Yahoo outgoing mail server not working.

My yahoo outgoing server not working on iPod touch or iPad it says apple.smtp.yahoo failed...incoming is ok so far...this outgoing mail failure just started about a couple of days back....anyone else having this problem?????what should I do?rediffmail account does not get set up either so just unable to use any of my emails. :(

Hello, and welcome to the Discussions.
I get 100% success pinging mail.adelphia.net, and if at your home venue where Adelphia is your ISP, then I think no separate Authentication is required. Port 25 would be the proper port. However, if you are not at home, and the provider of internet connection limits you to using only authenticated SMTP then you would not able to use mail.adelphia.net as the Outgoing Server.
Are you at the venue where Adelphia is the ISP?
Ernie

Similar Messages

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • Me outgoing mail server not working from iPhone / Reply to email address

    Hi, I have MM sent up on my iPhone and Mac, the SMTP outgoing mail server does not work from the iPhone but does from the Mac, to get around this I changed the outgoing server on the iPhone to my optusnet outgoing server, that has been working fine, the problem I have is if someone reply's to a email from the phone it gets bounced back becuase the reply to email address for me is @mac.com not from @me.com
    I have tried to change the reply to email address in the phone but it only allows you to change the name not the @mac.com
    I have only ever had a Me account not a .Mac account so I dont know why its locked to @mac

    I deleted the MM account on the phone and reinstalled it again. Now it is working.

  • Suddenly outgoing mail server not working!

    Out of nowhere, I am all of a sudden having problems with my outgoing mail servers. Most of my email accounts are through AOL, so based on which screen name I am emailing from, the outgoing server as always been smtp.aol.com:username. But lately, when sending mail, I get the drop down "try a different outgoing mail server warning. My internet service is through Comcast, so if I change the outgoing mail server to smtp.comcast.com, the mail will send. But why has this problem popped up? Did Comcast change something? AOL? Thanks for any help anyone has!

    I have got a similar problem. Mail has never worked properly - I can receive emails but not send them, Although the data for the smtp-server is absolutely correct and so is all rest password etc. - I've also tried other ports but they didn't work either. It can't be my computer or some firewall because Entourage, the microsoft mail-programme works perfectly well. After having had constant trouble with my PC, I bought this mac 2 months ago - and now I'm having more problems. Is there anyone who can give me a hint of what to do? Thanks.

  • Adelphia outgoing mail server not working

    I have been trying for the last week or so to get my adelphia mail to send from Mail. I can receive mail no problem, but the outgoing mail server does not work. I have the settings as such:
    outgoing server: mail.adelphia.net
    server port: 587 (also tried 25)
    SSL: off
    Password: none
    The error that I get is that port 587 times out. When I switch it to port 25 I get "This message could not be delivered and will remain in your Outbox until it can be delivered.
    Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator."
    I made sure my password is correct in keychain as well.
    When I run a tracer route to find the ISP I get " gig2-1.clmascspv-rtr1.sc.rr.com, cable6-cha.edge.aol.com, son4-1-2.rlghncrdc-rtr3.nc.rr.com " as #2, 3, 4. I have tried to use these servers, but with no success.
    Please help,
    Frustrated
    MacBook   Mac OS X (10.4.7)   MacBook

    Hello, and welcome to the Discussions.
    I get 100% success pinging mail.adelphia.net, and if at your home venue where Adelphia is your ISP, then I think no separate Authentication is required. Port 25 would be the proper port. However, if you are not at home, and the provider of internet connection limits you to using only authenticated SMTP then you would not able to use mail.adelphia.net as the Outgoing Server.
    Are you at the venue where Adelphia is the ISP?
    Ernie

  • Outgoing mail server not working-don't know how to run Connection Doctor

    I can not send mail on my outgoing mail server. I just returned from overseas and it was working fine, but now I am sending out a large document (4 MB) to multiple addresses and it says my outgoing mail server is not working. Please help. thank you.

    heather1688 wrote:
    Recently, while hooking up my ethernet cord to the switch, I have not been able to connect to the internet. Network Diagnostics tells me my Built-in Ethernet is working correctly, but Network Settings are at yellow, and my ISP, +*_Internet and Server have all failed_*+.
    I am having this problem if you find a fix please let me know. I have spent hours with apple trying to fix this. Im going on my third week with apple trying to fix this and i have a thread on this issue.
    http://discussions.apple.com/thread.jspa?threadID=2104335&tstart=0

  • HT4864 iCloud outgoing mail server NOT WORKING

    Is ICloud outgoing mail server down ?

