Yamaha p200+motu fastlane midi interface=GB not recognizing midi device =0(

tried hooking up my motu fastlane midi interface to my yamaha p200 and to my mac mini for use in garageband. GB is not recognizing a midi interface. i read elsewhere that i may need a driver, but would it be for the yamaha p200 (keyboard) or the motu fastlane midi interface? or is it a driver for garageband??
please help!!

You need Motu's midi driver...Go to their site for the current version...in the Downloads section.
You will need to log-in or register if you haven't already.
Once installed and restarted you need to set up your midi connection in Apple's: Audio Midi Setup utility and connect the Fastlane to the Yamaha...
Link here if helpful:
http://www.showmeprotools.com/apple-ams-audio-midi-setup-for-pro-tools/
Just imagine the Pro-Tools interface is the Fastlane...
Typically the manufacturer model and names are no longer supplied in the Properties window. You can enter whatever names you want in that section. It doesn't matter. So don't worry if it's blank or not as shown in the link.
If you want to use the internal sounds of the P200 then you will need to use the analog output connections from the P200 into the analog inputs of an audio interface...using a real instrument track.

Similar Messages

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

My I-pod shows up on my computer but is not recognized under devices in I-Tunes, any suggestions?

Hey corky60,
I'd go ahead and give the following troubleshooting steps a shot:
1. Try the iPod troubleshooting assistant:
2. Restart the iPod Service
3. Restart the Apple Mobile Device Service
4. Empty your Temp directory and restart
5. Verify that the Apple Mobile Device USB Driver is installed
6. Change your iPod's drive letter
7. Remove and reinstall iTunes
8. Disable conflicting System Services and Startup Items
9. Update, Reconfigure, Disable, or Remove Security Software
10. Deleting damaged or incorrect registry keys
You can read more about each step in detail in this article:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
I'd start at the top and work through the steps until iTunes recognizes your iPod nano.
Take care,
David

My dvd drive not recognized in device manager,getting the yellow explanation mark.

my dvd drive not recognized in device manager,getting the yellow explanation mark. Tried uninstallingdevice drive and scanning for new hardware. scanned for updates, etc. I getting no results. The laptop is a Pavilion DV5. Thanks

Hi,
It could be that the drive has a Hardware issue, but try the following.
From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, open Device Manager, right click the DVD drive and select Uninstall. When this has completed, restart the notebook and let Windows rediscover the device and check.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Anyone having trouble with this phone and their in car bluetooth? Calls dropping not recognizing the device. Had the car bluetooth reset at dealer. They said it is a common problem with the iPhone?

Bluetooth in car is not recognizing my device and when it does it will only stay connected about 5 minutes. Blue tooth has been reset at the dealer. They said it is very common with the iPhone? The car is a 2014 Toyota Highlander. This is very very frustrating as I have a 45 minute commute to work and do not want to have to hold my phone.... Thank you for any help.

sstaylor2001 wrote:
I have already done all of that. It still doesn't work. My husband has the same phone and a 2013 toyota and his is fine. Toyota told me it is the brand new cars and the new apple update. Need to figure something out. This phkne is useless now and I've had a iPhone for 5 years
Wow you would think the newer car is just an updated version of what your husbands has.
I wonder if your husbands car was updated to the same connect system if his would not connect?
Does your husbands phone work because he does not have the new iOS from Apple?
Can he hook to your connect system in the car?

USB is not recognizing the device and giving error 10

My PC USB is not recognizing the device (iphone) and giving error 10.. The USb is malfunctioning but ipod is getting connected easliy

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.

My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to enable us to restore to factory setting

My child has disabled her ipod and i have had to reinstall itunes which is not recognizing the device to allow me to restore ipod to factory setting.

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Computer not recognizing my device

had to reset my ipod touch. Now when i plug it up to my computer the computer is not recognizing my device and syncing.

See:
iOS: Device not recognized in iTunes for Windows

Itunes does not recognized my device what will i do

itunes does not recognized my device what will i do

BigTarantula99 your link says:
If you have an iPod touch, see iOS: Device not recognized in iTunes for Windows.

HT1923 i have installed the updated itunes but it is not recognizing my devices can anyone help

i have installed updated version of itunes but it is not recognizing my devices can anyone help

Many thanks.
That suggests that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Itunes not recognizing any device

itunes not recognizing any devices - old or new

iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591

My iphone is blocked and I am being told to pluig it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?

My iphone is blocked and I am being told to plug it in to itunes but the itunes it was set up with is not recognizing the device - can anyone help?

I also live in the United States so redownloading shouldn't be a problem.

[solved] Digital Camera not recognized in device-manager

My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)

I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

Dc/dvd drive not functioning and not recognized in device manager after installing Windows 7 OS

I have an HP Pavilion laptop, model # dv9617nr, which was originally loaded (from the factory) with Windows Vista. I upgraded the OS to Windows 7 a few months ago, and initially, everything worked fine. Within the last month, however, my DVD/CD ROM optical drive stopped working and is not recognized in Explorer, and does not show up in Device Manager. I have tried a number of fixes from this forum and the Microsoft Windows 7 forums, with no positive effect. I should note that upon inserting a disc in the drive, everything sounds normal (device spins and the external LED lights up) but nothing happens and the unit shuts down.
I have no idea if this is a software or a hardware issue. I did check the HP website for software and driver updates for my model and the Windows7 OS, but HP has no update for this PC running this OS. ANY help is greatly appreciated.

Hi
Please find the link given below might help you to fix the issue on your unit.
Troubleshooting CD or DVD Drive Detection Problems
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Itunes not recognizing my devices after installing 11.1.4

As per itunes message to update to latest version, I updated to 11.1.4 on my PC. I'm running windows 8.1, 64 bit. After updating and restarting computer, itunes will not recognize any of my devices. iphone4s, ipod touch 5g, ipod touch 4g. The devices "are" recognized on the computer when plugged in via usb. I guess this would indicate that the usb cables and the drivers are good.
All of my itunes libraries for the associated devices open up just fine. All of the contents are in tact. It's just that the device is not recognized in itunes when opened. Any suggestions would be much appeciated.

Windows 8.1, 64bit
It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
I tried many things, I may have missed a step below. But the following is what I believe was the fix - since it worked on a 2nd PC.
Make sure you are using an administrator account. Any of them on your machine will do for the following
a) Get Windows to restart the drivers:
    - disconnect your USB device and close ITunes
    - connect your USB device
    - if ITunes loads, close it.
b) File explorer:
Open File explorer and browse to
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
In that folder there should be a set of files named "usbaapl64...."
right click on the one ending in "INF"
Select Install. It's very quick.
remove the USB device
c) Restart the computer.
When you login again, load ITunes before you attach your USB device.

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

Yamaha p200+motu fastlane midi interface=GB not recognizing midi device =0(

Similar Messages

Maybe you are looking for