Y50-70 Display driver stopped responding and have been recovered

No matter CSGO or DOTA2 or running 3D Mark it will fozen and shows PDC_WATCHDOG_VIOLATION, then restart. Or if i transfer to destop when it forzens, it gonna show Display driver stopped responding and has recovered. My display driver is the newest one and even i reinstall system the same thing happened.  

hi johnny93,
Welcome to the Forums.
Can you try these steps:
1. Uninstall both Intel and the Nvidia Display Driver v353.30 from the Control Panel and reboot.
2. Install the following drivers in order and observe (reboot if necessary). You can also get them from the D:\Drivers folder
1st - Intel Video Driver for Windows 8.1 (64-bit)
2nd - Nvidia Video Driver for Windows 8.1 (64-bit)
3. If the problem remains, can you check the status of the system by installing Lenovo Solutions Center or manually run a diagnostic on the GPU and post the results here:
Lenovo Solution Center (LSC)
  - Sample image
Individual Diagnostic Tools (see Video Test)
Let me know how it goes.
Regards

Similar Messages

  • Satellite A500-1GH - display driver stopped responding and has successfully

    My laptop is the A500-1GH and I bought it 2 days ago...
    My problem is that for the fourth time the monitor went black and then recovered and I'm getting the message "display driver stopped responding and has successfully recovered". My graphics card is the Nvidia GeForce 330.
    I would appreciate it if someone knows what should I do to fix this
    Thank you in advance

    Hi Guys,
    I have experienced _*both*_ problems with my A500/O2J with the NVIDIA GeForce GT 330m graphics card. Only purchased it Monday 15th February. Everything came factory installed except Office Professional 2007.
    Set it up on Tuesday and it happened within 2 hours of set up, then again on the Wednesday. On the first 2 occurrances the display went black and recovered after a few seconds with a message along the lines of "graphic card driver has stopped responding and has successfully restored" then today (Friday 19/2) the screen went black and didn't come back on. I thought it had gone in to sleep mode but pressing the power button did nothing. After about 20 minutes I got the Blue Screen saying the system was shutting down to prevent unecessary damage and it then proceeded to restart.
    I'm computer illiterate when it comes to this technical stuff and rang the place of purchase who told me to ring Toshiba (133 070). Of course being in the West they are closed so I will have to wait until Monday (1st day back at Uni).
    Not off to a good start....so i hope this problem can be rectifed quickly and without too much fuss.
    My computer specs are as follows;
    A500/O2J
    Intel Core i5 processor
    Windows 7 Home premium (32 bit)
    4GB memory
    500Gb Sata storage
    NVidia GeForce GT 330M graphics
    Karmon/Kardon speakers
    Everything came factory pre-installed except printer and Office Professional 2007 but both were installed after the problem occured the first time.
    Message was edited by: janette73

  • SLI GTX 970 Nvlddmkm "Display driver stopped responding and has recovered" Error

    Hi everyone,
    I'm having an issue with driver crashes and was hoping someone on here would be able to help. The error I am getting is: Nvlddmkm "Display driver stopped responding and has recovered".
    My PC specs are:
    Windows 8.1 Pro
    i7 4770k with Corsair H100i
    2x 8GB HyperX RAM
    Asus Maximus VII Ranger Mobo
    2x MSI GTX 970's
    750w Superflower Leadex PSU
    I've noticed that the error usually happens while the cards are cooling down after playing a game, although it has been known to occasionally happen while gaming. I am have MSI Afterburner running and have noticed that the GPU usage spikes up to 100% then the power usage drops completely just before the crash.
    This problem has persisted through 3 clean OS installs so I do not believe it is a driver issue.
    My initial thoughts were that the PSU could be insufficient, but after some reading online my system really shouldn't draw anywhere near 750w. What do you think? I am not totally clued up on PSU's, so not sure if my wiring could also be causing the issue - here's a pic:
    The cards use a single cable that joins both cards for both 8-pins, then two other power cables for the 6-pin. Would this be a problem?
    It's also worth noting that the issue doesn't seem to occur when SLI is disabled. I never had any problems with the original card prior to adding a second card though so I do not think it needs RMA'ing.
    Any advice would be greatly appreciate. Thanks in advance.