    I deleted the MM account on the phone and reinstalled it again. Now it is working.

  • My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

    My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

    Please let me know , How we can reinstall apple mail ? .
    1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
    2.  After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
             a)Not showing any SMTP connection in TCP trace ,
             b) Connection docter every time Says "Connecting to the server "
    3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
    Please help me .
    Thanks,
    Ranesh..

  • Outgoing mail is not working on the Macbook Pro

    Hey
    I am using the mail client to read my gmail mails in my Macbook Pro. Incoming and outgoing emails were working fine and all of a sudden for the last 2 days my outgoing mails are not working and i get this error" the sender address blah blah.com was rejected by the server".
    I reentered my cred in the pref pane and it still does not work. I am able to send mails fine using the browser. Incoming mails is fine is fine on the client.
    Any idea what is causing this error?
    Thanks
    Rpk
    Mac Mini, MacBook Pro   Mac OS X (10.4.5)  

    I'm not sure why this worked fine for a period of time but most, if not all ISPs use for connecting to the internet block the use of SMTP servers outside of their network (or not provided by the ISP) on Port 25. Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some block its use regardless.
    These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
    Something to try.
    Go to Mail > Preferences > Accounts and under the Account Information tab for the account preferences at the SMTP server selection, select the Server Settings button below.
    Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
    If this doesn't work, you need to add your ISP's SMTP server to mail and select this SMTP server to send mail with your gmail account which is invisible to all recipients.

  • Mail 2.1.3 outgoing mail server not recognized

    I am running Mail 2.1.3 (OS 10.4.11) on an old power book. I use the outgoing mail server "smtp.me.com:name" . Each time Mail is restarted, sending an email results in the error message "Cannot verify SSL server...". Hitting Continue  lets the message be sent. Using the prescribed solution: ((1) show certificate (2) move certificate to desk top (3) double click and choose X509anchor) has no effect.  Changing the Port number e.g. from 25 to 587, also has no effect. Is there a solution to this problem, or is there something wrong with "smtp.me.com"?

    I did the suggested set-up, but no joy. The result was as before:
    There is no option "SMTP Authentification required" What I see is
    Hitting Continue still works, but clearly there is still something wrong. Do you have any other suggestions?

  • Mail server not working after upgrade

    After a few hours, my server finally came back up however mail is not working.
    In the /var/log/mail.log I see many error  messages related to the same thing from Postfix whenever an inbound mail is recieved.
    May 24 06:26:22 my.server.com postfix/postscreen[25712]: CONNECT from [62.13.138.73]:64283 to [192.168.0.3]:25
    May 24 06:26:22 my.server.com postfix/postscreen[25712]: fatal: error seeking /Library/Server/Mail/Data/mta/postscreen_cache.db: Invalid argument
    May 24 06:26:23 my.server.com postfix/master[54]: warning: process /usr/libexec/postfix/postscreen pid 25712 exit status 1
    Help!

