Yamaha Motif XF Into Logic Pro x?

I am trying to run multiple tracks out of my Motif XF keyboard into multiple tracks in Logic Pro X via firewire. I just want to record about 5 - 8 channels in Logic while I am playing multiple parts on seperate tracks on the keyboard.
Thanks for any help you can give me.

After initially messing around with the MIDI Environment box for a while, adding Channel Splitters, eventually I found out that it's as simple as:
In Project Settings > Recording, check the box to "Auto demix by channel if multitrack recording". And make sure you've got Software instruments for each channel needed.
Bingo.

Similar Messages

How can I use the sounds of the Yamaha Motif XF6 in Logic Pro 9?

I have Logic Pro 9 on my Mac Book. I also have a Yamaha Motif XF 6 synthesizer. Instead of using Logic's software instruments I would like to record the sounds of the Motif directly into Logic.
I have been told that an audio interface is necessary for this. What kind of audio interface would be good for this? Any in particular?
And, once I have obtained the interface, what steps do I need to take to hook up the Motif into Logic to utilize the Motif's sound bank?
Detailed steps would help, as this is new stuff for me.
Thanks!

Since this is a user forum only, and your questions will take a lot of time to answer you might want to check both the Logic manual and the XF6 manual. The XF6 has possibilities such that you may not need and Audio interface if the Firewire option is present.
Also you have a built in USB MIDI interface as well, you will need to download the Yamaha MIDI driver.
Read Exploring Logic Pro, especially chapter five, you can record your performance via MIDI, edit it and then commit to audio.
Dig in.

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

Mainstage Ultrabeat into Logic Pro 8?

Hi,
Does anyone know how I could Export a Mainstage "Ultrabeat" (not just a loop but say a five minute improvision jam) into Logic Pro 8, so I could improvise over it in Logic Pro 8? Especially the rhythm combinations. Thanks!

I think you can use something like Soundflower to route audio from one app into another.
You can always just open the same UB channel strip setting in Logic and do everything in there that you would do in Mainstage.

Transferring Files from Triton Le (via Smart card) into Logic pro 9

I'm trying to get original material from my triton Le smart card into Logic pro 9. I've looked at a couple forums and tried different ways. I know i can do it track by track/ real time audio, but would prefer having it as midi, as i've found cutting and splicing the realtime has produced some glitches in the music. The other way was to use a usb floppy disk drive save my material as midi on the floppy then open it in logic. This i've tried but must be missing something because i drag the file from my 17n1 card reader (which reads my smart card) into the floppy and it just takes the file as it is.
This will get figured out soon, some help would be great!!!

HI guys first thanks for all the replies amazing that some one still listen to these post thanks ,especially i saw pancenter involved in many logic related problems so wow man keep going thanks .
what i did today i completlly reinstal my apple mac book pro ,instaled logic pro 8 on it and boom all is working with no problem so this mean that Mac pro has same pice of software which is making whole thinks bad. i will try to unistal cognitone and also maybe rewire i all ready did follow the link above (http://support.apple.com/kb/TS3968) but it did not help i will try to unistal cognitone ( by the way it is awesome programm ) such a sad story or maybe i just start from scratch .will post here on progress Thanks very much guys .

How do I load an AU instrument (Garritan ARIA player) into Logic Pro X on a Mac Mini OSX 10.8.5

how do I load an AU instrument (Garritan ARIA player) into Logic Pro X on a Mac Mini OSX 10.8.5 ?

You install the player .component in the Library/Audio/Plug Ins/Components folder (though an installer probably does that for you) and install(er) the sample content wherever you want, then you start Logic (the new plug in will be validated during startup), open or create a project, create/use a software instrument track, instantiate the player in an Instrument slot, and in the player itself you choose the sound(s) you want to play and load those.

How do I import a project from GarageBand into Logic Pro X?

Trying to imporrt all my projects from Garageband into Logic Pro X.

Open Logic X. Go to the help menu and select "logic pro help." Type garageband into the search bar. You will have one result to choose from.

How to import VEC1-3 packs into Logic Pro 9. help plz

Hello everyone, not sure if this has been answered (couldn't find nothing by searching) but i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
any help would be appreciated. thank you!

JSNP77 wrote:
i need help trying to import the VEC1,2,3 (Vengeance Essential Club sound pack) into logic pro. The samples/sounds/loops are all wav format.
There are "free download" EXS presets - look at the bottom of the [home page|http://www.vengeance-sound.com/eng/indexes/indexFreeSounds.html] "Vengeance EXS Presets" and download.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Unable to import wav sounds into Logic Pro X

I've been struggling with uploading all my sound kits into Logic Pro X. They are wav files. Every tutorial I watch has features that I don't have for some reason. Please help!

