Yamaha AP-u70 stopped working as Output device with Leopard upgrade

Hello,
I have upgraded my PowerBook G4 to Leopard. The only problem I see, is that my external sound device, a YAMAHA AP-U70, which worked nicely as a sound output device, is now only recognized as Input device.
When I log the plug in with USB Prober, I see:
1246.486 [1] [0x7dc5800] USB HID Interface #3 of device YAMAHA AP-U70 USB Audio @ 2 (0x1b100000)
1246.487 [3] IOUSBCompositeDriver[0x50cd100]::start USB Generic Composite @ 2
1246.749 [3] AppleUSBOHCI[0x26f4800]:ControlPacketHandler error 0xe000404f occured on endpoint (0). todo = 0x40 (Clearing stall)
1246.749 [2] AppleUSBOHCI[0x26f4800]::ControlPacketHandler, returning status of e000404f
1246.750 [3] IOUSBDeviceUserClientV2[0x2a50400]::DeviceRequestIn (sync < 4k) err:0xe000404f
1246.750 [3] IOUSBDeviceUserClientV2[0x2a50400]::DeviceRequestIn < 4K to Apple Internal Keyboard/Trackpad - returning err e000404f, size: 0
1246.754 [3] AppleUSBOHCI[0x26f4800]:ControlPacketHandler error 0xe00002ed occured on endpoint (0). todo = 0x60 (Clearing stall)
1246.754 [2] AppleUSBOHCI[0x26f4800]::ControlPacketHandler, returning status of e00002ed
1246.754 [3] IOUSBDeviceUserClientV2[0x2a50100]::DeviceRequestIn (sync < 4k) err:0xe00002ed
1246.754 [3] IOUSBDeviceUserClientV2[0x2a50100]::DeviceRequestIn < 4K to IOUSBWirelessControllerDevice - returning err e00002ed, size: 0
1246.756 [3] AppleUSBOHCI[0x26f4800]:ControlPacketHandler error 0xe00002ed occured on endpoint (0). todo = 0x60 (Clearing stall)
1246.756 [2] AppleUSBOHCI[0x26f4800]::ControlPacketHandler, returning status of e00002ed
1246.756 [3] IOUSBDeviceUserClientV2[0x2a50100]::DeviceRequestIn (sync < 4k) err:0xe00002ed
1246.756 [3] IOUSBDeviceUserClientV2[0x2a50100]::DeviceRequestIn < 4K to IOUSBWirelessControllerDevice - returning err e00002ed, size: 0
1246.797 [3] IOUSBDeviceUserClientV2[0x2a50100]::DeviceRequestIn (sync < 4k) err:0xe00002c2
1246.797 [3] IOUSBDeviceUserClientV2[0x2a50100]::DeviceRequestIn < 4K to EHCI Root Hub Simulation - returning err e00002c2, size: 0
Has anybody an Idea, what happens and if this issue can be resolved?
kind regards,
André

Use another audio output device, is the way I see it. I don't think this issue will be addressed, there simply aren't enough of us to warrant any time spent on a fix. I'm going to start looking at other USB D/A converters, and just run their analog output to one of the analog ins on my Yamaha. Or scrap the yamaha altogether for something with a little more headroom and cleaner PA stage -- love my AP-U70 as I may, it was always a bit rough around the edges, and started clipping -- even soft clipping -- way too soon. My biggest concern is how I was under the impression that as long as USB audio worked, my Yamaha would work, since I thought USB audio was a common platform that all devices played nice with. If that's the case, how many more smaller-user-base USB devices are being dropped from the "friendly" list during OS updates? Will I plug an older digital camera in one day to find that it is no longer supported? Or my Harmony remote? What next?

Similar Messages

Yamaha USB Receiver UP-200 Fails as Output Device in Leopard

So it worked perfectly in tiger. now it only shows up as input device.
please help, please. I'm so lost.

