Yellow Discoloration - A New Switcher's Diary. Serial: 4H621
Hi everybody,
I have dreamed of getting a Mac for years. I decided to wait for the "new iBooks" to come out, so when I set off to college I would have a good, stable system which would service me for years (As I have come to belive Apple products do).
I live in Israel (about 5 mac and counting) And altough our local Mac supplier, Yeda, is known for being.... nasty, I decided to go ahead and order my white MacBook.
Only after ordering it did I see the post describing the Moo's, the glitches AND THE YELLOW STAINES.
Although I got my MacBook a week ago, I rushed to order my InvisShield, and have NOT TOUCHED ANY PART OF THE PALM REST OR TOUCH PAD. I hook it up to my extarnel keyboard and mouse.
I will only use it when I have applied the shield, and log any problem I may have with the Macbook when they accure. This, I hope, will alow new users to get first hand experience on using the MacBook, it's issues and IF THE SHIELD REALLY WORKS.
My Serial number is 4H621 ~ I smoke (a sin according to this forum) ~ wash my hands before every use ~ will only use the Mac with the shield.
- Will it stop the yellowing?
- Will my Macbook, one of thousands sold
be plagued with problems?
- How will the authorised reseller in a small country
handle the issue?
- Will It live up to my high hopes?
I plan to be 100% honest. If It doesnt get yellow or moo, i'll tell you. If I dont wash my hands - I'll tell you.
IF APPLE SHUT DOWN THIS POST - ILL TELL YOU.
According to the rules, I'll end with a question:
Week 1:
Shield:
None
Toouching:
Havent touched any part MacBook yet, aside from opening and closing.
tasks operated:
almost none. keyboard hooked up, havent used it for more then 10 minutes a day, havent launched any application.
Color:
perfect white.
Have I been a good boy:
Yes, havent touched the thing once.
Should I continue with this post, readers?
It's a real shame that this is happeneing really, as design flaws like this ought never to get out of the beta stage.
Still, for me, my MacBook is all about what's under the bonnet, and if that screws up, then it's a straight return. I think that it's nigh on impossible to get a perfectly formed computer anyway, and Apple will have design margins. Still, this yellowing is slightly too much IMHO.
My old PB get so dented and things as I used it to play live and carried it around with me everywhere that I have kind of stopped noticing these things. It got blotchy at the palmrests from sweat. What really mattered is that it kept working right until the day it got nicked, and I pushed that thing very hard indeed.
I guess what I am trying to say is that Macs do cost a lot of money, and so we should expect good quality design, but when it comes down to it, what you are paying for is a very powerful, stable system that you can rely on, and for me, that alone is well worth the price of my MacBook.
Best, Fred
Similar Messages
-
Unless otherwise noted, your Submission should either be a technical support question or a technical support answer.
Locked by an Apple Discussions Host
I have a three week old Macbook. The plastic on the palm rest and on the screen bezel where you open the screen has begun to have a yellow discoloration. At first, I thought it was dirty so I cleaned it with the stuff that I used to clean my iBook with and it had no effect (tried several things, a damp cloth, Windex, Magic Eraser). I thought it was some dirt from touching it but then I noticed that it was starting to appear at the bottom of the screen, where I have never touched this thing. I am concerned that there is a problem with the plastic that they made the palm rests out of. It is a different material than what was used on the iBook, I think.
So, does anyone have any insight into what caused this or how to clean it off? I know it doesn't affect how it operates but I don't want a brand new laptop that looks like I chain-smoked three packs a day while using it.You don't work for Apple's customer relations (PR) department do you?
