Year and month wise results

dear sir,
i want to get data through find button.
while i pass the perticuler date.
data should come up inthe grid .
how to use with find button and date how to get the data? pl help,
thanks
pullareddy

to get the Month Value and year value in Webi
month name
=Month(ToDate(UserResponse("Enter End Date:");""))
month number of the year
=MonthNumberOfYear(ToDate(UserResponse("Enter End Date:");""))
to get the Year Value
=Year(ToDate(UserResponse("Enter End Date:");""))
good luck

Similar Messages

Key Figure format in Years and Months..

Hi,
Is there any Key figure similar to 0SRVCLENKYF (Length of Service (in Years)) part of Headcount and Personnel Actions, which should give me value in Years and Months..?
Thanks in Advance,
Thanks,
Madhu.

For curiousity sake...if you use the FIMA_DECIMAL_MONTHS_AND_YEARS Function Module, the output that you'll get is a months and years in fractional amounts. So, how are you going to get the Years and Months from this?
For example, if the from date is 20000101 and the to date is 20090914, the results from this Function Module will be Months = 116.42740 and Years = 9.70228. If you do use this, I'd suggest taking the whole number from passed value for years (9 in this example) and then calculate months by taking the franctional amount of the passed value for years and multiple it by 12 (0.70228 * 12), you end up with 9 Years, 8 Months (8.42736 to be exact, but you're going to want to truncate it to 8 so that when it goes above 8.5, the value doesn't become 9 when it still should be 8).

Year and Month calculation

Hi
I have created a report with two prompts, they are "Enter Start date:" and "Enter End date:" where i take date values from a calendar while prompting.
For example:
Start date = 10/11/2003
End date = 10/10/2003
If i want to display the End date means, i ll use UserResponse("Enter End Date:") in the webi reports. What should i do to calculate Year and Month from this user response value,
i used these calculations below, but it is not working, showing me #ERROR message.
1) ToDate(UserResponse("Enter End Date:");"dd/MM/yyyy")     = #ERROR
2) FormatDate(ToDate(UserResponse("Enter End Date:");"dd/MM/yyyy");"dd/MM/yyyy")     = #ERROR
3) Year(UserResponse("Enter End Date:")   = The expression or sub-expression at position 6 in the 'Year' function uses an    invalid data type. (WIS 10037)
4) FormatDate(ToDate(UserResponse("Enter End Date:");"dd/MM/yyyy hh:mm:ss A");"MM/dd/yyyy") =#ERROR
so help me how to get the year and month values from prompts ?
Thanks
Dineshkumar

to get the Month Value and year value in Webi
month name
=Month(ToDate(UserResponse("Enter End Date:");""))
month number of the year
=MonthNumberOfYear(ToDate(UserResponse("Enter End Date:");""))
to get the Year Value
=Year(ToDate(UserResponse("Enter End Date:");""))
good luck

How to add a new metadata field to iPhoto where new field is calculated as age in years and month based on a specific date and the date photo was taken ? I want to calculate and display the age of my two kids on every photo.

Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regards

It can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT

Alpha numeric numer ranges for Shopping Cart based on year and month

Dear All,
My client requirement is that Shopping cart number should be generated based on year and month specific.
Though it is possible through smart numbering, it should generate automaticaly.
For eg:- Shopping cart generated for March 2011 should be 1103SC00001 to 1103SC99999
Shopping cart generated for June 2011 should be 1106SC00001 to 1106SC99999
Shopping cart generated for January 2012 should be 1201SC00001 to 1201SC99999
Is thera any badi available for this.
Regards,
Raju

why dont you add this to description field?

What is the best way to dynamically create table partition by year and month based on a date column?

Hi,
I have a huge table and it will keep growing. I have a date column in this table and thought of partition the table by year and month. Can any you suggest better approach so that partition will create automatically for new data also along with the existing
data? Nothing but automatically/dynamically partition should create along with file group and partition files.
Thanks in advance!
Palash

Also this one
http://weblogs.sqlteam.com/dang/archive/2008/08/30/Sliding-Window-Table-Partitioning.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Album By Year -- and month? (Sorting when an artist has 2 albums in 1 year)