Hey, thanks for the quick reply. I didn't think anyone would so I didn't check the forum.
Okay— so it's a USB stereo receiver made in 2001 by yamaha. It plugs in via usb cable and takes direct output of audio signal and then processes it in the device. some other guy had a problem with another model,
Hello,
I have upgraded my PowerBook G4 to Leopard. The only problem I see, is that my external sound device, a YAMAHA AP-U70, which worked nicely as a sound output device, is now only recognized as Input device.
When I log the plug in with USB Prober, I see:
1246.486 [1] 0x7dc5800 USB HID Interface #3 of device YAMAHA AP-U70 USB Audio @ 2 (0x1b100000)
1246.487 [3] IOUSBCompositeDriver0x50cd100::start USB Generic Composite @ 2
1246.749 [3] AppleUSBOHCI0x26f4800:ControlPacketHandler error 0xe000404f occured on endpoint (0). todo = 0x40 (Clearing stall)
1246.749 [2] AppleUSBOHCI0x26f4800::ControlPacketHandler, returning status of e000404f
1246.750 [3] IOUSBDeviceUserClientV20x2a50400::DeviceRequestIn (sync < 4k) err:0xe000404f
1246.750 [3] IOUSBDeviceUserClientV20x2a50400::DeviceRequestIn < 4K to Apple Internal Keyboard/Trackpad - returning err e000404f, size: 0
1246.754 [3] AppleUSBOHCI0x26f4800:ControlPacketHandler error 0xe00002ed occured on endpoint (0). todo = 0x60 (Clearing stall)
1246.754 [2] AppleUSBOHCI0x26f4800::ControlPacketHandler, returning status of e00002ed
1246.754 [3] IOUSBDeviceUserClientV20x2a50100::DeviceRequestIn (sync < 4k) err:0xe00002ed
1246.754 [3] IOUSBDeviceUserClientV20x2a50100::DeviceRequestIn < 4K to IOUSBWirelessControllerDevice - returning err e00002ed, size: 0
1246.756 [3] AppleUSBOHCI0x26f4800:ControlPacketHandler error 0xe00002ed occured on endpoint (0). todo = 0x60 (Clearing stall)
1246.756 [2] AppleUSBOHCI0x26f4800::ControlPacketHandler, returning status of e00002ed
1246.756 [3] IOUSBDeviceUserClientV20x2a50100::DeviceRequestIn (sync < 4k) err:0xe00002ed
1246.756 [3] IOUSBDeviceUserClientV20x2a50100::DeviceRequestIn < 4K to IOUSBWirelessControllerDevice - returning err e00002ed, size: 0
1246.797 [3] IOUSBDeviceUserClientV20x2a50100::DeviceRequestIn (sync < 4k) err:0xe00002c2
1246.797 [3] IOUSBDeviceUserClientV20x2a50100::DeviceRequestIn < 4K to EHCI Root Hub Simulation - returning err e00002c2, size: 0
Has anybody an Idea, what happens and if this issue can be resolved?
kind regards,
André "
and I can only guess that the same thing's happening to me.
I have a powerbook g4 aluminum, 1.5 ghz. And re: yamaha helping out, I would imagine it's so old they just don't care anymore.

On iMac 2011 stopped working audio output.

On iMac 2011 stopped working audio output.
Is it possible to transmit a signal through the audio input?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Has anyone else had problems since downloading latest update? My iTunes stopped working and mobile device won't download, I now don't have Apple to backup my iphone?

Has anyone else had problems since downloading latest update? My iTunes stopped working and mobile device won't download, I now don't have Apple to backup my iphone?

As i've posted in this thread:
http://discussions.apple.com/thread.jspa?threadID=746408&tstart=30
I've tried everything others have suggested without any luck.
Now I'm stuck with a 300 bucks mp3 jalopy.
My big question here is :
why aren't we hearing from apple? why aren't they saying something like "yeah we messed things up but be patient. we are trying our best to fix it..." ?
I was thinking to buy the macbook pro but now I'm afraid of the day things will get messy with that too.
Pentium 4 Windows XP

When i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos.

when i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos. NOT A ROUTER PROBLEM. all my other apple devices dont have this problem

iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao.