Hi
kcelik wrote:
Every tutorial I watch has features that I don't have for some reason.
Have you enabled all the Advanced Tools in the Logic Pro X;Preferences choices?
CCT

Does GB import into LOGIC PRO

can i open any new Garageband file
the latest of GB 6.0.5.
into LOGIC PRO
and does it fit nicely and easy
for those who have used it
thank you very much
gl

Simply take your GB project .... closed .... and drop it on the Logic image. Should open right up.
Peace ,
P. Dreadie

Rewire Mainstage into Logic Pro / internal soundcard

Hey there, Logic Users!
I noticed that some of the Mainstage sounds are not too shabby and I would like them to load into Logic Pro.
Since my external soundcard is pretty much fried, I wanted to know if there's a way to rewire Mainstage into Logic Pro using the internal soundcard that the iMac provides?
Thanks for all the responses,
VN

videonoob wrote:
I noticed that some of the Mainstage sounds are not too shabby and I would like them to load into Logic Pro.
Hi
Mainstage and Logic share exactly the same plugins, channel strip settings and the like (with the notable exceptions of Playback and Loopback, which are only available in Mainstage).
There should be no need to attempt to hook up Mainstage to Logic simplly to load any sounds into Logic. Save the plugin presets or channel strips in Mainstage, and then Load them in Logic.
CCT

Dropping beat into logic pro only puts 1 minute of a 3 minute beat help

Im taking a beat from iTunes and dropping it into logic pro x but the beat is 3 minutes long and logic pro will only take about 1 minute of the beat how do i stop it from cutting the beat that short

1) Yes.. Either you can reinstall from the DVDs you got as part of the Boxed set of Logic Studio 2/Logic Pro or.. if you purchased Logic Pro via the app store, download it again by going to the App Store app on your new Mac and going to the purchased tab which, after signing in using your Apple ID and password, will allow you to download Logic once more.
Note: In regards to the DVD boxed set... Some of the modern Macs no longer come with DVD/CD drives built in so you should make DMG images of your DVDs using your old Mac and the Disk utility... and store them on an external Hard Drive which you can then contact to your new Mac and install Logic from
2) You can select several regions at the same time and move them as you wish..
If you hold down the option key you will actually be able to make a copy of them and when you move them the originals will still be left in place..
See these pages of the User Guidel for more info
http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=13
http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=15
There are lots of other useful information about regions and tracks found in this main section of the User Guide
http://documentation.apple.com/en/logicpro/usermanual/#chapter=13%26section=0

Adobe Audition Into Logic Pro 7?

Do you know if there is a way to import adobe audition 2.0 files into Logic Pro 7? The reason I ask is beacsue someone wants me to work on a project for them and they recorded all their tracks for 5 songs in AA 2.0. I know garage band imports fine into Logic, but what about AA 2.0?
Any plugins out there?

Nope... beyond Adobe and Apple not exactly being best buds... Audition is a PC only application (for now...Mac release slated for 07).

Can't connect Yamaha P-35 to Logic Pro X

Hello.
I am running an iMac with OS X Mavericks (10.9.2), 2.9 GHz Intel Core i5 Processor with 8GB 1600 MHz DDR3 memory.
I am using Logic Pro X and am trying to get my Yamaha P-35 Digital Piano to act as a Midi controller. I have a USB to MIDI adapter cable, consisting of both an In and Out 5-pin Midi cable running through to a USB plug. I have my USB plugged into my iMac and the MIDI plugs in my piano. There are 3 lights on the adapter cable, Midi, USB and one with a musical note above. Only the USB light is lit up.
My aim to use the piano as a controller, to play Logic Software instruments with but Logic seems to not be aware of the piano being plugged in. I am looked on Yamaha's drivers page also and there is not one for this device, only older models.
Any help would be appreciated.

Try reversing the in and out on the keyboard end.... if you havent tried that already.... as these cheap cables sometimes are mislabelled... and given how you are using the keyboard, you only need the out from the keyboard going to the in on the cable...
Other than that, yes, almost all of the cheap midi usb cables have the same issues.. Some work... some work some of the time... and more often some don't... not reliably at least..even if they are the same brand/model... There is no way to know for sure until you try them out.
The real solution is to get yourself a decent midi interface or better still, an Audio/Midi interface like a Motu for example... which has stable, reliable drivers... and a build quality using decent components. Using a cheap interface or cable with a Mac... is akin to putting $50 tires on a $300k Ferrari... They kind of work but the end result isn't real driving..... and you are degrading the Ferrari's performance down to that of a 15K family sedan

Importing AAF files into Logic Pro 7.1

Hello All:
Have got a number of song sequences that are in the AAF format, complete with associated audio .aif sound files in the same folder.
These AAF files were created on another Logic pro studio, as they had to export them from Pro Tools into AAF .
i am able to IMPORT the sequence arrange with requisite tracks set up, but when the audio files attempt to load, i am prompted by the finder to MANUALLY locate each audio file to enable it to place into the Logic arrange page correctly.
I get the "where is the file"xxxxxB4Wrww.aif" type message, and can see the actual file located in the finder window, but it won't just locate them automatically.
It takes a loooong time to search out in the list each file and then click DONE to enter it!
Then repeat for EACH file name.....jeez.
One song has 78 audio files associated with it!
A local tech guy in a MAC software dealership said this was a continuing problem he had also with AAF in Logic 7.....
Any hints, before i spend 4 mind numbing hours hand-locating
these frikkin files?
Thank you in advance!

sonidox wrote:
Hi All,
I've recently been having problems importing MP3 files into the arrange window. I thought I changed a setting and can't figure out what's up? Also I haven't been able to change my sampling rate to 48K or more. Mind you, I'm in transition right now moving to a different continent and my external drive is stored away so I'm playing and importing from my OS drive.Is that the issue??
Thanks,
Francisco
Hi Francisco.
Please re-post this as a NEW question. I just went over my last few posts, and here you are, and NO ONE has answered your question in three days. That is not usually the case in this forum.
Cheers
PS please give some details, what actually happens with the mp3 files? what is the actual problem? And also, what sound card / interface are you using?

Yamaha Motif XF Into Logic Pro x?

Similar Messages

Maybe you are looking for