Yellow Color, printing with ////////////// on classical report print outs?

Hi Experts,
I hv been used the COL_NEGATIVE and COL_TOTAL in my classical report for the SubTotal purpose. On the screen, they r looking fine.
But,
When am printing it on SAP Printer, am getting like, /////////////////////// over my totals!
So,
Is it my printer fault?
OR it is a property of theses clours? I mean, I need to change the clour to like, CLO_KEY!
thanq.

Hi
No doubt it is purely a Printer problem
certain printers will behave like that for colors
I hope there is some OSS note also reg this
If you wants to take out print of the Report
better don't give colors to the fields and the data
Reward points for useful Answers
Regards
Anji

Similar Messages

Print Logo in Classic Report (Write Method,Not ALV)

Hi All,
I'm currently doing conversion of the All the Classic Report with addition of Header with 'LOGO'.
I'm willing to find out that Function (CALL FUNCTION 'WWW_GET_MIME_OBJECT') is only able for display but not show out during printing.
Is that any method, I can do it(Print with Logo) without conversion to SAP Script or Smartform that was exhausted.
*Please take note is Classic Report with Write Method (Line by Line), Not ALV.
Thank you all in advance
Regards,
Trevor Wong.

Hi,
It is possible to include logo in classical report but its not possible to print logo in classical report. It can be done in ALV's.
Write the code in Top-of-page event in ALV.
The following is the code for inserting the logo in ALV.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
           I_LOGO             = 'ENJOYSAP_LOGO'
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM.
Regards
Purnand

I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS. If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

Print LOGO in classical report printout

Hi GURUS,
Is it possible to take print of logo in classical report.

refer this link:[click|http://tinyurl.com/5s22vp]
the code is copied from that link.
Make the changes in the code as given below.
REPORT zgb_prog06.
* START OF DO NOT CHANGE***********************************
DATA: docking TYPE REF TO cl_gui_docking_container,
      picture_control_1 TYPE REF TO cl_gui_picture,
      url(256) TYPE c .
DATA: query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
      html_table LIKE w3html OCCURS 1,
      return_code LIKE w3param-ret_code,
      content_type LIKE w3param-cont_type,
      content_length LIKE w3param-cont_len,
      pic_data LIKE w3mime OCCURS 0,
      pic_size TYPE i.
* END OF DO NOT CHANGE*************************************
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.                 "Remove this event
START-OF-SELECTION.
write 'Testing picture printing in classic report'.
PERFORM show_pic.                                      "Add it here
end-of-selection.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
    EXPORTING
      border = 5.
CALL METHOD picture_control_1->set_display_mode
    EXPORTING
      display_mode = cl_gui_picture=>DISPLAY_MODE_FIT.
CALL METHOD picture_control_1->set_position                      "change positions
    EXPORTING
      height = 70
      left   = 800
      top    = 20
      width = 190.
*CHANGE POSITION AND SIZE ABOVE***************************
IF url IS INITIAL.
    REFRESH query_table.
    query_table-name = '_OBJECT_ID'.
*CHANGE IMAGE NAME BELOW UPLOADED IN SWO0******************
    query_table-value = 'ZLOGO'.
    APPEND query_table.
    CALL FUNCTION 'WWW_GET_MIME_OBJECT'
      TABLES
        query_string        = query_table
        html                = html_table
        mime                = pic_data
      CHANGING
        return_code         = return_code
        content_type        = content_type
        content_length      = content_length
      EXCEPTIONS
        object_not_found    = 1
        parameter_not_found = 2
        OTHERS              = 3.
    IF sy-subrc <> 0.
*      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CALL FUNCTION 'DP_CREATE_URL'
      EXPORTING
        type     = 'image'
        subtype = cndp_sap_tab_unknown
        size     = pic_size
        lifetime = cndp_lifetime_transaction
      TABLES
        data     = pic_data
      CHANGING
        url      = url
      EXCEPTIONS
        OTHERS   = 1.
ENDIF.
CALL METHOD picture_control_1->load_picture_from_url
    EXPORTING
      url = url.
*Syntax for URL
*url = 'file://D:\corp-gbanerji\pickut\cartoon_184.gif'.
*url = 'http://l.yimg.com/a/i/ww/beta/y3.gif'.
ENDFORM.                    "show_pic

How to print watermark in classical reports?

