Yahoo Users - Is FTP Working For You Now?

The non-profit site I'm managing on Yahoo is suddenly connecting via FTP much better than it has been in the last month. I'm just wondering if other Yahoo users noticed this too. It was taking me about 20 connection attempts before it would connect, but now it's back to normal again - connects on first attempt.

hi suz,
my yahoo account is still **** slow! but i only need 19 connection attempts!
maybe they changed something over in the u.s. and germany has to wait!
max

Similar Messages

  • Is SMB working for you now? Not me.

    With the 10.7.3 update is SMB networking working for your devices?  Mine still isn't.  I have a Xerox Workcentre 7328 and I tried to use the SMB protocol to save network scans.  It still doesn't work.
    Right now I have networking scanning only working through a combination of 3rd party ftp activating application combined with a automator workflow to move scanned files from my server-based user account to a publicly shared folder on a connected volume.  Man this is messy.

    hi suz,
    my yahoo account is still **** slow! but i only need 19 connection attempts!
    maybe they changed something over in the u.s. and germany has to wait!
    max

  • How has Yahoo! Mail been working for you the last few days?

    Has anyone seen any improvements? What about sent mail, has everything actually indeed been sent? Has "push" mail improved? For me I've found all my sent mail has been sent since Monday AM, but I have been power cycling my iphone 2 to 3 times a day(maybe that has something to do with it), as far as "push" mail, still the same for me, sometimes I get the message right away, other times with a delay of around an hour.
    Cheers

    I don't send much email from my iPhone so haven't noticed any problems with that, but I have noticed Yahoo push working very well (virtually instantly) for the last couple of weeks. I have a job where my phone needs to be turned off on a daily basis and often 3-4 times per day. Take from that what you will...

  • I am using InDesign CC and added Garamond premier pro font. This has worked for months, now suddenly my entire book is  highlighted in pink and my font is missing! I get the message that the font is currently unavailable on my computer, how can i get it b

    I am using InDesign CC and added Garamond premier pro font. This has worked for months, now suddenly my entire book is  highlighted in pink and my font is missing! I get the message that the font is currently unavailable on my computer, how can i get it back?

    BlazingRiver wrote:
    So my computer is running on OSX but my question is if any of the viruses on my windows partition can still run and communicate information to their 'master' as there is still a supply of electricity? Sorry if its obvious.
    Here's a positive thing: Windows viruses can't run on OS X, but they can be transferred from OS X to other PCs (only if you have them on the OS X volume).
    BlazingRiver wrote:
    1. How could a trusted source e.g. Google and Steam contain viruses if they are downloaded from the original source? and
    You could get a virus from a different source that infected Steam and Chrome without any problem. Viruses normally try to infect as many files and programmes as possible.
    BlazingRiver wrote:
    2. Can iOS devices get viruses and I know this is probably in the wrong but 3. What anti-virus scanner and remover tool do you recommend for windows. The only one I am familiar with is Kaspersky?
    iPhones, iPads and iPods touch can't get viruses but they can transfer them to other PCs. For Windows, I recommend Microsoft Security Essentials

  • Does xf86-video-intel-git work for you?

    I have a Lenovo R61 laptop with intel chipset, and i used to use xf86-video-intel-git from aur :
    http://aur.archlinux.org/packages.php?ID=18678
    since last week it needed packages from new xorg. I installed new xorg from testing, build it and when i installed i could not use x. When i roll back to 2.9 from testing everything is fine.
    Does the git driver work for you or is it broken for some chipsets(can't really remember of mine right now)?
    edit: my chipset is GM965/GL960.
    Last edited by mechmg93 (2009-10-18 10:31:17)

    It sounds to me like either one of two things happened to you mechmg93. Either some incompatibility crept in with the new X server or your configuration became obsolete. Either way I think that this discussion is better with others that have [testing] enabled. Moving.

  • Mac OSX v10.6.5: How's it working for you with Premiere Pro CS5?

    If you've installed Mac OSX v10.6.5, let us know how it's working for you.
    Please make sure that you're using the most recent update for Premiere Pro CS5 before you report back. We don't want to waste our time disentangling problems that were actually fixed in Premiere Pro CS5 (5.0.2) from issues that still exist.

    So, here is my experience:
    http://forums.adobe.com/thread/751458?tstart=0
    Basically:
    Premiere Pro does not want to play the timeline (or the source window) anymore.  Sometime it plays for 2 minutes, sometime for 2 seconde and then stops, but most of time, it wont play at all.
    I can scroll over my timeline (no sound scrolling), but when I hit space bar (or clic on the play button) I can see the play button turning into a square (which mean it's now the stop button), but the timecodes doesn't run and the image doesn't play.
    So I suggest people to not being stupid as I was and to wait before to update... And hope a solution to come soon.

