Y530 virtualization (Intel VT) [SOLVED]

Hi all.I've developed VT activation procedure for Lenovo Ideapad Y530. But provided that your notebook corresponds to the following requirements: - Your CPU MUST support Intel virtualization Technology otherwise you'll get nonfunctioning laptop.
- CPU MSR-register 0x0000003A MUST have zero value on BOTH CPU cores.
If your machine doesn't fit these conditions then my procedure can't help you.If you want to try then you have to send me a request by email ([email protected]) with the following information: - CPU model.- Operating system version (32 or 64 bit).- BIOS version.

Nice work ~You are the man.Unfortunately my core P7450 doesn't support VT.Recently I'm working on overlocking CPU through SETFSB(by modifying specific clock generator.I naked the motherboard figured out that Y530's is ICS9LPR363EGLF but only to find ICS9LPR363DGLF option in setfsb,luckily it worked) and succeeded in reaching 2.4Ghz which is the highest stable frequency(run 104million super pai in 20 seconds).I tested system stability using EVEREST for over an hour without any hard errors.It seems that P8* series have higher voltage so they can reach higher frequency.So do you also have methods to gain the CPU voltage and get ICS9LPR363EGLF‘s datasheet（*.pll file)

Similar Messages

Screen won't dim w/ Intel KMS [SOLVED]

I have a rather obscure Gateway T-series laptop, with an Intel 965 chip. To get backlight working I had to use acpi_backlight=vendor in Grub, but if KMS is on I can't dim anymore, either with the keys or xbacklight. The keys have no effect, and xbacklight says "No outputs have backlight property".
I haven't noticed any benefits from using KMS, so before now I usually had it off, but it seems that that isn't going to be an option anymore. Am I just SOL now? Anyone dealt with this before?
Last edited by JohnnyRogers (2010-03-14 17:38:00)

JohnnyRogers wrote:I've found a workaround, in this post: http://ubuntuforums.org/showpost.php?p= … ostcount=9 Marking as solved.
Might be smart to copy that forumpost here for future reference, in case the link becomes invalid for w/e reason.
Re: No brightness adjustment on samsun n210 (Intel GMA 3150)
Hi,
you can adjust brightness level by sending values directly to device, by setpci:
setpci -s 00:02.0 f4.b=ff
where 00:02.0 is the device address returned by lspci,and ff is a hexadecimal value <0,ff>. I have n210 running Debian, works well
Because it wasn't easy to control brightness this way, I've written a program that adjusts brightness, you can download source from here:
ftp://x.servebeer.com:51300/bright.c
or here:
http://info.wsisiz.edu.pl/~sieluzyc/bright.c
It's a _very simple_ program, but it allows you to increase/decrease brightness by predefinied step, check actual brightness level and set level to a specific value.
It uses the same method that setpci does (write to file in /sys), so plz remember this can be dangerous - use at your own risk.
App does not assign any key shourtcuts, you have to do this manually.
Wcale

Xorg crash in dual monitor (intel video) - Solved

I update my system today, and install xorg-server 1.12.0-1, but xorg crash when gnome-session start.
/var/log/Xorg.0.log output:
[ 202.639] (II) intel(0): Allocated new frame buffer 3840x1080 stride 15360, tiled
[ 202.813] BUG: triggered 'if (!dev->valuator || dev->valuator->numAxes < 2)'
[ 202.813] BUG: getevents.c:843 in scale_to_desktop()
[ 202.813]
[ 202.813] Backtrace:
[ 202.813] 0: /usr/bin/Xorg (xorg_backtrace+0x49) [0x81c3209]
[ 202.813] 1: /usr/bin/Xorg (0x8048000+0x436bd) [0x808b6bd]
[ 202.813] 2: /usr/bin/Xorg (0x8048000+0x441fb) [0x808c1fb]
[ 202.814] 3: /usr/bin/Xorg (GetPointerEvents+0x109) [0x808d649]
[ 202.814] 4: /usr/bin/Xorg (0x8048000+0x16468a) [0x81ac68a]
[ 202.814] 5: /usr/bin/Xorg (miPointerWarpCursor+0xd3) [0x81acac3]
Work fine when only one monitor is connected.
Video is Intel (core i5-2500K).
Last edited by mapintar (2012-04-04 15:12:44)

supermihi wrote:I am experiencing similar problems: Since yesterday's xf86-video-intel upgrade, the display manager does not start if an external monitor is connected. However in my case I don't even get to see a login screen, the X server crashes immediately.
I have tried installing xf86-input-evdev-git from AUR after I found your launchpad link, but unfortunatelly this didn't help. Have you solved the problem yet?
No. I using only one monitor now until the problem is solved.
I googled but could not find any solution.

Cant record in stereo , mono input (aux in) intel ALC270 [Solved]

Hi there, i've been reading the forum but i cannot get the right answer to this issue.
I am trying to capture audio with the microphone input connector.
I tried it using audacity (as i always did with other distros but now is not working) and with this command arecord -vv -fdat foo.wav
The thing is, i always end up with a mono audio file. I see in alsamixer the input/capture connector is stereo, i can see the Left and Right volume levels
but modifing those make no difference.
Something seems to tell the whole system to translate the stereo microphone into a mono microphone or something like that... i am no quiet sure, cause in audacity the recording track shows a stereo track although both channels have the same audio track, the right channel one...
i was using this same computer not long ago with fedora, and for like 2 years with slackware and always worked fine... i've been using archlinux for 4 months now and i came across with this while trying to rip some new cassettes i got.
Thanks in advance for your help pals.
Cheers!
Last edited by federico7979 (2015-04-18 23:34:36)

upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.64
!!Script ran on: Fri Apr 17 11:43:53 UTC 2015
!!Linux Distribution
Arch Linux \r (\l) DISTRIB_ID=Arch DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: K55A
Product Version: 1.0
Firmware Version: K55A.407
!!Kernel Information
Kernel release: 3.19.3-3-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.19.3-3-ARCH
Library version: 1.0.29
Utilities version: 1.0.29
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7e10000 irq 29
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:1b.0 0403: 8086:1e20 (rev 04)
Subsystem: 1043:1457
!!Modprobe options (Sound related)
snd_hda_intel: model=laptop-amic
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : laptop-amic,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : -1
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC270
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0270
Subsystem Id: 0x10431457
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC270 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x57 0x57]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC270 Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x08 0x08]
Converter: stream=4, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x8b 0x8b]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Internal Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Internal Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x17 0x17] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x80]
Connection: 2
0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c 0x0d*
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00001734: IN OUT Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x04a11840: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x0d
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x90a70930: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x40089d2d: [N/A] Line Out at Ext N/A
Conn = DIN, Color = Pink
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=25
Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x04211020: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Connection: 2
0x0c* 0x0d
Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560010: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 2 Apr 17 08:14 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 6 Apr 17 08:14 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Apr 17 08:14 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 4 Apr 17 08:15 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Apr 17 08:39 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 5 Apr 17 08:15 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 17 08:14 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Apr 17 08:14 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Apr 17 08:14 .
drwxr-xr-x 3 root root 220 Apr 17 08:14 ..
lrwxrwxrwx 1 root root 12 Apr 17 08:14 pci-0000:00:1b.0 -> ../controlC0
!!ALSA configuration files
!!System wide config file (/etc/asound.conf)
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC270 Analog [ALC270 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xf7e10000 irq 29'
Mixer name : 'Intel PantherPoint HDMI'
Components : 'HDA:10ec0270,10431457,00100100 HDA:80862806,80860101,00100000'
Controls : 30
Simple ctrls : 12
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 23 [74%] [0.00dB] [on]
Front Right: Playback 23 [74%] [0.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 8 [26%] [-4.50dB] [on]
Front Right: Capture 8 [26%] [-4.50dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!Alsactl output
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Internal Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.6 {
iface MIXER
name 'Internal Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.7 {
iface MIXER
name 'Mic Playback Volume'
value.0 23
value.1 23
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 0
dbvalue.1 0
control.8 {
iface MIXER
name 'Mic Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.9 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.10 {
iface MIXER
name 'Capture Volume'
value.0 8
value.1 8
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -450
dbvalue.1 -450
control.11 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.12 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
control.13 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
control.14 {
iface MIXER
name 'Master Playback Volume'
value 87
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
control.15 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.16 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.17 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.18 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.19 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.20 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.21 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
control.22 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
control.28 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
control.29 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.30 {
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 -3000
dbvalue.1 -3000
--endcollapse--
!!All Loaded Modules
Module
fuse
ctr
ccm
bnep
bluetooth
nls_iso8859_1
nls_cp437
vfat
fat
arc4
brcmsmac
cordic
uvcvideo
brcmutil
videobuf2_vmalloc
coretemp
videobuf2_memops
videobuf2_core
snd_hda_codec_hdmi
v4l2_common
intel_rapl
videodev
iosf_mbi
media
b43
x86_pkg_temp_thermal
snd_hda_codec_realtek
snd_hda_codec_generic
intel_powerclamp
mac80211
kvm_intel
cfg80211
i915
snd_hda_intel
snd_hda_controller
ssb
rng_core
pcmcia
snd_hda_codec
pcmcia_core
snd_hwdep
kvm
r8169
snd_pcm
rtsx_pci_ms
drm_kms_helper
bcma
asus_nb_wmi
drm
asus_wmi
joydev
iTCO_wdt
crct10dif_pclmul
mii
memstick
mousedev
snd_timer
sparse_keymap
snd
crc32_pclmul
iTCO_vendor_support
intel_gtt
soundcore
crc32c_intel
led_class
rfkill
hwmon
shpchp
wmi
i2c_i801
i2c_algo_bit
i2c_core
ghash_clmulni_intel
cryptd
pcspkr
evdev
mac_hid
psmouse
serio_raw
mei_me
mei
lpc_ich
thermal
video
button
ac
processor
battery
sch_fq_codel
nfs
lockd
grace
sunrpc
fscache
ext4
crc16
mbcache
jbd2
sr_mod
cdrom
sd_mod
rtsx_pci_sdmmc
mmc_core
atkbd
libps2
ahci
xhci_pci
libahci
libata
scsi_mod
ehci_pci
rtsx_pci
ehci_hcd
xhci_hcd
usbcore
usb_common
i8042
serio
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x14 0x90170110
0x17 0x411111f0
0x18 0x04a11840
0x19 0x90a70930
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40089d2d
0x1e 0x411111f0
0x21 0x04211020
/sys/class/sound/hwC0D0/driver_pin_configs:
0x14 0x99130110
0x15 0x0121401f
0x18 0x01a19c20
0x19 0x99a3092f
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x58560010
0x06 0x18560020
0x07 0x58560030
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
/sys/class/sound/hwC0D3/hints:
!!ALSA/HDA dmesg
[ 12.098095] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 12.151130] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.151132] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.151134] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.151135] sound hdaudioC0D0: mono: mono_out=0x0
[ 12.151137] sound hdaudioC0D0: inputs:
[ 12.151139] sound hdaudioC0D0: Internal Mic=0x19
[ 12.151141] sound hdaudioC0D0: Mic=0x18
[ 12.294566] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 12.463347] i915 0000:00:02.0: registered panic notifier
[ 12.472923] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.473056] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.473157] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.569375] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b354)
Last edited by federico7979 (2015-04-18 23:04:59)

No Direct Rendering - Intel 915GM [SOLVED]

