Yahoo email - Updated date/time stuck

Odd one...
for starters, Yahoo push does not work at all for me... no big deal though, I just check it periodically..
Here is the odd part.
Since Monday, when I check my mail, it does receive mail, however, when I look at the time at the bottom for last updated, it is stuck at 7/16/07 3:04pm
I have deleted the account and readded it, I have reset the iphone, and I have cleared out the yahoo inbox... no matter what I do, the 'Last Updated' date & time is stuck at the above, which is quite annoying.
This only occurs in that Yahoo account. Gmail and POP work fine.
I assume this is a bug, but has anyone else experienced this?

I gave up on Yahoo. Gmail has been working pretty good for me on the iPhone. Very reliable, I can use my work email ID as a reply-to, doesnt care if its Wifi or EDGE, and the spam filters are top notch. Its free with no advertising (except from happy users like me )

Similar Messages

This is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update

this is my 3rd macbook air and pro that kicks me out my yahoo email all the time and tells me my password is wrong when its not this been going on 2 years 3 different macs sometimes it dont do it for months after a software update

Don't switch email providers. Switch to another email client on your Mac. It is not Yahoo. I have 3 Yahoo accounts and never have any problems getting or sending mail from/to those accounts. But I don't use the built in Mac Mail program. I use Thunderbird. I use thunderbird on both Mac OS X and Windows. Been using it for some time now with no problems getting my Yahoo mail, Google gmail mail or form my work email account.

Inbound email update data in R/3 46C?

I know that Interactive Forms has the possibility of having an inbound email update data in R/3?
I also know that Interactive Forms is not possible with version 46C.
Can I get an inbound e-mail to update data in R/3 if I am on version 46C???
-Ken

Dear Relaxed Surfer,
The link you give is great to handle basis setup.
Is there a place to handle application setup? Suppose I want an inbound e-mail to execute a transaction, call a BAPI or simply do a direct update to a Zee table. Is there documentation on this?
-Ken

How do I update Date Time Digitized to match an updated Capture Time for a DNG file?

I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'. Maybe this is a problem for DNG files only.

GreSep wrote: I saw another LR discussion that said that with LR 4.3 updating Capture Time would also update Date Time Digitized but it does not do so for me on my DNGs (and as of last month ALL my images were converted to DNGs).
One or two intermediate versions of LR 3 (perhaps Lr 3.6) set DateTimeDigitized when you gave the Metadata > Edit Capture Time command. But for people managing scans in which the capture time of the original image was different than the scan time, this behavior overwrote their scan times, so Adobe backed out of that change. Before and since those versions, the Metadata > Edit Capture Time command just changes the EXIF:DateTimeOriginal and related fields in XMP and IPTC.

Looking for generic WebService for update date & time in my C# WinForm program

hi
looking for generic WebService for update date & time in my C# WinForm program
thanks

hi
looking for generic WebService for update date & time in my C# WinForm program
thanks
Hello,
I agree with Cor that since this forum is for issues related to winodws form controls and features, but this issue is mainly related to the webservice which is working for updating time, you could consider posting this issue on other site, or you could
also consider creating your webservice by checking this document
Your first C# Web Service.
If you get any issues when create your webservice, you could post this issue in the following forum.
http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services
Regards.
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to find the last update date time and user of record field peoplecode

how to find the last update date time record field peoplecode?
Thank you.

One can check the last update date time using the following query
SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

Add Last Updated Date/Time to Cube

Is there a way that you can display a date field in EXCEL when a user logs in to a cube so that they can see when the cube was last updated (date/time)? I am currently attaching a note using linked objects but would like to find a more automated solution.

At a previous job, we managed to pick up the system date during the batch and write it into the Database/Set note (from app manager). I can't remember the exact details but pretty sure we used the API.Then people could see when they logged in whether the database had been updated or not.At another place we sent out automated e-mails at the end of each update to those users with access to the database.Ideas only I'm afraid but hope it helps.