I have ipad 2. Safari stopped working. Screen appears with light gray cover. Some websites show errors when debug is on. But how actually can I debug or fix it? Thank you.

I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
But how actually can I debug or fix it? Thank you.

Here are a couple suggestions:
1. Go into Settings > Safari and Clear Cookies Clear Cache
2. Fully close Safari: from your home screen, double tap your home button and the most recently used Apps will show up. Hold your finger on the Safari App until all Apps start jiggling. You'll see a minus sign on the upper left side of Safari. Touch the minus and Safari will fully close. Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
3. Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
After iPad comes back up, try Safari again, and you should be good to go.

Siri stopped working on my iPhone 5 after upgrading to iOS7

Siri stopped working on my iPhone 5 after upgrading to iOS7...Does anybody know how to fix this problem?

To use Siri:
1. It must be on (Settings > General > Siri)
2. You must be connected to the internet
3. You must be in an area where Siri is permitted (it is not permitted, for example, in certain countries).

Right USB Port stops working after disconnecting device since 10.9.2

Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
   User 11%                    System 10%
Max %CPU by process (name, UID, %):
   WindowServer         0   4.6
Loaded extrinsic kernel extensions:
   at.obdev.nke.LittleSnitch (4052)
   com.driver.JRDUSBModemData64 (4.0.5)
   com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
   net.sourceforge.MonolingualHelper
   com.oracle.java.JavaUpdateHelper
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.freemacsoft.appcleanerd
   com.adobe.fpsaud
   at.obdev.littlesnitchd
Loaded extrinsic user agents:
   com.oracle.java.Java-Updater
   at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
   at.obdev.LittleSnitchUIAgent.plist
   com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
   at.obdev.littlesnitchd.plist
   com.adobe.fpsaud.plist
   com.freemacsoft.appcleanerd.plist
   com.microsoft.office.licensing.helper.plist
   com.oracle.java.Helper-Tool.plist
   com.oracle.java.JavaUpdateHelper.plist
   net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
   com.freemacsoft.appcleanerd
   com.microsoft.office.licensing.helper
   com.oracle.java.JavaUpdateHelper
   net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
   /System/Library/Extensions/JRDMassStorageDriver32.kext
             (No bundle ID)
   /System/Library/Extensions/JRDMassStorageDriver64.kext
             (No bundle ID)
   /System/Library/Extensions/JRDUSBModemData32.kext
             (com.driver.JRDUSBModemData32)
   /System/Library/Extensions/JRDUSBModemData64.kext
             (com.driver.JRDUSBModemData64)
   /System/Library/Extensions/LittleSnitch.kext
             (at.obdev.nke.LittleSnitch)
   /System/Library/Extensions/NoSleep.kext
             (com.protech.NoSleep)
   /Library/Audio/Plug-Ins/Components/A52Codec.component
             (com.shepmater.A52Codec)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
             (com.oracle.java.JavaAppletPlugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/JavaControlPanel.prefPane
             (com.oracle.java.JavaControlPanel)
   /Library/PreferencePanes/NoSleep.prefPane
             (com.protech.NoSleepPref)
   /Library/QuickTime/AC3MovieImport.component
             (com.cod3r.ac3movieimport)
   /Library/Spotlight/LogicPro.mdimporter
             (No bundle ID)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
   Library/QuickLook/Pacifist.qlgenerator
             (com.charlessoft.pacifist.qlgenerator)
   Library/Services/Clip to Day One.workflow
             (No bundle ID)
Login hook:
   /Library/Scripts/Hooks/login.sh
Global login items:
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
User login items:
   iTunesHelper
   Sparrow
   Sort Menubar Items
   AppCleaner Helper
   SurplusMeterAgent
Safari extensions:
   Shut Up
   AdBlock
   SafariKeywordSearch
   Disconnect
   MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
          MacBook Air - model: MacBookAir3,1
          1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
          APPLE SSD TS064C disk0 : (60.67 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 59.81 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          EFI (disk2s1) <not mounted>: 209.7 MB
          Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
          disk2s3 (disk2s3) <not mounted>: 189.89 GB
          Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
          at.obdev.nke.LittleSnitch          Version: 4052
          com.driver.JRDUSBModemData64          Version: 4.0.5
          com.protech.NoSleep          Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
                 [loaded]          at.obdev.littlesnitchd.plist
                 [loaded]          com.adobe.fpsaud.plist
                 [loaded]          com.freemacsoft.appcleanerd.plist
                 [loaded]          com.microsoft.office.licensing.helper.plist
                 [loaded]          com.oracle.java.JavaUpdateHelper.plist
                 [loaded]          net.sourceforge.MonolingualHelper.plist
Launch Agents:
                 [loaded]          at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          Sparrow
          Sort Menubar Items
          AppCleaner Helper
          SurplusMeterAgent
3rd Party Preference Panes:
          Flash Player
          Java
          NoSleep
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              12%          com.apple.WebKit.Networking
               6%          Safari
               4%          WindowServer
               3%          EtreCheck
               2%          hidd
               1%          Terminal
               1%          notifyd
               1%          opendirectoryd
               1%          com.apple.WebKit.WebContent
               0%          Dock
Top Processes by Memory:
          147 MB          Safari
          137 MB          com.apple.WebKit.WebContent
          49 MB          mds_stores
          29 MB          com.apple.WebKit.Networking
          27 MB          TextEdit
          23 MB          WindowServer
          20 MB          Disk
          20 MB          Sparrow
          20 MB          CVMCompiler
          18 MB          Finder
Nothing out of the ordinairy. Thanks for any help

