Yard Management ( capacity of destination storage bin )

Hi Experts,
In sap yard management how to find capacity of destination storage bin , is there any field to check?
Regards
Anji

Hi,
Yard management (LE-YM) does not enter in the warehouse.
Therefore there is no destination storage bin relation.
On the other hand, there are capacity checks for trucks at location like door, staging area, parking spaces...
Best regards
Alain
Reward points if helpful

Similar Messages

Determine destination storage bin from PP-form

Hello,
From an adobe form (based on PSFC_KANBAN) I try in the print program to determine WM-data. To be specific I need the way from the supply area (or other pp-data) to the destination storage bin (Table PKHD).
It would be very kind of You, if you could give me a hint.
Kind regards,
Benjamin

Benjamin,
I am not sure but may be you can see the program RLLS4100 or TCODE LS41.
With this report, you can create cycle lists which are assigned to a storage type.
You receive a list with the following information:
Production supply area
Material
Plant
Warehouse number
Warehouse type
Production storage bin
Dynamic destination storage bin
Staging indicator for production supply
Try also TCODE OP42 and PK05.
The discussion below might help you:
http://scn.sap.com/thread/3172596
Regards,
Ashvin

Same Storage Unit number for both source & destination storage bin

Hi, I have a requirement to have same Storage Unit number for both source & destination storage bin in transfer order screen.. can any1 suggest how to do it?
An early response is very much appreaciated

Hello,
You absolutely right.
I've made necessary cust. settings berofe posting goods receipt with storage units:
Customizing storage units number ranges:
And storage units customizing:
And also in Material Master:
But i don't see the storage unit type number in storage bin:

Error - No destination storage bin to be found in storage type

Hi all,
this is my flow -
Create STO PO - ME21n
create deliveries via - BAPI_OUTB_DELIVERY_CREATE_STO
create Transfer order(TO) - L_TO_CREATE_DN - for o/b delivery
confirm TO- L_TO_CONFIRM
Using BDC i am doing PGI for VL02n
create Transfer order(TO) - L_TO_CREATE_DN - for i/b delivery
confirm TO- L_TO_CONFIRM
Create GR - 'BAPI_GOODSMVT_CREATE'
Here till PGI my report pgm is working fine. and when cominf to TO create based on i/b delivery i am getting error -
No destination storage bin to be found in storage type 104
I have added 2 lines in the FM at exception part -
error_message = 16
OTHERS = 32.
So my return code for the FM - L_TO_CREATE_DN (_FOR i/b delivery)_is 16
message class : L3
message number : 009
message type : E
No destination storage bin to be found in storage type 104
Can any one tell me how can be this rectified - Is this a config related issue or data problem ?
Pls help me.
Sen

Hi all,
Thanks for your replies.
Manish: Where do I see that the storage bin is created with respect to storage type? I was checking LS03N where I can see that the storage bin is created for storage section and storage bin type. Configuraiton is like below:
Storage Bin search Strategy:
(1) By storage section: Not active
(2) By Stotage Bin type - Active and the storage bin type is assigned to a storage type.
I have one storage bin available (Bulk Storage) for the selected storage Bin type BUT it is not automatically searched by the process. Material master has WM view1 with storage type indicator and there is a config for storage type search which is working good. The only issue is searching storage bin while creating TO during Goods movement, in particular Put away. Also please note that the storage bin is not hardcodes in material master).
This error happens for all the scenarios (unrestricted, blokced or when WM stock is initial or when the materrial is created first time and subject the WM movements).
When I first started this question I thought that the error happens only for Blocked status. Actually it is happening for all the scenatios when the WM stock in initial.
Hope my scenarios are clear. Thanks in advance for your help again.
Best regards
Nagarajan

Proposal of same destination storage bin as source storage bin

I am using the function module: 'L_TO_PREPARE_ITEM_INT' for finding out the destination bin. But I am getting the same storage bin of source bin for destination bin proposed thru this FM. It doesn't make any sense. How can I avoid proposal of same storage bin. Is there anything to do in configuration or any userexits can be used to avoid this problem.

