Y500 with 750M SLI on Ubuntu

Did anyone managed to get SLI running under Ubuntu 12.04 or any other version of Ubuntu? I have Y500 with dual 750M and SLI works fine under windows. I'm running latest 319.23 drivers under Ubuntu, both graphic are recognized but only one is used. When I tried to add --sli=on or multigpu='auto' I was not able to boot to Ubuntu. Thanks

Similar Messages

With out SLIS ?

With out SLIS is it possible to write the ALV's programs?
if we can write what happend?
what is the noramal alv's and SLIS used alv's plz telme ?

Hi,
Yes, With out SLIS it is not possible to write the ALV's programs by using Function Module expect ABAP Objects (Classes and Methods)
you can make ALV with out SLIS Typepool by using ABAP Objects (Classes and Methods)
So SLIS is optional for ALV
Reward with points if helpful.
Regards,
Vijay

[Resolved] No boot with K8N sli Platinum & AMD 64 X2 3800+

Hye,
I've received these new stuff last night (everything is good until here) :
- Antec Sonata II 450W
- MB MSI K8N SLI Platinum
- Proc. AMD 64 X2 3800+
- GC Sapphire X800 XL 256Mo
I've assembled all and turned it on... No bip... but all the fans are turning... and the screen says "No signal" and becomes black ( and me )
Can someone help me? Please?
On the MSI site, I also found this :
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
Maybe the proc. and the Motherboard are not compatible? Has someone already tried this combinaison (MB+Proc.)?
My Thanks in advance.

Quote from: darinn on 12-November-05, 03:22:08
I will ask the sellers if they can update the Mobo for me.
But with the last version of the bios, will the mobo accept the dual-core with this proc. AMD 64 X2 3800+?
And if it's not possible I'll change the mobo.
Thanks .................................. again.
Pretty much any SLI motherboard supports the X2 3800. MSI is just really pathetic sometimes. So, I had the Abit AN8 SLI before and their latest BIOS (17) supports all X2 CPUs. But Im sure most other brands support them too.

Black screen with underscore after updating ubuntu on Lenovo G560

hello everybody, I'm new here. I looked for this problem online during the past few days but I haven't found a solution. I have a Lenovo G560 and I divided my hard drive into two partition, I installed Ubuntu on C:\ and Windows on D:\ and I haven't had any problem, but after updating ubuntu to version 14 my computer couldn't boot anymore. the bios loads and I see the Lenovo icon but then I just get a black screen with an underscore (not a blinking underscore), I tried booting from a bootable USB stick but the same thing happened (I put it as the first device to boot from in BIOS settings). can anyone please tell me what are my other options ? what should I try now ? thanks in advance and have a good day !

Hi s, and welcome to Apple Discussions.
Try this:
Hold down the Option+Command (Apple)PR keys, boot/restart your MBP while continuing to hold down those four keys, and after you hear the startup chime for the second time, release the keys. That should reset your PRAM and resolve the issue.
If the issue persists, while you're booted into Open Firmware, just after the prompt, type in:
reset-nvram
then press return, then type in:
reset-all
and press return. This should restart your MBP and it should go back to starting normally.

Problem with Flash player in Ubuntu 11.04 for Firefox

I am running Ubuntu 11.04 on my laptop and use firefox as my main browser.
I have a very strange experience when browsing video sites like Youtube.com or Bumperhit.com
Some videos are playing all right.
But some others, show an error message "Please install Flash Player" etc etc.
I am unable to understand, why this is happening only for some videos?
Also when I try to install the flash Player from Adobe's site, there is no option to save the program.
I would like to save the program, so that I have to download the installable multiple times.
Thank you in advance for your valuable guidance.
Regards
Sujata

Adobe offers the Flash installer as a tar.gz archive and as an rpm archive. 
Both files can be opened with a proper archive manager and you can copy to libflashplayer.so to a plugins folder in the Firefox Profile Folder (you need to create that folder) or to another folder that Firefox scans for plugins if you do not want to install the plugin via the software installer.
*http://kb.mozillazine.org/Determining_plugin_directory_on_Linux