    I'd guess that the postscreen database is missing or corrupt.
    please issue the following Terminal.app commands:
    postconf -n -c /Library/Server/Mail/Config/postfix/ | grep -i postscreen
    postconf -c /Library/Server/Mail/Config/postfix/ | grep -i postscreen
    and anonymize the output if and as desired.   If you anonymize, please consistenty replace the domain portion of your URL(s) to example.com, example.net and/or example.org (these are RFC-reserved bogus domains) and replace the server's host name to something else if that's more sensitive than "mail" or "www" or "server" — consistency in these changes is important — and alter any IP addresses included (other than 127.0.0.1 / localhost) to 10.20.30.40 (or some other private IP address — again, consistency in these changes is important — and then post that output here.
    Before making any changes, get a complete system backup or two, on an external disk.  That's your path back if something here goes badly wrong, weird or otherwise untoward.
    Once there are complete backups and entirely as a test / guess / experiment, I'd look to rename an existing postscreen database out of the way and see if a new cache database gets created, and would also check the file ownerships and protections of the files in that area.
    $ sudo ls -ale@ /Library/Server/Mail/Data/mta/
    Password:
    total 48
    drwxr-x---   5 _postfix  mail     170 Jan 30 15:20 .
    drwxr-xr-x  13 root      wheel    442 Jan 28 10:57 ..
    -rw-------   1 _postfix  mail      33 May  5 16:08 master.lock
    -rw-------   1 _postfix  mail   16384 May 24 08:22 postscreen_cache.db
    -rw-------   1 _postfix  mail    1024 May 24 10:04 prng_exch
    $
    The two files that are most interesting in the above are the . and postscreen_cache.db files.
    There is also an upgrade log around, and you'll definitely want to have a look in that — to see what (else?) went wrong here.  (Off the top, I don't recall the name of the upgrade log file.  In recent releases, it's usually something like /var/log/install.log — also check the system logs for "upgrade" messages.)

  • Yahoo push mail is not working

    After 2.0 upgrade, Yahoo push mail has stopped working. In settings "Fetch New Data" is set to "Push". But I don't get any news emails from Yahoo pushed to my iPhone. I have tried delete and reconfigure Yahoo mail, and also resetting the phone but still couldn't get push email to work.
    I've set a 25 message limit - I see 25 mails in my inbox but I also see 3 phantom messages the end. These 3 phantom messages show up with only the ">" sign with no sender or subject and I can't read them.
    Has anyone seen anything similar and have suggestions to resolve this? Thanks!

    I've had my iPhone for about a week now, one of the first to get it the Australian release. My yahoo mail was coming across fine for the first day or so but then it stopped. I removed the email account from the phone and re-added it. It hasn't even been able to grab my folders let alone my email. It just animates the little spinner and says "checking for mail..." forever.
    I just saw on another web site, somebody claimed if you removed the email account, went to yahoo and changed your password to something without special character, only letters and numbers, then re-add it that it would work. This based on the some story that the iPhone has trouble sending those characters. As my email was working at one point and since my password only has letters and numbers in the first place, I doubt this is what is going on. Here is the post, her instructions are in the comments: http://blogs.computerworld.com/iphoneand_yahooyahoo

  • (urgent) mailbfr -f   mail server not working anymore

    i ran mailbfr -f in the morning,  i found it took  like 40 hours to run and also it disable all the services. i got 1000 users using the mail server, so i searched on line it said it doesnt harm if i stop the mailbfr -f anytime i want. so i stopped it, but after that i found all users` old mails are gone. and i tried mailbfr -m username, to reconstruct the single account, it worked again, so i kept reconstructing some users but all of sudden, the mail server doesnt work any more. and i have no idea why this happen. i have to continue the mailbfr -f to finish the whole reconstruct of the database.
    i read many posts, they all say mailbfr is a good command and no harm, but it brought me big trouble. is there anyone had same problem before? anyone could help me with this? thanks so much.

    i ran mailbfr -f in the morning,  i found it took  like 40 hours to run and also it disable all the services. i got 1000 users using the mail server, so i searched on line it said it doesnt harm if i stop the mailbfr -f anytime i want. so i stopped it, but after that i found all users` old mails are gone. and i tried mailbfr -m username, to reconstruct the single account, it worked again, so i kept reconstructing some users but all of sudden, the mail server doesnt work any more. and i have no idea why this happen. i have to continue the mailbfr -f to finish the whole reconstruct of the database.
    i read many posts, they all say mailbfr is a good command and no harm, but it brought me big trouble. is there anyone had same problem before? anyone could help me with this? thanks so much.