It's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH

WRT54G - wireless just stopped working on all devices

Hi All,
I've had my WRT54G for a couple of years and have my Desktop hard wired (to the router) and 2 laptops and an ipod connecting wirelessly succefully for the past 2 years.Woke up this morning and nothing will connect wirelessly,finding the router is intermitent and when it does it cannot establish a connection with it. I can connect the devices via the network cable directly to the router and all works fine, it's just wireless that has suddenly stopped working.
I have tried 'turning it off and on again" turning WEP off, changing WEP password etc. but nothing seems to work. Im at a loss as to why my entire wireless network/connection has just stopped working?
Any ideas?
Message Edited by coldfuel on 02-06-2009 07:36 AM
Solved!
Go to Solution.

I'm having a similar problem. This past month or so, the router just kicks my wireless computers off the network. Then I can't find the network at all. My work around has been to go into the wireless setting (via my hard-wired computer) and change the wireless channel from 9 to 11 or vice versa. This keeps the network connected for a day or two and then kicks us off again until I change the channel.
I've looked into the solution previously posted of upgrading the Firmware but I'm having a difficult time doing so. I'm on a Mac and the firmware downloads seem to be for PC. The other problem I'm having is that my model is WRT54GS (no version number). Should I assume this is version 1.0? I think so. Anyway, like I said, when I download the firmware for that unit, it shows up as a bin file (WRT54GSv3_4.71.4.001_fw,3.bin). I then expand it and it becomes a cpgz file (WRT54GSv3_4.71.4.001_fw,3.bin.cpgz). And back and forth, over and over again.
How can I upgrade my firmware on my Mac?
PS> Current Firmware Version: v2.07.1
Message Edited by Enyko on 08-19-2009 07:05 AM

Satellite Pro L670-18F PSK3FE Webcam stops working become "Unknown Device"

The *webcam* on my *Satellite Pro L670-18F PSK3FE* which is running *Windows 7 64-Bit* worked fine until this week. My notifications bar started to say *"unknown USB device"* and when when I went to use the webcam it was no longer working.
When I turned the webcam off in the BIOS the notification stopped but when I turned it back on the notification kept coming up again. The unknown device is clearly the webcam.
I have updated my BIOS and tried system restore.
I have also downloaded the driver for the webcam from http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have been trying to run that - +but it NEVER seems to finish installing!+ I will keep trying to reload the driver and see if that helps but as of now I do not believe that the driver will help.
If this is only a driver problem could someone suggest how I get the driver to actually install :-(
I am now at a loss. I am unsure what to do now. Suggestions?... +please!+

