Yamaha AC-XG audio device error "code 10" on Satellite Pro 6100

Please can someone help.
I am not getting any sound from my laptop.
In Device Manager and under the properties for the Yamaha AC-XG device it says it cannot start and quotes an error "Code 10".
I've tried uninstalling and reinstalling but I still have the same problem.
Can anyone tell me what Code 10 is and how to fix the problem.
Thanks

Hi
Jimi is right. You have to update the Yamaha sound driver!
After a short investigation I found this site:
[Do not install SP2 if you have a Yamaha AC-XG sound card|http://www.housing.hawaii.edu/resources/support/yamahaac-xg.htm]
Best regards

Similar Messages

Cannot ping localhost - error code 2 on Satellite Pro A200

Dear IT gurus,
I have a Satellite Pro A200 laptop.
When i ping the localhost, it says unable to contact ip driver, error code 2.
I tried to repair the winsock using microsoft's articles with no luck.
Now I want to reapair the operating system using the recovery DVD.
Does the recovery DVD have a repair option?
If not does any one know how to fix this problem?
Help please!!!!!
This is the result i got using the pc diagnostic tool.
Date 2008/08/30 01:47:12
[PC Information]
Model Name Satellite Pro A200
Part Number PSAF4U-00D004
Serial Number Y7312740Q
OS Version Microsoft Windows XP Professional 5.1.2600 Service Pack 2
BIOS Version 1.70
CPU Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
Physical Memory 1024MB RAM
Hard Disk Capacity 120,031,511,040 [Byte] 111.788 [GB]
Hard Disk Free Space Capacity 92,245,069,824 [Byte] 85.910 [GB]
Video Mobile Intel(R) 965 Express Chipset Family version=6.14.10.4833
Screen Resolution 1280 x 768 Pixels
Color Quality True Color (32 Bit)
Sound Realtek High Definition Audio version=5.10.0.5440
Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller version=10.14.6.3 MAC Address=
Intel(R) PRO/Wireless 3945ABG Network Connection version=11.1.0.100 MAC Address=
Modem TOSHIBA Software Modem version=2.1.77.0
IDE Device 1 TSSTcorp CDDVDW TS-L632H FW version=TO01
IDE Device 2 None
IDE Device 3 None
IDE Device 4 None
IDE Device 5 Hitachi HTS542512K9SA00
IDE Device 6 None
Internet Explorer 7.0.5730.11

Hi
>I tried to repair the Winsock using Microsofts articles with no luck
I assume you are meaning this MS knowledge base article:
[How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista|http://support.microsoft.com/kb/811259]
Well, I searched a little bit around and found out that the solution described on 811259 article doesnt help in all cases
So searched on 3rd party website and someone has suggested to try this advice.
Its also from Microsoft:
*[How to reset Internet Protocol (TCP/IP) in Windows XP|http://support.microsoft.com/kb/299357 ]*
So check it out maybe it helps
If not, then you might be forced to reinstall your OS because the repair option is not included in the Toshiba recovery CD ;(
Regards

Mass storage device and portable device ERROR code 31 41 HP PAVILION s5123w Desktop PC

I am using windows vista home premium 32 bit First time I pluged nikon camera into computer. Says installing device driver software but it does not install. Device manger under portable device digital still camera yellow question mark error code 31 under mass storage device error code 41. The device driver loads and installs on my daughters Laptop so ther is some thing wrong with my PC Every time I reboot computer windows need to intall driver software for your Microsoft WPD file system volume driver. Loacate and install driver software recomended says installing driver says successfully installed. I have to click Safely remove hardware usb mass stoage device multi flash reader usb device generic volume f I click stop says safe to remove I do not have a reader plugged in my computer. this happens every time I reboot> If you don't understand what I am talking about Let me know.
thanks Scott

Hey poochokid,
I'm sorry you're running into this issue. For the camera, if it's newer (made in the last 3 or 4 years) you may need to go to the Nikon website and find the camera software that is made for Vista. I could try to help you find that, if you could give me the model of camera you have.
For the Microsoft WPD file system volume driver issue take a look at this thread from another forum.
I hope this information helps! Let me know what the results are

Yamaha XG-AC Audio device not working after SP2 for XP was installed

Hi,
i'm new in this forum and maybe my question is a stupid one but i'm not able to solve this problem.
My Satellite 5200-801 doesn't make any sound after i've installed SP2 for XP. I tried to find a new driver for Yamaha XG-AC Audio Device( the one that doesn't work is 6.13.10.2152 (date 19/07/2002)but i was not able to find anything.
Please, could you help me ?
Thanks
Bruno

