Yahoo sync read only?
Why is Yahoo sync read only? That was the whole reason I've been waiting for 1.3.1 update. I use Yahoo for email, contacts, and calendar events, and one way contact listing is worthless for me (I want my contacts stored and viewable online, and being tied to my email is important).
Is this a temporary measure or is this pretty much a "lol switch to google" message?
Post relates to: Pre p100eww (Sprint)
I have to admit, like kalldrexx I'm disappointed with this as well. My story is the same: yahoo has always all of my contacts and is my primary e-mail provider. Without two-way sync, it's the difference between looking at a hot car and driving a hot car.
What exascerbates the issue for me is I've an outstanding open ticket with Palm where their backup servers mistakenly created a new Palm Profile for me under the same e-mail address my Pre is registered to, and I've lost about 120ish contacts - until they can somehow fix it. Yeah, having one-way yahoo sync helped fix some of that, my Pre is more up to date than Yahoo was and now I'm doubling up on effort to update Yahoo with what little my brain can remember.
Similar Messages
-
Is there no real "sync" with Yahoo contacts in 1.3.1? In other words, is it a 1-way "pull" from Yahoo? The release notes don't specifically say it is read-only, but they do say "download contacts from Yahoo". If so, can anyone say if that's temporary? I really wish I'd known that before I went to the trouble of merging all my Yahoo and Google contacts? I only created a Google account because yahoo wasn't available at launch -- I've had yahoo email for years and my contacts were already there and in Outlook.
-- robert
Post relates to: Pre p100eww (Sprint)Yahoo contacts being read only is an issue that does require resolution but I have also been experiencing long delays for updates on my phone. My Yahoo Contacts once updated take over 24 hours to sync with the phone even though I force a sync from the phone. I have only changed to using Yahoo since I updated to 1.4 so I do not know if this was an issue earlier. I used gmail previously but my dominant personal email account has been with Yahoo for over 15 years so keeping my contacts up to date in one location was much easier this way.
Has anyone had this problem? I have already done the "delete the Yahoo account" and load again after shutting down the phone. problem persists.
Thanks -
Creating read-only calendars for syncing
How can I create a read-only or protected calendar?
Is it possible to create a calendar which, after syncing with the family computer, would be read-only, protected or non-editable, by the family computer user?
Thank you,
cjYou're mixing metaphors here: 'publish and subscribe' and 'synchronize' are two independent processes. You can do both, but most users generally limit sharing calendar information to one or the other.
Publication creates a read-only, public object to which others can subscribe if they know your calendar URL. Calendars can be published on .Mac or on a private WebDAV server.
Synchronization allows the sharing of calendar data in read-write fashion across multiple machines or devices, generally for a single user. Groups can, to a limited extent, share such data with a .Mac family pack, or can use SyncTogether to share data among mixed workgroups, on a single machine among multiple users, across a subnet or over the internet.
How you enable these technologies depends upon what you want to achieve. If you want a calendar to be viewable by someone but not editable, then you publish it and let them know that they can subscribe to it. If you want someone to be able to edit one or more calendars on a selective basis, then you use SyncTogether to synchronize them by allowing another user read-write access to a collection (but not necessarily all) of your calendars.
You are starting at the head end of the process and attempting to configure these tools to offer services. What you need to do is just the opposite: determine what outcome you want to achieve, then configure one or more of the technologies to support that specific outcome. With SyncTogether, you can do that on a different basis for each synchronized user in your workgroup.
Publish only if you are willing to let non-editable data exist publicly. Subscribe if you want read-only access to one or more calendars. Synchronize if you want multiple users to be able to add, change or delete event and task data. -
Exchange: contacts sync from read-only folder
In the past, I have been able to set up a device to get its contact info from a read-only Exchange public folder (set with one-way sync). Setting up a replacement device, that option is greyed out and the folder in question cannot be selected. Desktop software version is 7.0.0.43; device is a Tour 9630 running OS 5.0. Help? We are not running BES.
I am going to give followup.
The problem was corruption of my brand new Imac 27. I went around and around with applecare and they finally figured out that my preferences were corrupted. Usuallly that can be fixed but they were unable. Basically, everytime I set the right connection to gmail up, it changed it...