When it comes to Xorg stuff, I get lost in a hurry. I'm trying to squeeze a little more 3d performance out of this laptop, and while I know I won't get far with the integrated Intel graphics, I've read I can do better than I am getting. Glxgears gets around 650fps. ioUrbanTerror with very low settings gets 10-18 fps.
I think part of the problem is I can't get direct rendering (and no I'm not using compiz/fusion):
$ glxinfo | grep direct
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
Doing export LIBGL_ALWAYS_INDIRECT=0 doesn't fix this. I'd be very appreciative of any suggestions!
HWD -s
HARDWARE DETECT ver 5.3.3 (simple mode)
Kernel : 2.6.24-ARCH
CPU & Cache: Processor 0: Intel(R) Pentium(R) M processor 1.73GHz 1733MHz, 2048 KB Cache
Sound(m) : 82801FB/FBM/FR/FW/FRW ICH6 Family AC'97 Audio Controller module: snd_intel8x0
Video : Mobile 915GM/GMS/910GML Express Graphics Controller server: Xorg (i810)
Driver : xf86-video-i810 module: -
Monitor : Generic Monitor H: 28.0-96.0kHz V: 50.0-75.0Hz
Mouse : Microsoft Corp. Wireless Optical Mouse 3.0 xtype: IMPS2 device: /dev/input/mice
HDD : 82801FB/FBM/FR/FW/FRW ICH6 Family IDE Controller module: ata_piix
USB Storage: PCIxx21 Integrated FlashMedia Controller module: tifm_7xx1
USB : 82801FB/FBM/FR/FW/FRW ICH6 Family USB UHCI #4 module: uhci_hcd
USB2 : 82801FB/FBM/FR/FW/FRW ICH6 Family USB2 EHCI Controller module: ehci_hcd
SD Slot : PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller module: sdhci
Ethernet : RTL8139/8139C/8139C+ module: 8139too
Network : PRO/Wireless 2200BG Network Connection module: ipw2200
Modem : 82801FB/FBM/FR/FW/FRW ICH6 Family AC'97 Modem Controller module: Intel ICH Modem
Firewire : OHCI Compliant IEEE 1394 Host Controller module: ohci1394
PCMCIA slot: PCIxx21/x515 Cardbus Controller module: yenta_cardbus
Menu : Main menu: hwd
All : Detect all hardwares: hwd -e
X sample : Generate X sample: hwd -x
glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
OpenGL version string: 1.3 Mesa 7.0.3-rc2
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_fragment_program, GL_ARB_imaging,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_packed_pixels, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_NV_vertex_program, GL_NV_vertex_program1_1,
GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2c 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2e 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x2f 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x31 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x67 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 Ncon
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "xtrap"
Load "record"
Load "dbe"
Load "dri"
Load "glx"
#Load "type1"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse2"
#Option "Protocol" "auto-dev"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "0"
Option "MaxTapMove" "0"
#Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
#Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.015"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
#Option "UpDownScrolling" "1"
#Option "CircularScrolling" "1"
#Option "CircScrollDelta" "0.1"
#Option "CircScrollTrigger" "2"
Option "SendCoreEvents" "true"
#Option "SHMConfig" "on"
EndSection
Section "Monitor"
DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Option "VideoRam" "131072"
#Option "CacheLines" "1980"
Option "CacheLines" "1024"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
Option "LinearAlloc" "8160"
#Xtras
Option "AccelMethod" "EXA"
Option "ExaNoComposite" "false"
Option "EXANoUploadToScreen" "true"
Option "MigrationHeuristic" "greedy"
#Option "EnablePageFlip" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480" "320x240"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "GLX" "Enable"
#Option "RENDER" "true"
EndSection
Section "DRI"
#Group 0
Mode 0666
EndSection
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux amstel 2.6.24-ARCH #1 SMP PREEMPT Sun Mar 30 11:40:06 CEST 2008 i686
Build Date: 23 March 2008 11:53:09AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 31 11:01:54 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "GLX" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d77c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 103c,3081 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2592 card 103c,3081 rev 04 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2792 card 103c,3081 rev 04 class 03,80,00 hdr 80
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 103c,3081 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 103c,3081 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 103c,3081 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 103c,3081 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 103c,3081 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 103c,3081 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 103c,3081 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 103c,3081 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 103c,3081 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 103c,3081 rev 04 class 0c,05,00 hdr 00
(II) PCI: 06:05:0: chip 8086,4220 card 103c,12f5 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 104c,8031 card 3400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:06:2: chip 104c,8032 card 103c,3081 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:06:3: chip 104c,8033 card 103c,3081 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:06:4: chip 104c,8034 card 103c,3081 rev 00 class 08,05,00 hdr 80
(II) PCI: 06:07:0: chip 10ec,8139 card 103c,3081 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xb0100000 - 0xb01fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:6:0), (6,7,10), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[1] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xb0080000/19, 0xc0000000/28, 0xb0000000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0x50000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[1] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[2] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[3] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[4] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[5] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[6] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[7] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[8] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[9] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[10] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[11] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[14] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[15] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[16] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[1] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[2] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[3] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[4] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[5] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[6] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[7] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[8] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[9] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[10] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[11] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[14] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[15] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[16] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[5] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[6] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[7] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[8] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[9] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[10] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[11] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[18] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[22] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[23] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[29] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[30] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[31] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[5] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[6] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[7] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[8] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[9] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[10] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[11] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[18] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[22] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[23] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[29] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[30] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[31] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[5] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[6] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[7] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[8] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[9] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[10] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[11] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[18] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[25] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[26] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[32] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[33] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[34] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[35] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[36] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[37] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[38] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[39] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "EXA"
(**) intel(0): Option "CacheLines" "1024"
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xB0080000
(II) intel(0): 2 display pipes available.
(**) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0): EDID quirk: Detailed timings give horizontal size in cm.
(II) intel(0): EDID quirk: Detailed timings give sizes in cm.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0): EDID quirk: Detailed timings give horizontal size in cm.
(II) intel(0): EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing on
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00020000 to 0x00020207
(WW) intel(0): PIPEASTAT before: status: VBLANK_INT_ENABLE
(WW) intel(0): PIPEASTAT after: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xb0000000 - 0xb003ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xb0080000 - 0xb00fffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[8] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[9] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[10] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[11] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[12] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[13] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[14] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[15] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[16] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[17] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[18] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[19] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[20] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[21] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[22] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[23] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[24] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[25] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[29] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[30] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[36] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[37] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[38] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[39] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[40] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[41] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[42] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[43] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[44] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[45] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Requested 1024 cache lines
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(II) intel(0): [drm] Registers = 0xb0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(**) intel(0): Option "EXANoComposite" "false"
(**) intel(0): Option "EXANoUploadToScreen" "true"
(II) intel(0): EXA: Disabling Composite operation (RENDER acceleration)
(II) intel(0): EXA: Disabling UploadToScreen
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc enabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 22
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "VideoRam" is not used
(WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "LinearAlloc" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad auto-dev sets device to /dev/input/event10
(**) Option "Device" "/dev/input/event10"
(**) Option "LeftEdge" "120"
(**) Option "RightEdge" "830"
(**) Option "TopEdge" "120"
(**) Option "BottomEdge" "650"
(**) Option "VertScrollDelta" "20"
(**) Option "EdgeMotionMinSpeed" "200"
(**) Option "EdgeMotionMaxSpeed" "200"
(**) Option "FingerLow" "14"
(**) Option "FingerHigh" "15"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "0"
(--) Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) Touchpad: always reports core events
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Touchpad)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event10
(**) Option "Device" "/dev/input/event10"
(--) Touchpad touchpad found
Last edited by Tido (2008-04-05 05:57:17)