How to display the watermark in classical reports?

hi
go to se78 graphics -> enter
BMAP(BITMAP IMAGES)
Name MYBMP
select radio button
color ->import
filename: c:\pictures\123.bmp.
name : mybmp
description : BMP ->continur ->save.(activate it)
now go to se71->choose the prog -> layout ->right click ->create graphics.
utilities -> printing test -> output device -> LP01.
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
dinesh

Problems printing with older Classic applications using OS 10.4.8

Newly installed OS 10.4.8. Unable to print from older applications using OS 9.2.2 Classic capability. Error Messages: (1) Not Apple Event Aware. (2) Desk Top Print 2.0 not installed. What is my remedy?

Using latest driver for HP5M printer in both Classic and OSX modes. Printing is OK in all applications except Avery Label Maker and MacProLabel Maker which are very old applications. I didn't have this problem with OS10.2.8. I get the same identical error messages for each as previously stated. I had a similar printing problem with Claris Draw but no error message. I reformatted my old Claris files and now can print.

PE7 Color Management with a Non Postscript Printer

Hello,
I have an Epson Stylus Photo R800 and images are coming out quite dark, sometimes with a blue cast to them. My monitor is calibrated via the Pantone Huey Pro and I'm curious if anyone could help me in figuring out what adjustments to make so that my prints are "close" to the original. I know that WYSIWYG is not possible, but I should be able to get closer than I am. LOL.
If there are any books or tutorials that would help me in particular, that would be helpful to me as well. I also have the ICC profiles for the Epson paper that I use. The issue in part at least appears to be that PE7 won't manage or allow color to be managed unless the printer is a postscript printer. There don't appear to be any postscript drivers for my printer on the Epson website. Perhaps there are some 3rd party utilities that could help as well.
Thanks!
hselburn

Well I went to the websites mentioned and I found out where to set the printer profile in elements, but it still comes up with the postscript error message, stating that calibration is inherently a postscript function and as the Epson Stylus Photo R800 is not a postscript printer, it turns calibration and color management in general off. *sigh of frustration but not giving up!*
That does explain why the colors are so far off. I wonder how to apply my printer *and* monitor profile to elements. I believe elements uses my monitor profile by default, but if it won't turn postscript off so that it is compatible with my printer, that won't work. Wish I could afford the full photoshop, this might not be a problem then.
I also tried saving the file as a pdf but that did not work. If I'm not mistaken, and I could be, that also includes postscript by default, which as I got the postscript error message again when I tried to print the pdf, I would have to believe it does. Is there a plugin that might help?
Funny thing is the original image is in the .jpeg format, not eps.

Classical Report Print

Hi Guru's,
I need to print the classical report.
Normally, once the report is executed i choose a print button in menu and print the output while printing it automatically print it in landscape format but i need to print in portrait format whether any option is there to make it out or basis people anything need to done.
Classical report is possible to convert in pdf format if we able to it could you please give me the example program for this.
Advance thanks

http://www.erpgenie.com/sap/abap/code/abap51.htm
check this link...............
Reward IF...........
Regards
Anbu
Edited by: Anbu B on Jul 3, 2008 8:52 AM

Error with FOP for Report Printing in Apex 3.2.1

We are trying to use FOP deployed onto GlassFish Community but after setting up as described in the applicaton express guide to allow report printing; we are getting the following error
'package oracle.xml.parser.v2' does not exist
We are running GlassFish on Debian 5.0 (Lenny)
Any help appericated :)

Here is what I did to get it to work.
1. Copy xmlparserv2.jar from my ORACLE_HOME/oc4j/lib directory to my glassfish domains/domain1/applications/fop/WEB-INF/lib directory.
2. Added the following two lines to the glassfish domains/domain1/fop/apex_fop.jsp before the driver.run() line
out.clear();
out = pageContext.pushBody();The second part of solution I found on another forum page.

