Yahoo Messenger (Sprint Pre): No account button! only one Y! at a time?

Hi,
I have a Sprint Pre, and I have a Yahoo IM account set up in my Messaging application. Works great, tho sometimes it does take a long time to sign in or needs me to sign out then try signing back in for it to succeed in signing in.
When I go to Accounts and Preferences, and go to the Add Account menu, I only see two buttons, one for adding a google account and one for adding an AIM account.
I'm just checking: should I see an option to add a Yahoo IM account also? or does the fact that I already have one set up mean that I can't add another one, and the button not being there is a reflection of that?
I'm a little nervous in case I ever had to delete the Yahoo IM account or if I ever have to re-setup the account. If I do, will that button be there again?

Yahoo Messenger isn't natively supported on the Palm Pre/Pixi, and all signs point to it not ever happening. This is a known issue and has befuddled Palm users since the device came out. There is yet to be any work-arounds that I'm aware of.
When you say "messaging application", what app are you using specifically?

Similar Messages

How can I have multiple accounts and only one library

How can I have multiple accounts and only one library that all the purchased items feed into?

ask your wireless provider.

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

How to select only one record at a time in ALV

Hi all,
I have to use ALV report. Each record on the report output should have a button (or radio button) which will allow the record to be selected. My requirement is to select only one record at a time.
please guide me how to proceed further.
regards
manish

hi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/sampleCheckBoxProgram
Regards
Pavan

Return only one record at a time

I am new to crystal reports so any help would be appreciated. I have a .net app that is a order processing system. When the user is in a record, they want to be able to click on a button an open a crystal report showing only that orders details. I created a crystal report that has the following fields:
Order ID, Product ID, Unit Price, Sell Price, Hours.
The Order ID is the primary key in the database. The report runs fine when clicking the report button in the app, but returns the details for every order in the database. We just need the details of the order that the user is processing. How do I setup the report to only show that order's details? I am using VB 2005 and Crystal v9.
Edited by: sking on Mar 6, 2009 1:12 AM

Brian,
Thank you for all your help. I have been able to setup the report to return only one record at a time. In my app, when I click the report button the PDF opens perfectly with only one record. However, when I go to another record and open the PDF it returns the information from the record id that was set as the default parameter value (crReportDocument.SetParameterValue("Orders", 67). How do I get it to return the report for a different record? Here is the code I'm using. I think I'm really close with your suggestions but I'm just missing one step.
#Region "CrystalReport"
     ''' <summary>
     '''Override the CrystalReportButton_Click and call DisplayReportAsPDF_CrystalReportButton function
     ''' </summary>
     Public Sub CrystalReportButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
      Dim crReportDocument As CrystalDecisions.CrystalReports.Engine.ReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument
      Dim fileName As String = "test.rpt"
      Try
          If fileName.Substring(1).StartsWith(":\") Then
          crReportDocument.Load(fileName)
      Else
          crReportDocument.Load(Me.Page.MapPath(fileName))
      End If
      Catch ex As Exception
          Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
          errMsg += " Please make sure the dlls for Crystal Report are compatible with the Crystal Report file."
          BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
      End Try
      Try
Dim paramValue As CrystalDecisions.Shared.ParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue()
           paramValue.Value = "67"
           crReportDocument.SetParameterValue("Orders", 67)
DisplayReportAsPDF_CrystalReportButton(crReportDocument)
      Catch ex As Exception
          Dim errMsg As String = ex.Message.Replace(Chr(13).ToString(), "").Replace(Chr(10).ToString(), "")
          errMsg += " If this is a deployment machine, make sure network service has permissions to read or write to the windows\temp folder."
          BaseClasses.Utils.MiscUtils.RegisterJScriptAlert(Me, "BUTTON_CLICK_MESSAGE", errMsg)
      End Try

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD

TS3276 I can have only one recipient at a time on e-mails I am sending.

I can have only one recipient at a time on e-mails I am sending.

Any ideas on how to fix it?

Selecting only one row at a time

Hi experts,
i have following doubt regarding selecting rows from a db:
Is there any way of selecting only one row AT A TIME from a dabase just to collect the data in rows instead of in a unique document containing all the rows?
I would like you to ellaborate on this as i need to send only one row to the IE, and then other row, and so on... without throwing any error!
I have seen that there are SELECT SINGLE and SELECT UP TO 1 ROW, but these two methods are only useful when retrieving only one row, and that does not match my requirements. I need to process all the rows but one by one..
I know that we can use the receiver jdbc adapter as if it was a sender by means of its specific datatype, but how to do it row by row??
Hope i had explained well..
Thanks in advance and best regards,
David