Thanks for answering, schivmeister! Sadly, it hasn't changed things much.
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
#Option "AIGLX" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Subsection "extmod"
Option "omit xfree86-dga"
EndSubsection
Load "xtrap"
Load "record"
Load "dbe"
Load "dri"
Load "glx"
#Load "type1"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse2"
#Option "Protocol" "auto-dev"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "0"
Option "MaxTapMove" "0"
#Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
#Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.015"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
#Option "UpDownScrolling" "1"
#Option "CircularScrolling" "1"
#Option "CircScrollDelta" "0.1"
#Option "CircScrollTrigger" "2"
Option "SendCoreEvents" "true"
#Option "SHMConfig" "on"
EndSection
Section "Monitor"
DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "LPL"
ModelName "0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
#Driver "i810"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
#Option "VideoRam" "131072"
#Option "CacheLines" "1980"
#Option "CacheLines" "1024"
#Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
#Option "LinearAlloc" "8160"
#Xtras
#Option "AccelMethod" "XAA"
#Option "ExaNoComposite" "false"
#Option "EXANoUploadToScreen" "true"
#Option "MigrationHeuristic" "greedy"
#Option "EnablePageFlip" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480" "320x240"
EndSubSection
EndSection
Section "Extensions"
#Option "Composite" "Enable"
Option "GLX" "Enable"
#Option "RENDER" "true"
EndSection
Section "DRI"
#Group 0
Mode 0666
EndSection
(logout, restart x, login)
$ glxinfo | grep direct
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
$ glxinfo | grep render
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
OpenGL renderer string: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686
Current Operating System: Linux amstel 2.6.24-ARCH #1 SMP PREEMPT Sun Mar 30 11:40:06 CEST 2008 i686
Build Date: 23 March 2008 11:53:09AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 1 10:25:30 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "GLX" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d77c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 103c,3081 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2592 card 103c,3081 rev 04 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2792 card 103c,3081 rev 04 class 03,80,00 hdr 80
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 103c,3081 rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 103c,3081 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 103c,3081 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 103c,3081 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 103c,3081 rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 81
(II) PCI: 00:1e:2: chip 8086,266e card 103c,3081 rev 04 class 04,01,00 hdr 00
(II) PCI: 00:1e:3: chip 8086,266d card 103c,3081 rev 04 class 07,03,00 hdr 00
(II) PCI: 00:1f:0: chip 8086,2641 card 103c,3081 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 103c,3081 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 103c,3081 rev 04 class 0c,05,00 hdr 00
(II) PCI: 06:05:0: chip 8086,4220 card 103c,12f5 rev 05 class 02,80,00 hdr 00
(II) PCI: 06:06:0: chip 104c,8031 card 3400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 06:06:2: chip 104c,8032 card 103c,3081 rev 00 class 0c,00,10 hdr 80
(II) PCI: 06:06:3: chip 104c,8033 card 103c,3081 rev 00 class 01,80,00 hdr 80
(II) PCI: 06:06:4: chip 104c,8034 card 103c,3081 rev 00 class 08,05,00 hdr 80
(II) PCI: 06:07:0: chip 10ec,8139 card 103c,3081 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xb0100000 - 0xb01fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (6:6:0), (6,7,10), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[1] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0xb0080000/19, 0xc0000000/28, 0xb0000000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller rev 4, Mem @ 0x50000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[1] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[2] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[3] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[4] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[5] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[6] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[7] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[8] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[9] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[10] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[11] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[14] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[15] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[16] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[1] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[2] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[3] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[4] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[5] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[6] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[7] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[8] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[9] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[10] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[11] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[12] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[13] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[14] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[15] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[16] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[20] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[21] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[22] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[24] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[5] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[6] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[7] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[8] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[9] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[10] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[11] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[18] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[22] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[23] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[29] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[30] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[31] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "extmod"
(II) Reloading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[5] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[6] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[7] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[8] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[9] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[10] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[11] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[18] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[22] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[23] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[29] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[30] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[31] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[32] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[33] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[34] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[35] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[36] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[5] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[6] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[7] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[8] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[9] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[10] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[11] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[12] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[13] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[14] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[15] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[17] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[18] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[25] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[26] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[32] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[33] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[34] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[35] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[36] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[37] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[38] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[39] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[41] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) intel(0): Chipset: "915GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xB0080000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0): EDID quirk: Detailed timings give horizontal size in cm.
(II) intel(0): EDID quirk: Detailed timings give sizes in cm.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 0
(II) intel(0): EDID quirk: Detailed timings give horizontal size in cm.
(II) intel(0): EDID quirk: Detailed timings give sizes in cm.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing on
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x8000085e to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xb0000000 - 0xb003ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xb0080000 - 0xb00fffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xb0109400 - 0xb01094ff (0x100) MX[b]
[8] -1 0 0xb0108800 - 0xb01088ff (0x100) MX[b]
[9] -1 0 0xb0108c00 - 0xb0108cff (0x100) MX[b]
[10] -1 0 0xb0109000 - 0xb01090ff (0x100) MX[b]
[11] -1 0 0xb0104000 - 0xb0105fff (0x2000) MX[b]
[12] -1 0 0xb0100000 - 0xb0103fff (0x4000) MX[b]
[13] -1 0 0xb0108000 - 0xb01087ff (0x800) MX[b]
[14] -1 0 0xb0106000 - 0xb0106fff (0x1000) MX[b]
[15] -1 0 0xb0040400 - 0xb00404ff (0x100) MX[b]
[16] -1 0 0xb0040800 - 0xb00409ff (0x200) MX[b]
[17] -1 0 0xb0040000 - 0xb00403ff (0x400) MX[b]
[18] -1 0 0xb0000000 - 0xb003ffff (0x40000) MX[b](B)
[19] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[20] -1 0 0xb0080000 - 0xb00fffff (0x80000) MX[b](B)
[21] -1 0 0x50000000 - 0x5007ffff (0x80000) MX[b](B)
[22] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[23] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[24] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[25] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[28] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[29] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[30] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x00002000 - 0x0000207f (0x80) IX[b]
[36] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[37] -1 0 0x000018c0 - 0x000018ff (0x40) IX[b]
[38] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
[39] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[40] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[41] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[42] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[43] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[44] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[45] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(II) intel(0): [drm] Registers = 0xb0080000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000003f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000003fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000003fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000003fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc enabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 22
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "AllowGLXWithComposite" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad auto-dev sets device to /dev/input/event10
(**) Option "Device" "/dev/input/event10"
(**) Option "LeftEdge" "120"
(**) Option "RightEdge" "830"
(**) Option "TopEdge" "120"
(**) Option "BottomEdge" "650"
(**) Option "VertScrollDelta" "20"
(**) Option "EdgeMotionMinSpeed" "200"
(**) Option "EdgeMotionMaxSpeed" "200"
(**) Option "FingerLow" "14"
(**) Option "FingerHigh" "15"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "0"
(--) Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) Touchpad: always reports core events
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Touchpad)
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad auto-dev sets device to /dev/input/event10
(**) Option "Device" "/dev/input/event10"
(--) Touchpad touchpad found

