Y50 clicking sound from left speaker and muffled sound

Hello,
I just bought the Y50 yesterday with the GTX 960M. Unfortunatly i noticed while playing that the left speaker started to do a clicking noise, in addition the sound became muffled. When i tilt the laptop the problem is resolved i.e. the clicing stops and the sound returns to normal. After a few minutes the same problem returns until i tilt the laptop or lift it again.
Please help.
Model Number:
20378
Serial Number:
Mod comment: Serial number removed for members protection.

Hi Goldenbird,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with left speaker in your Lenovo Y50 laptop.
This might be issue with the speaker cable which is not seated properly, please visit the nearest service center fo further details
Click here to open a link where you can select the country and get the exact contact support number. I’m sure
they will be a great help.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

No sound from left speaker headphone out

Suddenly no sound coming from left speaker through headphone output only. Records in stereo plays in stereo but no sound on left. Tried all the usual suspects ....no luck. Any suggestions

Nowhere near enough information to go on, really. If this is a switched socket and the speaker works when it's not connected, then there's either a socket fault or a headphone fault. Try it with another pair of headphones and see if it still happens. If it doesn't, you have faulty headphones. If it does, then you have some sort of a wiring or socket fault.

No sound from the speaker and missing speaker device listed with Window 7

I have Window 7 and with SB X-Fi card installed for a long time now but yesterday, there is no sound from the speaker which connected to the normal speaker output of the card. I check the output device and the specker device is missing. I tried to run the software but it says no device.
How do I correct the problem?
Thank you.

Take it to your local Apple Store along with US$149 for a replacement.

No sound from left speaker on Pavilion DV7-3128CA laptop

I have a DV7 laptop that I purchased in May 2010. I have always used headphones for this laptop. Over the last few months, I had trouble getting audio from the left side of the headphones. Usually I just adjusted the headphone cord and the problem went away. As time progressed, it became increasingly difficult to get audio, but i figured it was just a loose connection on my headphones. . I then tried a different set of headphones in both headphone terminals and the same result, minimal audio at best. It seems the right hand speaker on the jack is perfect, music and DVD's, it is just the left side of the audio on the headphone jacks. Any suggestions?

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio in both speakers.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

A Single POP Sound from Left speaker, after system heavy load.

Hello From Russia)) I bought Brand New Macbook pro 15" Late 2011 Ci7, this is incredible machine. But a month past and i started to notice a very strange behavior:
When i using mac for resource "Eating" application or processes my computer starts to Heat-this is normal.
When i close all the apps here starts interesting) I have Istat installed, so i can see what temps are in my system. Computer is cooling, and when cpu reaches 50-55 degrees (Celsium, from 80 degrees, because of heavy load) ,my left speaker produces a single loud pop sound. (like something turning of may be)
In other terms of use absolutely is fine! It is very strange and i dont know is normal or not(
Thank you very much, and sorry for my english.

That is not something I would expect. I would go to a repair facility and have it checked.
Ciao.

AUdigy 4, poping sound from left speaker ?

So i get this poping sound from my left speaker, but the right speaker is ok. I use Audgigy 4.

Hi moon, and welcome to Apple Discussions.
Sounds like it's time to speak with someone higher up, and politely explain the situation to them. If no luck there, call Apple Customer Relations. Make sure you get case numbers for each time they attempt to fix something.

Poor sound from left speaker hs-1200

My headphones were working fine until yesterday. Now even in the test the sound is fine from the right headphone speaker but seems very faint from the left speaker. I have a vista ultimate system, have tried all available usb ports, reinstalled the drivers and confirmed my external speakers do pick up stereo sound fine. Ive checked the balance and both are equal. Any suggestions?Message Edited by elasalle on 02-11-2009 05:30 AM

RMA would help e-mail cerative

Only sound from left speaker!!!!!

Hi i have a HP Pavilion dv6 Notebook PC. only my left speaker works and if i try headphones only left works there maybe its my audio driver (IDT High Definition Audio CODEC) i really dont know plzz give me some answers!!

To Start with, check in sound balance...to do that...
Go to control panel -> Sound -> Double Click on Speakers -> Levels -> Balance...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

2011 MBP 17" 2.3 GHz - High pitch hissing sound from left speaker

When I transfer large amounts of data (wifi and ethernet) I get a high pitch hissing sound from the left speaker. When the transfer is done, the hissing stops.
Is anyone else experiencing this and is there anything I can do to stop it?
When it occurred: I was transferring data from my old MBP to my new 2011 MBP first via WiFi, then by Ethernet (much faster . My old (2007) MBP had not hissing what so ever, by my new MBP was rather loud. I'm very happy it's only when using the network.

I get this sound every time I download, WiFi or Ethernet it dosen't matter the sound is the same. I can't guarantee that it's from the speaker, I have an old Netgear switch that sounds the same when I use it (just to clarify: I'm not using that switch anymore or ever have with this MBP)
So it could be some electrical sound (I'm not a hardware engineer) just a guess.