I love having my music collection sorted by Artist and within Artist by Album by Year. This effectively presents each artists' entire catalogue as a set, with each album in the order of release date. Perfect.
But what if an artist releases more than one album or single in a year?
Then the sorting of Album by Year breaks down.
Two albums in the same year appear to iTunes to have been released at exactly the same time. iTunes gives up, looks at the two albums' titles, and sorts them in alphabetical order. That's kind of lame.
Is there some way to specify the year AND MONTH of release?
I tried adding a decimal to the year field, figuring that would at least be close enough to get them in chronological order, but it won't accept more than 4 digits.
The obvious workaround is to rename the albums, for example rename the second album with a "Z" so it will be forced into second place when iTunes gives up and goes alphabetical. Or, use entirely fake years. But neither workaround is proper.
Is there any legitimate way to tell iTunes what to do?
Gateway NX250X Windows XP Pro

Hi, Will.
But neither workaround is proper.
Indeed.
Is there any legitimate way to tell iTunes what to do?
Unfortunately, as far as I know there is not so your workarounds seem like the best way of dealing with the situation - it's either that or eliminating artists who release more than one record in any given year from your Library. ; - )
All I can suggest is you go to the man and let him know what you'd like to see in a future version of iTunes: http://www.apple.com/feedback/itunesapp.html

Extract Data Based on Year and Month

My clients have taken an Oracle DB TimeStamp field and
downloaded it to Access in a TEXT field format.
Sample data: 20060401001348CS
All I am trying to do is extract data based on year and
month. I have equal to 200604*, 200604%. Have also tried to used
LIKE.
Nothing works. It just can't be that dificult. Please help.
Thanks

After breaking my inquiry down into bits and pieces the
problem is not just the LIKE, it is a combination of events. The
entire picture is this:
User selects Year from a drop down (2006), then selects month
from drop down (04). I then build a variable called
EventReport Date with the statement <cfset EventReportDate
= Session.InquiryYear & Session.InquiryMonth & "%">
It correctly displays as 200604% - When used by itself as
below, it works just fine.
WORKS
<cquery name="GetEventCount" datasource="CountyDB">
Select count(AD_ID) as EventCount, TYCOD, TYP_ENG, CURENT,
CDTS
FROM aeven
WHERE CDTS LIKE '#EventReportDate#'
Group By AG_ID, TYCOD, TYP_ENG, CURENT, CDTS
</cfquery>
WORKS (additional WHERE criteria)
<cquery name="GetEventCount" datasource="CountyDB">
Select count(AD_ID) as EventCount, TYCOD, TYP_ENG, CURENT,
CDTS
FROM aeven
WHERE ((AG_ID = '#Session.InquiryAgencyCode#') AND (CURENT =
'T'))
Group By AG_ID, TYCOD, TYP_ENG, CURENT, CDTS
</cfquery>
FAILS **** There is something wrong with the combination of
the WHERE clause items
<cquery name="GetEventCount" datasource="CountyDB">
Select count(AD_ID) as EventCount, TYCOD, TYP_ENG, CURENT,
CDTS
FROM aeven
WHERE ((AG_ID = '#Session.InquiryAgencyCode#') AND (CURENT =
'T')
AND (CDTS LIKE '#EventReportDate#'))
Group By AG_ID, TYCOD, TYP_ENG, CURENT, CDTS
</cfquery>
NOTE: There is not an error message, it just comes back with
zero records.
MORE LOST THAN EVER! Thanks for your help
Ron

How to Get the numeric equivalent of Year and Month with this format....

Hi Experts!
I just would like to know how to get the numeric equivalent of the Year and Month if the given format is like this....
31-May-07
where:
31 is the Day
May is the Month
07 is the Year
Is there a function in ABAP to do this? I wouldn't mind hardcoding for the Month, but what I'm after is the year.... they only gave me 2 digits for the year... and I would like to extract 4 digits from it... do ABAP still recognize it as '1907'? I think not...
Please help me on this experts and Thank you in Advance!!!
More Power!

Hi Jayson,
You can require 2007 or 2017 or 2027..
or 1937 . or 1947 .. so on,
so just put a logic based on this. Just hard code as
lets say value is 31-May-07 (9 char field)
Case field+7(1).
WHEn 0.
concatenate '200' field+8(1) into year.
WHEN 1.
WHEN 2.
WHEN 3.
jsut code like this and check the syntaxes.
Reward points if useful.
Regards,
Atish

Customer and month wise sales

Dear All
Which Table Stored Customer and month wise sales values?
Thanks and Regards
Suresh

Hi
Table VBRK Will help you.
Assign points if you find the solution with this
Regards

