Y510P Has No 3D under Windows 10

Y510P Has no 3D in Windows 10049. Driver 350.05.
Videos can I see on youtube. Under Boinc both graphics cards for calculations are used. But not a 3D game or benchmark functions.
Can someone help me
Sascha Becker \ oetker201
Solved!
Go to Solution.

oetker201 wrote:
Y510P Has no 3D in Windows 10. Driver 350.05.
Videos can I see on youtube. Under Boinc both graphics cards for calculations are used. But not a 3D game or benchmark functions.
Can someone help me
Sascha Becker \ oetker201
You did not specify what version you have installed for Win 10 so I'll assume version 10049. Try using other version or use other driver version.
Note: Win 10 is not yet final so expect other features and bugs.

Similar Messages

Get error "Firefox has stopped working" under Windows 7

I'm running Firefox 3.6.10 (just upgraded, I was at 3.6.9) and every so often (maybe 1-2 days), Windows 7 decides to crash it with the error "Firefox has stopped working". Firefox itself does not seem to be generating a crash id, which is disappointing since that way it would be reported. I run a LOT of tabs, at the moment I have around 100 open. I notice that the CPU usage seems to get very high (it shows 25% for me, but I have a quad core machine so I guess that is 100% of one CPU) as well as memory (1.5gb). It's almost as though Windows thinks that Firefox has stopped responding because of the high CPU usage and decides to terminate it.
I've seen some posts here reporting similar problems, but no resolutions. I also saw a post elsewhere suggesting disabling throttling in Windows but saw other posts saying that had not solved the problem.
Any suggestions on how to fix or troubleshoot this problem?

I have this problem too. Now i'm using win7 64 bit, i installed the newest firefox 6.0.2 and yahoo messenger 11 -> i got this problem. First time i think this is a firefox's error. I decide to use process hacker (a mini tool to manager running process) to find out what is happening and i found this: the program name "YahooMessger!.exe" run a few second and it calls the firefox crash popup lol. I uninstall the firefox and i see "YahooMessger!.exe" auto run in process hacker! ^^ conclusion: i uninstall Yahoo Messenger 11 and delete two folder of yahoo in my username's document (1 of them have the program "YahooMessger!.exe"), reinstall firefox and get out this problem!
So my question is: what is "YahooMessger!.exe", is it a yahoo's part, is it a spyware or virus? Here is the link of this file, i have archived it with winrar http://www.mediafire.com/?lf8tc9fal5rxlup

My y510p is warming up under windows 8.1

Hi, i've got my pc y510p from 6 months, and these days it's warming up without opening many programs, and it uses 4 go of RAM when i open only google chrome, and this affect the pc's performances when i open some games,
Note: the fan is always working hard. please help me. thanks in advance

Make sure nothing is running in the background. Open the task manager and check all the programs for CPU and RAM usage. I find it easier to set all the values to percents. If you notice something, research what it is and how to fix it. If you don't see anything in the background, I recommend running some virus scans.
P.S. The RAM usage is not unusual. Mine runs with 4gb when I have Chrome and Steam and my other background apps open.
Y510p - i7 4700MQ (Overclocked to 3.6GHz), SLI GT755M, Corsair Vengeance 16GB 2133MHz, Samsung 850 Pro 256GB, MyDigitalSSD SuperBoot 128GB, Intel Wireless-AC 7260, Windows 7 Home Premium (SP1)

Has anyone had success with Messaging Server 5.2 under Windows 2000 Server?