Hi kiran,
Yes, my table has 5 not null fields but i am selecting and updating fixes values so i think that I will definetely go for the next solution:
SELECT * FROM t1 WHERE status='0' and ROWNUM<2;
UPDATE t1 SET status='1' WHERE status='0' and ROWNUM<2;
My only concern is if the update will take the same row that the select.... BTW, I think it will
..What do you guys think?
I ve been trying to operate with your proposed queries but i received some errors. Your queries are very interesting but i think that with the above ones i meet my requirements as the status field will be 0 for not processed rows and 1 for precessed ones (and the update will look for the row that meets the same 'where' clause than the select, and then, and only then, it will set status='1').
The only thing i have to care about is what i questioned before.
Thanks a lot and best regards,
David

Creating iphoto book and can't seem to view/ work on only one page at a time.

I am creating an iPhoto book and can't seem to view/work on only one page at a time. The Navigator, that allows you to focus on a part of the page is actually 1 1/2 pages in size so 1 1/2 pages are in view when trying to work on one page. What am I doing wrong or how can I fix this. It is very distracting viewing half of a previous page when trying to create a new page and write a story to go with the related pictures.

My Navigator seems to be to large. It covers 1 1/2 pages while in the training information it shows as the size of one page. Is there a way to adjust the size of the Navigator?
You can hover the mouse over the left border of the Navigator - then the cursor will turn into a resize cursor and you can drag the border and make the Navigator panel smaller by enlarging the source list.
Or drag the lower right corner of the iPhoto window and shrink the appliaction window. This will only make the navigator smaller - the source list and information panel will stay the same size.
Regards
Léonie

SCAN LISTENER runs from only one node at a time from /etc/hosts !

Dear all ,
Recently I have to configure RAC in oracle 11g(r2) in AIX 6.1 . Since in this moment it is not possible to configure DNS, so I dont use SCAN ip into the DNS/GNS, I just add the SCAN ip into the host file like :
cat /etc/hosts
SCAN 172.17.0.22
Got the info from : http://www.freeoraclehelp.com/2011/12/scan-setup-for-oracle-11g-release211gr2.html#ORACLE11GR2RACINS
After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
now when I relocate it from node 2 using
"srvctl relocate scan -i 1-n DCDBSVR2" , then the output shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2
Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
srvctl relocate scan -i 2 -n DCDBSVR2
resource ora.scan2.vip does not exists
Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?
Here is my listener file (which is in the GRID home location) configuration :
Listener File OF NODE1 AND NODE 2:
==================================
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON
LISTENER_SCAN1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER_SCAN1)
ADR_BASE_LISTENER_SCAN1 = /U01/APP/ORACLE
2)
Another issue , when I give the command : " ifconfig -a " , then it shows the SCAN ip either node1 or node2 . suppose if the SCAN ip is in the node1 , and then if I run the "relocate" command from node2 , the ip goes to the Node 2 . is it a correct situation ? advice plz ... ...
thx in advance .. ...
Edited by: shipon_97 on Jan 10, 2012 7:22 AM
Edited by: shipon_97 on Jan 10, 2012 7:31 AM

After configuring all the steps of RAC , Every services are ok except SCAN_LISTENER . This listener is up only one node at a time . First time when I chek it from node1 , it shows :If I am not wrong and after looking at the document you sent, you will be able to use only once scan in case you use /etc/host file and this will be up on only one node where you added this scan entry in /etc/hosts file.
Now my question , How can I run the SCAN and SCAN_LISTENER both of the NODES ?Probably you can't in your case, you might run only one i think and on one node only
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr1
now when I relocate it from node 2 using
"srvctl relocate scan -i 1 -n DCDBSVR2" , then the output shows :
srvctl status scan_listener
SCAN listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node dcdbsvr2You moved scan listener from node 1 to node 2, OK
Baring these , we have to try to relocate it from the node2 by the following way, then it shows the error :
srvctl relocate scan -i 2 -n DCDBSVR2
resource ora.scan2.vip does not exists
--------------------------------------------------------------------------------Since you have only one scan, you can't relocate "2". So ise "1" instead here also
FYI
http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
Salman

Multiple Qaawses but use only one Qaaws at a time

Hi,
In Dashboard , I have two Qaawses (Qaaws1 and Qaaws2). When I am trying to generate SWF file both the qaawses are running. My requirement is, in Excel file I will set a flag value in one cell (0/1).
If the cell value is '0' then the Dashboard should use only Qaaws1.
If the cell value is '1' then the Dashboard should use only Qaaws2.
In essence my requirement is, even though multiple Qaawses are present in Dashboard, the Dashboard should be able to use only one Qaaws at a time based on my requirement (i.e., based on flag bit value 0/1).
Can any one suggest, solution for this?
Thanks in advance.
Regards,
M. N. Kishore Babu.