Display total dmbtr according to mat type and month wise

hi all,
i want to display total dmbtr according to mat type and month wise. like
month       mat.type total_dmbtr
jan 2008   fert           xxxxxxxxxx
jan 2008   mcfe         yyyyyyyy
feb 2008 fert mmmmm

this is my prog..but am gettin o/p for one month irrespective of material type..
tables : mseg, mkpf, mara, S031.
********************DECLARATION******************************************
types : begin of ty_mkpf,
        budat type budat,
        mblnr type mblnr,
        end of ty_mkpf.
TYPES : BEGIN OF TY_S031,
        WERKS TYPE werks_d,
        SPMON TYPE SPMON,
        matnr TYPE matnr,
        END OF TY_S031.
types : begin of ty_mseg,
        mblnr type mblnr,
        matnr type matnr,
        werks type werks_d,
        menge type menge_d,
        dmbtr type dmbtr,
        bwart type bwart,
        end of ty_mseg.
types : begin of ty_mara,
        matnr type matnr,
        mtart type mtart,
        end of ty_mara.
data : it_mkpf type ty_mkpf occurs 0 with header line,
       it_mseg type ty_mseg occurs 0 with header line,
       it_mara type ty_mara occurs 0 with header line,
       IT_S031 TYPE TY_S031 OCCURS 0 WITH HEADER LINE.
      it_final TYPE ty_final OCCURS 0 WITH HEADER LINE.
data : flag type dmbtr,
       flag1 type dmbtr ,
       flag3 type dmbtr ,
       flag4 type dmbtr,
       flag5 type dmbtr,
       flag6 type dmbtr,
       flag7 type dmbtr,
       f1 type i VALUE 0,
       num_of_loops TYPE i VALUE 0,
       flag2 TYPE spmon.
**********************************INITIALIZATION***************************
flag = 0.
flag1 = 0.
flag3 = 0.
flag4 = 0.
flag5 = 0.
flag6 = 0.
flag7 = 0.
******************selection screen*****************************************
selection-screen begin of block b1 with frame title txt_001.
select-options : plant for S031-werks,
                 month for S031-SPMON.
                date for mkpf-budat. "+4(2).
                MONTH FOR MONTH_NAMES_GET.
selection-screen end of block b1.
flag2 = month-low.
f1 = month-high - month-low.
if month-high is initial.
num_of_loops = 1.
else.
num_of_loops = f1 + 1.
endif.
start-of-selection.
perform getdata1.
*&      Form get_data
      text
form getdata1.
if month-high is INITIAL.
write : / 'for month ' COLOR COL_GROUP, flag2 COLOR COL_GROUP.
Select WERKS SpMON matnr from S031 into corresponding fields of table it_S031
where SpMON = flag2 AND WERKS IN PLANT.
   loop at IT_S031.
     at first.
        write : /5 'mat_num', 20 'month', 40 'QTY',58'amt',68'movement_type', 85'mat_type'. ",105 'qty remaining'.
        skip.
     endat.
select single mblnr werks matnr menge dmbtr bwart from mseg into corresponding fields of it_mseg
    where werks = IT_S031-werks and ( bwart = '102' or bwart = '101' or bwart = '601' or bwart = '602' )
      and matnr = it_s031-matnr.
    if it_mseg-bwart = '101'.
      flag = flag + it_mseg-dmbtr.
    elseif it_mseg-bwart = '102'.
      flag1 = flag1 + it_mseg-dmbtr.
    elseif it_mseg-bwart = '601' .
      flag4 = flag4 + it_mseg-dmbtr.
    elseif it_mseg-bwart = '602' .
      flag5 = flag5 + it_mseg-dmbtr.
    endif.
    flag3 = flag - flag1. "101-102
    flag6 = flag4 - flag5. "601-602
    select SINGLE matnr mtart from mara into corresponding fields of it_mara
      where matnr = it_mseg-matnr. " and mtart = 'FERT' .
   loop at it_mara.
      write : / it_mara-matnr,20 IT_S031-SPMON, it_mseg-menge, it_mseg-dmbtr, 70 it_mseg-bwart, 88 it_mara-mtart.
      skip.
    endloop.
endloop.
skip 1.
write : / 'TOTAL QTY RECVD (a = 101-102)      ' , flag3.
write : / 'TOTAL QTY CONSUMED ( b = 601-602) ' , flag6.
flag7 = flag3 - flag6.
write : / 'QTY REMAINING (a-b)                ' , flag7.
skip 2.
flag = 0.
flag3 = 0.
flag4 = 0.
flag5 = 0.
flag6 = 0.
flag7 = 0.
flag2 = flag2 + 1.
endif.
do num_of_loops times.
if not flag2 gt month-high.
    write : / 'for month ' COLOR COL_GROUP, flag2 COLOR COL_GROUP.
Select WERKS SpMON matnr from S031 into corresponding fields of table it_S031
where SpMON = flag2 AND WERKS IN PLANT.
   loop at IT_S031.
     at first.
        write : /5 'mat_num', 20 'month', 40 'QTY',58'amt',68'movement_type', 85'mat_type'. ",105 'qty remaining'.
        skip.
     endat.
select single mblnr werks matnr menge dmbtr bwart from mseg into corresponding fields of it_mseg
    where werks = IT_S031-werks and ( bwart = '102' or bwart = '101' or bwart = '601' or bwart = '602' )
      and matnr = it_s031-matnr.
    if it_mseg-bwart = '101'.
      flag = flag + it_mseg-dmbtr.
    elseif it_mseg-bwart = '102'.
      flag1 = flag1 + it_mseg-dmbtr.
    elseif it_mseg-bwart = '601' .
      flag4 = flag4 + it_mseg-dmbtr.
    elseif it_mseg-bwart = '602' .
      flag5 = flag5 + it_mseg-dmbtr.
    endif.
    flag3 = flag - flag1. "101-102
    flag6 = flag4 - flag5. "601-602
    select matnr mtart from mara into corresponding fields of table it_mara
      where matnr = it_mseg-matnr. " and mtart = 'FERT' .
    loop at it_mara.
      write : / it_mara-matnr,20 IT_S031-SPMON, it_mseg-menge, it_mseg-dmbtr, 70 it_mseg-bwart, 88 it_mara-mtart.
      skip.
    endloop.
endloop.
skip 1.
write : / 'total recd qty (a = 101-102)       ' , flag3.
write : / 'total Qty consumed ( b = 601-602) ' , flag6.
flag7 = flag3 - flag6.
write : / 'Qty remaining (a-b)                ' , flag7.
skip 2.
flag = 0. flag3 = 0. flag4 = 0. flag5 = 0. flag6 = 0. flag7 = 0.
flag2 = flag2 + 1.
endif.
enddo.
endform.                                                    "getdata1