Printed XML Purchase Order Report - Printing blank Blanket PO page

Hi,
When printing the xml report of a Blanket PO Release, the release lines and headers print first but the last page is a page for the primary blanket PO (PO Num without any releases attached). This page does not contain any information in the header or line fields therefore it is a waste of paper. Looking into the XML code the blanket PO page is pulled in the same manner as the Release lines, against G_Headers. I'm going to look into the Reports Developer SQL to see if I can find something but I would rather not mess with the configuration of the SQL if I did not have to.
Any ideas on how to get rid of this extra unnecessary page?
Thanks,
-Steve

Hi,
RDBMS : 11.2.0.1.0
Oracle Applications : 11.5.10.2
OS: Unix
The issue can be reproduced.
The report in question has had customization but the blank page prints in the Printed Purchase Order Report(Portrait) seeded function as well. From what I see the SQL might be able to modified based off of the input paramet "Print Blanket PO". When this is selected "No" the Blanket header is printed with no lines (that's where the blank PO page is coming from). When selected Yes the blanket header with all the blanket lines are printed. So I may be able to go in and change how that input parameter changes the output, unless there is a better way.
-Steve

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

Trouble printing with my HP Deskjet printer using CUPS and hplip

tl;dr This 1,646 word post describes my frustration with CUPS and hplip. I cannot get my HP Deskjet F4400 set up with CUPS, and all the solutions I've tried don't work.
I'm running Arch Linux ARM on my Seagate DockStar, a small ARM-based "plug computer" that I use as a home server. My printer is the HP Deskjet F4480, which is part of the HP Deskjet F4400 series.
I previously had CUPS set up to share my printer with my home network, using hplip for the printer driver. I never upgraded CUPS or hplip because those versions worked fine, and I didn't want to break anything avoid breaking anything. The versions that I was using had to have been at least one to two years old.
Everything was working very smoothly... until a few days ago. The drive I was running Arch Linux ARM on became corrupt, so I had to install a fresh copy of the operating system. That meant losing all of the working versions and configuration files each application I had installed, including CUPS. I thought I had a backup image of the drive, but it didn't work when I tried to restore it. (Yes, it was stupid of me not to test my backup.)
Setting up CUPS was one of the first things that I wanted to do after reinstalling, since my family depends on the network printing functionality almost daily. Unfortunately, I could not get CUPS to work with my printer correctly. It wouldn't be able to display a list of drivers, HP's setup utility encountered an error adding it, and it threw various errors when I tried to print test pages. I ended up reading hundreds of forum posts, wiki articles, and CUPS/hplip tutorials to try to figure out how to properly set it up. I ended up spending a total of nearly ten hours trying to get the printer to print with CUPS, and it's still not working after all that work.
I'm going to explain in this post some of the many things that I've tried so far. I just removed all of the printing packages from my system and any extra files that were left behind. I'm now going to be installing all of the packages again and documenting everything that I have been trying to do to get it to work. I'll try to include exact error messages and logs where necessary.
1. I first found this article on the Arch Linux ARM website on how to set up a CUPS printer. I didn't really want to use webmin, but I did it anyway so that I could follow the guide. I installed all the packages mentioned except for cups-pdf, since I didn't need print to PDF support. Everything installed smoothly, and I configured CUPS and webmin to allow access to other computers on the network. I started to notice problems in the instructions - /etc/rc.d/cups was actually /etc/rc.d/cupsd, /etc/printers.conf was actually /etc/cups/printers.conf, and webmin didn't actually add anything to the printers.conf file. I uninstalled webmin at this point because I didn't need it, and I decided I wasn't going to follow that guide with incorrect information.
2. I then tried to set up the printer on my own using the CUPS web interface listening on port 631. I clicked the Add Printer button and it switched me to the HTTPS web interface. I then logged into the root account and was presented with the list of printers. My printer was listed as "HP Deskjet F4400 series (HP Deskjet F4400 series)", so I selected it and continued. I saw a list of printer models (PPD files) ending in CUPS+Gutenprint v5.2.9. There was no entry for my printer, so I tried the "HP DeskJet Series (en)" one. I set the default options and chose Maintenaince->Print test page. I then got a ridiculously simple error: "Unable to print test page: No such file or directory". How do I even know what file or directory it's referencing? I read online that it may be because I'm not in the lp group, but root is indeed in there. I saw in the error log "Avahi client failed: -26". I started dbus and avahi-daemon just in case, but I still got that silly error. I restarted cups and the same error message occured.