    Quote from: Svet on 08-June-15, 17:36:36
    oki remove the second card[your old one] and test the newest card only
    I will try this tomorrow, thanks.
    A bit more info, it crashes with SLI disabled. Just found out tonight for definite.
    Here is a screenshot of what MSI Afterburner shows when it crashes.

  • Msi GT683R "Display driver stopped responding and has recovered" error.

    I bought a laptop before 6 months, installd windows 7 x64 and everything works fine. Suddenly, five days before I got this eror " Display driver stopped responding and has recovered ... "but the laptop operates normally, when not connected to the charger, the only difference is that the graphics card works only on P8 state 203/606/324. I've tried everything, install new windows, tried all the video drivers back 6 version, tried two different chargers, raised the voltage in the video card, flash the latest BIOS, flash latest EC driver, changed several types of RAM memory, installed win xp x64, all drivers are from MSI's website, tested temperatures (everything is fine, no overheating), blew video card out of the dust, new thermal paste, tried to change the regedit key (Microsoft recommend), the last windows update, etc, etc. I tried to OC video card with MSI Afterburner, but does not want to accept the clock (last nvidia driver version 314.07) ... On various forums I saw that a lot of people have a similar problem, but not the one topic has a problem with the charger. I tried all sorts of modifications to the 3D nvidia utility. Currently I run out of ideas, I thank you in advance for your help!!!   

    Quote from: starlink on 25-April-13, 16:33:38
    Hi "I have an MSI G683R and the problem started a month ago, but sometimes pc freezes, crashes or restarts, mainly for running games; temperature problems've never had as constantly monitoring GPU and CPU and never exceed 80 degrees, I have the latest drivers for all devices, besides that I have always been maintained by removing all traces of dust inside the pc.
    I have tested the RAM, hard drive, CPU and passed without any problems, including stress testing the GPU and everything ok ", but as soon as the pc game freezes.
    The funny thing is that this never happens while I play with the battery without direct current is connected, but it is annoying the fact the battery only play for an hour.
    Please start your own topic/thread, and do not use someone elses. This is in the FAQ for the forums.

  • Display driver stopped responding and has recovered. display driver amd driver s

    Hello
    I have a problem with my graphics card: R7850 twinforce. It was working very good.(i have windows 8, 64 bits)
    But now i get this error when i play a game(after 1 min already):
    Display driver stopped responding and has recovered. display driver amd driver stopped responding and has recovered.
    Who can help me please?
    Kind regard

    Quote
    PSU:   
      What psu?
    Quote
    MEM: 8,00GB Dual-Channel DDR3 @ 799MHz (11-11-11-28)
    Model? Specs? Matched kit?
    Quote
    OC
    ? Oc yes or no?

  • Display driver stopped responding and has recovered successfully

    Hi everyone!
    I  sometimes have recently  been encountering this error 'Display driver stopped responding and has recovered successfully' .
    This is the version of ATI RADEON Graphics adapter.
    This problem is happening recently (let me say about five months ago)
    I really don't know what may be causing this problem. However, I have created a virtual machine before about only 3 days with these settings:
    Host machine has Windows 7 home premium (64Bit), and the mount of memory available is as follows:
    Physical Memory
    Memory Usage 34 %
    Total Physical 5.95 GB
    Available Physical 3.89 GB
    Total Virtual 12 GB
    Available Virtual 9.43 GB
    Guest machine has Windows 7 home prmium 64bit, and the mount of memory available is as shown below,  I really  needed to this RAM memory size because the Windows  7 got very slow with less than this size.
     Host machine has Graphic adapter with memory size of 6GB
    guest machine hat his video adapter settings below, because I really needed to this video memory size.
    But, as I said I have been facing this error for about five months before VM was created.  Thus, I don't think that the problem is related with VM's video display.
    Also, sometime when visiting some sites containing  video files needing Adobe Flash player, I was faced with that error and the browser got non-responding and then, it got closed.
    It would be highly appreciated if you could help me with this.