Hardly. I think you misunderstand me. Firstly, by "minor", I mean that a surface defect is far more preferable for me than the various other defects that I have seen reported here. I have no screen shadow artefacts, I have no whining, I have no "mooing", and my MacBook, whilst definitely hot, doesn't seem excessively so. But let me get this straight: I am well and truly not happy (to put it mildly) that my three week-old MacBook has yellow discolouration of the sort that I would expect on a product at least a couple of years old (especially when my two year-old iBook has no such problems). But on the other hand, I don't want to take it anywhere near the Regent Street store (I have had dealings with them before - the "geniuses" themselves are pretty good, but getting anywhere near them, and actually getting your computer back, is another thing), and I can't afford to be without my machine. I bought this machine so that I could ensure my shareware app is Intel-ready, and frankly I'm scared of trying to exchange this MacBook for one that turns out to have one of the other, worse, problems (and yes, of course it is not really acceptable that there are any such problems, but I need a working Intel machine right now). As for my comment about it being a cosmetic defect about which Apple are unlikely to do anything, I'm merely being realistic - I think it will be hard to get Apple to care about "cosmetic" issues now that they have your money. But like I say, if that's not the case, I would be interested in hearing about it, because I am going to get in touch with Apple Care about this myself...
MacBook white 2Ghz, iBook 1Ghz, MacMini PPC Mac OS X (10.4.6) -
I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?
You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that. If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online. You can also download thru the following page if you can find your version:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can have the first installation deactivated to free up the activation and have it available for another machine again as well. YOu need to contact Adobe Support thru chat for that. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Adding a new switch to the network....configuring internet access
Hey guys i need some help!
I am trying to set up my first switch. I am using the catalyst 2950 for learning on.
The network im on right now (the one with internet) has the following settings.
10.22.227.???
255.255.255.0
10.28.43.254
The one i am learning on i connect to it by going to 192.168.0.1 this will allow me into it using the Cisco Network Assistant.
I have a laptop on port 1 using Vlan1 and i have Desktop on port 24 with vlan 1 and i have a cable from our 10.22.227 network pluged into port 23
I am able to see the computers and i can share files on it. What i dont understand being a noob is why i dont have any internet on ether computer.
I have setup up port 23 as a switch.
It seams like to me i would have to give the switch a ip address a subnet mask a default gatway and a dns of the 10.22.227 network on port 23.
Can some one throw some light on the subject and point me in a good direction?@de fl
If i go to a computer on the 10. network i can ping and go out and do everything i need to.
But if i try and ping with in the new switch (192) it does not work. I have added an ip address and a default gateway I have added a screen show on how our network is set up.
To me i think i need to add a ip address subnet mask and default gateway to the switch for the new switch to work. -
Installing Photoshop CS4 from original Disk onto my new Macbook Pro. Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep. How do I resolve ?
Tina Hadley did you migrate/transfer your applications over to your new Macintosh? If so this could cause problems with your serial number being recognized. Please run the available uninstallers located in Applications/Utilities/Adobe Installers folder. Once this is done you will also want to run the CC Cleaner Tool. Details on the use of the CC Cleaner Tool can be found at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
-
Check a new switch with command
Hello,
I am newbie
I have new switches, so which commands are enough to check all about a switch?(excluded show inventory, show version command)
Any help is appreciated,Hi,
sh tech support will give you the result of all available show commands.
Regards
Karthik -
New Switcher digital video questions
Hi all,
I am a new switcher as of 2 weeks ago when I picked up a new iMac. So far I love it but I do have a few questions. I imported a TON of miniDV video (150GB). I noticed on one tape that the clock had been set wrong. It now shows up in the wrong folder under iMovie. Any way I can change the files to reflect the right date so it gets put in the right place?
Also, I just tried to run iDVD. It will not run, it seems to just start and quit. Anyone else have this problem?Unix provides a function known as Touch which will modify the dates modified and created for files. You can learn more about it here:
http://www.osxfaq.com/man/1/touch.ws
If you open the application Terminal in Applications -> Utilities, and drag the said file after inserting the touch command of your choice (providing a space between the complete command sequence and allowing the path of the file to show up), and then hit the enter key, you will be able to modify the date created and modified on the Finder. I don't know how iMovie sequences its own folders, but that's how to change the Finder info for the file.
If iDVD doesn't work you may have insufficient space to create a temporary file, or something else is the matter. How much free space do you have? Is your new iMac one with a Superdrive according to the box? -
Trying to install cs5.5 onto new pc, have old serial number...
trying to install cs5.5 onto new pc, have old serial number... but can not find how I even start process. Yes, it is installed on a MAC, where I still want access.