Configure a intel i915 (Solved)

I need help to configure a intel i915 chipset, I installed the 3ddesktop package, and the command "3ddesk" gives me this message:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Daemon started. Run 3ddesk to activate.
Server not found after waiting 5 seconds.
Could not find server.
Try starting manually (3ddeskd)
Then I tried with "3ddeskd" and got:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Daemon started. Run 3ddesk to activate.
And so it goes and goes, then the command glxgears gives me this other message:
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual
So, I guess my card is not configured properly, so how can I make it work on xorg 7?
this is my xorg.conf:
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "latam"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mouse0"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "HPvs15"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5, 35.15, 35.5
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** Intel i810 (generic) [i810]"
Driver "i810"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** Intel i810 (generic) [i810]"
Monitor "HPvs15"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
[/list]

Here's a copy of my Xorg.conf designed for i810/i910, just copy the contents over your xorg.conf (make backup!!) and adjust it to your needs (u may want to change the keyboard layout)
This xorg conf work with nomal as well as Xinerama by doing
startx -- -layout Xinerama
:arrow: http://arch.pastebin.com/613767

Glxgears run as root increases performance on Intel 945G [SOLVED]

I ran glxgears as normal user and fullscreen fps was 16.4.
I ran it as root and fullscreen fps was 126.2.
Here are the exact commands in order:
$ glxgears
$ su
# glxgears
I did nothing between the commands. Does anybody know why?
Last edited by Lexion (2009-06-13 11:31:02)

You can also add your useraccount to the video group, as the devices are created as root:video, 660. Without DRI, all your rendering operations have to go through AIGLX, which is another abstraction layer to pass before you get to the hardware.

945GT Speedster-A4R virtualization support

Hello,
Does anyone know if the 945GT Speedster-A4R BIOS supports virtualization (Intel VT-x)?

Quote from: Bas on 16-December-10, 19:48:13
Did you check if it did?
I don't have the board (that is the reason I am asking - I could buy one but I need virtualization to work). I have googled and couldn't find anything for or against it. The BIOS section on the manual does not show anything relating to Vanderpool or Intel VT or VT-x etc. BIOS release notes didn't mention virtualization.
So, that's why I asked the question here.

B590 (20208) BIOS update/version

I recently bought a B590 Notebook (20208) that shows installed BIOS as H5ET69WW (1.12), running Windows 7 Pro 64-bit SP1. When I run the BIOS Update Utility for Windows 7 (32-bit, 64-bit) - Lenovo B490, B590 I get the message: "BIOS image file is older than BIOS ROM. Do you want to continue?", which I have not
In what may be a related issue, enabling Hardware Assisted Virtualization (Intel VT) in my BIOS does not seem to take effect in my system. (And yes, I have changed the setting with a cold boot.)
How or where can I find out exactly which BIOS version I should have on my machine? (I've looked everywhere to no avail.)
Lenovo Essentials B590 (20208), Windows 7 Professional SP1
I blog, therefore I am

