Yahoo account no longer shows conversations after upgrading to 8.3

Prior to 8.3, past Yahoo conversations showed up in folder on  Yahoo account screen.  No longer.  How do I recapture this info

Hi,
“For parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and
restore your data.”
I’d like to share the following article with you for reference:
Storage Spaces Frequently Asked Questions
(Pay attention to this part:How do I prepare Storage Spaces for upgrading from the Windows 8 Consumer Preview to Windows 8 Release Preview?)
http://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#How_do_I_prepare_Storage_Spaces_for_upgrading_from_the_Windows_8_Consumer_Preview_to_Windows_8_Release_Preview
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • A username no longer shows up after restart

    For some reason, a username no longer shows up after restart.  I have to login with another account, and then logout of that account.  After logout (but not restart) the username shows up!  any ideas?

    Actually, while looking into your suggestions, I figured out what the problem was.
    I had FileVault encryption turned on, and noticed on a FileVault preferences dialog popup that the user that wasn't showing up was not enabled to decrypt the drive.  Thus, I had to login with an Admin user account (to decrypt the drive), logout, and then the user could login.
    I turned FileVault off (since I no longer really needed it), and then the user account showed up.  I suspect that enabling that user account to decrypt the FileVault drive would have worked as well.
    Thanks for the tips, nonetheless!

  • Unicode conversion  after upgrade

    I am well aware that sap recommends to convert  to unicode first before converting to 2004s. however  does anyone know what any consiequences would be of waiting to do it until after ther upgrade. Our landscape is very simple, we do not plan to immediately integrate new tools, and we don't have the abundance of code pages someone here mentioned (nor do we use foreign currencies). so with that said, are there any known consequences to simply doing the unicode conversion  after upgrading from 3 to BI7?

    > Let's take the system user table for example:
    > (USER, NAME , SURNAME, ADDRESS).
    >
    > USER1 | שלום | עליכם | יקרים |
    > USER2 | %%$% | אלי | #$$%#$ |
    > USER3| #$%#$% | $##%$#%| $#%#$$%%#
    I would say that those entries were not correctly specified in your vocabulary as being Hebrew - OR
    Addresses have another speciality, they have a "creation language" field (LANGU_CREA). That field may be wrong filled if you e. g. create the user with an english logon and then change the user data to Hebrew (with Hebrew characters). The entry in the LANGU_CREA field however stays english. If you use that field now to decide the conversion of the addresse it will be converted wrong and you see gibberish.
    Markus

  • Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

  • THE TOOLS MENU NO LONGER SHOWS "OPTIONS" AFTER I UPGRADED TO FIREFOX 5

    When I click on the Tools menu, the drop down menu has blanks after "Web Search", "Set Up Sync", and "Page Info". "Options" used to be in one of those spots, and Options no longer shows. I am running a MacBook Pro with Mac OS X Version 10.6.8. I'm running Firefox 5 and the "About Firefox" menu item says that my version is up to date.

    On Mac, you should find the options under
    Firefox > Preferences

  • Yahoo Calendars entries created on Yahoo do not sync on iphone after upgrad

    After upgrading to IOS4, any previous or new calendar entries that have been created on the web in Yahoo calendars do not appear on the iphone. However, if you create a new yahoo calendar entry on the iphone then it appears without any problem in yahoo calendars (and also is removed if you delete from the iphone).
    The calendar is turned on correctly in Mail, Contacts, Calendars for the Yahoo accounts I have and I have even deleted and re-created the accounts on the iphone to see if that makes a difference and it does not.
    Prior to the upgrade to iOS4, the yahoo calendars all worked fine.
    Any ideas

    To fix yahoo calendars then do the following:-
    To reset, go to Settings, Mail, Contacts, Calendar. In this menu, go to "Calendars" options which is near the bottom. In the Sync categories change the setting from "*All Events*" to "*Events 6 Months Back*". Go to the calendar app and it should now Sync all of your Yahoo calendars. Go back to settings and change Sync settings back to "All Events" and they should all still appear.
    Also, for each yahoo account, go into them and make sure that Calendars is set to on.