Just to be up front - we MUST use Windows 2000 - they're not giving me a choice to move to Solaris or Sun Hardware. Linux isn't even a choice, nor is WinNT. (I know, it's annoying).
I've managed to get Directory Server 5.1 to run under windows 2000 without active directory installed. I found that I needed to modify the ims_dssetup.pl script that comes with the Messaging Server 5.2 to reference the full path to my ldapsearch and ldapmodify executables. Apparently, this is a win2k specific problem, and is not necessary on WinNT. This made ims_dssetup.pl work and the install of Messaging Server 5.2 work on a windows 2000 machine.
However, at reboot, the job controller and dispatcher do not automatically start. When I try to start the services manually, I get "Error 1067: The Service terminiated unexpectedly".
Any ideas? I'm desperate here - they're gonna make us use exchange if I can't get >>something<< working. Even a 4.x version of messaging server will do.
Thanks

Well, I do understand that.
However, I've installed iMS 5.2 on win2k several times (I admit, w2k pro, not server), and i've never installed AD.
If you can get it installed and working for your default domain, but not for other domains, then most likely it has nothign to do with AD or AD domains. iMS idea of domains is very different from AD's idea of domains. We need to be very clear about such.
for iMS, you have to create additional domains through Delegated Admin, as either "Hosted Domains" or as "Vanity Domains". We do not suggest using "Vanity Domains", and support for such is deprecated.
Once you have created "Hosted Domains" through Delegated Admin, you can add users to those domains, and they should work, just fine.

X230T graphics performance under Windows 8

My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
X320T running Windows 8 Pro x64

rsbrux wrote:
My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
After you changed the setting to "Maximum Performance" , did you run the WEI test again?

Premiere Elements 8 under Windows 7: HOW TO DO?

My system is a MICROSTAR (MEDION) Quadcore 6600(think it's made by MSI) with 4GB memory, 2 x 1TB HD Wetern Digital GREEN (replacing the very poor quality Seagates 2 x 500Gig originaly installed) and running Windows 7 64 and 32 Ultimate. The 32 version was installed especially for PE8
Why I didn't stay with PE7?
Strange enough, PE7 worked perfectly under Windows 7 64bit RC and RTM, but with the Official release of Windows 7 32 or 64 Ultimate, it was finished with the Happy Hour, Crash, crash, crash all the time!
So I downloaded from Adobe a official PE8 and started very happily with it.
But it was CRASH & GO all the way !!!
I have send a few messages to Adobe Contact, which deviated me to this forum so I could spit my poison far from their "Ivory Tower" No answers or help from them. PE8 is paid, so go to ...
I found out immediately that I was one of the many people to regret this "Buy of the Year", but since PE7 didn't work and Windows 7 is so good that I don't want to go back to XP or Vista, I had to find a way to make this SH.. work. Luckily the Forum proposed me a few solutions for which I am very grateful.
After a few editing's with DV (about 3hours long), I am having a little bit more experience with this PE8-pre-beta-thing.
First of all I disabled the GPU-thing in the preferences, then I disabled the "Background rendering".
The Medion computer has a "diet" Nvidia Geforce 8600 so there are no 3D drivers to disable, neither has Windows 7 this Windows Defender, so that could also not be the problem.
Anyhow, these few minor changes seem to have solved a lot of crash problems.
Also, NEVER open a PE7 project in PE8 !!!!! It's really not 100% compatible: no way to render previews and crashes guarantied!
Be very careful in applying transitions and video effects, especially if you start cumulating them. Maybe they will work in preview, but you never know if you will be able to render a film or DVD from it.
For example "camera view" + "Soft edge" ( since I have a Dutch version, I don't know if these are the right names) to make a kind of 3D frame around your image. No problem in PE7, but PE8 doesn't digest it! The only way to render this to a film is to import the project in to PrProCS4 and change the other transitions which are not supported by PrPro with similar ones. Or going from New York to Chicago over Mexico City!!
If you take care of these precautions you can work very satisfactory with PE8, without crashing more then was the case with PE7 (low memory problems)
This PE8 should have been written for 64 bit, so it would have suffered much less memory problems, then now.
Some things I like better with PE8, like the ClipArt's, the Menu's and the new Smartmovie themes, which I create and then edit manually.
Automatic backup creates now 5 instead of one file.
What I don't like:
If you capture in scenes, it's still scene 11 coming after scene 109 etc, instead of counting from 001.
With PE7, you could see in which map the project you wanted to open was situated, here not.
Place of the Project changed, without reason, change for the fun of change?
Making "markers" has become more complicated, without improving. Also changed just for the fun of it?
Can still not capture HDV by scenes, for that I have to use Sony Vegas.
Until now I didn't try to edit HDV in PE8, because I don't trust PE8.
What we really need is for Adobe to bring a major update to fix al these annoying misfits and to make a customer's dialog instead of a one way street policy.
If I find new ways to make work easier and without crashing I will not hesitate to let you know.
Until then, hope this can help you a little bit!
Roald