Cache updated date/time is shown as 1970/01/01

When we checked the cache notification for central adapter engine in the cache monitoring , the cache updated date/time is shown as 1970/01/01.
We have tried to do delta cache refresh and complete cache refresh, but we have not got the intended result. Please look in to the problem and let me know if you have any ideas regarding the same.
regards,
KRUSHI

Hi
Check for these SM59 in XI ->http connections -><INTEGRATION_DIRECTORY_HMI > ->test the connection. check is it successful or not.
Also you can do the cache refresh from SLD->Administration->Cache Overview

Updating date/time

I want to be able to update the value of a datetime field in
ms sql server to a future date/time.
e.g. if a bidder is placing a pre-auction bid 3 days before
the auction starts i want to change the date & time of this bid
to 1 minute before the auction starts.
<CFSET
Start_Date=#CreateODBCDateTime(GetAuctions.Auction_Date)#>
<CFSET
Start_Time=#CreateODBCTime(GetAuctions.Start_Time)#>
<CFSET Bid_Date=#DateFormat(Start_Date, "yyyy-mm-dd")#>
<CFSET Bid_Time=DateAdd("n", -1, "#Start_Time#")>
<CFSET New_Bid_Date=#DateFormat(Start_Date,
"yyyy-mm-dd")#&' '&#TimeFormat(Bid_Time, "hh:mm:ss.l")#>
<CFQUERY DATASOURCE="#Application.Datasource#"
NAME="UpdateBid">
UPDATE Bids
SET
Bid=<CFQUERYPARAM VALUE="#Form.Bid#"
CFSQLTYPE="CF_SQL_DECIMAL" SCALE="2">,
Bid_Date=<CFQUERYPARAM VALUE="#New_Bid_Date#"
MAXLENGTH="30">
WHERE (Bids.AuctionID=<CFQUERYPARAM
VALUE="#Form.AuctionID#" CFSQLTYPE="CF_SQL_VARCHAR"
MAXLENGTH="50">) AND (Bids.BidID=<CFQUERYPARAM
VALUE="#BidID#" CFSQLTYPE="CF_SQL_INTEGER">)
</CFQUERY>
this does insert the date OK but not the time in 24 hour time
format
e.g. 2008-12-01 02:59:00.000 which has been inserted into the
database should really be 2008-12-01 14:59:00.000
then if i try and add tt to: <CFSET
New_Bid_Date=#DateFormat(Start_Date, "yyyy-mm-dd")#&'
'&#TimeFormat(Bid_Time, "hh:mm:ss.l:tt")#> i get the
following error:
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC SQL Server Driver][SQL Server]Conversion
failed when converting date and/or time from character string.
how can i get the time added as 24 hour?

it is for a multi series line graph in a reverse auction.
Currently the pre-auction bids are placed several hours before the
auction starts but then there could be like over 100 bids in an
hour which means the graph gets skewed a bit. the pre-auction bids
are needed to be closer to the starting time of the auction and it
doesnt matter in this case if the pre-auction bids have the exact
same time.
a sample value of the bid_date is 2008-12-02 10:58:56.447
i tried the following in sql:
SELECT CAST(Auction_Date AS Date),CAST(CONVERT(char(8),
dateadd(minute, -1, Start_Time), 108) AS Time)
FROM Auctions
it returned 2 columns - one for the date and one for the time
e.g 2008-12-02 15:59:00.0000000
i then tried:
Update Bids
SET Bid_Date =(SELECT CAST(Auction_Date AS
Date),CAST(CONVERT(char(8), dateadd(minute, -1, Start_Time), 108)
AS Time)
FROM Auctions
WHERE AuctionID='auctionidhere')
WHERE BidID=bididhere
i then get the followng error:
Only one expression can be specified in the select list when
the subquery is not introduced with EXISTS.

Update date/time in UNIX timestamp format

The datetime in my Oracle DB is being stored in UNIX Date Time format.
Is there a way I can set the date/time using an UPDATE statement in such a case.
for eg:
select id, creation_date, expiration_date from skel;
id creation_date expiration_date
400019 1213726470
400020 1213733052
400005 1210867973
400018 1213723608
I am looking to set the expiration date as creation_date + 1 year.
Could you please advise?

I am looking to update the value in the field. The values will still be in UNIX date/time format.Yes, but still: instead of continuing converting to Oracle dates and Unix dates, why not just store dates the way the datebase can deal with it the best?
You're probably storing your UNIX date/time formatted dates in the database as NUMBERS.
That is a great loss of lots of built-in date functionality Oracle Database provides.
If you insist on staying on that road, then explore my previous links, you will find your answer:
Convert epoch number to date, do arithmatic and convert the result back to epoch number.
That is overkill.
It won't work/scale/perform/whatever in the end. It is a bad approach.
So, please reconsider this:
Why are you storing dates as numbers?
Convert those numbers to dates once, and be done with it for ever after and benefit from all the builtin date-functionality Oracle database comes with, or convince us that you really have a valid reason to store dates in UNIX date/time format into an Oracle Database.
and my last date was...uuhhmm... never mind ;)

Display "Last Updated" date & time in footer?

