Yellow LED: Channel started but inactive from CC monitoring

Hi
We are trying SOAP to SOAP scenario, we done with all IR and ID part deployment and Activated the all the Objects ,
But still In CC monitoring both channels showing Yellow LED: Channel started but inactive
In omponent Monitoring Adapter Engine also showing Yellow LED
We tried with SXI_CACHE and CAP cache refresh also...
Help me out to solving this issue..
Thanks
Vadde

Hi Vishwanadh,
We have faced the same issue for the past two days and the sam has got resolved automatically while testing the scenario. So please go ahead with your testing, the channel will then be activated automatically.
Before that clear the CPAcache with the user PIISUSER (make sure that the user is having access to SAP_XI_Administrator_J2EE and SAP_XI_Configuratoe_J2EE
Regards,
Varadhu

Similar Messages

"Channel started but inactive" in RWB Monitor for SOAP sender channel

Dear XI specialists,
I have configured a communication scenario involving SOAP Adapter (sender) usage, but I'm facing the issue when testing the scenario. The problem is that none of messages are coming into the SOAP Adapter (checked via TCode SXI_MONITOR in XI) when using 3rd party SOAP-clients (XML Spy, soapUI) based on WSDL-file generated and exported from XI.
I checked the sender communication channel for SOAP Adapter - it is activated in Integration Builder's Directory. SOAP Adapter itself is also started.
I checked Runtime Workbench monitors and in the Communication Channels Monitor of the Components Monitor received the warning saying "Channel started but inactive" for my configured channel as well as for other channels working on SOAP Adapter.
Activities which were performed (in the order in which they were performed and results tested):
1. the configuration channel restart;
2. the communication channel re-activation and further re-start;
3. SOAP Adapter restart;
4. XI system's Java instance restart.
All mentioned activities didn't give any positive effect in part of this issue resolution.
On the other hand, if I use test message functionality of the Runtime Workbench (Component Monitor), then messages are seen in SXI_MONITOR and expected response messages are also returned to XI from integrated business system.
Would you please advise what can be checked else here and where the root of the problem may be detected?
All your answers and feedback will be greatly appreciated and awarded accordingly.
Many thanks in advance and my regards,
Vadim

Dear all,
Thank you for your input! Unfortunately, the problem still exists after testings and checkings which you suggested.
TO Seshagiri:
I checked message monitor and found only several messages for the required sender/receiver services pair in the used namespace - all of them were successfully processed (these are messages which I sent by means of RWB Component Monitor's test message functionality).
TO Sarvesh:
Yes, sender agreement is configured properly. I configured it when configuring communication scenario in the Configuration Wizard and then manually re-checked its definition. Moreover, when performing Test Configuration in ID, I received positive results.
TO Nallam Guna:
I cleared Data Cache in Integration Builder, but this didn't help.
TO Gujjeti:
I'm on SAP NetWeaver 2004s PI 7.0. Service Pack level for PI is 13.
TO Durga:
Thank you for provided links! I have already had a look at them - but proposed solutions doesn't seem to be working in my situation.
Thank you all once again for your prompt answers! I really appreciate your attempts in helping me!
I would appreciate if you could share any further ideas on this issue.
My best regards,
Vadim

SOAP Adapter status stay "Channel started but inactive"

Hi, Folks:
We have a couple of SOAP adapters that I have not used for a while, so I put them in inactive status.
Now we need to switch SOAP Scenario, I activate them, however, in Communication Monitoring Page, The status is Yellow Triangle: "Channel started but inactive"
I have tried to inactivate and reactivate them for a couple of times, it does not help.
Any ideas are welcomed !
Liang

Hi Guys
As suggested by you guys, after I sent first message, all the SOAP adapter get active now. I believe I fogort how I setup it up initially. That is the value stay with your guy
Thanks everyone !
Liang
Edited by: Liang Ji on Feb 29, 2008 8:48 PM

SOAP adapter - Channel started but inactive (case inside)

Good day everyone!
I have integration scenario IDOC->XI->SOAP. I did all setting and created SOAP adapter with 2 parametrs: "Target URL" and "SOAP Action".
But when I look at Channel Monitoring I see my SOAP-channel with status "Channel started but inactive" ??
What could it be?
Thanks in advance!

hi,
this issue is too common. i face it i some of my channels. there no error.
test your scenario. im sure it will work but the adapter still has been in yellow at least it fails and turn red.
I have some CC in red status and working fine. later few minutes it turn green.
don worry about it. if you leave it working it will turn green later. if u restart the java stack you can solve it but i dont recommend it because this error could appear in other adaprter too.
commonly it appear when you start and stop the channel from RWB.
Hope Helps
thanks
Rodrigo.