Finally, I set up a new user account on my mac. I logged into that user and started all over again. Now everything works.
I spent hours and hours on this... I bought a mac because "It just works" No more fooling with the registry and spending forever in dread with tech support. OK, so Mac doesn't have a registry. It has libraries. I spent forever fixing it.. Felt just like my Windows experience. Hope this isn't a harbinger of things to come. -
CalDAV calendars sync as read-only
Hi!
I have a CalDAV calendar in iCal (Leopard 10.5.4) and can read-write-delete in iCal just fine. It syncs over to my iPod Touch, but as a read-only calendar--as if it were something I subscribed to. Is there a way around this? I imagine the same thing would happen on an iPhone.
Thanks!
CoreyNot to get off topic--but let's keep this to syncing CalDAV calendars to the iPod Touch and not a wish list of other features.
I'm still trying to find out if this is possible--having a CalDAV calendar sync to the iPod Touch as a read-write calendar.
Anyone else with some relevant feedback?
Thanks! -
HELP- "IPOD Cant Be Synced. The Disk is locked" Cant remove Read only
I cannot remove read only from the IPod Control folder. It won't let me. I cant load music to my ipod, which I previously have with same computer, itunes, everything. I have the most updated itunes, software, etc.
Can anyone help me? I have no clue what to do. I tried to right click on the ipod disk and run an error check. that didnt work. I'm clueless. Help!Hello Mark,
And welcome to Apple Discussions!
I don't really have any suggestions for you, but I can point you to an older thread where you might find help. Check out this old post from another forum member who managed to address this issue him/herself.
http://discussions.apple.com/thread.jspa?threadID=1651418
B-rock -
Disable Yahoo Sync after iCloud migration
I am getting this pop up and it's driving me bonkers. I don't even use Yahoo sync, but I guess it was turned on when I had MobileMe. After the migration to iCloud, my MobileMe prefs have been disabled and it refers me to the iCloud prefs.
Does anyone know how to turn this off? I tried doing searched but only found solutions that required me to be able to access MobileMe preferences. So, that is a non-working solution after iCloud migration.
Thanks in advance,
JenYes, this also driving me nuts. I gave in and said sync and it disappeared and never came back. Unfortunately, for some reason (possibly unrelated) my trial mobile me (I never paid for it), automatically appeared one day and took over 75% of all my contacts! I didn't know this and so I deleted the old mobile me account from address book which then deleted these contacts and then proceeded to wipe the rest of my devices!
I deleted all accounts off address book and reloaded a contacts back from a *.vcf file I had and presto everything back. As soon as I turned on iCloud sync again, so again did this flipping yahoo sync message appear again!
Is this because of old mobile me accounts even those that were just trials that are messing with apple cloud syncing? I have turned everything off and short of deleting my yahoo account I'm not sure what to try next! -
Clustering read-only bean-managed entity ejbs
I'm designing a data caching approach that relies on using read-only entity ejbs with bean-managed persistence. My design is based on the fact that WebLogic blocks on entity bean access by concurrent users for a given bean instance (unique primary key). I would like to keep only one entity bean instance active(timeoutSetting=0) for eacy primary key for all users to share. That way I only have to hit the database one time to initially populate data in the entity bean. I'm worried about this approach in a WebLogic clustered environment. From reading notes in this newsgroup and other doc, it appears that WebLogic might not use one instance of the entity bean (based upon unique primary key) in a clustered environment. Is that true (that being multiple users could get their own instance of the entity bean with the same primary key)?
Thanks,
Bryan
Typically, the read-write EJBs are on each WL server instance, so there is
no remote invocation -- it is all done by reference.
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Bryan Dixon" <[email protected]> wrote in message
news:[email protected]...
>
> I guess I'm confused about read-write (not read-only) entity beans being
pinned or not. This is from WebLogic 5.1 EJB doc:
> "read-write entity EJBs do not use a clustered EJBObject stub; a client's
method calls to a particular EJB always go to a single WebLogic Server
instance. If the server that a client is using fails, the client must
re-find the entity EJB using the cluster-aware home stub."