Thinkpad t420s - Help with video card on Ubuntu 11.04

Hi,
I just purchsed a Lenovo t420s with the following system specs:
Intel Core i7-2620M Processor (2.70GHz, 4MB L3,1333MHz FSB) with Intel
14.0" HD+ (1600 x 900) LED Backlit Antiglare Display, Mobile Broadband Ready
NVIDIA Quadro NVS4200M Optimus technology (1GB)
6 GB PC3-10600 DDR3 SDRAM 1333MHz SODIMM Memory (2 DIMM)
128GB Solid State Drive, Serial ATA
Intel WiFi Link 1000
It's a really good machine, but unfortunately I am having problems making it work with Ubuntu 11.04. I am a long-term Linux user, a python developer and a supporter of open source software, I cannot use Windows for my purposes and I need help to enable my vide card drivers.
I did a fresh install of Ubuntu 11.04 on my system, and updated all packages. I then installed the ltest Nvidia drivers available, and ensured that Optimus is disabled in the BIOS. After rebooting, nvidia-settings complained that my system isn't configured to rnu the drivers and I must run nvidia-xconfig so I did.
After running nvidia-xconfig, my system wouldn't want to run Xorg, and stayed in terminal mode. I checked the xorg log and found this:
(!!) More than one possible primary device found
(II) Primary Device is:
(EE) No devices detected.
Fatal server error:
no screens found
I saw something about this error here : ftp://download.nvidia.com/XFree86/Linux-x86/270.41.03/README/README.txt
I am running version 1.7 ov xorg, so this should be fixed. I tried to nvidia-xconfig --enable-all-gpus but it still wouldn't work.
The Ubuntu market is now at about 15 million Desktop users, and many more with other Linux distributions, I think Lenovo would greatly benefit by contributing to Ubuntu and helping the software be compatible with the hardware they sell.
Could someone please help me with this?
Kind regards,
Benoit

This will not help, but I recently tried 11.04 on a
Z560 (with just intel graphics) and had no luck
getting it to work. Previous versions work fine.
Is there any other linux distro that will serve your purpose?

Problem with CTX_DOC package and Ubuntu 12.04

I have installed Oracle 11gR2 on Ubuntu 12.04 and also Oracle 12c on another Ubuntu 12.04.
I know that this is not a supported distribution, but we have a case where it's necessary to have Ubuntu.
Following some instructions, that we have read in some posts ,the installation has finished fine.
It seems like everything is working but there is one thing that doesn't work and we needed.
The problem are the calls to CTX_DOC.IFILTER that we neeed to convert some PDF into a BLOB column into HTML, to later insert them into another column.
The error that we get is:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: in "CTXSYS.CTX_DOC",line 3039
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: in "CTXSYS.DRVDISP", line 372
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: in "IDISC2013.CONTINGUT_DOC", line 16
ORA-06512: en line 2
(CONTINGUT_DOC is the procedure that makes the call to CTX_DOC.IFILTER)
If I replace ctxhx to another executable script that writes some text to a file I can check that is not launched from the database.
If I call ctxhx from operating system it works fine (also using user oracle)
We have also checked tht LD_LIBRARY and LB_LIBRARY_PATH to include $ORACLE_HOME/ctx/lib and $PATH to include $ORACLE_HOME/ctx/bin
I have read that some people have the same problem but they didn't receive any solution.
Any idea?
I think that this could be so simple to resolve (install a shared lib, create a symbolic link of a library, create an environment variable, recompile something with an specific option, check a log file, etc.)
Thanks

user561272 wrote:
I have installed Oracle 11gR2 on Ubuntu 12.04 and also Oracle 12c on another Ubuntu 12.04.
I know that this is not a supported distribution, but we have a case where it's necessary to have Ubuntu.
I'm always curious about the business case that says it is necessary to run a product on an unsupported platform.

Problem with flashplayer 10 under ubuntu: no window for preferences

I use ubuntu 9.10 and try to set preferences when i eg use the site chatroulette.com. the window where I can activate the camera pops up but I can't change the preferences nor close this window (I have no reactions in that window).
On other sites, when I click on the flash plugin window with the right button, I even can't access that window (I use the german version, the option "einstellungen", that means preferences, can't be selected, is painted grey).
How can I change this behaviour and set my options.
first of all I want to change a different cam when sending.