NO, YOU CANNOT !!!!
If your project was started in PE7 and you import that project to PE8, you cannot, I REPEAT, you CANNOT render this files to a preview.
You wil get the render window, but no counter or anything else will move or happen.
Nothing, rien , nada, niets, nichts!!!!!!
At least not here on neither of the 3 installations which I did under 3 different Windows 7 !!!!

JavaSoundRenderer now running under Windows

Hello,
I found out that the JavaSoundRenderer could run under Windows but only if you use Java 6.0 Beta.
So if you've problems of playing audio in Windows then just install the new Java (6.0) and it will work.
best regards,
thomas

Hi,
Refer [SAP Note:1337708 - Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333333337333733303338%7D.do] and also have a look at
[SAP Note:122050-An error has occurred while attempting to load crystal reports on 64bit|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533303331%7D.do] might be helpful

Can't work with Macbook mini-dvi adapter to s-video out under Windows..??

hi..
My macbook can work well with mini-dvi adapter to tv out under mac os,but it can't work under windows os..
If anyone's using their Macbook and has any comments please let me know..
Thanks.
Richard

Yes, if you can get an s-video cable and plug that into the SCART adapter, that would be better than plugging in composite video.
Clearly, having an SCART connection is not going to "improve" the video going in, you're going to be limited by the lowest quality connection. An s-video connection will provide a higher (but probably not a lot) quality signal than composite video.
-Doug