>
> Doesn't that mean the entity bean instance for a primary key is pinned to
a single WebLogic Server instance? Maybe I'm just misunderstanding
terminology about what a "particular EJB" is - I was thinking it is an
entity bean instance for a unique primary key.
>
> Thanks,
> Bryan
>
>
> "Cameron Purdy" <[email protected]> wrote:
> >>I was thinking that read-write entity beans were pinned.
> >
> >Not unless you pin them. Basically, that means that the JAR/XML that
> >contains/specifies the EJB only is on one server.
> >
> >> So if two separate weblogic instances in a cluster did a find on an
entity
> >ejb with the same primary key and then performed some business method on
> >that entity ejb, would there really be two separate bean instances in
each
> >weblogic instance for the same primary key?
> >
> >If it is not pinned, yes.
> >
> >--
> >Cameron Purdy
> >Tangosol, Inc.
> >http://www.tangosol.com
> >+1.617.623.5782
> >WebLogic Consulting Available
> >
> >
> >"Bryan Dixon" <[email protected]> wrote in message
> >news:[email protected]...
> >>
> >> Toa, thanks again.
> >>
> >> There are a couple of things I'm not clear about though. One is that I
> >want one instance of an entity bean per primary key, not a singleton of
the
> >entity bean itself. How would JNDI in a clustered environment help me
> >there?
> >>
> >> The other question I have is about having multiple instances of an
entity
> >bean for the same primary key in the cluster. I was thinking that
> >read-write entity beans were pinned. So if two separate weblogic
instances
> >in a cluster did a find on an entity ejb with the same primary key and
then
> >performed some business method on that entity ejb, would there really be
two
> >separate bean instances in each weblogic instance for the same primary
key?
> >>
> >> Thanks again,
> >> Bryan
> >>
> >> "Tao Zhang" <[email protected]> wrote:
> >> >
> >> >"Bryan Dixon" <[email protected]> wrote:
> >> >>
> >> >>The reason I was wanting one instance per primary key is that I want
to
> >use this entity bean to cache some data from database tables. This data
> >doesn't change frequently, so we were wanting to get it from this entity
> >bean's memory instead of constantly hitting the database. This data is
> >global to all users, so we don't want to store it in stateful session
beans.
> >> >>
> >> >>After reading more about the read-only cache-strategy it doesn't
appear
> >that any sycnhronization will occur if the entity bean for a given
primary
> >key is updated (state data is updated) in one weblogic instance, that
change
> >will not get synced up with other weblogic instances for that same
primary
> >key. Is that correct?
> >> >>
> >> >It's correct. If you do want to have exact one copy in the cluster.
You
> >can read Using JNDI in cluster environment.
> >> >
> >> >>If I deploy this entity bean with read-write cache-strategy the
WebLogic
> >doc reads as if I will get one instance per primary key that is pinned to
> >one WebLogic instance and I won't get any fail-over or load-balancing on
the
> >ejbObject (the entity bean instance). Did I read this correctly? If
that
> >is the case, what is the advantage of setting up read-write entity beans
to
> >be clusterable - just the Home objects? I definitely could be
> >misunderstanding something in the doc since I'm very new to clustering.
> >> "Tao
> >> >Zhang"
> >> ><[email protected]> wrote:
> >> >>>
> >> >
> >> >It's not only instance in the cluster. Probably many instances.
> >> >
> >> >If you use 2 tier clustering, failover will not happen because of
> >co-location. But if you use 3 tier cluster, you can write the special
code
> >in the client side to do failover and load-balance.
> >> >
> >> >In a 2 tier cluster, actually the ejb load balancing and failover is
> >almost useless.
> >> >
> >> >But in 3 tier, you can use it.
> >> >
> >> >Hope this help.
> >> >
> >> >
> >> >
> >> >>>"Bryan Dixon" <[email protected]> wrote:
> >> >>>>
> >> >>>>Thanks Tao.
> >> >>>>
> >> >>>>A couple more questions...