    dindin wrote:
    Hi Cooperator ,
    As I see , your catalyst is from 2011.You can use AMD Driver Autodetect Tool.The AMD Driver Autodetect Tool is designed to detect the model of the AMD graphics card and the version of the Microsoft® Windows operating system installed in your computer. If a new driver is available, the tool is designed to help you download it. After a successful download of the driver, the tool will provide you an option to install it.
    Download page:
    http://support.amd.com/en-us/download/auto-detect-tool
    After that ,open Catalyst control center, and set your programs to  performance that you want to run.
    It should solve your problem , this error comes when graphic card need more time that win register alow (about 2sec) , and with right drivers , it shoul fix it.
    Wish you good luck and all the best!!!
    <<<-------***
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thanks a lot,
    When I tried downloading the tool from that link you provided as circled in this screen shot below 
    After amddriverdownload_installer was downloaded, I run it, then another wndows showed me
    Then after download completed, 
    this show me.
    I found the tool cannot be downloaded due to incompatible hardware/software on my computer,
    Although tool couldn not be downloaded, there are some files in this locatin after clicking install.
    As aside, this window below showed me while downloading the tool, then I don't know what let it show me.
    Is it OK or should I uninstall it if it were installed
    Also, AMD Gaming evolved was installed without asking my permission.  
    It is installed as 'Raptr.exe' in this location  'C:\Program Files (x86)\Raptr'
    Also, whenever my Windows 7 got started, this windows showed me, although I didn't set any account for this, there is accont longins as you see in this screen shot belw.
    This raises another question which is what created this account shown above?

  • [W500 and Windows 7] ati display driver stopped responding and has recovered

    Hi,
    I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
    It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
    In the details of the driver, the following can be seen:
    Driver Date: 28/04/2009
    Driver Version: 8.612.0.0
    The card is recognized as a 3650.
    Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
    Thanks in advance,
    gill

    I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button. 
    It's really annoying.
    It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
    Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

  • HP Pavilion DV6-6077er Display driver stopped responding and has recovered

    Hello!
    I am using this laptop for 3rd year already. OS is Windows 7, every standard driver is downloaded from the official page and installed.
    I have a problem, which sometimes occurs while using web browser, graphic-editing software and some games.
    The screen starts flickering and then recovers with a message: "Display driver stopped responding and has recovered".
    I am usind official AMD drivers from 2011.
    Before I have tried to install unofficial drivers or drivers from AMD web site, but all of them had random BSODs and errors. Only the official driver works stable, but sometimes causes this error.
    Is there any possible fix for it?

    Hi Kakofonn,
    At this point I would recommend doing either a System Restore to when it worked or if you don't use restore points do a full System Recovery. If you go this route make sure that you back up your information you don't want to lose.  If you don't want to do that then I would recommend calling HP as they will be able to remotely login to your computer. You can reach HP Total Care at 1-800-474-6836 or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Toshiba Satellite P500 "Display Driver stopped responding and has recovered."

    I have a Toshiba Satellite P500/XEO PSPGSA - 1XE08L Windows 7 Home Premium (64bit) system.  I’ve received the following random message Since I bought the computer back in 2011--- “Display Driver stopped responding and has recovered.” Since I have bought the computer I have returned it to Harvey Norman where I purchased it from for them to fix the issue. They have reformatted and whiped the computer a couple times aswell as going to the toshiba website and installing the latest drivers. I also have done the same steps as Harvey Norman.
    The computer has been sent back to Toshiba also, It was overheating so Toshiba has put a new CPU into the computer to fix that issue and also the hard drive had a fault sector so Toshiba installed a new hard drive. When Toshiba had the laptop they tried to fix this issue with no result. 
    This issue is more annoying then anything because it happens often (a few times a day) and some of the time when the driver fails and the screen stays black, the only way you can fix this is a hard shut down by holding the off button. 
    I have looked at all the threads and have seen a lot of people having this problem. I have tried all the ideas and people's ways to fix this issue but nothing has worked. 
    This problem needs to be solved and I don't want to hear that I need to reformat my computer or restore it to factory settings like tech support have told me to do because both myself and Harvey Norman has done this and IT HASN'T Fixed the issue. This issue can't be good for the computer..
    I am very dissapointed, after nearly 2 years of having this laptop the problem hasn't been fixed and Toshiba has no idea how to fix this issue. This laptop cost me over 2500 dollars and I have had more problems then I would have had with a 500 dollar computer. 

