Yay Finally got an update for Voda N80 RM-92

I'm not sure how long the update has been around but just did it tonight. I kind of gave up checking as it was pointless. Let's see if this version works eh!
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

Well I have to turn my phone off and on again to get it to connect to the headset. Once it connects it's ok but still the phone connects calls but you can't hear through the headset. Might work with a gps module thingy though. Try turning it off each time to connect though
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

Similar Messages

  • I got an update for a game i play and i updated it and now every time i try to play it it won't come up.

    i got an update for a game i play frequently so i updated like it said now i cannot get the game to play. everytime i touch it, it acts like it is coming up and then it doesn't

    1. Double-click the Home button to reveal Task Bar at bottom
    2. Hold the game app down for a second or two until you see the minus sign
    3. Tap the minus sign to close app
    4. Re-launch the app and test
    Note: If necessary close all apps in the Task Bar

  • Finally got the update, But

    Hello All,
    After 10 days, I finally got the update @ 9:30 this morning. Its going take a few days to see what got fixed and what got broken.
    After the update I have a bunch of contacts that I can't remove. I looks like they are on the sim card. I could remove them when I got the phone. Its
     #BAL
    #DATA
    #MIN
    #PMT
    Global Support Team
    Warranty Center

    When you reboot the phone, they should go away.
    You can also open the people application, press menu and then view. Uncheck the SIM card contacts. It will actually say that there are zero contacts, but I unchecked it anyway.

  • HT203167 I finally got the update of IPHOTO 11 to download, now when I try to open my IPhoto it says it needs to be prepared to work, so I install that and it says it is downloaded, but when I try to open my Iphoto it just keeps repeating that it needs to

    The above question is too big to read, so this is what it says>>>>I finally got the new IPhoto 11 to download after problems with the installation; now when I open it, a message pops up that says to continue I need to prepare the old version for the new....so I downloaded the preparation download and it says it is installed, but when I go back to open IPhoto again after this installation, the same message keeps popping up! I cannot find any of my pictures either. What is going wrong and how can I continue with IPhoto and update and get my pictures again? This all has happened because I made a big book of my travels and when I went to purchase it it said I could no longer buy books using the old IPhoto 7.........so I updated everthing and bought the new version and did everything it said, but still not working:::HELP!

    You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
    LN

  • Finally got itunes updated (after fixing the 2330 error) now my ipad is not showing in itunes...help!

    I had registry issues which were not allowing itunes to update.  Finally got that fixed and now have the most current version of itunes on my PC.  Now a new issue...itunes is not recognizing that the ipad is pulled into the PC.  Help!

    Hi there,
    I have found and linked to a support page which should help you. Take a look.
    iPad Assistant - iTunes
    Regards,
    Nathan

  • HT1430 i got an update for the iso6 downloaded it and now i cannot link to the net

    i got an update prompt today for iso6 i downloded it and now i cannot get on the internet. i have reset or renewed lease, restarted ipad and still when i try to link to the net it just roams round and round and nothing is getting on the net.
    love the ipad, new to it but finding my way around not too badly or so i thought
    any help would be appreciated
    thanks

    Are you referring to the Settings > WiFi screen? Sorry, I'm not sure I understand what you're trying to say, but tapping the blue arrow will not connect to the network. It will just show some information about the network. To join the network, you have to tap on the network name, to the left of the blue arrow. It should then ask for your network password.

  • I got  software update for ios 6 on my iphone 5 and now my phone is broken

    The update was for ios 6.0.2. I got this phone two days ago and now it's stuck on a black screen with the apple icon. I can turn it off but when I turn it on it just freeezes ther again. Please help.

    Hold down both the power button and the menu button for at least 60 seconds. Don't worry about what the phone is doing, it's sounds like the update has bricked the phone. Thankfully, because you were updating using an official Apple update this isn't permanent.
    Once you have held the buttons down for 60 seconds make sure you've installed the latest version of iTunes. Restart your computer and wait until it is loaded, open iTunes and plug in your device using the Apple USB Lightning Cable, Select your device and choose restore.
    When restoring, don't choose from a backup (You can do this later, we just need to get your device back to the state it was in when it left the factory i.e. working!)
    Let the restore run. Note: when restoring from a bricked state it usually takes three times longer to restore than when doing a normal restore so let it just get on with it (Shouldn't take any longer than 3 hours)
    When this is done, set up your device again and log in using your iCloud account.
    Once done, check the phone is working. If it isn't there is a hardware fault which maybe resolvable by the Apple Genius Bar so make an appointment. If they can't get it working they will replace it there and then, provided your device is registered to your Apple ID.

  • When i plugged in my phone to my iTunes after i got the update for ios 7 everything from my icloud got on my phone so i plugged it into my itunes to try and take everything off but its saying i need the latest version of itunes how do i do that ?

    rigght after i got the ios 7 update i noticed everything from my icloud was on my phone i dont want all that stuff on here so i plugged it into my computer and its saying that i need the latest version of itunes i have downloaded it twice and i am still getting the same error message. So my question is how am i supposed to download the latest version of itunes if its not working. it says for a Windows computer the update is 11.0.5 but i need 11.1 what am i supposed to do ?

    you dont need computer. go to settings > icloud and turn off what you dont want like photostream/calendars/contacts. for itunes 11.1 you need to go to itunes.com and download it then install it.