> >> >>>>I was planning deploying this entity bean with the read-only
> >cache-strategy which means our transaction attribute would be
> >TXN_NOT_SUPPORTED. Also, our db isolation is TRANSACTION_READ_COMMITTED.
> >> >>>>
> >> >>>>Based upon how I was planning on deploying this entity bean, would
> >WebLogic create an instance of the bean for each primary key in each
> >cluster? I'm just trying to figure out how many duplicate bean instances
> >for the primary key I could have across all clusters. I was really just
> >wanting one instance that is shared among all clients and was hoping that
> >the clustering would provide me with fail-over if that one cluster went
> >down.
> >> >>>>
> >> >>>If you use 3 tier cluster structure, it's impossible to know how
many
> >instances of ejb with the same primary key. Probably one instance for
each
> >wls instance.
> >> >>>In wls5.1, it's impossible to host only read only entity bean
instance
> >in the 3-tier cluster. Because read only entity bean are clusterable in
both
> >home and remote interface.
> >> >>>
> >> >>>>Regarding making the bean a pinned service, which it sounds like I
> >might have to do to get the results I want, how do I do that? Is that a
> >deployment descriptor setting? Also, if I make it a pinned service, do I
> >get any fail-over suport by clustering the bean?
> >> >>>>
> >> >>>For the pinned service, you can just deployed on one or several
server
> >instances. The per-server properties file is a good place to put the
> >weblogic.ejb.deploy property. If only one pinned service in the cluster,
you
> >can't get fail over. If the that server instance fails, the home stub
will
> >be removed from the jndi in other server instances.
> >> >>>
> >> >>>Why do you must need only one instance in the cluster? Do you want
> >exact-only-copy? You can read Using JNDI doc about its in cluster
> >environment.
> >> >>>
> >> >>>
> >> >>>
> >> >>>
> >> >>>>Thanks again,
> >> >>>>Bryan
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>"Tao Zhang" <[email protected]> wrote:
> >> >>>>>
> >> >>>>>
> >> >>>>>Bryan Dixon <[email protected]> wrote in message
> >> >>>>>news:[email protected]...
> >> >>>>>>
> >> >>>>>> I'm designing a data caching approach that relies on using
> >read-only
> >> >>>>>entity ejbs with bean-managed persistence. My design is based on
the
> >fact
> >> >>>>>that WebLogic blocks on entity bean access by concurrent users for
a
> >given
> >> >>>>>bean instance (unique primary key). I would like to keep only one
> >entity
> >> >>>>>bean instance active(timeoutSetting=0) for eacy primary key for
all
> >users to
> >> >>>>>share. That way I only have to hit the database one time to
> >initially
> >> >>>>>populate data in the entity bean. I'm worried about this approach
in
> >a
> >> >>>>>WebLogic clustered environment. From reading notes in this
newsgroup
> >and
> >> >>>>>other doc, it appears that WebLogic might not use one instance of
the
> >entity
> >> >>>>>bean (based upon unique primary key) in a clustered environment.
Is
> >that
> >> >>>>>true (that being multiple users could get their own instance of
the
> >entity
> >> >>>>>bean with the same primary key)?
> >> >>>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>>It's true. In a cluster environment, each wls instance can have
their
> >ejb
> >> >>>>>instance. The block of concurrent access to the ejb data is up to
> >your
> >> >>>>>transaction attribute and isolation level and your database.
> >> >>>>>
> >> >>>>>If you only want to keep one instance active, you can make the
> >read-only
> >> >>>>>entity bean a pinned service, to be deployed in one instance. But
the
> >> >>>>>network overhead is worse.
> >> >>>>>
> >> >>>>>
> >> >>>>>> Thanks,
> >> >>>>>> Bryan
> >> >>>>>
> >> >>>>>
> >> >>>>
> >> >>>
> >> >>
> >> >
> >>
> >
> >
>
-
I recently started getting a message popping up asking me for my Yahoo password and it references my email address that is attached to Yahoo Sync somehow. It happens very frequently and I don't know that I have ever done anything with sync and I want it to go away. Anyone else had this problem?
Thank you so much!!! I was having the same issue and I was going mental as welll!!