Hi,
please check article-ID [ID 1278870.1] "Wget Failing For Secured Port. “Certificate verification error Self Signed Certificate In Certificate Chain”
in MOS.
And while checking article-ID [ID 412431.1] "Oracle Enterprise Manager Grid Control Certification Checker" I've noticed that Ubuntu is not supported.
Maybe article-ID [ID 1093225.1] "DB Control Stops Working Due to emoms.properties Becoming Empty" helps as well...
HTH
Edited by: VivaLaVida on 22.03.2011 10:30

Having issues with oracle xe on Ubuntu 10.10

i have finished installing oracle xe on ubuntu but when i am trying to go to DB start page (using oracle developer link) http://127.0.0.1:8080/apex , the firefox shows it can not open this page.
Also, i am not able to use its sql command line feature.
i have referred this link: http://littlebrain.org/tag/ubuntu/ (section how to install oracle xe on Ubuntu 64 bit) to install Oracle?
Can someone suggest me the possible resolution?
Also if this is not the correct version of oracle (for my ubuntu), what should be the recommended version (and its procedure to install)?
Thanks in Advance!

Did you configure the database? If you have not, you won't be able to use it. You can do so by going to /etc/init.d Once there run oracle-xe with the configure option.
1) cd /etc/init.d
2) ./oracle-xe configure
3) follow the prompts completing the required information
4) I reboot afterwords but I'm not sure that you really have to.
I think this is the section of your user guide to revisit:
And after the installation is finished, you need to configure it
sudo /etc/init.d/oracle-xe configure
and edit your ~/.bashrc
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
PATH=$PATH:$ORACLE_HOME/bin
export ORACLE_HOME
export ORACLE_SID=XE
export PATH
Hope this helps.
T.

New to java, having trouble with Installing JDK on Ubuntu

Hello, everyone???
I'm try to install j2se jdk-1_5_0_15-linux-i586-rpm.bin on my Ubuntu Linux 7.10, I ran the self-extract file and everything just seemed fine. But when I get to setting the system environment variable , something must have gone wrong. I have read from books which say that I should set 'CLASSPATH=.:/usr/java/jdk1.5.0_15/lib/dt.jar:/usr/java/jdk1.5.0_15/lib/tools.jar'. But I can't find a 'tools.jar' file in the 'lib' directory. There is a 'tools.pack' instead of it.
When I try to test the installation with: 'javac --version', I got :
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
I don't know why. Do anybody can help me with this problem?

I used the Synaptic version of Java. I don't like where it puts the JDK in a protected folder. I want development stuff in my home folder. The Sun download with the NetBeans is the best, IMHO. You put your install where you want it. NetBeans then slams the pathname with every javac and java you run. Works great for development. Then, becomes the FireFox problem -- the java plug-in. Because I'm AMD-64 I have to use the IceTea java plug-in.
Would Sun please, please write the 64-bit plug-in?
The last irritating problem you will have is running java from a Terminal. That takes internal links in your File System. You can do what NetBeans does: java -classpath=~home/desktop/jdk1.6.1/bin/myPrograms myProgram. Or, you can make SymLinks. I keep a bookmark to this topic from the Ubuntu Forums:
[Custom Install JDK java|http://ubuntuforums.org/showthread.php?t=319138]

Can't turn on/off wireless with Fn key in Ubuntu [NB250-10Q]

Hi,
I'm using a *NB250-10Q* with kUbuntu 10.10. It works great, but i'm having problems with Fn-F8 key to turn on/off wireless.
Some Fn keys are working well, like bridhtnes, sound... but Fn-F8 to turn on/off wireless is ignored.
I've read a lot about this problem, but none of the proposed solutions have worked to me.
Is anyone able to turn on/off wireless through Fn keys in linux?
Thanks in advance.

Hi
Problem in the whole story is that your notebook was not designed for Linux and, as far as I know, Ubuntu is not supported OS so Toshiba doesnt offer any driver or Toshiba tools and utilities.
Generally speaking you are on your own. If Ubuntu works well, you are lucky but if there is some missing functionality, Im afraid you must live with it.
For Win7 Toshiba has designed Value added package that contains button support utility, flash cards and all FN options will be controlled by several different tools packed in this package.
Such VAP doesnt exist for Linux.
Try to ask some Linux specialists on Linux forums if there is some solution for this.