SOAP - channel started but inactive

Hi experts..
while testing Scenario using SOAP adapter. in RWB -
> adpapter monitaring . here all the adapters in gery status , when i check in communicational chanel monitaring iam seeing error "channel started but inactive "
but i cheked all adapeters in IR ID and refreshed the cashes, and tested the proxy also evrthing is ok.
even i run the scenarion why the adpter status is not changed from yello to green?
i chek the notes 809420, 764176 but i didnt understand what is causing this issue?
note : previously all the scenarios are implemeted in SP6 , now iam working on SP16 , iam wondering in my current system all the adapters in grey color even othe scenarios excuted sucessfully also.
please suggest me ?
thanks
vasavi

Hi sheshagiri
i run the proxy iam able to see the below error in
outbound processing----
> payload after service
ADDRESSVALIDATERESPONSE>
- <RESPONSE>
- <TRANSACTIONREFERENCE>
<CUSTOMERCONTEXT>Local mode using Progistics XML Processor</CUSTOMERCONTEXT>
<XPCIVERSION>6.1.9</XPCIVERSION>
</TRANSACTIONREFERENCE>
<RESPONSESTATUSCODE>609</RESPONSESTATUSCODE>
<RESPONSESTATUSDESCRIPTION>Unable to process request</RESPONSESTATUSDESCRIPTION>
- <RESPONSEERROR>
<ERRORSEVERITY>Fatal</ERRORSEVERITY>
<ERRORCODE>2441</ERRORCODE>
<ERRORDESCRIPTION>Invalid Login ID. Verify Login ID with System Administrator. I7A9</ERRORDESCRIPTION>
<MINIMUMRETRYSECONDS>N/A</MINIMUMRETRYSECONDS>
- <ERRORLOCATION>
<ERRORLOCATIONELEMENTNAME>LOGINID/FOLDER</ERRORLOCATIONELEMENTNAME>
<ERRORLOCATIONELEMENTREFERENCE>n/a</ERRORLOCATIONELEMENTREFERENCE>
<ERRORLOCATIONATTRIBUTENAME>N/A</ERRORLOCATIONATTRIBUTENAME>
</ERRORLOCATION>
<ERRORDIGEST>N/A</ERRORDIGEST>
</RESPONSEERROR>
</RESPONSE>
</ADDRESSVALIDATERESPONSE>
please suggest me

"Channel started but Inactive" - Issue with JDBC channels

Hi all,
I have 5 channels configured with Oracle which were functioning till yesterday night properly. All of a sudden 3 out of them have decided not to co-operate and they show a status in RWB as "Channel started but Inactive".
The rest two are functioning correctly which is more weird.
I did the following:
1. Complete cache refresh.
2. Delta cache refresh
3. channel was copied with a new name and used and it works but this doesnt make any sense.There has to be a proper way to deal with this situation.
4. All channels are activated in ID.
Has anybody faced similar issues with JDBC or any other type channels?
Regards,
Amol Joshi

Hi Amol,
Usually the channel information is available in the monitor after the service and the channel are activated successfully.
However, in the case of the SOAP adapter, the
adapter status is not available until the first request is sent to the adapter.
For JDBC Adapter try to:
1. Re-configure JDBC parameters, it might happened that it is not able to establish a database connection.
Just re-enter and activate the same.
2.goto to the IR adn ID and run the cache ,you will get the cache objects list in red color check the error details there, make sure the AE cache is up and running fine.
goto to the RWB>cache monitoring or status->check the cache status of the AE and IS, it should be green in color,
run the CPA cache from the URL with the PIDIRUSER ...then again run the cache from IR and ID and check.
Also check :
1.if you have right permission to write the data to the table
2. Check whether that table takes NULL values, if so check what data is being supplied by XI to the receiver end.
*Pls: Reward points if helpful*
Regards,
Jyoti

What happens if Channel started but inactive?