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Manage stock qty. in Storage bin for Inventory management

HI all,
We are implemented Inventory Management (display stock of material for storage location).
I want to know is there any method in Inventory Managment to Manage stock of specific material in bin also.
Means User exactly should know the stock of specific material is located in Storage Bin.
Please suggest me the hole process or any customization
Regards,
Vraj

Hi V raj,
I don't know whether i understood your question well. But i will answer in the way i understood.
To serve your requirement you need to have a Warehouse management, means to have a smooth warehouse bin wise storage.
But some companies are not willing to implement WM and they are finding a way with batch classification. They maintain batches for material and storage bin are maintain in a batch classification. So you can view it in MMBE also by going into the batch classification of the relevant batch.
And if you want to have a detail report you can develop a simple report or a query to retrieve batch classification data.
For batch classification activation:
1. Material must maintain "Batch management" tick in Purchasing and storage plant data views
2. Create a seperate class for this using CL02
3 Create batch characteristic using CT04 (this is to maintain Storage Bin)
4. Add classification view to each material and the relevant batch class.
5. When you are doing the GR use "Batch" tab and "Classification" button to maintain relevant Storage bin data. (To update mass scale you can create a "Z" report getting help of a developer in your company)
6. Now each batch you are maintained your storage bin view it trough MMBE (But only one batch classification) or in-house developed report ("Z") program
Thanks & BR
sandun

Capacity control in storage bin for material

Hello,
I am trying to set up following scenario: I want to set the capacity of storge bin for material for example 16547. For one storage bin fit only 200 pieces of material 16547. So I set this in material master WM2 tab. Then I order 400 pieces, TR is generated, then I want to create TO in background, but it display error: Maximum quantity for storage bin will be exceeded. Then I have to create TO in foreground and confirmation 2 times.
So my question is: is there any way to set up that TO will be created in background and confirmed one time?
Thank you

a TO split will not be triggered by remaining capacity, never.
The TO split has to happen earlier, SAP is always trying to putaway the entire quantity of a single TO item into one bin. Hence you need to have many TO items.
This is controlled by Palletization (WM2 view).
If you get 200 on one pallet, the enter 200 in WM2 view and SAP will give you 2 TO items if you receive 400.

Destination storage bin determination issue

Hi Experts,
When we deconsolidate the ASN, some of the products getting into correct destination bin and some products are not getting into correct destination bin, getting into one inbound over flow storage type defined. When i looked at product master, strategies and storage types configuration the difference i see between actual storage types and overflow storage type is:
1. HU requirement option. i.e. for actual storage types - HU requirement not allowed and for Overflow storage type - HU requirement allowed but not requirement.
2. For actual storage type ---- Mixed storage selected as "several HUs with different Batches of the same product" for putaway rule: Addition to existing stock/empty bin and for Overflow storage type - Mixed storage without limitations
Can you please help me if anything is wrong with above selection at storage type level?
Thank you...
Sridahr
Message was edited by: SRIDHAR B

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Destination storage bin problem

Dear SAP GURUS
i am facing a problem the scenario goes like this.
I have created the sales order, and delivery and then done the picking using the delivery order's subsequent document by creating the transfer order and then confirmed the transfer order by lt12 the status is also coming as picking C and the WMSTATUS C now when i am trying to do the postgoods issue it is giving me the problem of
" warehouse XXX 916 not found"?
i have not done the putaway stratergy. can anybody help me with the problem please.
why is that so is it because that i have not done the PUTAWAY stratergy or is it something else.
please help me with this regards.
thanks and regards

Dear Yogesh,
Check these settings in the IMG
IMG->Enterprise structure>Definition->Logistics execution>Define, copy, delete, check warehouse number
IMG->Enterprise structure>Assignment->Logistics execution>Assign warehouse number to plant/storage location.
Make sure that you done the proper settings for ware house management
IMG>Logistics execution>Ware house management
I hope this will help you,
Regards,
Murali.