  • Server App: Outgoing Mail Relay not working

    Hi,
    I'm trying to set up Outgoing Mail Relay on my Mountain Lion Server, but I always get bounced emails:
    Oct  1 04:33:34 my.server.private postfix/smtp[9582]: C855DCE700D: to=<[email protected]>, relay=mx2.sub5.homie.mail.dreamhost.com[208.113.200.128]:25, delay=0.91, delays=0/0.02/0.65/0.24, dsn=5.7.1, status=bounced (host mx2.sub5.homie.mail.dreamhost.com[208.113.200.128] said: 554 5.7.1 Service unavailable; Client host [myIP] blocked using zen.dnsbl; http://www.spamhaus.org/query/bl?ip=myIP (in reply to RCPT TO command))
    If I use in the SMTP servers list of Mail app, the exact same account credentials, the email is been delivered only when using SSL. So, I tried adding :465 and :587 to the ougoing relay server in the Server app (Relay outgoing mail throught ISP), but I get the following error and the message stays queued:
    Oct  1 04:13:41 my.server.private postfix/smtp[8920]: connect to mx2.sub5.homie.mail.dreamhost.com[208.113.200.128]:587: Connection refused
    Oct  1 04:13:41 my.server.private postfix/smtp[8920]: connect to mx1.sub5.homie.mail.dreamhost.com[208.113.200.127]:587: Connection refused
    Oct  1 04:13:41 my.server.private postfix/smtp[8920]: 0BAD1CE6340: to=<[email protected]>, relay=none, delay=369, delays=369/0.02/0.43/0, dsn=4.4.1, status=deferred (connect to mx1.sub5.homie.mail.dreamhost.com[208.113.200.127]:587: Connection refused)
    It seems I'm missing something. I want to use smtp account to send all the email coming from my Mac OS X Server, but it looks like I'm doing something wrong or the Server App doesnt work the same way Mail App does when connecting to a SMTP server.
    Any comments?

    Let me add....
    Mail app is connecting and sending the emails correctly with the same credentials but using SSL through port 25:
    READ Oct 01 05:04:01.566 [kCFStreamSocketSecurityLevelTLSv1SSLv3]  -- host:my.externalrelayserver.net -- port:25 -- socket:0x7f890be0c620 -- thread:0x7f890ca3dd70
    250-homiemail-a45.g.dreamhost.com
    250-PIPELINING
    250-SIZE 40960000
    250-ETRN
    250-AUTH PLAIN LOGIN
    250-AUTH=PLAIN LOGIN
    250-ENHANCEDSTATUSCODES
    250 8BITMIME
    WROTE Oct 01 05:04:01.588 [kCFStreamSocketSecurityLevelTLSv1SSLv3]  -- host:my.externalrelayserver.net -- port:25 -- socket:0x7f890be0c620 -- thread:0x7f890ca3dd70
    AUTH PLAIN  (*** 48 bytes hidden ***)
    READ Oct 01 05:04:01.793 [kCFStreamSocketSecurityLevelTLSv1SSLv3]  -- host:my.externalrelayserver.net -- port:25 -- socket:0x7f890be0c620 -- thread:0x7f890ca3dd70
    235 2.7.0 Authentication successful
    I would like to force Server App to do a SSL connection to port 25 of the specified relay server, but not sure how to do this. If I don't manage to do SSL on port 25, then, my relay server will bounce the emails...
    grrrr!

  • Outgoing mail server will work on Iphone but not Mail on Macbook

    My POP account will send mail on my iphone no problem, but on the mail program on my macbook it times out. All the account information is identical. The mail program keeps telling the server does not support port 995, but on the Iphone it does. I have tried changing the port but it still won't work. Suggestions please!

    misilulu, outgoing mail uses the SMTP protocol on ports, 25, 587 (for submission only) and, in the case of SMTPS, port 465 (rarely used and deprecated).
    The POP is used for incoming mail on ports 110 or, in the case of POP over SSL, 993.
    If all the settings between your iPhone and your MacBook are the same and you are having problems sending outgoing email on your MacBook it is most likely because you are using the wrong port. If you are using port 25 then it is most likely that your ISP is blocking that port for all mail servers except their own. If that is the case try the mail submission port 587. If that doesn't work then try 465 as a last resort.

Maybe you are looking for