Hi,
I found another posting in this forum about this issue!
Your Satellite 5200-802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip does make problems with Service Pack 2 because MS regards the Yamaha AC-XG sound driver as being unstable. When Service Pack 2 is installed, Windows will disable the sound driver.
Here are some links which could help you!
Yamaha Generic Driver:
http://drivers.soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html
Relevant links:
http://www.yamaha.co.jp/english/lsiexp.html
http://support.microsoft.com/default.aspx?scid=kb;en-us;328435
Happy new year!
TOK

Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
and when i try to build it it giving me this error
Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
Anybody encountered this problem? Thanks I appreciate it.

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

Hello,
I am becoming increasingly frustrated with Encore as it now seems that I cannot burn a bluray to a disc. I would love to be able to talk to someone in support at Adobe but that does't seem to be an option. I have attempted to burn a video that is 18.45GB (transcoded) to a 25GB BD-R disc with the following error received on both attempts:
"Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064"
I don't understand this error because there should be plenty of room on the disc? I also had an issue a few weeks ago with Encore preventing me from burning a 20.4GB transcoded movie onto a 25GB disc. This may be unrelated and I am aware of the issues in Encore regarding the calculation of file size, but why am I now experiencing issues all the sudden?
My configuration:
Mid-2012 MacPro
OSx 10.8.5
Adobe Creative Suite CS5.5 (Encore CS5.1)
Internal MCE Technologies Blu-ray burner
I appreciate any help and support!!

The Code 3 AS_StorageError comes in many variations.
Google: encore "AS_StorageError=-97060" and you'll find a bunch issues. Now replace the 97060 with your specific code (97064) and you'll see there are no finds other than your thread.
These all appear to have physical storage, hard drive, or media issues. Keep in mind that for Blu-ray especially, Encore uses a huge amount of temporary storage.

Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

Hi,
First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
In simple , First create an Image then Burn that image to BluRay .
I hope, it will help you.
Thanks

Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060

I just wasted 2 Blu-Ray discs trying to burn a project. I was trying to burn a very simple project: a two-chapter Blu-Ray with two 55 minute episodes of a TV show on it. I have used the exact same computer recently to do exactly the same job with success, so I don't know what the problem is.
There are no menus in the project: it's just a bare-bones auto play disc with stereo sound only. The disc shows 24.37 GB used on a single-layer BD.
The files are conformed and as the build begins, the following error pops up:
Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060
System info:
Windows 7 Professional
Service Pack 1
Intel i7 8 cores @ 2.80 GHz
12 GB 1600 RAM
AMD Radeon HD5870
WD 3TB HD 7200 RPM NTSC file system
Pioneer BD-RW BDR-206 ATA burnerncore
Adobe Encore CS6

I do not see another example of this error with the "97060" in it.
I never trust my recollection of this, but note that the 24.37 GB may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get a different error, but who knows.
I would try building to a folder to see if that succeeds. Then you can return to the issue of burning. Many of us prefer ImgBurn for burning rather than Encore.

Yamaha AC-XG Audio device Blocked

I have NO sound on my Toshiba 6100 Satellite Series laptop. I used to have sound. But then my IPOD NANO (4) crashed my laptop, and I had to get a new hard drive, but NOW a new message pops up every time I start the laptop -- refers to my Yamaha AC-XG Audio Device being DISABLED because it is known to have a problem with Windows. Well it never had a problem with Windows before. How do I get my sound back? The ONLY difference now is that I have INTERNET EXPLORER 8.

Toshiba 6100 Satellite Series laptop.
Might it be this model?
Satellite Pro 6100
If so, the original driver for the Yamaha AC/XG sound chip does not work after you install a service pack to Windows XP.
Windows XP Service Pack 1 and 2 incompatible with existing Yamaha sound driver
You need to install this driver.
Windows XP/SP1/SP2, 2000 Sound Driver for Yamaha AC-XG sound systems
-Jerry

Blue-ray Error: "device error", Code: "3"?

Does anyone know how to resolve a Blue-ray Error: "device error", Code: "3"?

I don't think we know a single solution.
See this thread:
http://forums.adobe.com/message/4328748#4328748
The link I refer to in post 1 (that refers to removing previous authorscriptsessions) is not relevant to CS6 - where they appear to automatically remove the old sessions.