You cannot install your Mac license on a PC. Serial numbers are platform specific. There's no way around that.
Mylenium -
Adding new switch in my network including Cisco Prime Infrastructure
hi all,
if I connect new switch to my network, can I let Cisco PI to apply a specific template of configuration to this switch automatically?
how can I do that ?
thanks in advanceHi,
i followed these steps :
SWITCH SIDE
- configured Prime Infrastructure as snmp-server host;
- enabled snmp-traps for linkup and linkdown events globally;
- disabled snmp-traps for linkup and linkdown on non relevant interfaces using the no snmp trap link-status command
PRIME INFRASTRUCTURE SIDE
- under "Deploy/Monitor Deployment" i deployed template "Interface Health" for all the interested switches
- under "Administration/System Settings/Mail Server Configuration" configured my internal SMTP server to make Prime Infrastructure able to send e-mails
- under "Operate/Alarms & Events" click on "Email Notifications" , then on "Switches and Hubs"
- check the "critical" box , insert the destination e-mail address into the "To" field then click "Save"
- check the "switches and Hubs" box and then click Save
As i know is possible to avoid to configure every single not-interesting port on the switches with "no snmp trap link-status" command (it's a bit annoying when you have tens of switches), using Port Grouping configuration on PI but i tried it without success.
Hope this helps.
Best Regards, -
I have CS5 photoshop extended on my mac home computer. I had it also on my mac laptop. I deactivated it from my old laptop and tried to install it on my new laptop and the serial number would not work. Any thoughts?
David o"bryan did you migrate/transfer any files/folders/applications to the new Mac laptop? You can verify that your serial number is valid by checking under your account at http://www.adobe.com/. You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
One way ping through new switch
NetTechMike wrote:
If a ping works one way, then it is almost always the firewall on the end of the connection
PING isn't a one way traffic item. It is bi-directional.
The ICMP echo request goes out and the reply is what you see at the command prompt when you get a "reply received"
So, if PING really is replying with a proper response and not a "destination host unreachable" then there isn't a thing wrong on the routing side, it'll be the firewall.Hello!A few days back we installed a new switch (HP 1620-24G JG913A) for a new office inside our building. The switch is connected to the same one in our server room. The computers inside the office are functioning perfectly as far as the users are concirned. They can use network printers, open helpdesk tickets, access the intranet, internet, etc.
However, even though everything was functioning well in the old office (the machines are the same ones), nothing going the other way can get through. They can't be pinged, Spiceworks doesn't recognize them (although they have agents installed), and, well, that's not nice.The two switches are configured identically, and googling for the solution hasn't turned up anything usable (for me). For now it's not a big issue, but I'd like to solve it, so that it wouldn't become a problem later.Any help...
This topic first appeared in the Spiceworks Community -
i am renew my switches on my LAN, and when connect the AP´s on my new switch the SSID "grafowl" do not assign IP address. the another SSID "guestwl" works fine.
old switch (C2950-I6Q4L2-M), Version 12.1(14)EA1a
interface FastEthernet0/17
switchport trunk native vlan 142
switchport mode trunk
switchport nonegotiate
no logging event link-status
duplex full
speed 100
spanning-tree bpduguard enable
new switch (C2960X-HBOOT-M) Version 15.0(2r)EX3
interface GigabitEthernet1/0/17
switchport trunk native vlan 142
switchport mode trunk
duplex full
spanning-tree bpduguard enable
AP
ap#sho running-config
Building configuration...