Hi.
While monitoring the training server, i found there are 100 channels with yellow color status "Channel started but inactive".
All these channels are not SOAP or MAIL channels. Most are FILE, JDBC, JMS channels.
I know that we can stop the channels in RWB but what happens if these channels are kept with that yellow status? If i stop these channels will it improve the performance??
Kindly let me know how it will effect the performance.
Thanks... !
Warm regards,
Praveen.

Hi,
While monitoring the training server, i found there are 100 channels with yellow color status "Channel started but inactive". - It means there was no msg for these channels so they are inactive......when there will be msgs for these channels, then those msgs will be processed by these channels and its status will change to running........
I know that we can stop the channels in RWB but what happens if these channels are kept with that yellow status? - No performance impact because of this inactive channels :).............
If i stop these channels will it improve the performance?? - Do not stop these channels but keep them started..........
Regards,
Rajeev Gupta

Channel Started but inactive

hi all -
i have 2 scenarios - idoc to file which works fine without any problem
in the other scenario - file to file i get this message in the communication channel monitoring for the file sender which says "Channel started but inactive".
I checked the integration directory and made sure that its activ and the change list is activated.
I also checked the sxi_cache and the contents are upto date.
any ideas how to resolve this issue?
Thanks,
Tirumal

Hi,
Try to do the CPACache Refresh.
Also adapter metadata Refresh ( Integration Builder->Admin->Cache Overview)
Also restarting Adapter engine may also help here.
This SAP Note - 764176 (SLD inconsistence )
Regards,
Moorthy

SOAP Adapter: Channel started but inactive

Our system is XI 3.0 running on Solaris 10 zoning and Oracle 9i. All on Support Package 17.
When consulting the status of the adapter in the RWB environment we are receiving the message above "Channel started but inactive".
How can We solve this problem?

hi,
SOAP adater will be green when you process the first message via this adapter
Regards,
michal

RWB issue Channel started but inactive

Hi,
In RWB the SOAP adapter is showing status message as"Channel started but inactive" but all the SOAP adapters are active in Directory.
This is happening only in new environment Pre-Production.
Valueable inputs will be appreciated.
Thanks
Santosh

Hi Santosh,
SOAP adapter shows "Channel started but inactive" message when there are no messages processed till now(after activating any changes to comm channel or server is restarted). Once a message is triggered in SOAP adapter, this will go away. Try to trigger a message and see.
Regards,
Sreenivas

SOAP Sender - RWB "Channel started but inactive"

I have a sender soap channel configured. In Integration Directory the Adapter Status is active. However when I go to Runtime Workbench and view the channel it says the "Channel is started but inactive". Can someone explain to me why it is not active in Runtime Workbench?
Also, SOAP messages sent to this channel are failing obviously because the channel is inactive. How can I make this channel active so that XI can receive SOAP requests.

hi rodel,
You have to process one message at least to make SOAP adapter Active
refer this discussion
how can i enable SOAP Adapter?
regards
Ramesh P

Reporting communication channel errors in emails from alert monitoring

Does anybody know how to capture the error message reported on the communication channel and send it in the dynamic text of the email configured for alert monitoring?
I get the mapping error messages but all other message container element values seem to be blank.
None of the container elements (standard) defined seem to have the channel error message. in PI 7.0
Thx

Hi,
You can get all the alerts that were captured by the adapter monitoring i.e, communicaiton channel errors etc.
we can also trigger similar alerts for Adapter also when any adapter truns in to RED.
in RWB->Alert configuration-> choose adapter engine errors also then you will get alerts for adapter failure also.
If you need create alerts for each communication channel. in RWB->Alert montoring->Adapter type-> instead of giving * select indival commnication channel
for this you need to have alter configured for each Commnication channel in Alrtcatdef and RWB. so for each in RWB you select corerspoding communication channel.
You can monitor the sender and receiver service in CCMS, but I don't think you can monitor the commuication channels.
http://help.sap.com/saphelp_nw04/helpdata/en/45/e32b64f87c6f74e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
Thanks
Swarup

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

HT1338 unable to delete photos from trash file Why it starts but will not not finished task

can not delete from trash bin on iphoto will start but not finish WHY

Press and hold the Option key then select Empty Trash.
If that does not work try solving Trash problems.

Yellow LED: Channel started but inactive from CC monitoring

Similar Messages

Maybe you are looking for