-
Bought a new Ipod for daughter for Xmas. How can I use ICLOUD to sync Itunes only to her IPOD
Bought a new Ipod for daughter for Xmas. How can I use ICLOUD to sync Itunes only to her IPOD and not everything else on my iphone etc?
On the iPod turn off iCloud for calender, contacts and other things (Settings>iCloud) and turn off automatic downloading for apps and books (Settings>Store).
Aldso go to Settings Messages and Facetime and add her own email calling/messaging address and delete the Apple ID calling/messaging address. -
An iPhone can be synced with only one iTunes library at a time
I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
"The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution. -
Access read-only LDAP for username/password, Directory Server LDAP for rest
Hello! I keep trying to find documentation on the above, but thus far I have been unable to find something that explains this well (and my attempts at figuring out thus far have failed).
I have a read-only LDAP that is used University wide, and I am not allowed to change how it currently operates. It uses double-bind authentication in that you search for a user to get their DN, then bind to that DN with the users password to see if it was correct.
I'd like to use the above setup to verify a user's credential as well as return some basic information about them (name, email, etc). After this, I'd like to use another freshly installed Directory Server LDAP to manage the roles that seem to be needed for Portal Server (as I cannot write to the original LDAP).
Any help or advice on the above would be appreciated! Thank you.The authentication you described is the default way LDAP authentication works.
AM Ldap auth-module allows you to 'pull' attributes from the LDAP server you're using for authentication and store it in it's 'amSDK' Directory Server - which is leveraged by Portal Server (if you're talking about Sun's Portal Server).
However this is only done if the profile is created (set 'dynamic profile generation' in auth - service).
As Portal Server does not support the new 'identity repsoistory API' of AM you have to stick to AM's legacy mode when using Portal Server.
To keep the the data in sync (if needed) you have to write a post-auth class.
-Bernhard -
Easy read-only access for noobs
Lightroom is a great product for the photographer, but for his spouse it's not so easy. I'd like an easy way to copy an image to the clipboard or export it to iPhoto to be used in other apps like iWeb.
My photos are stored on a server. It should be easy for my wife to go through the collection in read-only mode and use photos for blogs, emails, slideshows, etc without having to learn how to sync the directory tree, export from Lightroom and manage those temporary files. Currently the best process I can find is:
Use Bridge to browse the photos since only Adobe products can see the Develop settings for the RAW images.
Select the image and right-click Open-With Camera Raw
In Camera Raw Save the file as a JPEG into a temporary folder
In Finder, find the temporary folder, open the JPEG with Preview or drag the file to iPhoto
If It's in Preview, Copy the image to the clipboard for pasting into an app like Mail or iWeb.
It seems like we could eliminate several steps here if Adobe Bridge had a convert©ToClipboard option that would convert a RAW with Develop settings into a JPEG and then copy that JPEG into the clipboard for pasting into an application.
If anyone has a better approach, let me know.
Besides the cost overhead, it's not realistic for her to use Lightroom from her computer because Lightroom won't dynamically see folder tree changes without a Sync. Using Bridge she also loses out on virtual copies.
Thanks,
-Ryan.Pete,
Good point... that's true. I shouldn't say there aren't any programs that support XMP... there certainly are!
I don't know, though, of any application that can read - and more importantly *use* - the XMP data that's specifically related to the Lightroom Developer metadata.
An application can say that it has read/write support for XMP (which is actually not only for LR, but also for Photoshop and even PDFs), but that doesn't mean the application has to recognize - and honor - every piece of metadata contained within that XMP file. I think a lot of the applications listed on Adobe's website only support a subset of the Lightroom metadata: EXIF, IPTC, geocoding... that kind of thing.
So it's one thing to say that an app supports XMP, and it's another to say that an application fully supports XMP. If an image editor supported every XMP tag, it could take a RAW + Lightroom XMP file, pick up where you left off in Lightroom, save its own changes back to XMP, and Lightroom would recognize the other editor's changes. I don't think even Photoshop supports XMP to that level!
I don't know of any app that will read Lightroom's Developer metadata and display the same image that you see in Lightroom, which is what the OP was asking for and what I was addressing in saying there aren't apps that support XMP.