I share Numbers '09 worksheets over a network with my colleague.
Is there a way to display the date & time of the most recent update (i.e. saved update) in the footer of a worksheet?
I realize this info is available via the Inspector, but it would be very handy to have it printed out along with the data to ensure we are working off the same document revision.

Insert > Date & Time into your Header, Footer, Shape, etc.
Right-Click the Date & Time and select Edit Date & Time. In the dialog window that opens, check the box for Automatically Update on Open.
Regards,
Jerry

In yahoo email, font size is stuck at 24pt and cannot reset. did various tests at Yahoo's sugg, trying other browser, unpligging plug ins, disconnecting addons, etc. nothing made any diff

Below are steps I went thru w/ Yahoo. They say prob is not on their end & I must contact you.
From: Yahoo! Mail <[email protected]>
To: Martha A. Lorini <[email protected]>
Sent: Tue, March 8, 2011 6:20:54 PM
Subject: Re: Other (KMM176704322V26727L0KM)
Hello,
I understand the default font size in your Yahoo! Mail composition page
is stuck on 24. I love to help.
Based on the information within your email, I'd like to offer a few
troubleshooting steps outlined below that you can try from your
computer. After you complete each of the steps, you will want to test to
see if the issue is still present.
- Disable any Internet browser Add-ons or Plug-ins. This made no difference
- Temporarily disable any security software. This made no difference
- Delete your Internet browser Cookies and Cache. This made no difference
- Update Flash Player. This made no difference
- Ensure that JavaScript is updated and enabled in your Internet
browser.This made no difference
- Restart your Internet browser. This made no difference
- Restart your computer. This made no difference
- Temporarily switch to a different supported Internet browser. Switched from Firefox to internet explorer. Made no difference.
- Test from another computer, please include the results of this test
with any response to this email. This made no difference
- Test from another location, please include the results of this test
with any response to this email. This made no difference
-I manually reset zoom in firefox. This made no difference.
here's what Yahoo support concluded:
Thank you for working through all of the steps we outlined in our previous email. I have tried to replicate the issue that you are describing, and unfortunately, I was not able to do so. Given that I have tried everything I can, the only thing left for me is to suggest that you contact Customer Support for your browser manufacturer. They would be in the best possible position to continue troubleshooting you specific issue.

I don't know what you mean. These are emails that I am originating, not that I am receiving. Those that I receive are okay...except insofar as they reply to an email I sent out in the first place, in which case, my fonts are 24 pt (or thereabout).
Thanks for persisting!

Organiser of calendar invite is not seeing the updated date & time of a meeting they rescheduled.

A user organised a meeting and sent it to 3 recipients. All 3 recipients responded to the meeting invitation. This invitation appeared in all four calendars. The organiser then dragged the meeting invite to another day, thus changing both the date and time.
As part of this action the organiser accepted ‘save changes and send update’. The organiser received responses to the new meeting time. The meeting appears in all 3 original recipients calendars. However, the new date and time is not visible in the organisers
calendar. This calendar still reflects the original date and time – nothing has changed.
Background: the client is running Outlook 2010 (14.0.6023.100). Exchange 2007 RU 15.
On the organisers Outlook profile I can see two items in the sent items folder. One for the original meeting invite and one for the second updated meeting invite. The option to accept the meeting invite is greyed out for the organiser as expected. If I drag
the second meeting invite (with the new date and time) to organisers calendar, with the intention of adding this to their calendar, I am prompted that ‘…as meeting organiser, you do not need to respond to the meeting…’.
There are no errors reported in the synchronisation folder.
The same experience is visible in OWA.
Any ideas?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Inserting and updating date & time in oracle 8i

I am using JDBC thin driver. I am not able to insert date and time in American format.

The best way for you is to use the TO_DATE function. It will allow you to specify the date format.

TS4268 Updated iphone 4S with IOS6, now facetime and imessage won't work, says "waiting for activation", have reset, turned off and on, removed sim card, checked date/time, checked restrictions, checked email/ID, tried all troubleshooting advice on apple

Updated iphone 4S with IOS 6, now facetime & imessage won't work, says "waiting for activation", have reset, turned off & on, removed sim card, checked restrictions, email/ID, date/time, tried all troubleshooting advice on apple support. HELP!!!!

Updated iphone 4S with IOS 6, now facetime & imessage won't work, says "waiting for activation", have reset, turned off & on, removed sim card, checked restrictions, email/ID, date/time, tried all troubleshooting advice on apple support. HELP!!!!

Yahoo email - Updated date/time stuck

Similar Messages

Maybe you are looking for