Yellow cast in rgb preview mode after Windows 7 install

After installing Windows 7 over my Vista OS Photoshop has been applying a light yellow cast to everything I try to view in Proof Colors mode. So anything white looks yellow, and all other colors have a yellow overtone. This is really screwing up my web design productivity because while I am creating my files I have no idea what the actual color/saturation is going to look like until I save the design and view it in Explorer.
I called Adobe tech support about this over a week ago. Together we checked my profile color settings and monitor settings, installed all Photoshop updates, and I even uninstalled and reinstalled the program. After an hour of doing all these things we still hadn't solved the problem. Adobe tech said they would "escalate" my ticket, but a week later I still had heard nothing more about the problem. When I called back yesterday they said they are aware of the Windows 7 issue but currently don't have a fix for it, and I was told that when they knew how to fix the problem they would call me. Meanwhile the yellow continues and I'm left here clueless and tapping my fingers. Specifically, I am seeing yellow when I go to VIEW> Proof Colors (using any of the Proof Setup options offered in the drop down list - although "rgb monitor" is my goal.) Has anyone else experienced this and maybe found a fix (with or without the aid of Adobe)? I'm open to any work-arounds or suggestions. This is extremely frustrating. Thanks!

I am having the same problem, but I have a pink or pinkish mauve overcast. I have tried for 6 hours today to correct it even doing a clean sweep and reinstalling the program. What appears to be happenning is that the grey in the spectrum is not returning grey but a different spot on the colour chart to the program. The same is true in Lightroom.
In reinstalling I even made sure the preferences were erased. This problem is particular to Adobe and not my Corel or other Graphic programs

Similar Messages

Laptop doesn't wake after sleep mode after Windows 10 update

I usually lower the laptop lid when i want to put it into sleep mode; after the windows 10 update, this stopped working. I tried putting it into sleep mode from the start menue. This causes the screen to become black, but power to remain on ( I can see this from a steady light from the power button whereas sleep would have a flashing power button). The laptop's fan also increases in speed. When I try to wake the laptop, nothing happenes; I have tried to use ctrl+alt+delete, however this also does not work. I am ususally forced to resort to a manual shut down via holding the power button for a few second and restarting the laptop. I have tried updating the display adapters, restarted the laptop, and still no result. Does anyone know why this is happenning and how I can fix it?

I was having the Exact Same Issue. The reason I decided to go back to windows 8 was because since upgrading to Windows 10, when my computer goes into sleep mode, I cannot wake it up. I have to press and hold the power button to shut it done and restart. Even if I close my laptop, and reopen the lid, it wont start back up and I have to press and hold the power button and shut it down and restart. After trying to restore my HP Envy Laptop from Windows 10 to Windows 8, it got stuck in a Repair PC Loop and I could not even access the desktop, I tried the restore option to an earlier date and that failed and all the repair options also failed. The last option I had was to do a full PC Refresh, and that one worked. It took about an hour but no data was lost, and only a few of my downloaded apps were removed. An html url was left on the desktop that showed a list of all the apps that were removed. So all I did was download those back and now im back up and running Windows 8.

RAID after Windows install on Z77A-GD65

Hey guys,
I've been looking around for a long time for a clear answer, but can't seem to really find one. I got three 3TB disks that I want to run in RAID 5, but I already have Windows installed and don't want to reinstall it.
I've read a lot about doing it via BIOS and UEFI not working properly or needing a lot of work before it works correctly, but no conclusive results or guides on how to do it. I've read and tried a few of the online guides that include registry changes etc., but none of those seem to work. I really just want to get the array working. If it's really just not possible, I wonder if it's possible to do when I install a new Windows (probably W10 by then), because again, I read stories about that and it's supposed to be possible, but the descriptions are too vague.
So, is it possible to RAID 5 my disks IN UEFI after installing Windows?
Thanks in advance!
Boeman

Is the windows installation on one of these disks?
RAID 5 needs initialization before it is first being used so it isn't possible to keep windows if it is on one of the disks being RAIDed.
I remember there was a way to change SATA mode from IDE to AHCI or RAID on the P45, but last experience I had with transferring windows(XP) from one disk to another with ghost did not work well. It did boot but network was disabled and Microsoft assistant told me I must reinstall windows.
There was also a procedure to migrate windows between different platforms for windows XP, but you had to "repaire" installation (rather clean Install) which is almost like clean Install without reinstalling other software.
Best start fresh as suggested by Nichrome, shortcuts always result in wasting more time.