neokenchi, thank you for the reply. As it turns out, the VT issue was not directly related to the BIOS version, as a clean W7 install from a Lenovo recovery disk solved that particular problem. The o/s still won't recognize VT if memory protection is enabled in the BIOS, but I can live with that disabled.
It was the VT issue that led me to wonder if I had the right BIOS for my machine, as there is a possibilty that the BIOS may have been changed somewhere along the line after it left Lenovo. Coupled with the fact that the most recent version on the Lenovo download page for my model is older than the one I have (which seemed unusual), that led to my concern, and my original question here.
Since then, at the suggestion of a Lenovo hardware support specialist, I did attempt to flash the update availabe from Lenovo (making sure to disable rollback prevention in the BIOS), which failed from both the BIOS update utility in Windows and the ISO version on a CD, with the following messages (without making any changes to the BIOS):
exe version: Invalid file when SecureFlash is on in ROM
iso version: The system program file is damaged
So I remain with the BIOS that was on my machine when I bought it, and while everything seems to be working well, I am still wondering if there is any way to find out the BIOS version (by which I mean the full BIOS definition, not the 1.12) that was shipped, in case any further issues arise in the future.
Lenovo Essentials B590 (20208), Windows 7 Professional SP1
I blog, therefore I am

64bit guest

I have a recent w520 laptop 64bit with windows7 64b prof edition
when I try to open a virtual machine in vmware player it indicates that my machine does not support 6b guest os
there is a compat tool available at vmware-but you a cusnbr to get it
is this machine supported for 64b guest os ?
if yes, how can this be activated
the message is that without long mode enabled you are not able to run 64b guest os
thanks for all update/reply
best regards, Guy
Solved!
Go to Solution.

Hello and welcome,
Have you enabled virtualization in BIOS? Security->virtualization->intel virtualization technology.
It's probabaly necessary to do a full power off - power on reboot before the OS and apps will recognize that it's turned on.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Iphone 3GS will not sync with Windows

I could not get it to sync and the dealer then told me it does not work with Windows 7 so I am returningd it and the other stuff I bought from the apple store and cancelled my order for another one and 2 new macs. The dealer was not too worried. Apple must have so many customers that they do not have to worry about new ones, nice business. Misrepresentation of a products capabilities is one day going to cost them though in my experience. I have bought a 3 ipods which did actually work. iPhone is a product that does not work with Windows 7 and a 1 year old laptop and in the year 2009 that is almost unbelievable and should be told to consumers before they buy and struggle and then realise they have been sold a dud.

I think you are mixing things up. This is a patch supplied by Intel to motherboards and BIOS (BASIC INPUT OUTPUT SYSTEM) manufacturers who based their newest motherboards on Intel P55 chipset. To get this fix you update your BIOS. The BIOS is independent of any operating system (it comes with the motherboards already flashed). Has nothing to do with Apple or Microsoft.
here is a link
A few days ago we had reported a problem with iTunes sync between the iPhone and PCs equipped with Windows 7 of the Intel P55 chipset. Intel released a patch that solves this problem within seconds. You can download the patch here and then start the installation. Restart your computer and you will see all your sync problems are solved.
NOTE: If your computer doesen’t feature the specs above, do not install the patch. Otherwise, happy syncing….
http://www.funkyspacemonkey.com/intel-patch-solve-iphone-sync-pcs-equipped-windo ws-7-p55-chipset

ETax Module - Problems displaying in req, PO, invoice, Payment, reports...

Hi,
We are in the midst of a 12.1.1 implementation and we have encountered a significant problem with Oracle eTax module.
Are there others that are encountered problems we are faced with?
1. Currently eTax information is not displayed on any existing requisitions, purchase order, receiving, invoice, payment, reports or forms.
2. eTax distinct tax accounts are not being applied to every transaction
3. eTax has rounding errors, when processing small amounts having multiple distirbutions.
4. eTax information is only generated on purchasing document, after accessing the Tools bar and selecting, 'Manage Tax'. If you don't do this step no taxes are applied.
This is just a fluke or am I in the same boat as everyone else?
Thank you in advance for your comments, advice and expert opinion.
John

11Albert11 wrote:
bpont wrote:I am having similar problems...not sure if it's related, but have a look at my post: https://bbs.archlinux.org/viewtopic.php?pid=1253942
We have the same Intel Chip Maybe some problem with the driver or de dri I'll try the SNA method to se if it helps.
Using SNA in 20-intel.conf solved my problem, I see the desktop and programs right and I have Slim login back. But now I have another problem flash content in firefox is displaying weird and I think is not a flash problem because it happens in Chromium too.

No internet connection on either x64/x86 flavor on Windows 10 -- Missing Sockets entries as well.

Hi all,
I was referred here from http://answers.microsoft.com site, by a Microsoft Support Engineer....
I had (and still have virtual-box). I have installed yesterday the VMware workstation as well (which apparently is not compatible with Hyper-V.
I've installed both Windows10 Preview flavors under HYPER-V. On either one, I cannot connect to the internet (and thus activate either). The x64bit says it's missing files needed (I've
checked detailed view, it points to "missing windows sockets registry entries" and has 2 "?" marks under Device manager (one of which is the acpi) - Even after a fresh, SECOND, install.
The x86 flavor, says i do not have valid ip. (I had to make local user account because of the no internet access). I went through the defaults while installing
(no motherboards drivers have been asked to be installed). This is a Desktop computer with wired high-band routers.
Can anyone suggest a solution for the connection? (I now obviously also have the external switch and is is connected and i can surf on the primary Win8.1 OS).
Do I really need BOTH VMware and Hyper-V installed / Which one is better for this specific problem..
ANY help will be greatly appreciated.
Update:
I've took off Hyper-V completely. Re-stared, Tried to set it up under VMware workstation, got the same results. Either "no valid ip", or missing sockets. (Vmware adapter is enables, but no connection in either ipv4 and
ipv6. Exactly the same
happens with Hyper-V.
With Utmost Respect,
The motherboard is MSI. The CPU is I-7. 6GB ram avail.
Kind Regards,
Me.
Update 2:
Problem resolved. Here's what i did:
Completely removed the Hyper-V platform from Windows Featured. Then rebooted.
(Vmware services are still running but with no usage for now).
Opted in the Enable PAE/NX under system/Processor tab in VirtualBox.
Opted in the Enable VT-x/AMD-V & Nested Paging under system/Acceleration tab in VirtualBox.
Created the Virtual PC as VHD!!
Both of the above -- are grayed out when the Hyper-V platform is installed and therefor will NOT allow Windows 10 Preview to either install well or connect and activate - until the Hyper-V is removed.
Seems that taking OFF the native, built in Hyper-V Virtualization Platform altogether - Solved the issue.
Just shows that the respectable VirtualBox (v.4.3.12),
Works like a charm where the other two platforms, Did not. (Kindly note that the Hyper-V Switch, was installed with no evadent issues, it did show traffice - for a few seconds, then remained enabled BUT both IPv4 & IPv6 went to no connection).
Windows managed to successfully Connect and auto activate -- on both x86 & x64 flavors.

