Y470 driver Windows 8 Problems

- I can't install audio driver for windows 8 64 bit
- I can't use adjust fan function

hi Chase23,
Can you try the following:
1. Install the latest ATI drivers and adjust the brightness and contrast using ATI’s Catalyst Control Center. If this doesn't work, can you try to immediately press Fn+Up Arrow to increase the brightness before the unit boots into Windows 8.
2. The One Key Recovery button and the OKR feature will no longer work if you upgrade from Windows 7 to Windows 8 - see this Windows 8 Upgrade Guide by Lenovo
If you're thinking of restoring back to Windows 7 but the OKR button doesn't work and you didn't create a recovery disc using this method then you will need to contact lenovo on how to obtain a copy of the recovery disc.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

New hard drive and problems with sync

My problem is that I have installed a new hard drive (Win 7) which I installed itunes on and I cannot sync my ipod. I still have my old hard drive (windows XP) with the original itunes on it and I have tried to back it up but it still wont do it.
I can boot to XP and perform a back up but re-booting to Win7 and trying to restore it dosent work and I still get the syncing issue. I find the suggestion to erase my ipod and reinstall my music, a ridiculous solution and I'm guessing there is an "easy button" somewhere?
help!

I probably should have mentioned this twist. My music is on a seperate drive. So what I have is Win7 on SSD1, WinXP on 2nd drive and media on a 3rd drive.
I backed up my media on both OS's and they seem to conflict with or do not recognize each other. Installing all my music on my SSD along with my Win7 is not an option (too small).
thanks

ITunes Doesn't Open but the K Drive Window Does

Hey,
I was grounded and my iPod was taken form me for about a month or so. Before that everything was fine. But, when I got it back I had to Restore it buy that wasn't really a problem. The thing I am now having trouble with is that when I plug my iPod into the computer the iTunes software doesn't open, but the K drive window does. Which is the drive my iPod is labeled under in "My Computer". Does anyone know the answer to thins question help would really be appreciated.
Thanks,
David

Hey,
I just forgot to say because I know it will come up that yes i cann see my Ipod when I open up iTunes. It ios jsut that the wrong thing is now being opend up and ti is sort of annoying.

WLAN Driver XP Problem on HP Mini 110 3504TU

Dear all,
I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU
"Network Controller?"
Hardware ID:
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C&REV_01
PCI\VEN_14E4&DEV_4727&SUBSYS_1483103C
PCI\VEN_14E4&DEV_4727&CC_028000
PCI\VEN_14E4&DEV_4727&CC_0280
Product Number : XV876PA#UUF
SN : {Personal Information Removed}
My googling results : wlan chipset is Broadcom. I have tried ALL of my search result links (Official HP's Driver Link) on google but just get nothing,
I've tried anyways to install All of Downloaded Drivers Files (my googling's search)
in Normal Setup Sequence and Manual way, via "Update Driver" Menu on Device Manager
but No anymatches found.
Thanks in Advance before...
Regards,
Dave. N
This question was solved.
View Solution.

Hi Paul Tikkanen,
Yes!, your suggested driver is work!
I very appreciate for your help response.. *shakehand*
*Special Big Thanks,
Best Regards,
Dave. N

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

I just had to install a new hard drive, windows 7,itunes and outlooks 2010 on laptop and want to import contacts, calendars and photos. it seems sync wants to wipe out my phone with whats on the computer unidirectionally. whats the fix?

Hi guys newbie here. My HP laptop crashed and i had to install a new hard drive, windows 7, outlook, itunes, etc. i need to get my contacts, calendars and photos off the phone and into Outlook and My Pictures. Syncing seems unidirectional PC -> iphone and i think wants to wipe out the iphone 4s with whats on the laptop - which is nothing. Need help to do this right...

