Yahoo mail sync issue after upgrade to iOS 5

After i have upgraded to iOS 5 my emails from Yahoo are a month off.
Only the emails from a month before are synchronized. As an example, today 10/24 I can see the emails from until 9/13.
Any ideas on how to fix this?

Ok, thanks everyone's experience sharing with each other. after I try so many time with my bro for this issue, finally we got solution to solve this issue.
I'm using iPhone 4 and my bro is using iPod touch 4th Generation, we both upgrade to iOS 5,
then I was thinking that when I do Facetime setting, there is a selection that you can use your Apple ID as your Facetime account, so I changed my Facetime account with Apple ID, the default setting is using your phone number. then its works!!  now I can use Facetime with my bro in airplane mode.
I guess before I upgrade iOS 5, iOS 4 allow Facetime auto detect to use phone number(if airplane mode is off) or use Apple ID, which your email address to connect to another user, but iOS 5 not allow it or disable auto detect, (I just guess). 
anyway now I only use Apple ID as my Facetime account, then I can use Facetime under airplane mode. hope it help you guys.

Similar Messages

  • Sync issues after upgrading to ios 7

    After upgrading to iOS 7 on my iPad 3 with no problem at all, I lost all my music. When I try and sync with iTunes 11.1 (on Windows 7) it hangs on the last step "waiting to apply changes", and the little sync icon on the iPad disappears. I can't even add or remove apps. Any solutions out there?
    Thanks in advance.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • IPhone 4s issues after upgrading to IOS 8

    Have few issues after upgrading to iOS 8
    - Phone hangs every few hours, reboots automatically
    - Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
    - Searching for contacts is a problem
    - Apps hang (especially facebook)
    Any way to go back to iOS 7 ?
    Any other tips / tricks appreciated..
    Venkat

    No way to come back to iOS 7 ...
    But did you tried to reset all settings (general -> reset -> all settings) ?
    For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

  • Freeze/Battery issues after upgrade to iOS 8.0.2

    Since upgrading my 3rd Gen iPad WiFi to iOS 8.0.2 I have been experiencing freezes where nothing works. I can't open apps or do anything. If I hold the on/off button down eventually it comes back to life.  Second issue is battery life.  Last night I closed my smart cover and made sure the display was off.  Battery at the time was 62%. This morning I opened the iPad smart cover and the battery was down too 23%.  This has happened a number of time over the past week or so. I have Blue Tooth and Location Services off.
    Both of these issues are new after upgrading to iOS 8.0.2.  No problems whatsoever prior to that.
    Not sure if I'm putting this in the correct category or not.
    Is there a way to wipe the iPad clean and reinstall everything from scratch or is my iPad just shot?  Thanks in advance.

    Same sort of issues here on my ipad3. iOS 8 turned it from a nice slick device into a jerky, laggy pain. Tried all the reset options and it's still pretty crap.
    NIce one apple, I'm changing to a galaxy tab after you broke my iPad!

  • WIFI intermittent connectivity issues after upgrading to iOS 8.0.2

    Hi,
    WIFI seems to be dropping a lot after upgrading to iOS 8.0.2. I even took the iPad back to Apple and they replaced it with a new one with iOS7, which was working fine, then the same problem resurfaced after upgrading to iOS 8.0.2. I can't use my iPad in the evening at all.
    My iPhone is fine after the upgrade though.
    Clearly an iOS8 software issuse on iPads?
    Thanks

    Similar thing happened to me..  Seems like the bug has not been solved.. I managed to restore to iOS 8 and this resolved the issue, at least for the time-being!
         Apple team, my sincere request to you:Please attend this bug asap. It really dissolves the purpose  of an iPhone..
    Keeping my fingres crossed till then!

  • IPhone 4S wont sync music after upgrading to iOS 7 on windows 7

    After upgrading to iOS 7 on my iPhone 4S, I lost all my music.
    When I try and sync (USB) with iTunes 11.1 (on Windows 7)
    it hangs at the last step "waiting for changes to be applied" (step 5 of 5)
    i am looking for weeks for a solution to this problem and i saw meny pepole suffer from it
    but still i cannot find a way to fix it
    help me please

    You got it downloaded and I assume you mean it is installed as well.  It was buggy for me.
    I had to close and restarted iTunes before I could use it properly.
    Then, I had to unplug and replug in my phone before it recognises it.
    Just had to try everything.  As final choice, update over the air.  I try to avoid it as it tends to have more problems than a tethered update.