But, you're right, I was an over-sweeping generalization. So, let me restate more accurately
The XMP data is developed by Adobe, but it's a published standard so in theory anybody who wanted to COULD read the Lightroom Developer XMP/DNG data. But nobody does.
Of course, all this is a little academic because even if an organizer (e.g. Picasa) could honor all the Lightroom metadata and display the image "correctly", it wouldn't matter. The ultimate goal of the OP is to use the image in blogs, emails, etc. which is unfortunately still going to require a JPG. Maybe one day DNG and XMP will be as widely supported as JPG (which I think is Adobe's goal)!
Thanks for keeping me honest -
I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?
Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.
-
[Solved] Laptop Suspend puts Hard Drive into Read-Only
My problem is that s2ram brings back X (and the virtual console, if I'm on one), but never the hard drive.
s2ram -f -a 1 suspends just like s2ram -f. -a 2 and 3 just make a high pitched sound.
I tried both http://wiki.archlinux.org/index.php/Suspend_to_RAM and http://wiki.archlinux.org/index.php/Pm-utils methods.
I updated my BIOS drivers but that didn't help
s2disk works perfectly.
This is a COMPAQ Presario CQ60-215DX
Here is my log of the trouble during resume:
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
sd 3:0:0:0: [sda] Starting disk
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: limiting SATA link speed to 1.5 Gbps
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata4: limiting SATA link speed to 1.5 Gbps
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4: SATA link up <unknown> (SStatus 103 SControl 310)
And my full log:
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
Command line: root=/dev/disk/by-uuid/9ae7dfa5-74b2-41e2-89bc-b344bbf47109 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
libata version 3.00 loaded.
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:09.0: irq 25 for MSI/MSI-X
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part
ahci 0000:00:09.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004100 irq 25
ata4: SATA max UDMA/133 abar m8192@0xc0004000 port 0xc0004180 irq 25
ata2: port disabled. ignoring.
Clocksource tsc unstable (delta = 4397486409693 ns)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: TOSHIBA MK2555GSX, FG002C, max UDMA/100
ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/100
ata3.00: ATAPI: Optiarc DVD RW AD-7580S, FH03, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FH03 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 > sda4
sd 3:0:0:0: [sda] Attached SCSI disk
EXT4-fs: INFO: recovery required on readonly filesystem.
EXT4-fs: write access will be enabled during recovery.
EXT4-fs: barriers enabled
kjournald2 starting: pid 569, dev sda2:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: sda2: orphan cleanup on readonly fs
ext4_orphan_cleanup: deleting unreferenced inode 148384
ext4_orphan_cleanup: deleting unreferenced inode 147907
ext4_orphan_cleanup: deleting unreferenced inode 147903
EXT4-fs: sda2: 3 orphan inodes deleted
EXT4-fs: recovery complete.
EXT4-fs: mounted filesystem sda2 with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
ACPI: AC Adapter [ADP1] (on-line)
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:0a.0: setting latency timer to 64
sr 2:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
cfg80211: Calling CRDA to update world regulatory domain
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1f:16:74:cb:72
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 17
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 17, io mem 0xc0007000
ACPI: WMI: Mapper loaded
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 17, io mem 0xc0006000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [Z011] enabled at IRQ 16
ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 16, io mem 0xc0007400
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z010] enabled at IRQ 16
ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 16, io mem 0xc0008000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (68 C)
ACPI: Battery Slot [BAT0] (battery present)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (68 C)
usb 1-1: new high speed USB device using ehci_hcd and address 2
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
usb 1-1: configuration #1 chosen from 1 choice
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000
acpi device:13: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:10/device:11/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
usb 3-4: new high speed USB device using ehci_hcd and address 2
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
ath5k 0000:07:00.0: setting latency timer to 64
ath5k 0000:07:00.0: registered as 'phy0'
usb 3-4: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 20
nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 20 (level, low) -> IRQ 20
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
EXT4 FS on sda2, internal journal on sda2:8
Adding 3148700k swap on /dev/sda5. Priority:-1 extents:1 across:3148700k
scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 4:0:0:0: [sdb] Attached SCSI removable disk
scsi 5:0:0:0: Direct-Access USB Driver 0.00 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 5:0:0:0: [sdc] 7827456 512-byte hardware sectors: (4.00 GB/3.73 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sd 5:0:0:0: [sdc] Assuming drive cache: write through
sdc:
sd 5:0:0:0: [sdc] Attached SCSI removable disk
forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X
eth0: no link during initialization.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Stopping disk
ath5k 0000:07:00.0: PCI INT A disabled
forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
forcedeth 0000:00:0a.0: PME# disabled
forcedeth 0000:00:0a.0: PCI INT A disabled
HDA Intel 0000:00:07.0: PCI INT A disabled
ata2: port disabled. ignoring.