  • How is the New Forum Structure Working for You?

    Just wanted to ask how the breakout of CS5 and then other PrPro/Pr versions is working for you.
    Though not all that warm to the idea, I have to say that it seems to be working nicely. I have seen few posts in the wrong spots, though some might be better suited for Hardware.
    My fears have NOT been realized, so I am glad that the powers that be never consulted me, as I would probably have turned thumbs down. Early observations indicate that I would have been wrong.
    What do you think?
    Hunt
    PS - remember, "points" are at stake here folk!

    Well, since I was one of those who asked that CS5 be in a separate section, I like the fact that it now IS by itself
    As far as posts in the wrong place... that will always happen and all we can do is continue to point people in the right direction
    I scan for new messages in ALL the Premiere sub-Fora, and will continue to do so to keep learning

  • Which DDNS Provider Works For You?

    Hi,
    I have been struggling to find a DDNS provider from which the IP address can be updated from a Cisco device.
    One does not seem to support it, (Free-DDNS) other must be paid for (No-IP.org) while the free version does not update the IP address in my case, etc, etc.
    The device that is directly behind my modem is a Cisco 1801 router.
    My question is, which DDNS provider works for you when auto-updating the IP address via the Cisco router?
    Grtz, Dominic

    with IOS version 12.4 (and some versions of 12.3), DDNS is now available in the Cisco IOS.
    How to configure DDNS varies based on the DDNS service you choose. The  IOS supports two methods for performing DDNS updates: the popular  generic HTTP and the IETF standard based on RFC 2136.
    Cisco offers sample configuration strings for the following 7 DDNS services that use HTTP as an update method:
    DDNS
    TZO
    EASYDNS
    JUSTLINUX
    DYNS
    HN
    ZONEEDIT
    If you don’t have a DDNS service already, I would recommend choosing  one of these, or choose one that offers their own instructions for  configuring DDNS on a Cisco router, such as these configurations for the Cisco IOS DDNS service from no-ip.com.

  • Does BT Openzone work for you?

    I live in Central London and work in the City so I often find that my iPhone has connected to BT Openzone or The Cloud if WiFi is on.
    The reason I usually discover this is that it is taking an age to download something or to move to the next page in Safari. I usually have to switch off WiFi in order to get the much faster connection I can get in 3G.
    There is Cloud WiFi at Arsenal's Emirates Stadium and that appears occasionally on the phone but I can never get any downloads during a match via Cloud or 3G.
    All in all, it seems to me that the public wi-fi connection to the iPhone is useless and the only useful such connection is a personal/corporate one.
    What are other people's experiences? Am I doing something wrong?

    dbir wrote:
    Has anyone been able to get "DVR Manager" (go to Verizon's web site>My Verizon>Manage My TV, scroll down to "DVR Manager", click "Manage") to work?  I always get the error"  "We are having trouble communicating to your Set Top Box.".
    I just had FIOS installed (TV, internet, phone) last week.  Everything is working great.  Except this.  I've researched/tried lots of things unsuccessfully.  "Home Agent" doesn't know DVR Manager exists.  Neither does the online Automated Agent.  I tried Verizon's online chat help, but their suggestions didn't help either.  I'm wondering if it works for anyone, or is it some discontinued-but-still-advertised feature.
    If DVR Manager works for you, please tell me what you did to get it to work.
    -dbir
    Yes, has worked for years. And while I don't use it very much, I just checked, still works fine.
    Have you gone into the Menu on the DVR and set up the FiOS TV Remote DVR dialog? If not, you need to do so. You will need to set up a Parental Control PIN to access the dialog if you have not done so.
    Menu ==> Settings ==> FiOS TV Remote DVR ==> Web Access ==> and enable it (at least that is what I remember you had to do at that point)
    Hope this helps.
    Justin
    FiOS TV, 25/25 Internet, and Digital Voice user
    QIP7232, QIP7100-P2, IMG 1.9.1
    Keller, TX 76248 (VHO 1)

  • TS1363 For some reason my PC won't recognize my iPod and iPhone when I plug them in via USB.  It has worked for years, now I get an error message stating "unknown device"

    For some reason my PC won't recognize my iPod and iPhone when I plug them in via USB....they have worked for years, now all of a sudden I get a message stating "unknown device".  Any ideas for a fix?