    No reply from Toshiba yet? Great customer service. 
    Anyways this is a snapshot of my screen going black and then coming back with a message popping up stating that the Display Driver has stopped responding and has recovered. 
    As you can see the window that I am in turns fully black after the driver recovers, I have to close the window and re open it. This happens many times a day.
    I also am getting the display Driver crashing and the whole screen turns black and stays black, no matter what you do the screen stays black. I hit Cntrl + Alt + Del and nothing works making me shut it down by holding the on/off key
    I do a lot of business on this computer and use it for all purposes. Due to this issue, every time the screen goes black and I have to hard restart the computer I lose all my work. Due to not knowing when this will happen I am having to lose a lot of work and start all over again. 
    This is ridiculous and Needs to be fixed. I am a Toshiba Customer and I have spent my money for the best of your products and I am very disappointed with the outcome. There has been no help, I have had nothing but issues and the customer service and support for your company is atrocious. 
    In future I will no longer be buying Toshiba and I know a lot of other people who have seen this issue and had the same problems with Toshiba support that they won't be using Toshiba either.

  • ENVY17 3D - Display Driver stopped responding and has recovered

    hi everybody....
    plz i need help .. i have Hp Envy17 3D  , corei7 with graphic card ATI Radeon HD 5850
    when i play any game its work for 5-10sec and then it give me this message >
                     ( Display Driver stopped responding and has recovered )
    i tried to recovery system n change thermal paste , it dosnt help , could any one help plz n tell me how can i slove it
     this what i get when play game >>>>

    Hi,
    Try this fixit and check if it helps (if you havent done it yet):
    Display driver stopped responding and has recovered" error
    If problem continues then try updating or reinstalling drivers for Graphics,Chipset and BIOS updates..I'll need the exact product number to give you the link...or you can get it from this link by entering your product number:
    http://www8.hp.com/us/en/drivers.html
    Here is another link that should give you few more steps that might fix the issue if the above didnt:
    Display driver stopped responding and has recovered”, ATIKMDAG.sys type errors
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • GX740 computer - Display driver stopped responding and has recovered

    GX740 computer - Display driver stopped responding and has recovered
    hi,
    As I told in the title I am experiencing this message: "Display driver stopped responding and has recovered" only when I am playing games. The symptoms are a freeze of the screen (but I can still see pointer of the mouse moving) for 10 seconds, then the screen become black, and the game recover. Frequency of this depends of the game, but it can be really often.
    To be more precise about the situation: I just sent my laptop to Rma services (for a totally different problem), they said that they updated the vBios of my graphic card.
    before sending my laptop, I never experienced this kind of message before. Even if sometimes I used to have GSOD or BSOD screen on certain games.
    Moreover, my Graphic drivers are up to date (using driver sweeper and ccleaner ), I tried several stuff to fix this problem, but nothing worked so far. (reinstalling system, try different ATI drivers, all of my drivers are up to date besides, try to set different options in windows, act on registry  ... and other stuff).
    So I do not know what causes that, maybe the new vBios is not compatible with something ? Ram memory issues ? power issues ?
    According to what I read , it is quite a very common message, and it does not seem to be hardware related.
    But we never know. Could you please help me on this, because I am running out of ideas to fix this issue.
    Thank you for helping
    Geoffrey

    Quote from: ricor on 26-January-12, 22:43:59
    Svet,
    Don't you think that the new bios from the 3D card bring some bugs that could be resolved by flashing the motherboard bios ?
    Thanks
    Rik
    Quote from: ricor on 26-January-12, 22:43:59
    Svet,
    Don't you think that the new bios from the 3D card bring some bugs
    Could be, but there is no such reports until now.
    Quote
    that could be resolved by flashing the motherboard bios ?
    The latest vbios should be used with complect with latest EC version.
    Quote
    nevermind... I also contacted the custumer service, and since Friday no answer. Hopefully, here Svet tried to help greatly thx man.
    Too bad, we could not fix it.
    contact to repair person again and tell them that the notebook which is suppose to be repaired don't work properly..