Current configuration : 3694 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
logging rate-limit console 9
enable secret 5 $1$nU1T$BDv0ZCyqR8YGI3CWOsNuL1
no aaa new-model
dot11 syslog
dot11 vlan-name VLAN001 vlan 1
dot11 vlan-name VLAN143 vlan 143
dot11 vlan-name VLAN300 vlan 300
dot11 vlan-name VLAN302 vlan 302
dot11 ssid grafowl
vlan 143
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 0234575C0207023555
dot11 ssid guestwl
vlan 302
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 135419045A18502E7B37
username Cisco password 7 123A0C041104
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption key 1 size 40bit 7 1E68F37A8CFE transmit-key
encryption mode wep mandatory
encryption vlan 300 mode ciphers aes-ccm tkip
encryption vlan 302 mode ciphers aes-ccm
encryption vlan 143 mode ciphers aes-ccm
ssid grafowl
ssid guestwl
mbssid
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.143
encapsulation dot1Q 143
no ip route-cache
bridge-group 143
bridge-group 143 subscriber-loop-control
bridge-group 143 block-unknown-source
no bridge-group 143 source-learning
no bridge-group 143 unicast-flooding
bridge-group 143 spanning-disabled
interface Dot11Radio0.300
encapsulation dot1Q 300
no ip route-cache
bridge-group 255
bridge-group 255 subscriber-loop-control
bridge-group 255 block-unknown-source
no bridge-group 255 source-learning
no bridge-group 255 unicast-flooding
bridge-group 255 spanning-disabled
interface Dot11Radio0.302
encapsulation dot1Q 302
no ip route-cache
bridge-group 254
bridge-group 254 subscriber-loop-control
bridge-group 254 block-unknown-source
no bridge-group 254 source-learning
no bridge-group 254 unicast-flooding
bridge-group 254 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
encryption key 1 size 40bit 7 9FD518A21653 transmit-key
encryption mode wep mandatory
no dfs band block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.143
encapsulation dot1Q 143
no ip route-cache
bridge-group 143
no bridge-group 143 source-learning
bridge-group 143 spanning-disabled
interface FastEthernet0.300
encapsulation dot1Q 300
no ip route-cache
bridge-group 255
no bridge-group 255 source-learning
bridge-group 255 spanning-disabled
interface FastEthernet0.302
encapsulation dot1Q 302
no ip route-cache
bridge-group 254
no bridge-group 254 source-learning
bridge-group 254 spanning-disabled
interface BVI1
ip address 10.7.142.53 255.255.255.0
no ip route-cache
ip default-gateway 10.7.142.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
line vty 0 4
login local
endcheck the L2 VLAN database on the switch and make sure 143 exists.
HTH,
Steve -
I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.
if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it. -
I wanted to tie my new iPhone by its serial number, but the message that it is already bound to another Id. Why, because a new phone?
Can you explain what you mean by "...tie my new iPhone by its serial number?"
-
Can you tell a refurbish from brand new macbook by the Serial Number?
Just wondering if there is any way to tell a refurbished macbook from a brand new macbooking using the serial number?
ThanksSo what I'm wondering is if I purchase a macbook online from them there's no guarantee that it's new??? It could be a refurb?
No, if you buy a new MacBook it will be new. If you go to the page and choose a refurbished computer, then you'll get a refurbished computer. There is no way to check the serial number until it arrives. If you went to an Apple retail store, the serial number is on the outside of the box. You could ask to see the box before you pay for it.
-Doug
Maybe you are looking for
-
Why won't Adobe Business Catalyst log in when i am trying to publish my website in Muse
it just sits here and never logs in-normally it takes less than a second.
-
I cannot locate the navigation tab in the insert panel.
Part 2 of the turtorial instructs to " cick on Navigation in the insert panel" I don't see it there.
-
How to compress the PDF file?
Whenever I use Designer to design my forms, the size is almost always bigger than converting from MS Word and use Acrobat to make the form. Is there a way to compress the form so the size is not too big? If so, what are the steps?
-
Does anyone has a solution for this problem? Since I updated to iOS 6 sometimes my keywords did not work. I always have to restart my iPhone to have it work. It's ridiculous to always restart my phone. If you also have this problem you can repost + g
-
Shared Accounts Showing Up On My Computer...
Shared accounts are showing up and going away randomly while I'm on iTunes (I have not set up any shared accounts on my computer). I can listen to some of the songs,; however, some tell me I need a password to listen. It will not let me move the song