  • Cisco 7200 VSA issue after upgrade to IOS 15.2

    After upgrade to IOS 15.2(4), VSA module in 7206VXR (NPE-G2) is disabled and we cannot enable it.
    Show diag output:
    ------------------ show diag ------------------
    Slot 0:
    VSA IPsec Card Port adapter
    Port adapter is deactivated
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    PCB Serial Number        : JAF1309ADDT
    Hardware Revision        : 1.0
    Part Number              : 73-10220-05
    Board Revision           : B1
    RMA Test History         : 00
    RMA Number               : 0-0-0-0
    RMA History              : 00
    Deviation Number         : 0
    Product (FRU) Number     : C7200-VSA          
    Version Identifier       : V01
    Top Assy. Part Number    : 68-2578-05
    CLEI Code                : CNUCAFNAAA
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF C1 8B 4A 41 46 31 33 30 39 41 44 44 54 40
      0x10: 05 0D 41 01 00 82 49 27 EC 05 42 42 31 03 00 81
      0x20: 00 00 00 00 04 00 88 00 00 00 00 CB 94 43 37 32
      0x30: 30 30 2D 56 53 41 20 20 20 20 20 20 20 20 20 20
      0x40: 20 89 56 30 31 20 D9 03 C1 40 CB 87 44 0A 12 05
      0x50: C6 8A 43 4E 55 43 41 46 4E 41 41 41 FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    If we try to enable it manually from CLI we get the following message:
    Router(config)#crypto engine slot 0
    VSA will NOT come up until system power-cycle or reload
    Of course, after reload nothing happens.
    Is VSA incompatible with IOS 15.x? I'm asking because downgrade to 12.4 causes VSA to be active again.
    Regards,
    Igor

    Hi igor,
    1) FDP image
    Field-programmable devices (FPDs) are hardware devices implemented on router cards that support separate software upgrades. An FPD image package is used to upgrade FPD images
    The FPD image package must be compatible with the Cisco IOS software that is running on the router. If an incompatibility exists between an FPD image package and the Cisco IOS software release running the router, the device with the FPD will not operate properly until the incompatibility is resolved.
    The FPD automatic upgrade feature searches only for the FPD image package file that is the same version number as the Cisco IOS release being used by the system. For example, if the Cisco IOS release being used is Cisco IOS Release 12.4(5)T1, the system searches for the FPD image package file that supports the specific Cisco IOS release (c7200-fpd-pkg.124-5.T1.pkg).
    2) Steps to Upgrade:
    From the document below which I already sent you, please refer to the section “How to Upgrade Field-Programmable Devices”
    http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/fpd.html
    I would recommend you to follow the steps in the “Field-Programmable Device Quick Upgrade (Automatic FPD Upgrade Only)” as that is the recommended and the easiest way.
    Steps are:
    The command is present “upgrade fpd auto” in the running-config by default.
    Have the Cisco IOS image in disk2:
    Download the FPD image package to disk2: flash disk
    Reboot the router using the new Cisco IOS release.
    Hope this helps
    Thanks
    Syed

  • Can't sign in yahoo mail via safari after upgraded to iOS6

    After upgraded to iOS6, I was able to sign in yahoo mail via safari only the first time but after that could not.  Every time when I tried to sign in yahoo mail, it returned to sign in page.  I have had the same problem with other upgraded iphones, but not iphone with iOS 5. 
    But if I clear history and cookies in the safari setting, I can sign in yahoo mail only once.  Every time when I want to sign in yahoo mail, I have to go to the safari setting and clear history and cookies.  I have no problem with gmail and hotmail.

    After upgraded to iOS6, I was able to sign in yahoo mail via safari only the first time but after that could not.  Every time when I tried to sign in yahoo mail, it returned to sign in page.  I have had the same problem with other upgraded iphones, but not iphone with iOS 5. 
    But if I clear history and cookies in the safari setting, I can sign in yahoo mail only once.  Every time when I want to sign in yahoo mail, I have to go to the safari setting and clear history and cookies.  I have no problem with gmail and hotmail.

  • Mail server issues after upgrading

    Hello,
    After upgrading my iMac to Mountain Lion 3 of our 5 email account are not working.
    The 5 accounts are [email protected] However 3 of them are not able to come online.
    I tried MANY times to delete them and recreate them coming ALWAYS to the same issue.
    What I noticed is that the INCOMING mail is different from the incoming mail from the accounts that are working. (the accounts that are working use an incoming mail server: p05-imap.mail.me.com or p01-imap.mail.me.com) However the accounts in trouble only show a grey out "MAIL.EXAMPLE.COM" unable to switch it.
    The outcoming mail in those accounts is "ICLOUD - OFFLINE".
    Even if I tried to switch servers I get a notice " SERVERS MARKED WITH ALERT ICONS ARE IN CONFLICT AND CANNOT BE SAVED. TOW SERVERS CANNOT SHARE THE SAME ADDRESS AND AUTHENTICATION SETTINGS. TRY AGAIN".
    I get this notice even after deleting all the problem accounts.
    Also I tried switching ports like some people suggested on other posts and does not help either.
    The account are working perfectly on ipads, ipods and iphones.