Using scripting with networking equipment under Windows

It can be a challenge to use scripting to automate working with Cisco devices. The Cisco IOS does not seem to directly provide a command line interface. You are forced to find a way to automate interaction with a telnet or ssh session.
The PERL language provides a number of object-oriented methods to help manage an interactive session, most notably Net::SSH::Expect and Net::Appliance::Session. These options can work well in a Unix environment, but not under MS Windows.
There are PERL for Windows options, the best probably being Strawberry PERL. There is also a Unix under Windows option known as CYGWIN that is freely available. Unfortunately none of these will work well with the way Windows manages low-level terminal I/O. The curious can google "windows pseudo terminal" to see all the technical details.
One way that does work under Windows is Tcl. It was initially named Tool Command Language. It is sometimes shown as Tcl/Tk.
Interestingly enough, Tcl is included within Cisco IOS as tclsh. There is no interaction with the tclsh and this example. It is just a bit of a curious coincidence.
A Tcl port to Windows can be downloaded from http://www.activestate.com/activetcl/downloads. Select Download ActiveTCL for Windows. A direct link to the download that worked at the time of writing is Download ActiveTcl 8.5.14 for Windows (x86)
Once base Tcl has been downloaded and installed there is one other component that will need to be installed from the Tcl Extension Archive, the expect package.
The teacup program that is installed with the base Tcl package makes this easy. The teacup program will work with a proxy.
You can set these Windows environment variables to specify proxy details:
set http_proxy=
set http_proxy_user=
set http_proxy_pass=
Then run teacup install expect
The plink tool from the PuTTY download is also needed. It can be obtained from http://www.putty.org/.
The sample that follows assumes that the data files, script and plink.exe executable all reside in the same directory.
A sample Tcl script follows that reads a file of devices and a file of commands. It will run the list of commands against each device in the device file. It has some basic error checking, but should best be considered a ‘beta’ version. You could do more complex interactions in the Tcl script by adding exp_send and expect command statements. In short, if you can type it you could script it!
Change directory to where your script, plink.exe and data is stored and run with tclsh <script_name>
devices.list
# Comment lines are allowed if they start with a hash mark
# <IP_Addr> <userid> <password> <ssh|telnet> <timeout_in_secs>
nnn.nnn.nnn.nnn    <userid>    <password> ssh         <timeout_in_secs>
nnn.nnn.nnn.nnn    <userid>    <password> telnet      30
commands.list
# term length 0 needed or else IOS will wait for an enter to be pressed at the --More-- prompts
term length 0
show run
exit
Script:
# Run batch commands against one or more devices
package require Expect
exp_log_user 0
set exp_internal 0
set exp::nt_debug 0
set prompt "(#\s*$|>\s*$)"
set env(TERM) dumb
set file_channel [open "devices.list" r]
set DEVICES      [read $file_channel]
close $file_channel
set file_channel [open "commands.list" r]
set COMMANDS      [read $file_channel]
close $file_channel
set command_entries [split $COMMANDS "\n"]
set device_entries [split $DEVICES "\n"]
proc timedout {{msg {none}}} {
      send_user "Timed out (reason: $msg)\n"
      if {[info exists ::expect_out]} { parray ::expect_out }
      exit 1
foreach device_entry $device_entries {
      if {[string length $device_entry] == 0 || [regexp {[ \t]*#} $device_entry]} { continue }
      set device [lindex $device_entry 0]
      set user    [lindex $device_entry 1]
      set pass    [lindex $device_entry 2]
      set mode    [lindex $device_entry 3]
      set wait    [lindex $device_entry 4]
      set serial [lindex $device_entry 5]
      # puts "Device=$device"
      # puts "User=$user"
      # puts "Mode=$mode"
      # puts "Wait=$wait"
      set timeout $wait
      # Spawning the Session
      # If you are logging on to the remote machine using "ssh", "slogin" or "rlogin", the information
      # gets processed in a slightly different manner. With any of these methods, it is necessary to
      # include an additional -l option to specify a username.
      # Next, the $spawn_id variable is captured, storing information about this spawn session in
      # memory for future reference.
      # If you are logging in via Telnet, the final code block in this section is required to pass the
      # username to Telnet. If the login is completed before the script times out, the exp_send command
      # passes the username.
      switch -exact $mode {
            "telnet" { set pid [spawn plink -telnet -l $user $device] }
            "ssh"   { set pid [spawn plink -ssh -l $user -pw $pass $device] }
            "serial" { set pid [spawn plink -serial $serial -l $user -pw $pass $device] }
      set id $spawn_id
      if {$mode == "telnet"} {
            expect -i $id timeout {
            timedout "in user login"
            } eof {
            timedout "spawn failed with eof on login"
            } -re "(login|Username):.*" {
            exp_send -i $id -- "$user\r"
      # Handling Errors
      # The error-handling section of the script is a while loop that anticipates a number of problems
      # that could occur during login. This section is not exhaustive. For example, you could also add
      # provisions for invalid usernames and passwords.
      # If the login is not completed during the allotted time frame, which is set from the devices.list file
      # and specified with expect -i $id timeout, the program displays an appropriate error message.
      # The remainder of this loop makes use of the exp_send command to allow for other scenarios, such
      # as the user typing "yes" when prompted to proceed with the connection, entering a password, or
      # resetting the terminal mode.
      set logged_in 0
      while {!$logged_in} {
            expect -i $id timeout {
            timedout "in while loop"
            break
            } eof {
            timedout "spawn failed with eof"
            break
            } "Store key in cache? (y/n)" {
            exp_send -i $id -- "y\r"
            } -re "\[Pp\]assword:.*" {
            exp_send -i $id -- "$pass\r"
            } "TERM = (*) " {
            exp_send -i $id -- "$env(TERM)\r"
            } -re $prompt {
            set logged_in 1
      foreach command $command_entries {
            if {[string length $command] == 0 || [regexp {[ \t]*#} $command]} { continue }
            # Sending the Request
            # If the login is successful, the code in the if statement below is used to send the "cmd" request
            # to display files and directories. After the request is sent with exp_send, the resulting output
            # is captured in the dir variable, which is set on the fourth line of the code shown below.
            if {$logged_in} {
                  exp_send -i $id -- "$command\r"
                  expect -i $id timeout {timedout "on prompt"} -re $prompt
                  puts "$expect_out(buffer)"
            # Closing the Spawned Session
            # The exp_close command ends the session spawned earlier. Just to be sure that session
            # does indeed close, the exp_wait command causes the script to continue running until a result is
            # obtained from the system processes. If the system hangs, it is likely because exp_close was not
            # able to close the spawned process, and you may need to kill it manually.
      catch { exp_close -i $id }
      exp_wait -i $id
      set logged_in 0
*** End of Document ***

Your friend will have to save the templates as CS6, which he can do.