-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem

Dear Friends,
We are giving print from Citrix. BUt the print iis giving me following problem.
Please suggest on the same.
(6:14:29 PM) Number of processors: 2
(6:14:29 PM) Icon DLL loaded.
(6:14:29 PM)
(6:14:29 PM) Network Communication via SAP-NiLib
(6:14:29 PM) Hostname: THMUMGDCCTX02
(6:14:29 PM) IP Address: 16348016.2673954.2011564330.1225156
(6:14:29 PM)
(6:14:29 PM) SAPLPD Version 6.29 for Windows/NT (OPT) is listening
(6:14:29 PM) OS-Info: version = 5.2, build = 0/3790, text = Service Pack 2
(6:14:29 PM) Copyright © 1992-2001 SAP AG
(6:14:29 PM)
(6:14:39 PM)
(6:14:39 PM) Receive job for printer BKC_7thFlr_HPColor3800 on THMUMGDCPS01 (from BKCDT (Berkeley LPD protocol / RFC1179)
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:39 PM) send_status called
(6:14:40 PM) send_status called
(6:14:40 PM) Job 000001723200001.PRD for user ATINJ queued.
(6:14:40 PM) Start printing job 000001723200001.PRD on printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT
(6:14:40 PM) Error: Cannot create Printer Context, text = Overlapped I/O operation is in progress.
(6:14:40 PM) Error: The printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT is unknown to Windows Print Manager.
(6:14:40 PM) The following printers are currently defined:
(6:14:40 PM) Printer = BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT1017) IN SESSION 11
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Printer = MICROSOFT XPS DOCUMENT WRITER (FROM BKCDT1017) IN SESSION 11
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Printer = MICROSOFT OFFICE DOCUMENT IMAGE WRITER
(6:14:40 PM) Warning: Printer name contains spaces.
(6:14:40 PM) Please rename printer, before using it from R/3 or UNIX!
(6:14:40 PM) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
regards
Jiggi

Hi,
You are getting the error because the printer name is greater than 40 characters.
The SAPLPD can only recognize printer names with 40 characters or less.
From the log, i believe you are using the printer BKC_7THFLR_HPCOLOR3800 ON THMUMGDCPS01 (FROM BKCDT1017) IN SESSION 11
but the SAPLPD is recognizing only till BKC_7thFlr_HPColor3800 on THMUMGDCPS01.
Try to change the printer name .. it will work

USB camera not showing up in drive window.

My USB connected Casio camera doesn't show up in the drive window. I had a power failure with it connected and now it doesn't show up. I can see it in the About this mac window and I have tried ejecting it with the utility. It does show up and is ejected with the utility. But doesn't show up in IPhoto 6.

Hi again Kim,
Image capture is not a preference in itself.
Image Capture is a small application in your Applications folder (at least it should be there if using 10.3.9 I believe).
Perhaps, if not there, try looking in the Utilities folder for it.
Let us know if you still cannot find it.
littleshoulders [:-)

Error: BG: printfile failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll

(12:58:18 PM) Number of processors: 4
(12:58:18 PM) Icon DLL loaded.
(12:58:18 PM)
(12:58:18 PM) Network Communication via SAP-NiLib
(12:58:18 PM) Hostname: WLRERW092
(12:58:18 PM) IP Address: 33405096.2097184.8388736.1616984
(12:58:18 PM)
(12:58:18 PM) SAPLPD Version 6.28 for Windows/NT (OPT) is listening
(12:58:18 PM) OS-Info: version = 6.1, build = 0/7601, text = Service Pack 1
(12:58:18 PM) Copyright © 1992-2001 SAP AG
(12:58:18 PM)
(12:58:29 PM)
(12:58:29 PM) Receive job for printer \\192.168.207.56\ULR_ZM400_HFW05 (Berkeley LPD protocol / RFC1179)
(12:58:29 PM) send_status called
(12:58:29 PM) send_status called
(12:58:31 PM) send_status called
(12:58:31 PM) send_status called
(12:58:32 PM) send_status called
(12:58:33 PM) Job 000NJJ3Z.WBP for user LR70343 queued.
(12:58:33 PM) Job 000NJJ3Z.WBP (raw) started on printer \\192.168.207.56\ULR_ZM400_HFW05
(12:58:46 PM) Error: The printer \\192.168.207.56\ULR_ZM400_HFW05 is unknown to Windows Print Manager.
(12:58:46 PM) The following printers are currently defined:
(12:58:46 PM) Printer = SEND TO ONENOTE 2010
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = PDF COMPLETE
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = MICROSOFT XPS DOCUMENT WRITER
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = HP EPRINT
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = FAX
(12:58:46 PM) Printer = ADOBE PDF
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:46 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:46 PM) Printer = \\192.168.207.21\SHARP MX-4111N PCL6
(12:58:46 PM) Warning: Printer name contains spaces.
(12:58:47 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:47 PM) Printer = \\192.168.208.21\SHARP MX-4111N WELSPUN 2
(12:58:47 PM) Warning: Printer name contains spaces.
(12:58:47 PM) Please rename printer, before using it from R/3 or UNIX!
(12:58:47 PM) Printer = \\192.168.207.21\ULR_ZM400_HFW05
(12:58:47 PM) Printer = \\192.168.207.21\ULR_ZM400_HFW06
(12:58:47 PM) Cannot do OpenPrinter \\192.168.207.56\ULR_ZM400_HFW05. Text = The operation completed successfully.(12:58:47 PM) Error: BG: printfile failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
please help
Regards
selvakumar