Can't boot into Mac OS after Windows install via Bootcamp

Hello.
Last night I installed Windows 7 on my Macbook Pro early 2011 via Bootcamp.After some major complications I was able to finally install Windows 7 and boot into it. Now I can't boot back into my "Macintosh HD" partition, it shows a no entry sign.
Hard Disk : 320GB Internal Sata
Partitions : 3 -> Mac, Bootcamp and 10.8 Recovery Partition
The good part is that I can still access the Mac OS partition in Windows and Windows is working perfectly fine. As a matter of fact right now I'm on the bootcamped windows.
I have a full time machine backup but still I am looking for a way to solve this without formatting the HDD.
Things I have tried:
1. Resetting NVRAM and PRAM
2. Booting into 10.8 recovery partition and running DU.
SMART Status : Verified
"Macintosh HD" grayed and Not Mounted
Successful Verify Permissions (Twice)
Is there a way to solve this? Though the Mountain Lion partition shows when I press the Alt/option key on startup but I can't somehow boot into it.
Thanks

Your problem is OS X is refusing to boot.
There is still a bootable volume on the Macintosh HD partition, it's just not working.
You can #8 Reinstall Just OS X while command r booted from the Recovery partition, as long as you don't use Disk Utility to erase the Macintosh HD partition, your files and programs remain.
Hook the computer via Ethernet cable to a router (or modem, power reset required) with a fast relaible internet connection, you will need your AppleID and password to reinstall OS X.
Step by Step to fix your Mac

Remove or reduce Mac OS after Windows install

This may be an odd question, but first a little background.
I bought the 2011 MacBook Air as my first introduction into the world of Macs and thought it would also fulfil the occasional work duties due to the promises of how easy it is to integrate a Mac into a PC world since MS Office is available on both platforms. For personal use Mac OS has been a breath of fresh air, intuitive gesture support makes browsing and editing photos fun again as well as playing around with using it as a media server, and Keynote has taken over for my presentation needs.
However working as an accountant means MS Excel, Outlook & Sage are central to my working day and due to various incompatibilities in the office, such as Mail & Outlook 2011 failing to work with our office's 2003 exchange server for one, and MS Excel 2011 being very much the poor cousin to Excel 2010 I ended up setting aside a 64Gb (of 256Gb) partition via Bootcamp to run Windows 7.
Little did I expect how good a Windows PC the MacBook Air makes! Maybe it's the SSD drive but this thing easily lives up to the top of the range i7 HP desktops we use in the office so rather than using the Windows partition for the odd bit of remote working which was the plan two years ago, it is now my main work computer. In fact after I added a couple of Displaylonk adapters I now have a four screen set up (3 x 22" 1080p Dell monitors plus laptop screen) which is the envy of the office.
So, I've since replaced my personal Mac needs with a quad core Mac Mini and haven't booted into Mac OS on the laptop for months and as you can probably guess but that 64Gb is running out quite fast.
I know I can't simply resize the partitions without causing possibly major future headaches and all this MBR/GPT/EFI stuff is unfortunately a little over my head so don't want to do anything crazy (like formatting the Mac OS partition which I've considered) without first getting some advice.
I don't really fancy wiping out the Bootcamp installation and starting again if at all possible, and don't mind keeping Mac OS around but I know that it is highly unlikely that I'll ever need it again on my Air and would probably jump for the MacBook Pro if I ever did need a portable Mac again.
Any help would be greatly appreciated :-).

Thanks guys, so I guess that means formatting the Mac partition from inside Windows definitely isn't a simple option then.
So... this leaves me with a couple more questions I'm afraid.
Firstly, I've read that Camptune can cause issues later down the road as it doesn't update the partition tables fully (or something?) which can lead to the possibility of losing Bootcamp later on - but that may only be when updating OSX, which is something I don't really plan on doing so may not be an issue for me?
and Secondly, how easy is it to completely purge OSX?
I can't risk losing access to Windows for any length of time as my work life has become ridiculously hectic lately. So I can't really risk trying this until I have had chance to set up another PC as back up just in case something goes wrong. However with space rapidly becoming a premium on the Windows side it is a case of time is running out.