Storage bin Capacity utilization is greater than 100%

Hi,
Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
Kindly please advise.
Thanks

For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

Create the stock in storage bin level

Hai all
     while i am doing transfer of order it is asking that storage unit type and the material stock is not maintained in storage bin .
can anybody tell me how to maintain the stock in bin level .please help me is there any tcode for that
regards
satish

Dear Satish
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
         --> Maximum weight
         --> Total capacity
         --> Fire containment section
         --> Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
<i><b>For information on how to define storage bins, call up the Implementation Guide (IMG) for Warehouse Management and see under Master Data --> Storage Bins .</b></i>
Generally speaking, you can use any combination of letters and numbers for a storage bin coordinate with the exception of certain alphanumeric characters that are used for stock placement strategy P (according to pallet or storage unit type).
When goods are placed into storage, the system selects coordinates in ascending order according to specific sort criteria, and assigns the next available storage bin based on the coordinate structure you define for creating bins.
Thanks
G. Lakshmipathi

Print of Storage Bin details in GR slip

We have done goods receipt (GR) in a Storage location with is Warehouse managed.
We have setting where the Transfer order is created and confirmed automatically as soon as GR is posted.
We print the GR slip and we need the Storage bin to be printed for every line item. We need the destination Storage bin detail from the Transfer order created.
Now is it possible to have this scenario?
Which program is called first? Printing of GR or Creation of Transfer order?
Please help me with the logic to get the Storage bin information in the Goods receipt slip.

done

Addition to stock in storage bin

Hi,
in the customizing LE-WM-Master data-Define Storage Type I have defined for storage type 500 that addition to stock is not allowed, so all the bins created in this storage type are not going to allow addition to stock even though in materials master this indicator is marked?
MY requirement is to not allow addition to stock to the bins if some material is placed in that bin even if there is available capacity, but this is true for 99% of the bins, meaning I need for 5 bins in particular, system allow addition to stock because I want to place in there 10 different materials that are really small compared to all other materials.
How can I achieve this?
Regards

Hi Jürgen
When thinking of this setting you told me everything will work perfec if it worked, but even if I put in the customizing of storage type Addition to stock "M" and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4), and the last storage section is linked only to one bin.
The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
Please your inputs will be really appreciated

Issue :Storage bin is not trigger in TO

HI
I have totally two storage bin, i did PO- GRN, iam trying to do trasfer order . but system is not trigger storage bin during the
transfer order
1) how many storage bin required for creating transfer order.
2) iam trying to manage stock in one storage bin ,is it possible ?
with regards
dinesh

Hi,
yes, you can use one storage bin till u don't have mention capacity of bin.
WM bin search strategy
Storage Bin Search Strategy is failing
http://help.sap.com/saphelp_470/helpdata/en/c6/f83fe54afa11d182b90000e829fbfe/content.htm
Kuber

Storage unit types and storage bin types - Need

Hi,
i want to know what is the use of the storage unit type and storage bin type.
thanks,
Maxx

Dear Maxx,
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
Storage Bin:
A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
You can also define the following additional characteristics of a storage bin:
Maximum weight
Total capacity
Fire containment section
Storage bin type (for example, for small or large pallets)
With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
Storage Unit:
In the system, a storage unit record consists of a header and at least one material data record (quant data record).
The header contains information which is relevant for the entire storage unit and includes the:
Storage unit number
Storage unit type (SUT) of the storage unit
Storage bin in which the storage unit is currently located
Status, which provides current information about the storage unit
Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
Hope this will help.
Regards,
Naveen.

Yard Management ( capacity of destination storage bin )

Similar Messages

Maybe you are looking for