Apparently our Sandbox system didn't have a Spool server configured. That's why the error. It works perfectly in other systems.
The output device's Host Printer must be defined on the spool server for saplpd to recognize. Otherwise you see an error.

Have renewed my ExportPDF Subscription, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)

Have renewed my ExportPDF Subscription, have the confirmation email, but still pop's up with "Your trail has expired" window when go to convert via Print driver window. Comments/ help welcome thanks :-)

Hi azza675,
ExportPDF converts PDF files to Word and Excel formats (and several others). What you describe, sounds like you're trying to convert a file *to* PDF. Did you ever start a trial of Acrobat, perhaps? (Whereas you can create PDFs with Acrobat, ExportPDF doesn't let you convert files to PDF.)
What happens when you log in directly to ExportPDF at https://cloud.acrobat.com/exportpdf?
Best,
Sara

Nested Window Problem

Hopefully someone out there can help solve this one.
How do you get a child window to automatically resize within a parent
window?
On their own both the child window and the parent window behave as
expected but once we attempt to load the child window into the parent
window the child window is sized to some unknown but excessively large
size.
Can this be solved with some creative use of parent size relationships
or do we have to programmatically size the child window?
Any help/comments/suggestions would be greatly appreciated.
Sincerely,
Sean G. Germain

Glen,
Thank you for the prompt reply.
We have already done what you suggested (My explanation was not very
clear ... sorry) to no avail.
Any more takers and/or ideas anyone?
Thanks,
Sean
-----Original Message-----
From: Glen A. Whitbeck [SMTP:[email protected]]
Sent: Monday, January 26, 1998 2:47 PM
To: GERMAIN Sean
Cc: 'Forte Users Group'
Subject: Re: Nested Window Problem
You may need to dynamically tell the child window what its parent is (such
as a named grid that exists on the parent window). Setting the child
window to size to its parent should work once the child window knows who
its parent is. You should be able to put your window into that grid at
specified row and column coordinates. To reset the parent and position a
widget in a grid, you do something like the following:
<Widget>.Parent = NIL;
<Widget>.Row = 1;
<Widget>.Column = 1;
<Widget>.Parent = <TargetGrid>;
I believe that you should be able to do the same thing for a window, too
(using "Self.Window" instead of "<Widget>").
Glen
GERMAIN Sean wrote:
Hopefully someone out there can help solve this one.
How do you get a child window to automatically resize within a parent
window?
On their own both the child window and the parent window behave as
expected but once we attempt to load the child window into the parent
window the child window is sized to some unknown but excessively large
size.
Can this be solved with some creative use of parent size relationships
or do we have to programmatically size the child window?
Any help/comments/suggestions would be greatly appreciated.
Sincerely,
Sean G. Germain<< File: vcard.vcf >>

I can't download driver windows 7 why ?

I have iMac 2011 Bootcamp version 4.0.3(435) HDD 500 GB RAM 12GB I need download driver windows 7 in bootcamp system show not connecting to internet
I connect all time
why not ?

Boot in Safe Mode and try again.
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Advanced Network: Proxy Settings, I uncheck "Auto Proxy detection" and make sure you have the interface you use selected and none others.
"Go into System Preferences - Network - Advanced - Proxies Uncheck "Auto Proxy Discovery", click OK, Apply"
After Unchecking "Auto Proxy Discovery" I also had to Uncheck "Use Passive FTP Mode (PASV)" and then Restart Boot Camp Assistant.
odiggy's comment and tried restarting Boot Camp Assistant. That did the trick, even though the Auto Proxy Discovery checkbox ended up the same as it started. Windows support software is now downloading... if you're downloading to an external drive make sure there's a least 1 GB of free space because the WindowsSupport folder is around 700 MB and presumably will grow with time.
https://discussions.apple.com/thread/3223773?start=15
Also, Change Domain Name Servers to OpenDNS IP address servers - that should be at the router firewall rather than the OS but may be in both for some people. You may be using the defaults your ISP uses, save those if you want, and try these:
208.67.222.222
208.67.220.220
Make sure you are not using LittleSnitch or Symantec (probably other 3rd party firewall)

CF 10 getting random resets : Detail: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset).

