Yellow exclamation mark in references: What does it mean

In my c# project, i have references to c++/cli and native c++ projects under "references". (i need to have them there, in order to be able to use msbuild on my solution from the command line.). all of these projects have yellow exclamation marks overlayed
to the "reference" symbol. (vs 2010). i can't find any explanation what these symbols are supposed to tell me.
any ideas ?
WM_THX
-thomas woelfer
http://www.die.de/blog

Hi Thomas,
I think this behavior is a warning to user that the native dll referenced by C# project is not supported there.
And I cannot say if it is by design or just a bug, would you mind sharing the connect link here, so that others could see and vote on it?
In addition, for msbuild issue, you may try MSbuild forum for better suggestions/workaround.
Thanks for understanding.
Figo Fei
MSDN Subscriber Support
in Forum
If you have any feedback on our support, please contact
[email protected] 
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Similar Messages

  • TS2094 After resetting the pram, the screen only shows a folder with a question mark inside.  What does this mean?

    I followed the initial steps in this post and reset pram.  After restarting, the screen just shows a folder with a question mark.  What does this mean?

    Thanks Niel, I tried using Option and nothing happened so I next tried inserting the Leopard disc and rebooting while holding C.  Nothing happened until the disc was ejected and then the folder with question mark reappeared.  I inserted the disc again and at this point and it booted OSX.  I tried to acess disc utility to repair but my harddrive wasn't listed, only the CD drive and the OS disc.  Does this mean I'm lost everything?

  • I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

    I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message.  It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
    Kris

    It means your file is too large to fit on a single layer disk.
    Recompress to keep the overall size (audio,video and menus) below 4.5GB
    x

  • When I turn on my computer, I get a grey screen with a blinking file with a question mark inside. What does this mean?

    Powering Up!!!!

    Tell us more about your machine.
    What year, model and what OS it had running before it failed.

  • Yellow exclamation mark--what does it mean?

    Hello Aperture experts: I've just started using Aperture and am designing a book. Certain images I've chosen are posted on the layout page with a yellow exclamation mark in the corner. I get it that Aperture is trying to warn me about something, but what? Does anyone know? Thanks.

    What are the pixel dimensions of the photo and what is the size you are printing it?
    Depending on your personal quality expectations you may find that if you are close you will be ok - i often print photos with the warning knowing that it is my risk
    Basically you should have at least 180 dpi to avoid a warning - so a full page 8.5 x 11 print requires a photos of 1530 x 1980 or larger - and remember that if you zoom the photo that reduces the dpi
    LN

  • When I bring a song into iTunes next to the number there is what looks like an exclamation mark ! - WHAT DOES THAT MEAN?

    When I bring a song into iTunes next to the number there is what looks like an exclamation mark ! - WHAT DOES THAT MEAN?
    For example, 1 ! Without You
    I can't load it onto my ipod - I never saw that before.

    I found my answer - thanks

  • I have a exclamation red mark next to my inbox for my email. What does that mean. This is on my iPad.

    I Have a exclamation red mark next to my inbox. what does that mean? This is on my ipad

    It means that one of your messages has been unable to send. Tap on it and try resending when it goes the mark should go away

  • IMovie Yellow Exclamation Mark - What's missing?

    I have movies that I updated from iMovie 09. When loading the Project, in the Timeline, I see the title in the middle with a yellow exclamation mark. I'm not sure why this is there. I initially had music missing with red and some files missing for some Projects, but I fixed everything. It still shows the yellow exclamation mark. When I hover over it, nothing happens. I have an image of what it looks like. What am I missing from the Project?

    Hi,
    @Edwin
    thanks for pointing me in the right direction Edwin. The problem was that I changed the name of the method after the def-file for the method has been created the first time. JDEV did not update the contents of this file (and/or the DataBindings.cpx). So the method name was wrong and I got errors running my test app.
    I removed the task flow completely and set up a new one which is working as expected.
    @Juan
    for me it looked like I couldn't call the method defined as default action. I got errors (which I didn't read carefully) stating the the method was missing (something like ...#[bindings....} not found). My conclusion was that the exclamation mark in the diagram stating that bindings is unknown was the cause.
    The real cause of the problem I described above.
    Thanks
    Timo

  • App Catalog ERROR "The action could not be completed. Try again later" Yellow exclamation mark

    Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
    I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
    I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
    So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log 
    with Description to [email protected]
    Reference number for chat: Chat session ID number 89786521
    Do you have any solution?
    Best regards
    Rufat Jalilov
    Post relates to: Pre 2 p102una (Unlocked NA)

    Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
    I really appreciate the attention rendered by the support services, I just need that everything works fine.
    I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
    I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
    So, I will wait for a few days, will see what's happening.
    Best regards
    Rufat Jalilov

  • Ibook suddenly marks photos with yellow exclamation mark

    Hi,
    I have created several photo albums and had them published. I have always chosen my photos carefully to avoid the yellow exclamation mark. One of my projects was started several months ago and left untouched for a long time. When I went back to the project more than 50% of the photos were now marked with exclamation marks. Then I looked at books that I have finished and had published, and they too have exclamation marks on some photos. I went to a local Apple Store and the "geniuses" were stumped. Any ideas on what may have caused this spontaneous mutation...and how I can fix it?
    Thanks
    PS Changing the size of the book project does not seem to make a difference

    Hi Maliha,
     I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
     That was a wonderful feeling to be able to fix  this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help.

  • I am missing masters in aperture , getting an yellow  exclamation mark , but still getting a preview of those pics .how to create a master .i have done rebuilding , repair , but still same?..please help

    missing masters in aperture , getting an yellow  exclamation mark ,

    Q: Is there a way to place an image at 100% without having to do that extra resizing step?
    I think here you want your images to fit in the full page size frame automatically. For this you can try the follwoing steps:
    1. Create a new doc
    2. Goto Object menu and choose Frame fitting options
    3. Select Autofit and from Fitting drowdown, select "Fit content to frame". Refer the screenshot below:
    After this you images should automatically fit in the entire page placeholder frames. Please let me know if this does not work or if the problem you are facing is different and I did not understand your problem correctly.
    Regards,
    Pooja

  • Yellow exclamation mark

    Yesterday when opening pictures in Camera raw a yellow exclamation mark started appearing on the upper right corner. This doesn't let me use Adjustment brush as the yellow exclamation mark appears every time I pick the brush and start using it on the picture. It's been like that for two days now.  Any ideas?

    I did try doing the ‘Purge Cache' now, but it's still the same.
    With Ctrl +K you get the normal cache for preview and thumbs and that is not the same as the Camera Raw Cache.
    Under the menu Bridge you will find just above the bridge Preferences the Camera Raw Preferences (at least, on a Mac) and in this window you find the option to clear the Camera Raw Cache, did you try that one?

  • ITunesHelper Login Item - Yellow Exclamation Mark

    Hey people!
    I was checking my login items and saw that next to the iTunesHelper there was a yellow exclamation mark... It said that "this item could not be found"... I upgraded my OS to Mountain Lion and it is a bit slow.. You think this could be a contributing factor?

    It's old. Remove it.
    If you go into you iTunes settings, the checkbox to have it open iTunes when you attach a phone or ipad is what causes it to be placed in the login items.
    Not likely.

  • Wireless network adapter - yellow exclamation mark triangle

    Hello, My wireless internet button is orange and isn't and doesn't change colour when I press it so wifi isn't working. In network adapters, my wireless adapter shows up and is: Ralink RT5390R 802.11bgn Wi-Fi Adapter  It has a yellow exclamation mark triangle on it. It says it is enabled, but in device status it says: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (code 39){Unable to load device driver}%hs device driver could not be loaded.Error status was 0x%x When I try to update driver software, it says the best driver software is already installed and up to date. Please help me get my wifi back -  I have a HP pavilion g6 2210sa, Product number C6S45EA#ABU and running Windows 8. Best wishes and thank you in advance.

    I have HP 15-r264dx windows 8.1 64 bit laptop with Realtek wireless adapter RTL8188ee 802.11 bgn. There is an exclamation mark with the wireless signal which is white. Sometimes my wireless cannot connect. My wired LAN is OK. I unchecked the option to make adapters power off to save power I think in power management. I have a 2015 driver for the wireless adapter. HP diagnosis would reset the adapter and everything is fine but still the white exclamation mark. I think a setting is not correct, any ideas what it may be and how do I go to it? I am connected with the wireless lan right now to my Verizon DSL router and it is unsecured.

  • What does it mean when i have a flashing folder with a question mark in it when i try to boot up?

    what does it mean when I have a flashing folder with a question mark in the middle of it when I try to boot the interface?

    It means the system cannot find a bootable OS. Reinstall OS X.
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Maybe you are looking for