
So whats is the problem?
Now the partitions looks as this:
Could anyone help me, how to reactivate the RAID/ fast caching technolgy of RST?
Another frustration is: how to backup my system(win8) to USB media, so that I could restore factory state?
appreciate any advices, thanks in advance!
Signature on work
Solved!
Go to Solution.

Hi, bradlutz1
thanks for your reply! How do you identify it is defective? You have now a RAID enabled U310 or U410?
My SSD HD can be manually partitioned and use as a normal R/W HDD. Just it cannot set to RAID I think, which should be set to before install windows 8. checking into BIOS, the Intel Rapid Storage technolgy (iRST) is enabled. But I still have problem( see screenshot): How does it look like for yours?
On the other side, I use windows 8 recovery programm created a USB drive as recovery media. I want to use it to reset /recovery my PC to factory default with RAID eanbale.
First I set BOIS to RAID. Boot from HDD, but still failed, it says (I think AHCI could go thru):
Seeing from the partition picture in my first post, I think the last 20G partition is Lenovo recovery, but how to backup it and restore?
Very annoying also, the Lenovo program OneKey Recovery program 8.0(for win8) gives no option to create factory DVD/USB media, while its ver. 7 did:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT051300
http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT071791
BTW: my PC starts within 30s to login screen (w/o iRST), is it OK?
Signature on work

[Z77A-GD65] Intel Rapid Storage Technology 11.5.0.1207

Hi,
I've been updating some drivers today on a new build (in sig. below) with W8RP following the recent release of new drivers.
Updated drivers to latest for Chipset, VGA, Intel Management Engine, but when I get to RST I get the following error;
'This computer does not meet the minimum requirements for installing the software.'
I've rebooted after each driver update.
This also happened to me a few days ago on a previous OS install on this machine, but on that occasion the version on the supplied DVD with the MB was the same version number and worked fine, of course this is now out of date.
I have my SATA controller set to RAID and I see my drives in the RAID ROM prior to POST but as yet no RAID ARRAY set up, but last time I did this, that was done when following the prompts when starting RST the first time.
I'm trying to use my SSD to accelerate my HDD but not sure why I get the above error message :-s

Hi xmad,
Thanks for that, somehow some confusion had crept into proceedings and I was trying to use the Rapid Start package which is now no surprise why it was complaining at me because I don't have that switched on in bios at the moment.
The link you supplied is right, I had that already but somehow had got it confused with the Rapid Start one. It also has the floppy file set for supplying during OS install which is not separately highlighted on the downloads page like it is for the earlier version. Extracted and tested the setup file in the package you linked to 'intel_rst8_mb' which completes setup now.
I've taken my driver / utility load sequencing from Live Update 5 History Tab prior to me uninstalling it.
THX TruStudio PRO - 1.04.02
Video Genie - 1.0.0.12
Super Charger - 1.2.012
Easy Viewer - 1.3.0.9
Click Bios II - 1.0.082
Control Center - 2.2.097
Audio Genie 1.0.3.0
Realtek HD Audio Drivers - 6.0.1.6657
Intel Chipset (INF) - 9.3.0.1021
Intel Network Drivers - 11.15.12.0
Intel ME Driver - 8.1.0.1248
Intel SVGA Driver - 9.17.10.2817
Intel Rapid Storage Technology - 11.5.0.1207
Either not needed at the moment or undecided on:
OTP Service - 1.0.004
Lucid Virtu MVP - 2.1.115
Intel Rapid Start Technology - 2.1.0.1002
Intel Smart Connect Technology - 3.0.30.1526
Asmedia SATA - 1.3.4.000
? Intel USB3 - 1.0.4.225
I had problems when trying to install USB3 driver (W7 x64) on prior install of W8RP because it complained at me for not having appropriate hardware so maybe it is already catered for in W8 but I don't have any USB3 devices to test and can't see any reference to USB3 in Device Manager. I guess it depends whether W8 includes the Intel driver :s
Going to redo my OS install so I can satisfy myself that I've got a good clean install to make a drive image from.

9470m Intel Rapid Start, Intel Rapid Storage. Is it working?

When we image our Elitebook Folio 9470m SSD notebooks with Windows 7, part of the imaging process is to install Intel Rapid Storage and Rapid Start on all these notebooks. We download the drivers from the support.hp.com driver download page for Windows 7 Profession 64-bit.
The software/drivers installs successfully with no errors, but as far as I can tell, the laptops are not booting or shutting down faster than other model laptops with SSDs that do not have this software installed. May even be slower, because it seems like the Rapid Start Technology is hanging and delaying the the shut down process when we shut down the laptops.
We have verbose status messages enabled, so when shutting down the laptops, we often see a message saying something that roughly says in other words "waiting for Intel Rapid Start Technology to shut down."
What is installing this software really accomplishing and is it effective on SSD disks and disks that have full disk encryption installed?
How can I tell if this software is doing the job it is supposed to be doing or maybe we should stop installing it on our notebooks all together?

Are these using regular 2.5 inch SSDs or mSATA mSSDs? I suspect the issue is with Intel Rapid Start. That is solely for the purpose of hibernating and recovering from hibernation faster. It really serves no other purpose and works optimally with an mSATA cache drive (which your model does not have) but does improve resume from sleep on any SSD. Intel Rapid Storage enables native command queing but that is in place anyway if the storage controller is set to ahci. I would also suspect that if your drives are encrypted fully, then Intel Rapid Start is having a problem trying to write startup information to the drive and that accounts for the hang at shutdown. Do you configure the laptops to use hibernation?
I would get two otherwise identical machines and configure one with and one without Intel Rapid Start and see if you notice any difference in bootup and shutdown time. Even on those where you have already installed Rapid Start, it can be turned off in the BIOS, thus disabling it. Personally I do not use hibernation so I do not enable Rapid Start in the BIOS and do not install the software. Rapid Storage should not cause a problem.

Y410p Cannot install Intel Rapid Start Technology

Similar Messages

Maybe you are looking for