Firefox does not "close" when closed under Windows 7; Task Manager must be used to "End Process." How do I close Firefox and reopen it without getting a "Still Running" error message?

Even though Firefox has been updated multiple times (currently using Ver. 3.6.13) since I started using Windows 7, I am still unable to totally close it from the toolbar or taskbar. Firefox does closeout on the screen but apparently continues to run in the background. If I open Firefox at a later time, I get an error message stating that Firefox is still running. I then have to go Task Manager to "End Process." Electing to do so allows me to restart Firefox. I never had this problem with Firefox when using Windows XP and I never have this problem with any other software under Windows 7.

https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit

How can i use 3d pdf on my mac? Under windows i can open my pdf with 3d animation but under mac it is not possible. İ also check the web site of adobe, but there are no information about it. Please help.

Hello who can help me?
İ need to open the 3d animation pdf. But my mac is not able to open it and my friends have also the same problem.
İ need this information for my work. İt would be very nice if someone could tell me how i can open the 3 d animation .pdf files. Under windows it is no problem, because adope reader is open it. İ also check the site of adobe to find answers, but no results.

If there is no info on Adobe about it, this is probably a case where there is a special 3D plugin that Adobe has access to on your PC. You need to find out what software generated the 3D. Then you can find out if there is an equivalent Mac compatible plugin. That said, you can always run Windows on an iMac Intel if push comes to shove:
https://discussions.apple.com/docs/DOC-2741

Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

Team,
Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
I have tired.
1. Updating Intel Graphics Card. (unsuccessful)
2. Logging in and out of creative cloud. (unsuccessful)
See log below.
Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
Exception code: 0xc0000005
Fault offset: 0x0000000000024ac8
Faulting process ID: 0x1448
Faulting application start time: 0x01cfe6c7bd37e765
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
Faulting package full name:
Faulting package-relative application ID:

Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver.
Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

Macbook 15" Pro Retina under Windows 8.1 is constantly overheating because of lack of Iris Pro graphics driver

This issue must have been raised many times already. The problem is that modern Macbook Pros under Windows are limited to NVidia graphics making Intel Iris Pro graphics unavailable. And Nvidia graphics in its turn produces pretty much heat, sometimes to the point when it "boils" on your lap.
As an answer to this i heard that Windows is somehow limited (i honestly doubt this in regards to Windows 8.1) and doesn't support dual graphics and other stuff. Well, then give users an option to completely turn off NVidia graphics and use Iris Pro only. Is this possible?

Unfortunately, there is no way to switch. It requires removal of the BC/Windows and re-installation in EFI mode. W7 has some challenges with EFI mode, but W8+ are much better. If you want to try the EFI method, then
1. Backup Windows and all your files.
2. Remove Windows using BCA (do not use any other tools) - Boot Camp: Remove Windows from your Mac
3. Create a partition of the size you want the Windows to be, using Disk Utility. This should be a Free Space partition.
4. Use the Windows Installer and choose EFI boot from the USB built using BCA.
5. Install Windows. The Free Space partition will be split into a 128MB MSR and the remainder as MS Data which will become NTFS during the Windows installation.