Audio driver error, code 10 error & Media device missing Error in Presario C772TU

Hello Hi to all,
I am Manikandan.D working in BOSCH India and new user for this forum.
I am having presario C7712TU model laptop, recently i reinstalled my Xp OS service pack 2.
after that i reinstalled all drivers, but it showing some error in audio device driver.
the error code is 10 and it is telling "media device missing"
I have installed UAA driver + conexant HD audio driver
Moreover i couldnt find any wireless LAN icon in network connection tab.
could any body help me..Since i am in Germany..Now helpless!
it is big trouble for me!!!
Many thanks in advance to all!

Dear Daniel,
Thank you very much for your reply and effort, help!
Yesterday i have installed Atheros driver...Now my wifi also turned on without any problem.
I think you doing great job for all the people. keep the same spirit and continue the support!
this has to be appreciated! why because some people they will break the head for the system problem.
you are giving solution for the headache not for the system!!!
anyways now my problem is solved thanks...!
if possible send me your mail id to the below address.
<text deleted for privacy>
i will keep in touch with you!
Message Edited by WendyM on 10-21-2009 07:04 AM

Problem with PnP devices, Unknown device, error code:28

Hello, my USB Mass Storage Device Not Recognized( Flash drive- HP v156w, 16 GB)
Full story : I opened flash disk, started to loading and opening files very slow, suddenly all writing, names of the files become unreadable. I took off the flash disk and try again. I got the message- disk have to be formated to be used
again. After a lot of try I got this message:
Unknown device doesn't have a driver ; and Problem with PnP devices when i run trouble shoot in devices and printers on my Sony VAIO laptop( Windows 8, 64 bit), and error code:28 for unknown device doesn't have a driver.
Do other usb devices work ok in the same usb port? - yes
Has someone else/or you used it on another pc?- yes
Does it work ok on a different pc? - the same problem
Did you pull it out with using 'Safely Remove Hardware'? - yes, a lot of time after its become invisible, unknoun
Was it previously working ok with your W8 laptop? - never tried befor
Disk Management can't see the drive.
device manager:
usb device with yellow sine and instead name strange sines
divice tipe - other devices
manufacturer - unknown
location- on USB Mass Storage Device
status: The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
I have done that -
"open device manager make sure show hidden devices is ticked and right click on all the USB hidden devices and unistall them. once done reboot and put in the flash drive again and see if windows finds it."
situation the same(((( Disk Management can't see the drive.
please if any one know the fix please help
Its very important info for me on the flash disk.

I'd ask them over here.
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

When Audio Console launched, Unable to find audio device error message comes

When I launch audio console, I get an error message saying:
"Unable to find audio device. Please make sure that your audio device is enabled and installed with its driver. This application will be closed."
This can't be right because my soundblaster audigy 2 ZS platinum card is installed, its working, I can hear things etc.
I uninstalled and reinstalled the audio console software package from creative and that fixed the problem for a very short while and it is now reoccurring.
I've had this same setup for several years with no issues, now all of a sudden, this is happening.
Anyone out there had similar challenges?
Thanks for looking!Message Edited by dgmtoronto on 07-22-200703:33 PM

Most probably you don't have passed the correct root= option to the kernel so that the kernel cannot, as it says, find its root device. Read the wiki page about refind in order to know how to configure it (https://wiki.archlinux.org/index.php/REFInd). Refind as no fully automatic configuration like grub.

Tomahawk Player - Sporadic "Problem Accessing Audio Device" Errors

Hi, I have recently started using Tomahawk Player in GNOME and some songs from external sources can play and others receive an error that states:
"Sorry, there is a problem accessing your audio device. Make sure you have a suitable Phonon backend and required plugins installed."
However, I have phonon, phonon-gstreamer, and phonon-vlc installed.
How can I further diagnose this?
Last edited by bdamos (2014-11-30 19:48:16)

Hello,
That is unfortunately a not-very-helpful error message as it could mask a variety of problems. One of those problems is that it might happen if Tomahawk is unable to play the url for the track---what source has it resolved to? (rightmost column)?
Feel free to come ask us on Freenode (#tomahawk) and our forums on forum.tomahawk-player.org. You'll probably get a better response there.

Yamaha AC-XG audio device error "code 10" on Satellite Pro 6100

Similar Messages

Maybe you are looking for