T:inputCalendar year and month only

Hej there,
I'd like to use t:inputCalendar to allow the user only to choose a certain year and month, so not including the day.
I'm not sure if it's possible at all, but I started out using this:
<t:inputCalendar renderAsPopup="true" popupSelectMode="month" popupDateFormat="MM" />
So now the user has a button, but when s/he clicks on it, the full calendar is shown, including the days.
How do I get rid of that?
Thanks,
David

When you are not really using date, you might as well think of a different solution altogether.
Probably you can have two separate drop-down lists for selecting the month and the year.
DavidTarr wrote:
Hej there,
I'd like to use t:inputCalendar to allow the user only to choose a certain year and month, so not including the day.
I'm not sure if it's possible at all, but I started out using this:It is possible to convert the pattern using convertDateTime. But this only converts the text field display.
<f:convertDateTime type="date" pattern="MM-yy"/>
<t:inputCalendar renderAsPopup="true" popupSelectMode="month" popupDateFormat="MM" />
So now the user has a button, but when s/he clicks on it, the full calendar is shown, including the days.
How do I get rid of that?I am not sure if you can get rid of that. Obviously, no body would expect to see a calendar without dates. It does not make much sense.
>
Thanks,
David

FM takes year and month as input and give firstdate and lastdate as output

Hi,
Can any one tell me any <b>function modules which takes year and month as inputs and gives first date and last date of that month as outp</b>uts.
Regards,
Gurprit Bhatia
Message was edited by:
        GURPRIT BHATIA

Hi Gurprit,
You can use this.
data : ws_date type sy-datum.,
         ws_edtae type sy-datum.
constants : c_01 value '01'.
CONCATENATE ws_date c_01 INTO ws_stdate.
CALL FUNCTION 'HR_JP_ADD_MONTH_TO_DATE'
      EXPORTING
        iv_monthcount = ws_01 (1)
        iv_date       = ws_stdate ( eg :01.01.2007)
      IMPORTING
        ev_date       = ws_edate. (eg : 31.01.2007)
Reward if useful.
Regards,
Chitra

Field Date year and month

Hi,
I'd like to get only year and month field. E.g. 201409.
Could you please let me know how to do it?
ddwrt:FormatDate(ddwrt:Today(),0804,1)
Thank you.