Use this set of drivers and put on FAT Flash memory card to access.
They will work and better due to your having a 2011 model you should consider Lion OS eventually.
Can't locate? the Apple Setup.exe or Bootcamp.msi (Bootcamp64.msi for 64-bit) will only be accessible when in Windows.
http://www.apple.com/support/bootcamp

Oracle10g on linux

Hi,
I am having dual boot on my PC for xp and linux.
I have installed oracle 10g on xp.
Now My question is :
1.Can I access oracle from Linux operating system with sql commands and throughshell.
2.Is it required me ti install separate oracle10 db on linux again to access it.
3.where I will get the detail information of installing oracle on linux(version Fedora 6) and what sort of precaution
required ?
Bye....
Thanks in advance !!!

Hi user10619253!
Normally it is possible to access an oracle database running on XP from Linux. But I wonder if this will work with a dual boot configuration!?! You can boot ether Windows or Linux but not both. So if windows is running with your DB your Linux is not and if Linux is running windows is not. Use vmware/vbox or any other virtualization software to solve this problem. This should the answer to your question number 1 and 2 (yes you have to install oracle separate on Linux if you want to access it from linux without virtualization).
To you question number 3. Detailed information about installing Oracle 10g R2 on Linux is posted here:
Link:[http://www.oracle.com/technology/pub/articles/smiley_10gdb_install.html]
Hope that helps!
yours sincerely