Your experience with Toshiba NB550D and Ubuntu

Hi,
does anyone of you have any practical experience with the laptop NB550D and running Ubuntu 11.04 (like did you have any problems with it )?
Thank you
Message was edited by: ryuuko

Hi, sorry am not in Eu; i live in the US... the mini notebook model I have is NB505-N508BN. I think you should have equivalent models where you live. Just wanted to say that I have been able to successfully install and dual boot between Win 7 Starter and Kubuntu 11.04, on my netbook. In fact, i mostly use Kubuntu now, unless I need to make a backup of my system (which I do from Windows). It works great and I love it. Right now I am posting from a Firefox browser opened in Kubuntu.
I posted a long note and some screenshots of my Kubuntu 11.04 in the Toshiba mini netbooks users forum (US). please see this link if you are interested. Y'all have fun...
Nat
This is the link:
http://forums.toshiba.com/t5/mini-notebooks-NB-series/Kubuntu-Linux-alternative-to-Win7-on-NB505-N508BN/td-p/208954

Random Crashing with from SLI gtx980

I have had random issues with My two 980 randomly crashing with 3 ROG swift monitors . Either i get a black screen across 1-3 screens then a nvidea driver error that it has crashed and recovered or a same black screens then i reboot.
I've tried complete driver uninstall then reinstall but no dice.

Quote from: purge98 on 12-December-14, 09:53:35
What GPU temperature are you getting? I successfully run my GTX980 at 1500Mhz and 75c with no problems.
I'm getting around 50-70c.
So I've streesed test second card with no problem except they benchmarked two different amounts. First card benchmarked 1800 and second at 1200. Also notice sometimes one fan randomly stops turning. Keep testing it see if any crash but does look like the probvlem is once use them in sli.

MOVED: Highest HTT with the SLI Platinum (MSI-7100)

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=93189.0

Dont mess with the HT, it doesnt give you anything.
The highest FSB people have reported is in the range of 375 or higher. (HardOCP)
Keep your HT at 1000 or below by decreasing the Multiplier. (Normally set to 5x)
This has been explained in previous posts, but since Im being lazy and dont want to search for them, Ill just restate it. The HT controls the bandwidth available on the board. With 4 Hardrives in Raid, Two cards in SLI, a Dual Core Processor, 4 Sticks of RAM, and Two CD burners, all running 100% (Not possible, no program or sets of programs can achieve this.) The required bandwidth is still below what you get at a HT of 1000 Mhz. (Sorry dont remember the exact number, Its posted on an Overclocking site somewhere.)
Multiple people have done many tests and confirmed that the performance gain between 800 to 1000 HT is negligible and beyond 1000 HT is really nothing. But to answer your question, I have hit a HT of 1275 before the board became unstable. And again, when I say unstable, I mean I lost a harddrive, had to reload the operating system, and other generally bad things happened.

P7N Diamond with GTX260 SLI?

Is this combination going to work? I saw on couple of forums that some boards that were SLI-ready didn't work with two GeForce GTX260 cards, so I'm trying to find one that does for sure. My new rig will be like this:
CPU: Inter Core 2 Quad Q9550
GPU: NVIDIA GeForce GTX260 (and will buy another one soon)
RAM: OCZ 2x2Gb DDR2 1066Mhz Platinum Kit (will add another 4bg later, I think 4 is enough at the moment)
HDD: WD 1Tb 7200 + WD160Gb for OS's (Vista Premium 64bit and Fedora Linux)
PSU: Probably ThermalTake Thoughpower 1000W
OS: Vista Premium 64bit
and I will put it all in ThermalTake SopranoFX full tower. Now only thing I need is a board, so I was hoping that someone can help me pick one. Thank you in advance

I don't see why it wouldn't work. Could you give us some samples of the reports saying that GTX 280 SLI doesn't work?

Y500 with 750M SLI on Ubuntu

Similar Messages

Maybe you are looking for