    David,
    You are right, theer are some changes incorporated in the latest MLR # 16 on the configurations files and on the dehydration store metrics(such as performance, fields,..).
    However, I would not suggest to continue working on olite, even for Development/Test purposes as you might get stuck with strange errors...and the only solution would be to re-install SOA Suite if your olite gets corrupted. There might be ways to gets your olite back to position, but trust me..its not so simple.
    Also, when you develop and stress test all your testcase scenarios in an TEST Adv installation, its simple to mimic the same in actual production box, as you exactly know its behavior.
    So, go for a brand new SOA 10.1.3.4 MLR # 5 (or) 10.1.3.3.1 MLR # 16 SOA Suite Advanced installation with Oracle DB 10.2.0.3 as its dehydration store.
    Hope this helps!
    Cheers
    Anirudh Pucha

  • Exchange mail cannot work after upgrade to ios 8.3

    just upgraded the ios to 8.3 yesterday, and the exchange mail could not work since then. no luck even after deleting and re-add the account.
    anyone facing the same problem?
    i will never trust Apple next time to upgrade the new OS at the first day.
    iPhone 6

    I have exactly the same problem. When I make a change in Settings Exchange checks itself off implying that it is working, but I keep getting "Cannot Reach Server" message whenever I try to get email.
    I have become very leery of accepting the new IOS upgrades. There is always a problem.

  • Mac OS X 10.6.5 fixes sync issue after upgrading to new MobileMe calendar

    The issue that prevented iSync from 'seeing' calendars after upgrading to the new MobileMe Calendar has been fixed in iSync 3.1.2, part of the Mac OS X 10.6.5 update.

    Appointments made on my phone are now synced to the local calendar. How do I get these in the cloud and synced with my other devices (macbook and ipod touch)?
    Unfortunately, this is the way it works now. I asked Apple about this and got the following response:
    +"Events from CalDAV calendars can be synced via iSync to a phone, but events can only be created on local calendars. This is as designed."+
    I haven't tried it yet, but I presume you drag events from the local calendar to the MobileMe calendar, but I don't know how this would handle duplicates.

  • Ipad 2 Wifi issues after upgrading to ios 7

    I live in a small house, 750 sq ft area (30 x 22). Ipad wifi was working fine in all the rooms before upgrading its iOS to 7. After ipad2 iOS was upgraded to iOS 7, wifi now works in the room where the Wifi router is located. But does not receive Wifi signal in any other room. I tired everything that has been suggested in the forum - like changing the router settings (channel, security etc),playing with ipad2's wifi, etc. etc. But to no avail!
    Clearly the bug in iOS 7 has caused this issue! How does one log this issue with Apple tech support team so they can rectify this issue in iOS 7 patch? Also, please let me know if I should be trying anything else. Thanks!

    I have exactlythe same issue. Have had ever since the upgrade to iOS 7. It's nothing to do with the router. It has to be a bug in iOS 7. Question is, would upgrading to iOS 8 help at all???  Anyone done this.??  I used to love my iPad and it was never out of my hand. Now I just hate it and use my Kindle Fire all the time instead. I used to pick up wiif signals across the street. Now I have to be sitting on a router to connect.
    <Edited by Host>

  • E-mail from Apple after upgrading to IOS 6

    I upgraded my iPad 2 to IOS 6. I later got an e-mail from Apple saying: "Your Apple ID was used to sign into iCloud on an iPad 2. If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password". Did anyone else get that message after upgrading?

    Thanks for the reply deggie. It's a pretty strange e-mail to receive. I have to assume it is directly connected to the upgrade, and was not sent as a result of my account being hacked?!

  • Signal issues after upgrading to ios 6.1.2

    ever since i've upgraded to ios 6.1.2 have had problems with my signals, hv never seen all bars; 2 at most. hv drop calls all the time. it;s irritating . tried evry thing like network resets, turning off/on 3g and lots of stuff suggested in other threads bt in vain . happened once before in one of the ios 5.something series bt ws fixed on the next ios upgrade. apple needs 2 fix this soon and launch the next update .once fixed i dnt think i'l eaisly try experimenting with ios updates.

    Exactly the same as me. Updated now can not get FaceTime to work. Just hangs on the connecting page then loses connection after several seconds.
    Friends calling me does the same thing.
    It is not our router, I can download and upload data quickly without any problem.
    Who quality controls IPads? Seems lots of mike and connection problems with Talktime at the moment. Apple must be embarrassed.

Maybe you are looking for

  • How to get selected value from a listbox

    Hi ! I use following code to fill in my LISTBOX with values : AT SELECTION-SCREEN OUTPUT.   val-key = 1.   val-text = '0016'.   APPEND val TO list_values.   val-key = 2.   val-text = '0028'.   APPEND val TO list_values.   val-key = 3.   val-text = '0

  • Can't place and Indesign CS5 created swf back in an Indesign CS5 file?

    I hope someone can help me?  I have created an animated swf file in Indesign CS5 using the amination and timing panels, for use in an interactive PDF.  The swf has exported correctly and plays as expected in the browser.  However, when I go to select

  • LR and NEFs

    I'm still new to this but I'm learning. I've been looking at a number of workflow/photo enhancement options including LR. I understand that some of the NEF information is encrypted. It seems like CaptureNX would be able to access all of the informati

  • How do I customize the Push Notification sound?

    How do I customize the Push Notification sound?

  • Multiple Video Tracks - Selectable

    I cant for the life of me figure out how to put more than one video angle within one quicktime file and make it user friendly. I want to create a file similar to a DVD with selectable video angles. I can get my files combined and in the movie propert