Hi
Unknown device means that the driver is not installed.
I think the webcam driver installation should fix this.
Since the face recognition use the webcam too, I recommend uninstalling this tool as well as the old version of webcam software.
Both (or just face recognition) should appear in control panel -> software
Now download the both applications from the driver page.
Start with webcam driver installation:
1) Unzip the webcam driver package
2) The TC30049700N.exe can be unzipped too (right click -> extract here)
3) Now you should see different files exe, dll, and others try to execute the setup.exe to start the installation. If this does not work, go to device manager, mark the unknown USB device (webcam) and install the driver pointing to the extracted folder containing the webcam driver files. The system should pick up the dll files automatically.
4) Reboot the notebook and follow with face recognition software.
Good luck

Why did my voice texting stop working on all devices?

All of a sudden my voice for texting and IMessage stopped working on both my ipad mini and iPod touch.
It is enabled in settings and I have tried a hard boot.

Github is not a CDN (content distribution network). Github is a script download repository. You must not directly link to scripts on Github because they lack proper headers and will fail to load across many browsers, firewalls and proxy servers.
You can safely use scripts hosted on recognized CDNs like Google api, Microsoft, jQuery, Cloudflare and others.

<script src="http://code.jquery.com/jquery-latest.min.js">
</script>

<script src="http://cdnjs.cloudflare.com/ajax/libs/jquery.cycle2/20130409/jquery.cycle2.min.js"></script>
Personally, I prefer to use scripts hosted on CDNs whenever I can because it makes the web faster for everyone. However if you can't find your plugins on CDNs, then you must download the scripts & host them on your own servers.
Nancy O.

My 2nd mini iPad in a year and same problem happened,it stopped working. what's wrong with mini iPads?!

I got a replacement to my daughter’s iPad mini in September b/c her 1st one stopped working and now it happened again. I took it to the Apple store and i was told that there's nothing they can do. What's wrong with the iPad minis?

I have an iPad mini and it works great, so do many other people.
Is it possible your daughter abused the device? If it gets dropped, even in a damage proof case, it is a shock to the iPad. Most survive, but if it happens often, it might be a problem.
Charging often, not completely, leaving in charger while in use a lot?
Leaving the iPad in a hot car, or freezing the iPad?

Network stops working in Tecra M9 with Vista OS?

We have four Toshiba tecra M9 (2.2ghz T7500 processor) laptops with factory installed windows vista business version and one with fresh non toshiba installation of Vista Ultimate version. All these laptops have exactly same problem.
Network sometimes stops working and nothing but restarting computer helps?
Thing is that usually you cant event restart computer because it hangs to logging off or to shutting down state.
Theres no clear reason to this hang and it happens now and then.
Sometimes many times a day and sometimes it works for days. Doesnt matter if you are docked or undocked. We have several desktops pcs and other brand laptops with exactly same configuration/programs and no problems.
Any help would be great because users are not very pleased to this situation and we wouldnt want to change back to windows XP (which is working in M9 without problems).

All vista updates are installed to all these computers. BIOS is newest 1.50 that is available from web site. Toshiba Value Added Package for Windows Vista (v1.1.7; 12-14-2007; 38.89M) package is only new driver that has released from Toshiba since purchase of these machines. Four factory installed Vista M9 models have original driver versions (not sure if they are newest ones). One Vista Ultimate has drivers downloaded from Toshiba support site and it even has Vista Servicepack 1 RC-1 version installed.
I installed that new value added package two days ago and no networks hangs yet but still have to wait because it might work for week and then start hanging again.

Yamaha AP-u70 stopped working as Output device with Leopard upgrade

Similar Messages

Maybe you are looking for