ehci_hcd 0000:00:04.1: PCI INT B disabled
ehci_hcd 0000:00:04.1: PME# disabled
ohci_hcd 0000:00:04.0: PCI INT A disabled
ohci_hcd 0000:00:04.0: PME# disabled
ehci_hcd 0000:00:02.1: PCI INT B disabled
ehci_hcd 0000:00:02.1: PME# disabled
ohci_hcd 0000:00:02.0: PCI INT A disabled
ohci_hcd 0000:00:02.0: PME# disabled
ACPI: Preparing to enter system sleep state S3
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Back to C!
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4001.76 BogoMIPS (lpj=6666816)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon Dual-Core QL-62 stepping 01
CPU0 attaching NULL sched-domain.
Switched to high resolution mode on CPU 1
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
CPU1 is up
ACPI: Waking up from system sleep state S3
ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00005, writing 0xb80005)
HDA Intel 0000:00:07.0: restoring config space at offset 0xf (was 0x5020100, writing 0x502010a)
HDA Intel 0000:00:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xc0000000)
HDA Intel 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
pcieport-driver 0000:00:14.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
pcieport-driver 0000:00:14.0: restoring config space at offset 0x1 (was 0x100107, writing 0x1005
nvidia 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
nvidia 0000:02:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001)
nvidia 0000:02:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xc400000c)
nvidia 0000:02:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
ath5k 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
nForce2_smbus 0000:00:01.1: PME# disabled
ohci_hcd 0000:00:02.0: PME# disabled
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: PME# disabled
ehci_hcd 0000:00:02.1: PME# disabled
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: PME# disabled
usb usb1: root hub lost power or was reset
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ohci_hcd 0000:00:04.0: PME# disabled
ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: PME# disabled
ehci_hcd 0000:00:04.1: PME# disabled
ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: PME# disabled
usb usb3: root hub lost power or was reset
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00005, writing 0xb80005)
pata_amd 0000:00:06.0: setting latency timer to 64
ata2: port disabled. ignoring.
HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:00:07.0: setting latency timer to 64
pci 0000:00:08.0: setting latency timer to 64
ahci 0000:00:09.0: setting latency timer to 64
forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
forcedeth 0000:00:0a.0: PME# disabled
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X
eth0: no link during initialization.
pci 0000:00:0b.0: setting latency timer to 64
ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
sd 3:0:0:0: [sda] Starting disk
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: limiting SATA link speed to 1.5 Gbps
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata4: limiting SATA link speed to 1.5 Gbps
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata4: SATA link up <unknown> (SStatus 103 SControl 310)
ata4.00: qc timeout (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4.00: revalidation failed (errno=-5)
ata4.00: disabled
ata3.00: qc timeout (cmd 0xa1)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3.00: disabled
sd 3:0:0:0: [sda] START_STOP FAILED
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 134590273
Buffer I/O error on device sda2, logical block 1094141
lost page write due to I/O error on sda2
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 135807281
Buffer I/O error on device sda2, logical block 1246267
lost page write due to I/O error on sda2
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 135815833
Buffer I/O error on device sda2, logical block 1247336
lost page write due to I/O error on sda2
JBD2: Detected IO errors while flushing file data on sda2:8
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 155463993
Aborting journal on device sda2:8.