3. I researched online that pretty much the only way for my printer to have a driver would be to install hplip. Before installing hplip, I uninstalled CUPS, leaving cupsd.conf but deleting printers.conf. Then I installed CUPS and hplip together, with hplip requiring foomatic-db, foomatic-db-engine, and foomatic-filters. Everything seemed to install correctly. I started CUPS again and then ran hp-setup -i to try to install my printer. I selected USB and it found my printer, hp:/usb/Deskjet_F4400_series?serial=[printer serial number here]. I entered a simple name and then was told that no PPD file was found for the printer but that I could specify one manually. There were none I could find online; everywhere it just said to install hplip. I used the find command to find "f4400" and finally found 2 compressed PPDs located at /usr/share/ppd/HP/hp-deskjet_f4400_series-hpijs.ppd.gz and /usr/share/ppd/HP/hp-deskjet_f4400_series.ppd.gz. I gunzipped both of them and pointed hpsetup to the hpijs one, knowing that I was using the hpijs one when it was working before. It told me "Description for the file: HP Deskjet f4400 Series hpijs, 3.12.6". Hooray! I selected to use it, but then setup failed: "error: Printer queue setup failed. Please restart CUPS and try again." Ugh!
4. I restarted CUPS and went into the hp-setup process again. It gave me the same printer queue setup failed error. I don't know if these entries in the CUPS error log are related or not, but these errors relating to foomatic showed up. I restarted CUPS again and this time used the non-hpijs file with hp-setup. This one was called "Description for the file: HP Deskjet f4400 Series, hpcups 3.12.6". It failed again with the same error and the same entries in the error log. I found lots of posts online about this error, but none seemed to have a solution that would work for me. Now I tried running hp-setup in debug mode with -g. Here is what it said before the error. I then tried to Google "debug: addPrinter() returned (0, Unable to connect to CUPS server)". I saw on an Arch bug report to install dbus-python and python2-gobject, as well as create a symlink for /usr/bin/python2 to /usr/bin/python. It didn't work - same error.
5. I then tried to add the printer to CUPS via its web interface. Now there were two listed, HP Deskjet F4400 series (HP Deskjet F4400 series) and HP Deskjet F4400 series USB [printer serial number here] HPLIP (HP Deskjet F4400 series). So, hplip added the second one. I tried both of them, but after clicking Continue the page started to hang. I got another stupid, undescriptive error. "Unable to get list of printer drivers: Success". I saw the same foomatic errors in the error log as before. I then started reading the ArchWiki page on CUPS, located here. I tried the blacklisting usblp. I tried changing the permissions on the device node, although this starts to become ridiculous that it is even required to do that. Nothing was working; the printer installation still didn't work with hp-setup or with CUPS. Then, I found what I was looking for: the exact error I had on the wiki page! It said for "Unable to get list of printer drivers" you should "Try to remove Foomatic drivers." WTF? Foomatic is required for hplip, and hplip is required for my printer. I can't do that. Forum posts say to try that or do the permissions or usblp thing. Nothing is working.
6. I tried various other things to get it to work, even though I knew they probably wouldn't make it any different. I copied the PPDs from hplip to another folder and uninstalled hplip and foomatic. I then added them to /usr/share/cups/model and CUPS successfully found them and set up the printer. I reinstalled hplip and foomatic since they're needed for those PPDs to function, and I tried printing a test page. It failed. I tried using the CUPS web interface to modify the printer driver; nope, that wasn't going to happen: "Unable to get list of printer drivers: Success".
That concludes the list of some of the things that I have tried so far. I really want to get this printer working, but right now I am really fed up with CUPS and hplip. It's things like this that make me hesitant to recommend Linux to anyone else. So much manual configuration and tinkering the inner workings of things is required to do tasks that would be quite simple on Windows. For example, I can plug this printer into my Windows 7 machine right now, wait for the driver to automatically be installed and configured, and have a test page in my hands less than a minute after I first plugged in the USB cable. I can share the printer with any other Windows machine on the network by checking a single checkbox.
But back to my problem with getting the printer to work on my DockStar. I just uninstalled all of CUPS, hplip, and foomatic again and removed all of their files. I can walk through things to try that you guys post and then give you full logs of everything - just give me exactly what to do and install and the exact order to do it all in. I just don't know what to do at this point and am so frustrated with this that I'm about to give up.
Does anyone have any suggestions on how to get this printer working? I know this was a very long post, but I just wanted to explain everything that I've tried and how nothing worked. I really hope that we can figure this out so that I'll be able to print, and maybe it'll solve a few other people's problems with their printers, too. Thanks for reading, and thanks in advance for the help.

Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
make sure these packages are installed or install them
pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
pacman -S system-config-printer-gnome
rc.d cups start
To add device and install hp driver:
1. Run ‘hp-setup’ as root.
2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
run system-config-printer as root, to add printer
# system-config-printer
click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
you should be ok from here, if not some further steps:
If you encounter the following error:
File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
debugprint (host + “: ” + args)
TypeError: cannot concatenate ‘str’ and ‘list’ objects
You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
4). Finally, you can run hp-check to see what problems exists for the printer.

Problem printing with HP Photosmart 7520 printer. Same bad result independent of advanced settings.

How can it be that, no matter what settings (advanced, custom, PS manages color, Printer manages color,...) I get the same terrible result for a reference photo (dull, colorless)? It is as if the PS CS6 is not controlling anything with these settings. Is there something else I need to set to make this work? (Old HP Photosmart 7960 works fine, but they stopped manufacturing new photo cartridges). The 7520 all-in-one makes copies of graphics with excellent, accurate color rendition so it is something with the settings for the printer. The device can print good color. HP support says its Photoshop settings. I don't know what it is.
Thanks for your help.
-Jeff

Hi Pirazok,
Welcome to the HP Forums.
I am going to give you a document that deals with when the Printer Does Not Maintain Wireless Connection. This document covers a wide span of troubleshooting steps that I think may help with the issue you seem to be having.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Pin names and numbers do not print with black and white printer setup option

Multisim V12
Printer HP LaserJet 1320
File -> Print Options -> Print Sheet Setup, check In black/white, OK
Then
File -> Print Preview, shows all elements of the drawing in black white
Then select Print and the drawing prints without pin names and pin numbers.
The same procedure with the black/white unchecked previews in color and then prints all circuit elements

Hi HiZTrace,
I used Multisim 12 with the same configuration and printed with a HP LaserJet 4250, but it seemed to be working well for me. There could be some incompatibility issue with your printer driver. A workaround you can try is to install a PDF Converter and print the file in color, then print the generated PDF file in black and white. There are many PDF Converters available, for example, CutePDF Writer (free)
Sorry for the inconvenience.
Derek Z.
National Instruments

How to print with a dot matrix printer?

can anyone tell me how to print a document with a dot-matrix printer with java?

try this...
String printerUNC = "lpt1:";
String report = "This is the text to print"
try{
FileWriter fw = new FileWriter(printerUNC);
PrintWriter pw = new PrintWriter(fw);
pw.println(report);//"This is the test report");
pw.flush();
fw.close();
}catch(Exception e){
System.out.println("Error during print");
System.out.println(e);

Yellow Color, printing with ////////////// on classical report print outs?

Similar Messages

Maybe you are looking for