  • Final Cut Pro update for

    I have final cut pro on my mac 10.7 needs to update with the serial number. Where do i do that? The final cut pro I have is old and says it cannot work on this computer. 

    The serial number for FCS came affixed to the booklet titled "Installing Your Software" that came bundled with the install discs.
    FWIW, upgrades for FCP are no longer available form Apple as they have discontinued the product.  You can purchase FCP-X (version 10), which is actually version 1 of completely different software.  FCP-X is available for download from the App Store for $299.00 (USD).
    -DH

  • Can anyone tell if there is an update for my N80

    Since I own a Mac, I dont know if my N80 variant has an update yet, here is the info:
    V 3.0617.0.6
    03-05-2006
    RM-92
    NOKIA N80 (46.02)
    I am pretty shure this phone is from Hong Kong

    14-Nov-2006
    12:26 AM
    slonar wrote:
    I know that most N80 have a software update, and I know that I will have to use a PC, but last I checked (one week ago) the V4 for the 46.02 variant was not available, are you guys certain it is now?
    Yes, I have the latest firmware installed on my N80. V 4.0623.0.42 is my version. I updatet it with the Nokia Software updater on my PC, and after that I tried a update over the air ( FOTA ).

  • IMovie won't open since i got the update for Yosemite

    ever since i updated the mac book pro to Yosemite - it has been slower and also iMovie won't open at all

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    You can also try running the combo update.
    10.9.2

  • App store got a updates for me, but its not my Apple ID

    I bought a second hand MacBook Pro from a colleague of mine at work, he erased all the things he wanted to save to himself and I deleted is user name and created my own user name and became the new Admin. ive updated to the new operating system "Yosemite" and everything works great so far. I received an alert on the app store that an updaet is waiting for me, but for some reason the app store wants the password Username previous admin Even I deleted it from the computer users, another strange thing is that I connected with my user name and my password to the app store so how can it be that he asks for username and password that does not exist on this computer ?

    Preparing a 2nd Hand Mac for use -
    You need to erase the HDD, reinstall the version of OS X that shipped from the factory on the Mac and then set it up as new with your own Apple ID.
    User Linc Davis explains how a new owner can prepare a 2nd hand Mac for their own use.
    https://discussions.apple.com/message/25468326

  • Just got an update for my iMac and now my internet locks up

    Just got a software update and now my internet locks up

    Reset the Router and Modem and if your router needs it please update it's firmware.

  • HT201210 i foolishly decided to finally download an update for my iphone 4 and now after hours of downloading then restoring and then downloading some more  I have a phone that continually says Connect to itunes and when i do the whole process starts over

    help me i now have no phone apple are hiding

    Hi fergie_fox!
    I have an article for you that should be able to help you troubleshoot this issue:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • HT1338 I just bought a brand new mac mini, and finally got it authorized for itunes.  I purchased some tv programs and now it is telling me I canʻt play them because my monitor doesnʻt support HDCP... I am using a 30inch mac monitor...

    Any ideas how to get this working?  I donʻt have money to go buy a new monitor...

    Unfortunately HDCP is a technical requirement for the playback of some movie formats, for example Blu-ray.  If your monitor does offer this, make sure your cabling and connection type also supports it.  If your monitor doesn't offer this, I'm afraid you may have to consider buying a new or additional monitor.  Any other suggestions I could make are not permitted on this forum, I'm afraid.
    I have this problem too.  I have a 2005/2006 Apple Cinema Display that's still in perfect working order, but doesn't have support HDCP.  I had to find an alternative way of playing back my blu-rays.

Maybe you are looking for

  • Gapless playback on the Windows 8 phones

    In 2006 my iPod was able to properly play gapless albums. My iPhone was able to play gapless albums. My partner was able to download a gapless player onto their Android. Why doesn't Windows Phone play gapless albums properly? Is it too difficult to w

  • Receiving channels 225 et al

    Not sure if this question is related to the massive Multicast thread earlier (much of which is all g(r)eek to me, I'm afraid) but I'm surprised that I still can't receive the channels 225 and upwards. I still get a message saying that I do not have a

  • Ruler guides are not exact, Can you Help?

    I'm dealing with a Block of text and the Frame is set to leading and the text is 10 pt and 11 pt leading. If i Drop a ruler guide on the baseline of the text I can put the continuation of the column in the next column and just line the top of the 2nd

  • Co code copy problem

    Hi, I copied 0001 co code to 555, i also copied INT chart of a/cs, now while changing the chart of a/c from INT to 111, it is showing error message "RESET COMPANY CODE DATA BEFORE CHANGING THE CHART OF A/CS" But after copy, i just changing the chart

  • Merge Data by Form

    I wish to send a created form to client automatically instead of send manually. Say, I want client to download a form at my website, complete and return the form to me automatically through e-mail. When I gathered the forms, I can transform the form