Boot Camp: Mac Pro won't start after Windows install

After installing Boot Camp on a Mac Pro dual 2.66 (firmware updated), XP installer went through installation & copying files, then restarted. Went to a black screen with white Windows-style text that said something along the lines of "XP cannot start from this CD, press any key to restart." Totally unresponsive, held down power to restart. Will no longer power up. Have reset the SMC without any effect. Makes a brief sound when trying to start, but does not actually start up.
Is there any known power issue that I might be able to solve myself, or is the supply likely blown?
Mac Pro Mac OS X (10.4.8)

I put Vista on its own dedicated drive, 64GB Vista, the rest as FAT32 to make it easier to share files. I had to remove the OS X drives in order to allow Windows/Vista to install. Once installed, had a black screen and some blue crash screen, until I ran the BootCamp driver updates.
I would try unplugging your drive(s) first and see if you boot from Tiger Installer DVD - or better, boot Apple Hardware Test (hold down "d" on startup from Install Disk #1).

How to open MAc os after windows installed

hi
today i install windows 7 ultimate in my 27\ iMAC after i cant open MAC OS what to do

You didn't say how you installed MS Windows so I'm going to assume you followed directions using Boot Camp. If that is correct then restart the machine when you hear the Startup Tone hold down the Option key and choose the volume that has OS X installed on it.
If you did not use Boot Camp then please restate EXACTLY how you installed MS Windows.

Firefox crashes in safe mode after clean install

Crash ID: bp-554928df-de36-4d6c-8965-d4bd02150127
Hi, just recently my Firefox 35 has been crashing at launch even in safe mode on Mac Os X Mavericks 10.9.5 on a Mac Mini 2.3 Ghz Intel Core i5.
I have tried:
- deleting firefox and mozilla folders in Application Support
- deleting org.mozilla.firefox.plist
- uninstalling flash
- reinstalling the browser
- downgrading to Firefox 34
and the crashes persist. I haven't had other problems with this computer.

Looks like there was a slight increase in the number of crashes with this signature, however there is still not alot known about it.
Would it be possible to see if this happens with nothing but Firefox open?
Since it is a start up crash please do the following to give us crash IDs that will help us understand more about the crash.
#'''(OS X 10.6 or previous)''' Click the '''Finder''' icon in the dock. Your home folder will be selected. In the right side of the window, click the Library folder to open it. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.<br>'''(OS X 10.7 or above)''' Click the '''Finder''' icon in the dock. On the menu bar, click the '''Go''' menu, hold down the '''option''' or '''alt''' key and select '''Library'''. A window will open containing your Library folder. Then open the "Application Support" folder, the "Firefox" folder, the "Crash Reports" folder and finally the "submitted" folder.
#Open the 5 most recent files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

Another case of phone in recovery mode after ios6 install

I see that many others are having the same problem.
What do I do to fix it?
I get the picture telling me to connect to itunes and when I do I'm told that the phone is in recovery mode and must be restored.
itunes is currently downloading the ios 6 software even though it has already been downloaded and installed on the phone.
Do I have to wait for the second download to complete and what steps do I take then?

Just click on the restore button and continue with the restore. It'll reuse the already downloaded ios6 and start from scratch.

Battery not detected after windows install. Batteries tab missing in device manager too

My eM250 still charges fine but I have no way to see how much juice I have left. no after market meters or anything like that has helped. How can I fix such an odd problem?

iluvwhtchix,
I've looked at the quick start and service guide and do not see a standby button, what am I missing? LoL
It just sounds like there are some drivers that did not install, was this with the media that was sent from eMachines? There might be a drivers disc that could resolve the issues, if so. You can always go check to see if you have the right drivers on our eMachines support page.

Restoring library after Windows install

I reinstalled Windows on my PC. Rather than restore the library from backup, in iTunes I selected added folder to library. This imported all my audio files. I have since downloaded additional songs as well.
Some of the songs previously had start and stop options settings. Now they reverted back to 0:00. I don't know what else is different.
What would happen now if I overwrite the library files?
Thanks.

It should go back to the way it was with the ratings, play counts, etc.
I think the start/stop times would be back in place, as well.
Easy enough to try, anyway!