Cant install Windows as PVM - Linux works properly

I am playing recently witn OVM 3.1.1.
Everything is fine LInux (RedHat, Oracle Enterprise LInux) was installed properly using PVM emulation using ftp as mountpoint for iso images - like in documentation.
I can't emulate virtual machines as HVM because this serwer which i am using have not posess hardware emulation (IBM x3950).
So i need to execute virtual machines as PVM, and install operating systems using nfs, http, ftp. I chosed ftp.
And VM prepared for Windows2003 cant execute and is not able get files from shared ftp.
I am constantly getting error:
------------> stderr: Error: Boot loader didn't return any data!
This VM prepared for Windows2003 for sure connecting to my ftp because i can see this in log. After starting VM there is about 12 connections to my ftp, but after this VM shuts down with information above.
Please help me with this issue.
I was digging on google to search info how can i install Windowses on OVM as PVM emulation - there is no info at all about this.
this is my full log
======================================================
Job Construction Phase
begin()
Appended operation 'Virtual Machine Start' to object '0004fb0000060000d20dc544a8f314d9 (lin2)'.
Appended operation 'Bridge Configure Operation' to object '0004fb00002000002ab966f7419cc8dc (network.BondPort (1) in ovm31)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [VirtualMachine] 0004fb0000060000d20dc544a8f314d9 (lin2)
Operation: Virtual Machine Start
Object (IN_USE): [Vnic] 0004fb0000070000d360b83f5e017313 (00:21:f6:01:01:08)
Object (IN_USE): [VmDiskMapping] 0004fb000013000021196e7ca9047f8f
Object (IN_USE): [BondPort] 0004fb00002000002ab966f7419cc8dc (network.BondPort (1) in ovm31)
Operation: Bridge Configure Operation
Object (IN_USE): [VirtualDisk] 0004fb0000120000d9ef1c114a834c7b.img (disk2)
Job Running Phase at 02:33 on Tue, Jul 3, 2012
Job Participants: [00:14:5e:7b:00:20:00:14:5e:7b:00:21:00:0e:0c:bd (ovm31)]
Actioner
Starting operation 'Virtual Machine Start' on object '0004fb0000060000d20dc544a8f314d9 (lin2)'
Completed operation 'Virtual Machine Start' completed with direction ==> LATER
Starting operation 'Bridge Configure Operation' on object '0004fb00002000002ab966f7419cc8dc (network.BondPort (1) in ovm31)'
Bridge [149.223.33.0] already exists (and should exist) on interface [bond0] on server [ovm31]; skipping bridge creation
Completed operation 'Bridge Configure Operation' completed with direction ==> DONE
Starting operation 'Virtual Machine Start' on object '0004fb0000060000d20dc544a8f314d9 (lin2)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ovm31 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000fdf039a8d28cc61c 0004fb0000060000d20dc544a8f314d9, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg'] failed (1): stderr: Error: Boot loader didn't return any data!
stdout: Using config file "/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg".
Tue Jul 03 02:33:30 EDT 2012
Tue Jul 03 02:33:30 EDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAsyncAction(ManagedObjectDbImpl.java:999)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAsyncAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:596)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000fdf039a8d28cc61c 0004fb0000060000d20dc544a8f314d9, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg'] failed (1): stderr: Error: Boot loader didn't return any data!
stdout: Using config file "/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg".
Tue Jul 03 02:33:30 EDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 40 more
FailedOperationCleanup
Starting failed operation 'Virtual Machine Start' cleanup on object 'lin2'
Complete rollback operation 'Virtual Machine Start' completed with direction=lin2
Rollbacker
Executing rollback operation 'Virtual Machine Start' on object '0004fb0000060000d20dc544a8f314d9 (lin2)'
Complete rollback operation 'Virtual Machine Start' completed with direction=DONE
Executing rollback operation 'Bridge Configure Operation' on object '0004fb00002000002ab966f7419cc8dc (network.BondPort (1) in ovm31)'
Complete rollback operation 'Bridge Configure Operation' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [VirtualMachine] 0004fb0000060000d20dc544a8f314d9 (lin2)
Object (IN_USE): [Vnic] 0004fb0000070000d360b83f5e017313 (00:21:f6:01:01:08)
Object (IN_USE): [VmDiskMapping] 0004fb000013000021196e7ca9047f8f
Object (IN_USE): [BondPort] 0004fb00002000002ab966f7419cc8dc (network.BondPort (1) in ovm31)
Object (IN_USE): [VirtualDisk] 0004fb0000120000d9ef1c114a834c7b.img (disk2)
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=4190 method=addTransactionIdentifier accessLevel=6
Class=VirtualMachineDbImpl vessel_id=3717 method=start accessLevel=6
Class=VnicDbImpl vessel_id=1974 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=3738 method=lock accessLevel=6
Class=VnicDbImpl vessel_id=1974 method=lock accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=3745 method=lock accessLevel=6
Class=VirtualDiskDbImpl vessel_id=3738 method=lock accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=4199 method=notify accessLevel=6
Class=VirtualMachineStartingEventDbImpl vessel_id=4199 method=setDescription accessLevel=6
Class=BondPortDbImpl vessel_id=573 method=addJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=4190 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=4190 method=setAssociatedHandles accessLevel=6
Class=InternalJobDbImpl vessel_id=4190 method=setTuringMachineFlag accessLevel=6
Class=VirtualMachineDbImpl vessel_id=3717 method=setCurrentOperationToLater accessLevel=6
Class=InternalJobDbImpl vessel_id=4190 method=setTuringMachineFlag accessLevel=6
Class=BondPortDbImpl vessel_id=573 method=setCurrentJobOperationComplete accessLevel=6
Class=BondPortDbImpl vessel_id=573 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=3717 method=nextJobOperation accessLevel=6
Class=InternalJobDbImpl vessel_id=4190 method=setFailedOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=3717 method=nextJobOperation accessLevel=6
Class=VnicDbImpl vessel_id=1974 method=nextJobOperation accessLevel=6
Class=VmDiskMappingDbImpl vessel_id=3745 method=nextJobOperation accessLevel=6
Class=BondPortDbImpl vessel_id=573 method=nextJobOperation accessLevel=6
Class=VirtualDiskDbImpl vessel_id=3738 method=nextJobOperation accessLevel=6
Class=VirtualMachineDbImpl vessel_id=3717 method=nextJobOperation accessLevel=6
Class=BondPortDbImpl vessel_id=573 method=nextJobOperation accessLevel=6
Completed Step: ROLLBACK
Job failed commit (internal) due to OVMAPI_4010E Attempt to send command: dispatch to server: ovm31 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000fdf039a8d28cc61c 0004fb0000060000d20dc544a8f314d9, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg'] failed (1): stderr: Error: Boot loader didn't return any data!
stdout: Using config file "/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg".
Tue Jul 03 02:33:30 EDT 2012
Tue Jul 03 02:33:30 EDT 2012
com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ovm31 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000fdf039a8d28cc61c 0004fb0000060000d20dc544a8f314d9, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg'] failed (1): stderr: Error: Boot loader didn't return any data!
stdout: Using config file "/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg".
Tue Jul 03 02:33:30 EDT 2012
Tue Jul 03 02:33:30 EDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.VirtualMachineAction.sendStartVmCommand(VirtualMachineAction.java:121)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.asyncAction(VirtualMachineStart.java:65)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAsyncAction(ManagedObjectDbImpl.java:999)
at sun.reflect.GeneratedMethodAccessor1664.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAsyncAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:596)
at com.oracle.ovm.mgr.op.virtual.VirtualMachineStart.action(VirtualMachineStart.java:52)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
at sun.reflect.GeneratedMethodAccessor1241.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.virtual.VirtualMachineProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at sun.reflect.GeneratedMethodAccessor1132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 start_vm 0004fb0000030000fdf039a8d28cc61c 0004fb0000060000d20dc544a8f314d9, Status: org.apache.xmlrpc.XmlRpcException: exceptions.RuntimeError:Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg'] failed (1): stderr: Error: Boot loader didn't return any data!
stdout: Using config file "/OVS/Repositories/0004fb0000030000fdf039a8d28cc61c/VirtualMachines/0004fb0000060000d20dc544a8f314d9/vm.cfg".
Tue Jul 03 02:33:30 EDT 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 40 more
End of Job
----------

Hello again,
As I said before, the only way to properly run (and also install) a Windows virtual machine under Oracle VM (2.x, 3.x) requires Hardware Virtualization (Intel VT-x or AMD-V).
Check again the link you have provided, right after the table that list the supported Guest OS the following line is displayed:
*"Paravirtualization support for RHEL 3.x and Windows 2008/2003/7/Vista/XP are paravirtualized device drivers only"*
This means that you first need to create and install a Windows HVM using an ISO or a Template both previously imported to your repository. You can't boot a HVM (any OS) using a NFS share or HTTP/FTP server. (You are running a HVM Windows Guest at this point).
Then after the Windows OS is installed, you can install inside the Windows Guest the Oracle Paravirtualized device drivers (_this is optional_) which in almost all cases increase the performance of a Windows Guest running in an Oracle VM enviroment. (You are running a PVHVM Windows Guest at this point, PVHVM stands for Hardware virtualized machine using paravirtualized drivers).
As you can see, both cases for running a Windows Guest in Oracle VM (HVM or PVHVM) requires Hardware Virtualization.
Harim Márquez

Y530 virtualization (Intel VT) [SOLVED]

Similar Messages

Maybe you are looking for