  • Satellite L500 - display driver stopped responding and has recovered

    hi
    i have a concern regarding an error in my pc ......
    the error is "display driver stopped responding and has recovered"
    i had been reinstelled the windows as well as search for apdated inter display driver
    but i didnt work .....
    i appreciate for any advice and instruction regarding this problem....
    thank you very much

    In most cases such error message is caused by graphic card driver.
    Not quite sure why the graphic card driver stops responding but I think an simple GPU driver reinstallation should be helpful to sort out such issues.
    In my case such message appeared in the past for one time. It happened while gaming.
    I guess there was an problem between the driver and game or maybe the GPU temperature was too high however, it was an temporal issue.

  • TDR timeouts ("Display driver stopped responding and has recovered"​)

    I have problems running GPGPU applications (OpenCL). After some seconds of computation my application crashes and video adapter is restarted ("Display driver stopped responding and has recovered"). 
    Can anyone tell me how to change or turn off TDR timeouts in Windows 7? 

    hey kuba,
    not too sure if this will work for you, but i found this
    http://social.technet.microsoft.com/Forums/en-US/w​7itprohardware/thread/92a45329-3dd1-4c42-8a53-42dd​...
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Display driver stopped responding and has recoverd!!!

     i keep getting display driver stopped responding and has recoverd, when i watch a video or play a game i have brand new 
    hp compaq 100 - 002eb Desktop PC 
    (serial no.) {Private Information Removed}
    (product no.) E6Q45EA#UUG
    im using windows 8 
    can some one help me
    Phet

    Hi Phet, the link that I sent you will work for windows 8.  I was also wondering if you did the free upgrade to windows 8.1 ? 
    If you decide that you want to call HP Total care, here is a link that will give you the calling information for your area.
    http://goo.gl/qHlWX
    Thank you
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Re: Qosmio X500-11Z - display driver stopped responding and has recovered

    PN: PQX33E-02J00TCZ
    Hello i got this problem:
    my friend bought new Qosmio for gaming ... and problem is with graphic card Nvidia GT 360M
    graphic card says this: display driver stopped responding and has recovered.. screen flashes twice and its ok.
    its when i start windows (windows 7 HP 64bit) or when i click in device manager on graphic card, on interner when I surfing ... ordinary work, nothing heavy for notebook like this :-)
    i changed driver - standard uninstall, then cleaned pc with cc cleaner and install new driver
    error still continues saying that ...
    i tried nvidia drivers and official from toshiba support. both same. problem stayed.
    can anyone help ?

    > can you upload driver somewhere ? I mean graphic driver the mentioned version
    You can find it HERE .

Maybe you are looking for

  • Disk space problems on Macbook Pro

    Hi I have started getting messages that the startup disk is full and that I should delete files etc. I have deleted some photos, emptied i photo trash and the regular trash. This has got me back to 694 MB available on the HDD. When I loom at the HDD

  • Tips on deepening shadows in a clip?

    I'm curious about the best combination of effects for deepening blacks and the other darkest areas of a clip whilst leaving the lighter areas relatively untouched. I have a bunch of material where the general brightness levels are perfect, save for w

  • When will there be support for the norwegian language?

    I just started using the iBooks Author and plan to use it for a book I already have made. Now in Inspector, More, Text, my language is the only Scandinavian language that is not supported. For anyone who would like to know, this means nearly all of m

  • Question about using HFS+ & FAT partitioned hard drive with Windows

    Theoretically, if I have a [mobile] hard drive with one partition being "HFS+" and the other partition "FAT," What would happen if I used it on a PC? Would it only mount the "FAT" partition or both the "FAT" Partition and the "HFS+" Partition? Apple

  • How to increase row height in table control?

    Hi experts, We have a push button in table control created using screen painter. Since this is a touch screen transaction, the default height is very small for the worker in the plant to click on a specific row, i would like to know if there is any w