No Services After Windows Install

I just finished a distributed install with a web tier box with only the plug-in and the app server box with everything else. My problem is that I don't have any services listed for any of the "Oracle BI" components. The only thing listed is the opmn process manager from my 10.1.3.1 J2EE/HTTP Server install.
Any thoughts on how this could have happened or if there is an easy way to recreate the processes manually.
Thanks
Matt

Hey guys, I'm just coming back to this, I've been playing with the security stuff lately and forgot this thread. I think it was everything except the web presentations services that I was installing. I'll go back through my customer notes and find out. It was a Win2K3 Server machine with all the latest patches.
And yes Aydin, its been a while since we talked. I'll give you a call sometime soon and catch up.
Matt

CR 2008 Add-Ins - doesn't go back to preview mode afterwards

I created a Add-In with no problems and it all works well. But when I run my add-in, Crystal Reports switches to design mode and stays there. But when I run the Add-In that is in the downloadable sample, it also goes into design mode but then automatically switches back to preview mode so that I can see the effects on my report. I looked through the code but don't see anything that would be the cause for why it goes into preview mode.
How do I get my add-in to go back into preview mode after it runs?
Thanks.

Briefly tested -
I think it's the report state after the ReportClientDocument.Save() rather than any configurations in the Designer or settings in the report.
The record selection formula is updated, but not the report view on Save.
If I add lines to export the report (to force a report refresh) before the ReportClientDocument.Save(), then it comes back up in Preview.
Filter filter = new FilterClass();
filter.FreeEditingText = "{Employee.Employee ID} > 12";
reportClientDocument.DataDefController.RecordFilterController.Modify(filter);
reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat, "C:\\testcraddin.pdf");
Sincerely,
Ted Ueda

Strange yellow color cast after CS4 install

I just ran into a strange problem helping a friend install PS CS4. Everything seemed to go fine, but now all of a sudden his images are displayed with a strong yellow tint. I don't mean a slight color cast, I mean a STRONG yellow tint. The images appear the same in Photoshop, the Bridge, and even ACR. I re-calibrated the monitor (Gretag McBeth) and generated a new profile just be sure, but that wasn't it. The same images viewed in other applications (Picassa, opened in a browser, etc.) on the same computer display normally. This appears to be only Photoshop related. What's also interesting is that CS3 now exhibits the same problem after the CS4 install.
I reviewed all the color settings and workflow, and nothing is out of the ordinary. The Nikon raw images were imported via ACR, and opened in Photoshop with ACR workflow options set for 16 bit/Adobe RGB. Photoshop working space is Adobe RGB. I also installed the 11.0.1 update. But here are what may be a couple of clues. First, it's not just the image files that look bad. The colors are awful in the color picker in the toolbox. The entire color picker slider is almost all yellow and orange. And here's another good one. We tried importing some new raw images via the photo downloader in Bridge. With the downloader in Advanced mode, the image previews before download show the same yellow cast. But after I click the Get Photos button, the image colors appear correct as they flash on for a couple of seconds while being downloaded. This has got to be a big clue for someone. What's different about how the image is displayed during that two second preview during the actual download?
The PC hardware is a 3.2Ghz Pentium 4 Dell tower (2G ram) running XP Pro w/SP3, with a nVidia GeForce 7800 graphics card, and the screen resolution is 1024x768. I'm thinking maybe a graphics card issue or corrupted system profiles, but I'm a Mac and he's a PC so my PC troubleshooting skills are limited.
Has anyone else seen a problem like this before?? Any ideas? Thanks!
Ed

Unable to view photos after adjustments (except in preview mode)

I upgraded to Aperture 2.0 and would like the program but for an annoying glitch. Each time I open aperture I can make edits to one or two photos without problems, but then photos start to disappear from the viewer window. There is nothing but a blank canvas where they were. The photos will only reappear after a restart to aperture. The will appear in Preview Mode just fine.
Anyone have any ideas what the problem could be. I recall this happening a few times with 1.5.6, but this is now happening every time I use Aperture 2.0.
Thanks.

yes I get this more often on my Powerbook G4, and have had it a couple of times on my brand new MacBook Pro. With the MBP it's usually half or quarter of the image turning black. With the PG4 it's the whole image turning black. There are several threads on here about this issue with lots of respondents. This issue existed in 1.x and was fixed at some point (was gone in 1.5.6). Sadly it's returned.

Yellow cast in rgb preview mode after Windows 7 install

Similar Messages

Maybe you are looking for