Yamaha Motif 8 with a Macbook. Please Help!!!
I'm getting extremely frustrated because I just bought a Macbook and it isn't recognizing my keyboard. I installed a recent generic driver from Yamaha that is supposed to work for all of their keyboards, it is listed in my midi drivers folder, but I don't see it in the audio midi setup. Am I doing something wrong? I'm a new mac user. The Keyboard is connected via a USB out built into the board (But this model only transmits midi information and no audio). There is no icon popping up in the finder like it would if I plugged in an external hard drive. Why won't this thing work? Please help!!
The latest driver is good to go with 10.5 Here is how to check if the board is being recognized. Go into system preferences while the board is on and connected via usb. At the very bottom in the "Other" section you will see Yamaha Midi-USB. If it shows you an active window where you can manipulate ports then it is being recognized. If the window is "grayed out" then there is something wrong with the connection. (Just as a general rule, I would not plug the USB connector into a hub unless it is powered.)
If you open Logic, play the board, look at the transport window and it should show which notes you are playing.
Similar Messages
-
Hello, I have a MacBook pro retina 13" early 2013, 2,6 GHz Intel Core i5 and Intel HD Graphics 4000 1024MB,
and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!Hello, Righten.
Thank you for visiting Apple Support Communities.
I understand that you want to know if your MacBook Pro will support a 4k display. Here is an article that will answer your question.
Using 4K displays and Ultra HD TVs with your Mac
Cheers,
Jason H. -
Problem with my macbook -PLEASE HELP!
when i swtch my macbook on the sceen lits up for two seconds and then goes black. i tried all the instructions in the booklet but when i was installing the mac os x again (had the first disc in) there came a note that i have to replase disc 1 by disc 2. then i checked that i had the right setting that all my info wouldnt disappear when installing again and then it just started to install the thing even tho i still had disc 1 inside and before that it told me to change the disc. ok that was probably ok but then in the middle of installing disc one my macbook's sceen went dark again. when i started it again it seemed that i was in the same point where i started from. how can i continue from this? can my precious info still be saved? if i now continue installing do i start from the beginning? i live in a small town and no one else here has a mac and im not very good with any computers. PLEASE HELP!
macbook Mac OS X (10.4.8)Your data could possibly be saved....If the installation didn't full complete, your data should still be on your hard drive. As for you MacBook, it sounds like a MAJOR problem and should be brought to an Apple Genius at once.
It is possible for them to obtain your data and get it to you somehow. You should bring this to your Apple store, and, judging that you have the service plan, they will replace or repair your laptop accordingly.
I haven't heard anything of the sort for the MacBook, so, hopefully someone has and can further your troubleshooting procedures before you take it in and risk being away from your laptop for a week or so. I would opt for taking it to your Apple Store.
Remember to mark as helpful or solved.
-benny -
i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them
Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers. -
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116did you find a fix?
-
My Ipod wont Sync with ITunes! Please Help!
My Ipod wont Sync with ITunes! Please Help! I have the latest version of Itunes, but my ipod will not sync with my laptop. The diagnostic test has no answers and says everything is normal. When i try to sync, it says "an unknown error occurred (-39)". Any suggestions?
check for any viruses
-
My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....
No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.
-
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
I am unable to install adobe flashplayer onto my 3-4 year old macbook - please help!
I am unable to install adobe flashplayer onto my 3-4 year old macbook - please help.
Moved to Installing Flash Player
-
The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help it has been like this since Monday! Furthermore, it appears fine when I view my Yahoo! e-mail while using the Google Chrome web browser.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me
What e-mail are you talking about?
What exactly did it say?
Are you sure that the e-mail was not your receipt? -
Hi
When i am trying to restore backup to my iphone, its coming up backup is not compatible with iphone. Please help me restore.
Thanks
MandyFrom the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them. -
i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest
Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
hi , i have this extension .f4v ,and i couldn't match it with any think please help me , thank u
http://en.wikipedia.org/wiki/Flash_Video
-
i can't read in Mavericks DVDs and Bluray data burn with UDF system files burn with Snow Leopard, please help me. Thanks
They are DVDs with video files from a little more than 2 GB per file, were burned in Snow Leopard, with UDF file system, now that I updated to Mavericks when I try to read disks displays the directory in the finder a moment and then disappear and does not display them show them more. It is impossible to read the discs, but only those who were burned with UDF file system. Thank you for your help.
Maybe you are looking for
-
I have an SQL Server function to take a JDEdwards numeric date and convert it to an SQL Date field. CREATE FUNCTION [dbo].[date_ccyyddd_to_mmddyyyy] @JulianDate as Numeric(18,0) RETURNS Date AS BEGIN Declare @ResultDate as Date Set @ResultDate = D
-
Settings for monitor using thunderbolt to vga cable
Have an HDTV Bought a cable for thunderbolt port on macbook pro to vga. Hooked it into vga port on tv, and got backgound screen saver, but no icons or menus on tv. What settings do I need to change?
-
Enter Account Name and Password
"To use this machine for Automatic Downloads, enter your Apple ID and password." This pop-up window appears again and again and again and again......... what happened to iTunes now? I don't want to have to keep entering my password. I've done it s
-
Passing Multiple Parameters to SQL Script from a Shell Script
Hi Friends, I have SQL script which accepts 6 parameters. I am calling this from a shell script as shown below: sqlplus -s ${ORACLE_ID} @${SQLPATH}KORONT_041.sql ${USER_ID} ${PDC} ${item_number} ${KORDC} ${PDCSET} ${last_Updated_in_hours} Out of the
-
I have been using the seach feature in the clippings for years and love it! Suddenly it isn't showing the graphics when I do a search. The dialogue box appears that indicates that the search is happening and show the number of matches found but none