These resets appear to coincide with a clearing of the cached queries for the DSN from memory, breaking all my sub queries that try to use the initial cached one. I am grasping at straws to discover the reset culprit, the DSN tests always show OK, there is not packet loss at the switch level. If anyone has some suggestions, I am all ears!
The resets are completely random and under no load. My sql 2008 r2 box is set to unlimited connections.
An example of a DSN setup is :
Maintain Connections [x]
String Format [ ]
Max Pooled Statements 100
Timeout 20 Interval 7
Query Timeout 0
Login Timeout 30
CLOB [ ]
BLOB [ ]
Long Text Buffer 64000
Blob Buffer 64000
Validate Connection [ ]
I am running the following :
CF Enterprise 10,0,13,287689
Tomcat 7.0.23.0
Ubuntu 1204 x64
Java VM 20.4-b02
Java 1.6 (Sun Microsystems Inc)
I have seen it suggested to uncheck the maintain connections advanced options but this doesn't seem like a good approach to the problem and will cause more stress on the sql box IMHO.
I have also seen it suggested to enable Validate Connection but documentation on this is a bit sparse...
Here are more examples of the initial reset error and then the subsequent cache related errors :
Database Error Information:
Native Error Code: 0
SQL State: 08S01
Query Error: [Macromedia][SQLServer JDBC Driver]A problem occurred when attempting to contact the server (Server returned: Connection reset). Please ensure that the server parameters passed to the driver are correct and that the server is running. Also ensure that the maximum number of connections have not been exceeded for this server.
Custom Error Code: 08S01
Database Error Information:
Native Error Code: 0
SQL State: n/a
Query Error:
Query Of Queries runtime error.
Table named GlobalDetails was not found in memory. The name is misspelled or the table is not defined.
Custom Error Code: n/a
Thanks in advance to anyone who has a suggestion.

Hi, could DBA check MS SQL Server connection logs???
May be server has some limits (for example sessions, memory and e.t.c.)

Oracle Driver / JAR problem

Hi,
Here is the troublesome code.....
public void connect()throws Exception{
          //set up the Driver
          try     {
               //Problem here when running in a JAR
               DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver());
               JOptionPane.showMessageDialog(null, "Conencted to database!", "Connected",JOptionPane.ERROR_MESSAGE);
          catch(Exception e){
               System.out.println("Driver initialisation failed");
               JOptionPane.showMessageDialog(null, "Unable to locate OracleDriver()", "Error in connection",JOptionPane.ERROR_MESSAGE);
          //Make a connection to the database
          try {
               theConnection = DriverManager.getConnection(c.getDbUrl(), c.getUserName(), c.getPassword());
          catch(Exception e) {
               System.out.println("failed to make a connection");
               JOptionPane.showMessageDialog(null, "Problem in connection. Please check database connection settings and re-try.", "Error in connection",JOptionPane.ERROR_MESSAGE);
     }This code works fine when running via Eclipse, but, when I put it into an executatble JAR, it fails. I know it fails at the line DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver()); (as you can see in the code above)
Any ideas?
liktid

I replaced
DriverManager.registerDriver (new
oracle.jdbc.driver.OracleDriver());with
Driver driver =
(Driver)Class.forName("oracle.jdbc.driver.OracleDriver
").newInstance();
DriverManager.registerDriver( (java.sql.Driver)
er) driver);now an error gets caught on EVERY occasion (as seen
in the code in the first post), even in eclipse. The
previous version was ok. any further suggestions?
litkidNone of that stuff is necessary. This is sufficient:
Class.forName("oracle.jdbc.driver.OracleDriver");This works in production for me.
Your problem is that your executable JAR manifest Class-Path doesn't include the ojdbc14.jar OR that JAR isn't where your Class-Path says it should be relative to your executable JAR.
%

Y470 driver Windows 8 Problems

Similar Messages

Maybe you are looking for