Hi Denis - Can you use like:
formatted date "=TEXT(pickdate,"m") & "/" & YEAR(pickdate)"
http://weekbeforenext-blog.blogspot.in/2011/06/extracting-month-and-year-from-date-and.html
-prs

Formula to go across years and months to find the value

Hello,
I am having difficulty writing a member formula where the rate is supposed to come from anyplace that's available prior to that month and year. This is for Re-forecasting purposes.
The example of how the concept should work is shown below. I have tried @priors, @shift, and @rangelastval. None of these calculations have been able to go through multiple years at the same time to get the rate from previous years and month. It works in the same year across the periods but not both periods and years.
Any idea what calculation function or a combination of calculation functions I can use so the calculated amount goes back as many years and months possible until it finds the rate.
Year
Periods
Rate
Amount
Calculated amount
FY15
Jan
0
100
0
FY15
Feb
0
100
0
FY15
Mar
0.4
100
40
FY15
Apr
0
100
40
FY15
May
0
100
40
FY15
Jun
0
100
40
FY15
Jul
0
100
40
FY15
Aug
0
100
40
FY15
Sep
0
100
40
FY15
Oct
0
100
40
FY15
Nov
0
100
40
FY15
Dec
0.3
100
30
FY16
Jan
0
100
30
FY16
Feb
0
100
30
FY16
Mar
0
100
30
FY16
Apr
0
100
30
FY16
May
0
100
30
FY16
Jun
0
100
30
FY16
Jul
0
100
30
FY16
Aug
0
100
30
FY16
Sep
0
100
30
FY16
Oct
0
100
30
FY16
Nov
0
100
30
FY16
Dec
0
100
30
FY17
Jan
0
100
30
FY17
Feb
0.5
100
50
FY17
Mar
0
100
50
FY17
Apr
0
100
50
FY17
May
0
100
50
FY17
Jun
0
100
50
FY17
Jul
0
100
50
FY17
Aug
0
100
50
FY17
Sep
0
100
50
FY17
Oct
0
100
50
FY17
Nov
0
100
50
FY17
Dec
0
100
50
FY18
Jan
0
100
50
FY18
Feb
0
100
50
FY18
Mar
0
100
50
FY18
Apr
0
100
50
FY18
May
0
100
50
FY18
Jun
0
100
50
FY18
Jul
0
100
50
FY18
Aug
0
100
50
FY18
Sep
0
100
50
FY18
Oct
0
100
50
FY18
Nov
0
100
50
FY18
Dec
0
100
50
FY19
Jan
0
100
50
FY19
Feb
0
100
50
FY19
Mar
0
100
50
FY19
Apr
0
100
50
FY19
May
0
100
50
FY19
Jun
0
100
50
FY19
Jul
0
100
50
FY19
Aug
0
100
50
FY19
Sep
0
100
50
FY19
Oct
0
100
50
FY19
Nov
0
100
50
FY19
Dec
0
100
50
FY20
Jan
0
100
50
FY20
Feb
0
100
50
FY20
Mar
0
100
50
FY20
Apr
0
100
50
FY20
May
0
100
50
FY20
Jun
0
100
50
FY20
Jul
0
100
50
FY20
Aug
0
100
50
FY20
Sep
0
100
50
FY20
Oct
0
100
50
FY20
Nov
0
100
50
FY20
Dec
0
100
50
FY21
Jan
0
100
50
FY21
Feb
0
100
50
FY21
Mar
0
100
50
FY21
Apr
0
100
50
FY21
May
0
100
50
FY21
Jun
0
100
50
FY21
Jul
0
100
50
FY21
Aug
0
100
50
FY21
Sep
0
100
50
FY21
Oct
0
100
50
FY21
Nov
0
100
50
FY21
Dec
0
100
50
Thanks in advance!

ELSE
IF (@PRIORS(SKIPMISSING, RATE) == #Missing)
IF (@ISMBR(&FcstYear7))
"Amount"=Amount*@PRIORS(SKIPMISSING,"Rate",(&FcstStartMo:"Dec"->&FcstYear1, "Jan":"Dec"->&FcstYear2,"Jan":"Dec"->&FcstYear3,"Jan":"Dec"->&FcstYear4,"Jan":"Dec"->&FcstYear5,"Jan":"Dec"->&FcstYear6)));
similarly repeated for the years 6,5,4,3,2 but it gave the following error "Error: 1200400 Error executing formula for [Check_1] (line 9): scalar double argument expected in function [@_UMINUS]"
How can I use XRANGE in this because the function has the following limitation?
@XRANGE can be used only in these functions: @AVGRANGE, @SUMRANGE, @MINRANGE, @MINSRANGE, @MAXRANGE, @MAXSRANGE, @STDDEVRANGE, @MOVSUM, @MOVAVG, @MOVMIN, @MOVMAX, @MOVMED, @SPLINE.

Year and month wise results

Similar Messages

Maybe you are looking for