Setup cocoon with 9ias 9.0.2 under windows NT

Setup Cocoon with 9ias OC4J (9.0.2) under Windows NT
This was a painful process for me. I finally made it work. Thought my story might help someone else. If anyone sees anything that could cause problems down the line, please let me know.
NOTE: This took me a week to get right, so the restarts I suggest may not be appropriate, just guesses on my part.
A. FIRST SECTION (Based off of steps 9 - 11 of Metalink note 148497.1) - This deploys the cocoon.war file
1. Copy cocoon.war file to oracle 9ias home in the j2ee/home/applications directory. (NOT cocoon_jvm14. I tried to use the cocoon with jvm1.4. The version of 9ias I use wanted 1.3, so that is what I ended up using.)
NOTE: I followed the 9-11 steps from the above note the first time and manually changed the files below, but when I had to reboot my machine a couple of days later it lost the changes. So I went in thru OEM and did it there and have had no problems. These steps are detailed below.
2. Log into Oracle Enterprise Manager. Click on 9ias instance. Click OC4J_home.
3. Go to Advanced Properties. Edit the default-web-site.xml file. Look for the statement <default-web-app application="default" name="defaultWebApp" root="/j2ee"/>. After that statement, add the following: <web-app application="default" name="cocoon" root="/cocoon"/>
4. Go back to OC4J_home. Click on default link near the top of the page. (It has a Path underneath is that says application.xml) Then click on Advanced Properties. Edit the application.xml file. Look for the statement <web-module id="defaultWebApp" path="../../home/default-web-app"/>. After that statement, add the following: <web-module id="cocoon" path="../../home/applications/cocoon.war"/>.
5. Go back to 9ias instance and do a "Restart All".
B. SECOND SECTION ( Based off of Metalink note 184826.1)
1. Go to the Apache/Apache/conf/mod_oc4j.conf file underneath your 9ias home. Add the following line at the bottom of the file: Oc4jMount /cocoon/* home
Either "Restart All" from OEM again, or follow step 3 from the note. WARNING: I read somewhere that if you try to do the dos dcm/opmn stuff with the OEM at the same time, that you have corruption problems? So close the OEM if you do the dos commands just in case.
C. THIRD SECTION (This is what I did with the Cocoon jars to make 9ias/oc4J find them and use them. I am by no means saying this is the correct way. Just a way. If anyone has a different way, I would appreciate hearing it.)
1. Go to 9ias home and in the j2ee/home directory make a new folder. (I called mine xerces.) Copy the following jar files, found in the j2ee/home/applications/cocoon/web-inf/lib directory (this dir will show up after cocoon.war is deployed with the A. FIRST SECTION restart), into your new folder:
a. batik-all-1.5b2.jar
b. xalan-2.3.1.jar
c. xercesImpl-2.0.0.jar
d. xml-apis.jar
2. Log into the Oracle Enterprise Manager. Click on OC4J_home. Click on Server Properties. Scroll down to the bottom and type the following into Java Options: -Djava.ext.dirs=xerces. (If you named your new folder xerces.)
D. LAST SECTION
1. I rebooted my machine and said a prayer. From the url "http://myhost:7777/cocoon/" I got the cocoon welcome page!

I've heard rumors its about a month away. We were waiting for it, but then
decided to go to Linux, as it probably performs better, and the release for
Linux is already out. 9.0.2 is certified on Linux:
- SuSe SLES7
- Red Hat Advanced Server 2.1
Waiting for Oracle to release a software product seems almost like waiting
for a sunny day in Seattle -- you eventaly get it, but its unpredicatable
as to when it will actually be at best...

Problems with saving a html webpage under windows 7

Hello people,
Ik have the next problem. When I an webpage witch I have made for instanse webpage.html open and I change something in it en I wanna save this changes in my webpage I get the next message (maybe the translation is not the right one) An error occurred while accessing E:\users\name\websites\MFC936D.tmp.
This tmp file has every time a different name. The site is not saved (webpage.html) but the html page disapeares when I click the eroor message away. And the tmp file displays in the map where the files are being saved.
My dreamweaver cs4 runs under windows 7
I hope someone can help me.
Thanks a lot.
Bart

E: is another partition were I save my data too.
The file is maybe read only you say. But 2 things sometimes it saves right after I have tried it a few times. And second I have started dreamweaver with administration rights, so you think he has all the rights. But the sme thng happened.

Y510P Has No 3D under Windows 10

Similar Messages

Maybe you are looking for