Hi David,
Thank you very much for the response and sorry for the delay.
Our actual scenario is a s follows:
We pass customer id and shipper Group Id as an input parameters to the flash variables from front end (through Java program). And these two values will written in Excel cells (let say Customer id in A1, and Shipper Group Id in B1)
Now there are two Qaawses, Qaaws1 and Qaaws2 in the xlf in addition to flash variables.
Qaaws 1 query is as follows :
select * from shp_details where customer id = A1
Qaaws 2 query is as follows :
select * from shp_details where customer id = A1 and ShipperGroup_id = B1
On front end we have two drop downs, Dropdown1 is for customer id and Dropdown2 is for Shipper Group Id.
When we select an item in Dropdown1, from front end we pass only Customer Id and when we select an item in Dropdown2, we pass both Customer Id and Shipper Group Id.
Our requirement is,
When we select Dropdown1 (we are passing only customer id), we expect only Qaaws1 to be executed.
When we select Dropdown2 (we are passing both customer id and shipper Group Id), we expect only Qaaws2 to be executed.
Please let me know, if I need to provide any further clarification.
Thanks & Regards,
M. N. Kishore Babu.

Concurrent program to be submitted y only one user at a time

Hi
I have an issue with one of my reports. The report is using temporary tables, those will under go insertion and deletion while the report is running. So, to make sure that two or more concurrent requests submitted for same report, will not conflict, I want to make my concurrent request to be submitted by only one user at a time.
How can I do that?
Any help is appreciated.
Thanks
BalaKrishna

The "run alone" box should not be checked. This indicates that this program can only run when no others are running. Pl see MOS Doc 1078462.6 (Custom SQL Concurrent Program Returns NO MANAGER Error). This option should typically not be used.
To be able to achieve what you need, set the incompatibility (as you have done) and then bounce the concurrent managers for the setting to take effect. Pl see these MOS Docs
436186.1 - Cannot Make Concurrent Programs Incompatible With Itself
142944.1 - How to Make a Concurrent Program Incompatible with Itself
HTH
Srini

I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options, 1- erase and sync, 2- transfer purchases. what to do?

Follow these instructions:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

How to configure my MDB serve only one message at a time?

Hi All,
I have requirement where I need to develope a MDB iin weblogic. This MDB has to serve only one message at a time. If the send second message is sent while the first one is running the second message has to sit in queue and start processing once the first message is finished.
Is there any way to configure via annotations or in weblogic server settings ?
Any help would be really appreciated...
Thank you,
K.

Here is my client code to send the message
Connection connection = null;
javax.jms.Session session = null;
MessageProducer producer = null;
try
connection = lpConnectionFactory.createConnection();
session = connection.createSession(false, javax.jms.Session.AUTO_ACKNOWLEDGE);
// Create a MessageProducer from the Session to the Validation Queue
producer = session.createProducer(myQueue);
((WLMessageProducer)producer).setUnitOfOrder();
// Create a message
ObjectMessage message = session.createObjectMessage();
message.setObject(params);
message.setStringProperty(MyServiceConstants.OPERATION, operation);
// Send the message to the queue
producer.send(message);
finally
if (producer != null)
producer.close();
if (session != null)
session.close();
if (connection != null)
connection.close();
Following is the weblogic-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
"-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN"
"http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>TestMDB</ejb-name>
<message-driven-descriptor>
     <pool>
          <max-beans-in-free-pool>1</max-beans-in-free-pool>
          <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
     </pool>
</message-driven-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>

How to configure my JMS QUEUE serve only one message at a time?

Hi All,
I have requirement where I need to develope a JMS QUEUE in weblogic. This MDB has to serve only one message at a time. Is there any way to configure via annotations or in weblogic server settings ?
Any help would be really appreciated...
Thank you,
K.

I'm not aware of any way to configure the max pool size via annotations, you might try posting to the EJB newsgroup (please post back the answer). Of course you can set the size via an EJB descriptor, as per the MDB chapter of the Performance and Tuning guide in the edocs.
By the way, if you have ordered message processing requirements, I highly recommend taking a look at the WebLogic JMS "Unit-of-Order" (UOO) feature as per the UOO chapter of the JMS programmer's guide. For a variety of reasons, the UOO features is often, by far, the best option for handling such requirements. If this feature applies to your use case, then there would be no need to force single threaded message processing in some sort of manual fashion (the feature enforces this for you).
Tom

Yahoo Messenger (Sprint Pre): No account button! only one Y! at a time?

Similar Messages

Maybe you are looking for