    HI @madymessyy 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that when you originally connected your IPhone about a year ago it was recognized properly.
    Now when you connect your IPhone nothing happens but it does charger it, (until you used the last cable.)
    Herei is  a link from the microsoft.com that should help.Windows 8.1 and Apple iPhone 5
    One of the posters states this resolved the issue for him. How to restart the Apple Mobile Device Service (AMDS) on Windows from Apple support.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Search People "Put your profile to work for you"

    Hi all,
    I have an issue related with default search people in SharePoint 2013. When I search my own profile the result shows my profile (so far, good) but you can see:
    Put your profile to work for you                                            
    Number of searches that led to you:
    0 times last month
    0 times last week                                                     
    Last updated: Yesterday at 6:14 PM
    When I click to "Put your profile to work for you" I can edit my profile and save it but the message that I've written before always is showing when I search
    my own profile. Someone knows what have I do to doesn't show it? (Because is not truth, my profile have been searched more than 0 times).
    Thanks in advance,
    Victor Cea
    [email protected]

    Hi Victor,
    The "Number of searches that led to you" section should be "Self search" info searched by others per the following article.
    http://planningservices.partners.extranet.microsoft.com/en/SDPS/SAPSDocuments/SharePoint%202013%20Search%20Guidance.docx
    The update content should be crawled by Search crawler, then it would be queried and searched, you need to start a incremental crawl or a full crawl on user profile, then test again.
    Thanks
    Daniel Yang
    TechNet Community Support

  • How's Adobe Media Encoder CS5 working for you?

    This is the first thread on the new Adobe Media Encoder forum, so I thought that it would be appropriate to open it up by just asking a general question:
    How is Adobe Media Encoder CS5 working for you?
    Please be sure to install the Adobe Media Encoder CS5 (5.0.1) update. Instructions for updating are included in this post about the Premiere Pro CS5 (5.0.2) update.
    If you're having a specific problem that you want help with, or if you have a specific question, please start your own thread on this forum. This thread is intended for general feedback about how Adobe Media Encoder CS5 is working out for you.

    First of all IT IS GREAT and I use it a lot I also used the CS4 version before!
    But I have to report two issues about version CS5:
    1. I bought the English version of the production premium CS5 but I have a German operating system (win7 64bit) all other adobe application are in English except Adobe Media Encoder it shows up in German language! Not a show stopper but should be fixed.
    2. Recently I wanted to encode a video into an h264. I made some custom settings for that and the encoded video played very stuttered in Microsoft Media Player 12 (like 12fps instead of 25fps [settings were set correct in AME]) but fine in Quicktime and VLC Player (execpt for the gamma bug but that's an other story...)
    I did a lot of testings and found the issue! Sometimes when you change a lot of the h264 settings (don't know when it happens exactly) Media Encoder seems to not set the fps correctly allthough AME shows 25fps in it's settings this setting is not encoded into the final file!
    Quicktime and VLC seems not to care about the missing information but Windows Media Player gets confused.
    It does not happens when using a preset in AME it only happens when changing a lot and using custom settings!
    You can see the missing fps setting when right clicking the encoded file and choose properties (german:Eigenschaften) switch the tap to Details and there is no fps setting in the stuttering files but when encoded with a preset in AME there is the correct 25fps setting!
    I have attached a screenshots to demonstrate it:
    My workaround so far was to choose a preset with 25fps and close to my desired settings and change as few as possible - Fingers crosses and with a chance of 3/4 I was able to encode a working file containing the fps setting in it which plays perfect in Microsoft Media Player!
    I hope you take a look into this issue because if you have a long file and you have to encode it again because it fails....... uiuiui
    Thanks Todd for the possibility to give this direct feedback to Adobe
    This is real support!

  • What works for you?

    ok so i hear alot of people use brasso to get rid of scratches and others say it doesnt. i talked to people at best buy and they said it wouldent but then again.....it's best buy. that being said. what has worked for you or worked best? cus my screen is scratched and when i watch videos i can just barely see where they are and it bugs me . thank you.

    a pole? i believe i was asking what works to get rid of scratches lol i wasent asking what everyones fave was i was asking what works so i dont putt brasso on my ipod not knowing what it will do and it turns the screen into a murky lake.

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • MythArchive. Does it work for you?

    I have mythtv setup and everything working for me except this piece.  I've been fighting this for some time.  At first mytharchive simply would not start.  I outputted to a log and it said that the output to dvd had not been compiled in.  This was from the prebuilt packages in the Arch repos.  So I downloaded the source and compiled.  Then I was able to select what I wanted to archive and all, but it gave me errors when it actually got to the transcoding portion.  Some unknown variable name, sorry I've forgotten the exact because its been awhile.  So finally I decided to download the source for everything and compile that.  Well I can't get mythplugins to compile, because of unknown variable errors during the make.  At this point I have surrendered.
    My question is simply this.  Does it work for you with the latest releases?  How did you install?  Arch Packages?  Compiled from source?

    I had to get it working by compiling it myself i.e. using the mytharchive PKGBUILD, putting it in an empty directory and running makepkg.
    This version of mytharchive requires make clean on each build, or, as I did, it needs to be built from a clean directory. See this for more details..... http://www.gossamer-threads.com/lists/mythtv/dev/229431

Maybe you are looking for