  • Old Sales Orders Shows Incomplete- after Upgrade

    Dear SAP gurus,
    We have recenlty upgraded to ECC6 from 4.6B, the process is working smootly , except that Old partially delivered orders transferred from 4.6B . While delivering those partially delivered sales order are showing as Incomplete for Account determination even for already delivered items.
    In 4.6 B one of the account key was not assigned to any G/L yet there was no problem in account determination. There are no account determination problems in the new sales order created after upgradation.
    Please advice how to deliver those partially delivered Sales Order? (which are already invoiced). Its a bit urgents can any Gurus pls help?
    Thanks in advance
    Praveen
    Edited by: Praveen Dias on Jun 20, 2008 8:11 AM

    Hi,
    If you are sure that you have checked everything like Copy control for item VTLF, and VTLA for update document flow, then run report SDVBUK00 for manual update.
    Please post your feedback for further help.
    Thanks,
    Raja

  • Texts are not showing up after upgrading to version 11

    Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
    Before (version 10.3.183.7...)
    After (version 11.0.1.152...)
    The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
    Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
    You will see the changes with Flash player version 11, and everything working fine with older versions.
    I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

    This is a known issue and we have a fix for this in our next release. Thanks for posting.

  • HT201365 I have 2 email accounts in my phone.  After upgrading when I open email, both accounts are combined under "All Inboxes".How can I seperate them like they were before the upgrade.

    I have 2 email accounts in my phone.  A gmail acct and an Outlook acct.  After upgrading to 7 there is only 1 inbox and it is titled "All Inboxes".  This has combined both email accts into one list.  How do I seperate the inboxes and be able to open each account seperate?

    In Mail app, on the upper left side you will see  <Mailboxes Click on that and you can select individual email acounts or choose to have them all in one.

  • Can no longer dual boot after upgrade

    Hi I used to run mac osx 10.7 dual booting with ubuntu 13.04. I used to press alt at startup to view the different partitions and select the appropriate OS. After upgrading to 10.9 I can no longer see the ubuntu partition when pressing alt. The disk is still there intact, but there is no way I can directly boot to it from startup. I tried creating another partition using disk utility and installing a fresh copy of linux and using the old linux partition as backup but whenever I select the ex-fat (or any other type for that matter) (for linux) I get:
    File system resize support required, such as HFS+ with Journaling enabled.
    I erased osx 10.9 and reset to factory settings back to 10.8 but the same problem continues.
    I am not sure what to do to get dual booting working again. I do have an ubuntu backup on an external drive, but I would prefer not reformatting that partition.

    I don't know why you couldn't repartition the disk using Disk Utility. You would have to provide more information about why you can't.
    As for OPTION booting Ubuntu I'm not sure how that worked. Typically Ubuntu installs the GRUB bootloader/manager that provides a text menu from which you select which OS to start. GRUB replaces the OS X boot manager.

  • Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

    Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

    Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
    Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
    Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
    Enable iCloud syncing for Pages on your mobile device and launch the App.
    If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

  • How do I recover files from HP Connected Drive that no longer show up after a factory reset?

    I am trying to recover files that were once visible in HP Connected Drive, after completing a factory reset. The files that I need are no longer showing up. How can I get them back?

    Try using a data recovery product such as the ones listed here. Don't erase the drive or write anything else to it until the files are recovered or you choose not to recover them.
    (117246)

  • Yahoo Mail no longer showing up on iPhone 5

    Yahoo Mail on iPhone won't show any new emails. Been a few days now. Restarted the phone several times. Deleted the Yahoo Mail account from phone and then added it back - did that twice now. All of my saved folders from Yahoo Mail show up but there is now no old or new mail in any of the folders. I cannot send any emails from the Yahoo address either.
    This happened once before for like 3 days. Then I woke up one morning and all my mail was magically there.
    Has anyone else dealt with this?