No sound from center speaker and static from Subwoofer

Hello everyone,
I have used the search function and found several topics with the title "no center sound" but none of them had a usefull solution for me. I am using a Medusa 5. Headset and have connected it correctly. Note that the setup worked for over 3 years, but aperently recently something in the settings must have changed since I noticed playing Fallout New Vegas, that my center sound is missing.
Here are some facts :
I am using Windows Vista home 64 Bit with the X-Fi Xtreme Gamer card
Using the Creative Console Launcher ver. 2.6.09 (Settings on Game Mode, CMSS 3D disabled, Crystalizer disabled and EQ disabled). Clicking the center speaker for testing, gives me no sound. Clicking on the subwoofer gives me a static sound. Going to the settings "Bass" and enabling Bass Redirection. Doing the same test gives me a "dull, hollow, silent, very far away, hardly hearable" sound on center and the subwoofer speaker, but not a usefull result.
Leaving the Creative Console Launcher and going to the standard Windows Vista sound menu, I can there click speakers for testing aswell. There is still no sound from the center speaker, however clicking on the subwoofer gives me a very nice bass sound, so working as intended for the subwoofer.
I tested the center/subwoofer connection by connecting it to my Ipod, speakers are working.
All drivers and application are the latest version.
On the webpage of Speedlink (the manufacturer of my headset) they refer to a THX Console. I am sure I have seen that application on my system long time ago, but it is not installed anymore. I can't find it on the creative page either, so I am a bit confused where that program went (and even if it can help my problem).
I am 99% sure it has to do with a setting somewhere in the software, but I can't find it. Any idea?

Hi,
Can you please launch your Creative Console Launcher and click on the Default checkbox? That should reset everything back to it's default settings. Run the speaker test again to see if you are getting sound from the center speaker.
If possible please test the sound card on another computer, that should help you find out if the sound card is faulty or not.

Only Getting Sound From Left Speaker/Earbud

I don't know what's wrong with my Nano, but I've tried the R's and they aren't working.
Basically, there's no sound coming from one of my speakers/earbuds. At first, I thought it was a problem with my earbuds, so I got new ones, and it still didn't work. And then I tried plugging my IPod into my portable speakers, and only one speaker works. I really don't understand. Help Please?

That is very interesting.... I have 2 ideas (meaning they probably will not work but try them anyway)of how you can get the sound correct.
1. try putting sound check on ( if it is on, then put it on then off. if that doesn't work, go to step 2...
2. try restoring the ipod(*MAKE SURE YOU CAN GET THE SONGS BACK EASILY BECAUSE THIS MAY NOT WORK, IT'S JUST AN IDEA!*)
Good Luck!

No sound in left speaker and continuous "fuzz"

Sorry to be brief and to the point but I will be late for work if I'm not. Problem is that my Powerbook's left speaker started to cut out one day and was then gone. Now all that's left is the right speaker which also sounds very distorted. There is also a continuous fuzz that never ever stops regardless of if the speakers are on (the only way to get rid of it so far is to plug in an audio adapter into the port.) At first I thought I damaged the speakers but then I plugged my headphones in to see and it was exactly the same in the headphones... no sound in the left and constant fuzz with a distorted right ear. I have done all resets (pmu and such) but to no avail. Can anyone help?

Already checked before doing doing diagnostics and pmu resets and such but thanks. For any future responders I did fully check the sound preferences in systems preferences and all setting in audio/midi setup as well as the settings for my firewire card for my mackie board.
Thanks again.

I get only sound from left with 5.1 sound system on Satellite P100

Hi!
I have a P100-347 and a logitech 5.1 sound system.
The logitech 5.1 has 3 connection: 1 to be plugged to the Line-In, the other to be connected to the Line-out and the 3rd to be connected to the Microphone socket.
When using it on my desktop which has a random SIS sound card it works fine.
Yesterday I've connected it to the P100-347 but I only get sound from the Line-out socket. I have changed the sound preferences to 5.1 but it makes no difference... I only get sound from the Line-out. Is there any drivers update that I should do or is anyone aware of this and how can I fix it??
Just one more thing... With the laptop came this cd "Express Media Player Recovery CD", what is this? Is this something to be installed after runing the "Product Recovery CD" in order to install some drivers or whatever is in this cd comes with the Product Recovery CD as well? Does anyone knows?
Thank you.

Hi
There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
The both another jacks provide only the function for signal (sound) receiving!
My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

Only sound from left with sum stack

Hello! When I create a sum stack this happens (only sound from left speaker:
But I want it to look like this:
All the tracks that I used to create Sum 1 worked perfectly (like Sum 2). What to do?

Hi
There is no problem. As you said the notebook supports Line-in; headphone & S/PDIF jack and Microphone jack.
If you want to connect the HiFI or another device you have to choose the headphone & S/PDIF jack. Only this port provides the audio outputting.
The both another jacks provide only the function for signal (sound) receiving!
My notebook provides the same jacks and I have connected the notebook to HiFI (5 speakers) via Y-audio cable like this one:
http://images.belkin.com/F8V235-06/FUL1_F8V235-06.jpg

Sound only coming from left speaker.

I recorded live music last night from a soundboard in a music hall. The new belkin tunetalk pro on my ipod g5 worked really well and was easy to use. Problem is I did not have the right kinda hookups. I need two 1/4 plugs that converted to one 1/8 mini jack. so i had one 1/4 to 1/8 mini and they gave me a great sounding feed but it's only on the left as in the left ear. i downloaded to to itunes. actually it did it as soon as i pluged the ipod in. i did nothing. the sound guys said i should be able to split to right and left with something like garageband software. i impoted into GB and now i still have the great sound coming out of my left speaker and nothing on the right unless i choose mono 1 or mono 2.
my question is how do i split this and make the recording come out of both speakers? the file in garageband has 2 wave zigzag lines. one on top of the other. i'm sure there's a way but so far i've not found an easy fix on apple garageband support groups but i've not asked either. tonight i will have the right connections so will see how well a rock show records. last nights was an acoustic show with a guitar and vocal mic

You can't really make a stereo file from a mono recording.
Stereo needs two mic/2 channels in the recording phase. The best you can do is set the track to mono so it comes from both speakers, or create fake stereo by using two tracks and offsetting one of them slightly and panning each track to the side some. It won't be stereo, there will be no center, just Left and right

Y50 clicking sound from left speaker and muffled sound

Similar Messages

Maybe you are looking for