Yaourt and packer always telling me "one or more packages did not pass

Ive been using Arch for a few years now. Yaourt nor Packer have ever really failed me to this extent. most EVERY package I try to install lately with yaourt or packer fails. I constantly get the below error. Even when I download the package, get the md5sum manually and place it into the proper spot in the pkgbuild I STILL get the error. Im extremely confused and need some help. Thanks in advance for any help you can give.
-> Downloading postfixadmin-2.3.5.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 29628 100 29628 0 0 39423 0 --:--:-- --:--:-- --:--:-- 39423
==> Validating source files with md5sums...
postfixadmin-2.3.5.tar.gz ... FAILED
==> ERROR: One or more files did not pass the validity check!
==> ERROR: Makepkg was unable to build postfixadmin.

stayupthetree wrote:If the md5sum of the package I download matches the md5sum of the one inside the pkgbuild should I still receive the error?
It shouldn't happen then.
Do you get the same error when you build a pacakge by hand with makepkg ?

Similar Messages

Scheduled refresh - Test connections settings validation failed: one or more connections did not pass the test

I copied a workbook that has a working scheduled refresh
modified the data model, added some new reports
added a new source (PQ from azure market place)
uploaded workbook to new powerbi location.
get the following error when i try to turn on scheduled refresh - this is even if i just select one data source that is still identical to the original (working) workbook
Test connections settings validation failed: one or more connections did not pass the test
Technical Details ▼
Correlation ID: ddcab6b8-ff2c-4881-9d8e-eeabbd23dff2
Date and Time: 12/12/2014 06:13:06 AM (UTC)
what's the problem?
Jakub @ Adelaide, Australia Blog

Still a problem and not just for me but other users going by the threads on here...
https://social.technet.microsoft.com/Forums/en-US/eb8682f4-9b40-456a-a7f1-45627a0f4ff0/cannot-schedule-refresh?forum=powerbiforoffice365#eb8682f4-9b40-456a-a7f1-45627a0f4ff0
Applies to all worksheets that utilise a PQ connection registered in the gateway. (my gateway is on an azure VM)
Existing worksheets receive this warning. New workbooks that utilise these connections also receive this warning
Adding a new PQ to the gateway and a new workbook that uses the new connection also receives this warning.
Every PQ connection I have receives this warning. My PQ connections are all to web resources. Most are to the workflowmax.com API, and one is to the Azure Marketplace to retrieve data for a date dimension.
Note: this does not prevent me from scheduling or triggering a refresh, and the refresh itself completes successfully. It's just a weird warning that caused confusion as it sounds like the actual refresh will fail as well seeing as the connection test failed.
Jakub @ Adelaide, Australia Blog

So i restarted my iPod and it is telling me that the activation server could not be reached! I don't know how to fix it. please help!

So i restarted my iPod and it is telling me that the activation server could not be reached. And I don't know how to fix it. Please help!!

Maybe this is applicable
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
This says the Activation Servers are on-line
http://www.apple.com/support/systemstatus/

Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it???????????

Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I bought an album and one of the songs did not download completely. It shows that the song is 3:17 seconds but only got 40 secs. of it. How can i get the rest of the song back?

I bought an album from itunes and one of the songs did not download completely. It shows in the player that it is 3:17 but only plays for 40 secs. How can i get the entire song back?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

WE have 2 Ipod classics and 1 IPod touch. One of the classics is not recognised by itunes library under devices and cannot be synchrinised with a playlist

We have 2 Ipod classics and 1 Ipod touch. One of the classics is not recognised by the itunes library and therfore canoot be synchonised with a playlist.

The second shuffle cannot be recognized by this computer ("USB Device Cannot be Recognized") so I don't think I'm able to reset it using that (it says "iPod is not recognized by iTunes, but is *visible in My Computer or in Device Manager* on a Windows PC, or in Apple System Profiler on a Mac.")
Like I said though, it works on other computers just fine and is visible so I don't quite understand what's up with this computer.
Message was edited by: theNoss
Message was edited by: theNoss

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

The delete key does a backward delete because it is the natural way to delete while typing. May not be to you and the millions of youngsters who grew up with windows computers. When you are typing and want to delete that which you just typed you are already at the end and you delete back to where you want to re-type. When you go back to a document and want to delete a selection, you have to go to the end of the selection instead of the beginning. it's just the way its always been done on macs. it takes some getting use to.
If you select text to be deleted with your mouse then the delete key deletes the selected text. same for either delete key method.
It is not convenient when you tab to fields in a form. That why fn-delete does a forward delete.
Macs have a couple of keyboards. The small "wireless keyboard" only has the (backward) delete (fn-delete forward). The larger "Apple Keyboard with Numeric Keypad" has both a Delete (backwards) key beside the = abd it has the "delete >" key in the groups with fn, home, end, Pg up and Pg dn. This keyboard is best for users who have switched from windows or are familiar with the windows forward delete.

One or more devices do not support multidevice tasks.