    A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
    https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
    https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
    On the iPhone, tap Settings.
    Tap Mail, Contacts, Calendars.
    Tap your Yahoo account, then delete it.
    Tap Add Account.
    Tap Other.
    Tap Add Mail Account.
    Complete the Name, Address (email address), Password and Description fields.
    Click Next.
    Ensure IMAP is selected.
    Enter the following incoming mail server information:
    Incoming Mail (IMAP) Server - Requires SSL
    Server: imap.mail.yahoo.com
    Port: 993
    Requires SSL: Yes
    Hostname is mail.yahoo.com.
    Username is your full email address
    Password is the same password used to access webmail.
    Enter the following outgoing mail server information:
    Outgoing Mail (SMTP) Server - Requires SSL
    Server: smtp.mail.yahoo.com
    Port: 465 or 587
    Requires SSL: Yes
    Requires authentication: Yes
    Username is your full email address
    Password is the same password used to access webmail. It may have been entered for you.
    Tap Next.
    The iPhone will establish an SSL connection to your IMAP and SMTP servers.
    That’s all!

  • Contact list not showing up after upgrade to iOS5

    Just upgraded to iOS5 now my contact list is blank but the contacts still show up on incoming calls and text messages. I have the iPhone4 and yes I have reset the phone. Any clue how to get them to list again in the contact area? Thanks for any help!

    My contacts were still in place after upgrading to 5, but I could not get into them.  Clicking on a name would just freeze the Address Book.   Some other thread here suggested the "soft reset", holding down the Home and Power buttons at the same time and power cycling the phone.   That solved the problem for me. 

  • Wi-fi No Longer Turning On after Upgrading to Mavericks

    After upgrading my MacBook (13-in Aluminum Late 2008), which is supposed to be compatible for said upgrade, my wi-fi is turned off and could no longer be turned on.  I restored my system back to Mountain Lion and my wi-fi is up and running again.  Is there someone out there who can help me fix this? Thanks.

    There is a temporary fix, but it is only good for one power cycle.  You go to System Preferences -> Network and delete the wifi entry by selecting it and then using the at the bottom of the selection box.  Apply changes and reboot the Mac.  On reboot go back into the network preferences and re-add the Wifi entry with the button.
    This fix will work until you power off, restart, or exhaust the battery of the laptop.  You can sleep without losing the capability.  This actually has been a problem as of the last Mountain Lion update that hasn't been fixed with Mavericks.

Maybe you are looking for

  • Landing Page for DTN Node

    Hi, This has been bugging me and I hope you can help.  In the Detailed navigation there is the node twistie and just to the right is the node description.  If you select the twistie the node expands.  If you move just to the right of the twistie and

  • Select data from different database

    hi, may I know how to select data from different database? for example, I've 2 databases, OracleDB and OracleAR Connect with OracleAR in SQL*Plus select * from OracleDB.TableName does Oracle support this kind of query? how can I retrieve data from ot

  • Exclude Purchase Requisition as a source of requirement

    Hi All, Please help me to configure the scenario. Sales order is created - Plant A, Sales Org u2013 A. (Item category u2013 BANC, Plant B is created as a vendor for Stock Transfer Purchase Order) Production Happens in - Plant B Present scenario u2013

  • Blocking GOODS ISSUE directly to PM orders without reservation

    hi friends, we want to block direct GOODS ISSUE to PM orders without reservation Now when we create reservation and store issues against reservation then mvement type is 261 and same movment type is for direct issue to PM order.Only what we have to d

  • Synching iPod Nano 4th from previous Mac to borrowed PC..

    I am temporarily using a borrowed PC while my Mac is being fixed. When I plug the iPod into the iTunes PC, it asks me if I want to re-format the iPod. If I do so with the PC, will I be able to re-format it back when I go back to the Mac OS X Tiger, L