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 155459417
Buffer I/O error on device sda2, logical block 3702784
lost page write due to I/O error on sda2
JBD2: I/O error detected when updating journal superblock for sda2:8.
PM: Device 3:0:0:0 failed to resume: error 262144
usb 1-1: reset high speed USB device using ehci_hcd and address 2
usb 3-4: reset high speed USB device using ehci_hcd and address 2
Restarting tasks ... <2>ext4_abort called.
EXT4-fs error (device sda2): ext4_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
ext4_da_writepages: jbd2_start: 1024 pages, ino 131086; err -30
Pid: 20, comm: pdflush Tainted: P 2.6.30-ARCH #1
Call Trace:
[<ffffffffa00d738d>] ? ext4_da_writepages+0x47d/0x4b0 [ext4]
[<ffffffff8026c6a4>] ? bit_waitqueue+0x24/0xe0
[<ffffffff802c8332>] ? do_writepages+0x32/0x60
[<ffffffff80321b7a>] ? __writeback_single_inode+0xba/0x490
[<ffffffff802406e6>] ? dequeue_task_fair+0x56/0x1d0
[<ffffffff8020a95c>] ? __switch_to+0xdc/0x3b0
[<ffffffff803223b3>] ? generic_sync_sb_inodes+0x193/0x530
[<ffffffff803229c5>] ? writeback_inodes+0x65/0x120
[<ffffffff802c85a6>] ? wb_kupdate+0xc6/0x160
[<ffffffff802c995b>] ? pdflush+0x16b/0x2a0
[<ffffffff802c84e0>] ? wb_kupdate+0x0/0x160
[<ffffffff802c97f0>] ? pdflush+0x0/0x2a0
[<ffffffff802c97f0>] ? pdflush+0x0/0x2a0
[<ffffffff8026c204>] ? kthread+0x64/0xc0
[<ffffffff8024af20>] ? schedule_tail+0x30/0x80
[<ffffffff8020d4fa>] ? child_rip+0xa/0x20
[<ffffffff8026c1a0>] ? kthread+0x0/0xc0
[<ffffffff8020d4f0>] ? child_rip+0x0/0x20
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126637417
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126637417
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126637417
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126637417
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126637417
done.
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 130097993
EXT4-fs error (device sda2): ext4_find_entry: reading directory #139292 offset 0
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126637417
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126004889
EXT4-fs error (device sda2): ext4_find_entry: reading directory #98457 offset 0
sd 3:0:0:0: [sda] Unhandled error code
sd 3:0:0:0: [sda] Result: hostbyte=0x04 driverbyte=0x00
end_request: I/O error, dev sda, sector 126004889
EXT4-fs error (device sda2): ext4_find_entry: reading directory #98457 offset 0
ANY help would be much appreciated.
Last edited by Cappy (2009-08-10 08:19:09)Nevermind .. *sigh* ... pci=msi on the kernel fixed it .. going to go cut myself now ...
Maybe you are looking for
-
Error When Trying to Schedule Webi report using SAP authentication
Hii, We are trying to Schedule Webi report in CMC for Group of Users using SAP authentication(SSO) ,While Trying this we are geting error Unable to Connect to SAP BW server Incomplete Logon Data ..(IES 10901) . Authorization done at BI side and Its w
-
Dear Experts: Is there any way to mass process several devices in IQ08. I have a bunch of devices for which I would like to enter the same data in a particular field. I cannot find a mass process option. (In the PM module, there is a similar transact
-
Hp 2310 monitor low volme high pitched sound - whining - low volume
My monitor makes a low volme high pitched sound But only if I go above 1400 x 900 resolution. Below that it is okay 2 years old. Otherwise not a problem. Brightness 45 Contrast 100 Backllight hours 12259
-
we have a simple layer3-4 port 80 app thta is being load balanced by ACE and created an HTTP probe that actually acts more like a TCP probe, since we took a default on just about all the attributes: probe http WEB_SERVERS expect status 200 200 Unfort
-
Someone please help! I am using IWEB 1.1.2 and I dont know how to do the following... I am updating my website and I want to put in meta keywords, but I dont know how to do it. Anybody any ideas? Also, trying to use google analytics, have downloaded