Hi,
I'm working with 2 USB X series DAQs (USB 6356). I am acquiring analog voltage data from all 8 channels on both DAQs (so 16 analog input channels total). I need the data acquisition to be synchronized and to trigger from an external digital source (a signal that I currently have wired into PFI0 of Dev A). I am using a sampling rate of 800 kHz, and a buffer size of 400 kS.
I have tried using one express vi for both devices; two separate express vis for each device; and recently changed to the DAQmx icons (as pictured in the attachment). Either way I get an error (error -201426: One or more devices do not support multidevice tasks.). It then references DevA and DevB as the devices that don't support the tasks. I was under the impression that multidevice tasks are okay with X series devices. I am using NI DAQmx 9.5.5.
In the attached picture, I have left out most of the while loop. The part of the diagram I left out is just for visualizing and saving the data, I have included the parts I felt necessary for describing my problem.
I would really appreciate any advice.
Thank you,
Leslie
Solved!
Go to Solution.
Attachments:
multidevice daq vi.PNG ‏24 KB

Thank you both, for shedding some light on my setup and this error. The information I was finding on the NI website did not seem to specify that USB Xseries devices were an exclusion to the statement made.
I have changed my program and built two separate tasks, which has eliminated the error 201426 message. I have attached a picture of my newest program. It is still not functioning, however no error messages are sent. for(imstuck), I'm not sure what you mean by "build an array of tasks" or read inside a for loop. We view the digitized signal from each channel (DevA ai0:7 and DevB ai0:7) separately anyway, so would concatenating the waveforms be necessary? When I run the program and "highlight execution" the program seems to get stuck on the DAQmx read tasks, no errors, it just doesn't proceed or send the waveform data. Am I missing something or is the for loop/concatenating the waveforms necessary?
Thanks again,
Leslie
Attachments:
separate tasks.PNG ‏41 KB

One or more Fonts are not available

I have seen this problem on this and other forums in the past
but I have never seen a response that made sense or lead to a fix:
I created a flash file a few months ago. It uses a font called
"microgramma". I now want to make some changes to it and I get this
message:
"One or more fonts used by this movie are not available."
etc...
The font is a truType font, works fine in every other
application on my machine, but now for some reason, Flash doesn't
see it. This is not the first time this has happened to me. It
would be great if Adobe would address this.
Flash CS3 on a MAC ppc with OSX 10.4.11

You should be able to get this to work. (btw - mac guy :) Is
the Font listed in the Flash 'Library' panel, or are you refering
to the main Font menu, and embedding? I'm uncertain, and perhaps
I'm mistaken.
You can create a Font 'file' the resides in the FLA Library.
Have you tried using the small icon in the upper right corner of
the 'Library' panel, and selecting 'new Font...'? this should
create a complete Font package?

I have paid my subscription for Adobe Acrobat Pro but can not install it- I always get an error message -also I did not receive any instalation code...

I have paid my subscription for Adobe Acrobat Pro but can not install it… I always get an error message …also I did not receive any instalation code...

With the subscription you sign in with your Adobe ID that you used to order the subscription. By installation code, I assume you mean serial number. You do not get one with the subscription, but use your Adobe ID.

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

Error: ORA-16796: one or more properties could not be imported from the dat

DGMGRL> CREATE CONFIGURATION prod as
PRIMARY DATABASE IS prod
CONNECT IDENTIFIER IS prod;Configuration "prod" created with primary database "prod"
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
DGMGRL> ADD DATABASE standby as
CONNECT IDENTIFIER IS standby
MAINTAINED AS PHYSICAL;Error: ORA-16796: one or more properties could not be imported from the database
Failed.
can any one help me out , i am not sure what could be the problem.
i checked the listner and tnsnames every thing looks good, if u want me to post any thing else plz do let me know
thanks
firdous

16796, 0000, "one or more properties could not be imported from the database"
// *Cause: The broker was unable to import property values for the database
//          being added to the broker configuration. This error indicates:
//          - The Oracle Net service name specified in DGMGRL CREATE
//            CONFIGURATION or ADD DATABASE command was not one that provides
//            access to the database being added.
//          - There were no instances running for the database being added.
// *Action: Remove the database from the configuration using the REMOVE
//          CONFIGURATION or REMOVE DATABASE command. Make sure that the
//          database to be added has at least one instance running and that the
//          Oracle Net service name provides access to the running instance.
//          Also check the broker log file for additional information.
//          Then, reissue the CREATE CONFIGURATION or ADD DATABASE command.

Error "One or more values could not be set" - Oracle Connector

Hey guys - I should have known there was a forum here with smart people. I'm hoping someone can shed a little light on our latest issue. When we try to invite people not within our company to a meeting, (even if they are included in our contact list/address book, etc) the error "one or more values could not be set" I'm pretty sure it's a forms error, but can't seem to resolve it. It started with the 2003 outlook service patch. I've applied every connector patch available and have searched for an answer, but can't resolve this icky problem (very crabby users) I've searched this forum but didn't see this topic. If it's already been addressed, forgive me and point me to the thread. If it hasn't and anyone has an idea, I'd appreciate some help!
Thanks
Kim

I have CRXI
First off, try verifing the database
Database,
Verifiy Database
Then if it is still broken.
Double-check all of the unlikely places in your report structure. Look at the subreport links. Look through all your formulas (including the ones for formatting). Keep in mind that Crystal doesn't have IntelliText, so you need to double-check (or even triple-check) that everything is spelled correctly.
Odds are strong that, somewhere in there, you are accidentally referencing a field that doesn't exist.

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?

When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@

Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work.

Unable to Download One or More Packages

Hello,
The following patches are giving me the "Unable to Download One or More Packages" error:
MS 2709630 Update for Windows 7 and Windows Server 2008 R2 (All Languages)
MS 2699779 Update for Windows 7 and Windows Server 2008 R2 (All Languages)
Oracle Java JRE 1.6.0_33 for Windows (Update) (All Languages) (See Notes) (Rev 2)
I've seen it mentioned that I should check the log files to determine the cause, but I'm fairly new to this and I'm not sure where they may be located. Can anyone give me the file path?
Thanks.
-Corey Hansen

coreyhansen,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Yaourt and packer always telling me "one or more packages did not pass

Similar Messages

Maybe you are looking for