Yellow rectangle when using tab

Is there a way to remove the yellow rectangle that appears on objects when the Tab key is pressed. This mostly applies to MovieClips that are Simple Buttons.
THANKS

THAT IS PERFECT!!!!
THANK YOU!!!!
Once again you come through for me kglad. Thank you for responding!!!

Similar Messages

When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?

When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?

it's just another View for your tabs which needs less *space* in the taskbar, but same *memory* of your computer.
exception: if you (re)start FF and restore the last session (with lots of tabs/groups) there is an option in FF-Settings to load the (content of the) tabs only as soon as they are clicked, and not as soon as FF starts. That trick saves memory.

When using tabbed browsing, if I click to open a new tab, why will it not automatically load my homepage in the new tab instead of a blank window?

I use tabbed browsing with the tab bar visible at all times so I can click on a new tab when convenient.Why can my homepage not load automatically on that newly opened tab insted of a blank screen with a search bar saying "you've opened a new tab".........well yeah. I have looked through the options and cannot find anything to open a new tab with the homepage. Is it possible? Have I missed it? If it's not possible, could you make it so?
== This happened ==
Every time Firefox opened
== I opened a new tab.....see above

The default is to load a blank page.
Try one of these add-ons:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777

How to change gtk theme dialog box button appearance when using tab?

Hi,
I'm using candido as my gtk theme and have noticed that when a dialog box pops up (Yes / No), it is extremely difficult to tell which option is highlighted. How do I change this appearance? I searched through the gtkrc and even used gimp to manipulate the images used via trial and error to see if I found one that worked. Can someone familiar with gtk themes tell me which gtkrc or image to alter to affect this appearance?
I use tab to select my option a ton and hate not being able to tell what I'm looking at.
For reference,
- here is the current look (can you tell which one is highlighted? It's "Cancel" -- just slightly bigger or a fine line around it) LINK
- here is the gtkrc if that helps? LINK
For one more point of clarification, I'm not talking about the button appearance on mouseover. I have identified that the button-prelight.png file changes that. I specifically am talking purely about a dialog popping up and then using the tab key alone to highlight through the options. I really like this theme, but this one thing drives me crazy. This appearance changes when I select different themes with lxappearance, so I've narrowed it down to being a gtk-theme issue, not my openbox theme or icon set.
Many thanks!
Last edited by jwhendy (2011-02-02 18:11:10)

HI,
Debug the program after you press the CANCEL button , you will get where the conrol is flowing , And instead of using
Leave to screen '910' use Leave to screen 0.
Regards,
Madhukar Shetty

How to stop a while loop when using tab control

How do you use a tab contol to stop what is happening on one tab when you switch to another tab? In the test example I attached, I have a while loop nested inside a case structure controlled by the tab control. When I tab to page two the elapsed timer starts but when I switch to another tab it does not stop. I can't come up with an easy way to stop or exit the while loop when I change tabs.
Thank you
Danny
Attachments:
tab control.vi ‏24 KB

I played with it a little more and came up with this fix. This fixes it but is not tied to the changing tabs as I was looking for. Is this just too many nested loops and a bad idea?
Danny
Attachments:
tab control fix maybe.vi ‏26 KB

Bug when using Tab Images

Hi
I'm trying to use Tab Images in APEX 4.0.1, but have hit a couple of bugs.
Firstly, I'm using the substitution string #TAB_IMAGE# in the page template. This is described in the help as "Image File Name", however this is replaced with the full image tag. I believe the help text is very misleading in this instance.
Secondly, and this is by far the bigger problem, the img tag that replaces #TAB_IMAGE# has the image prefix hard coded into the src! So if the Current Tab Image for my tab is set to http://www.example.com/images/tab1.png then the source for the image in my case is /i/http://www.example.com/images/tab1.png which is incorrect.
This means that images for tabs MUST always be in the directory referenced by the #IMAGE_PREFIX# substitution string.
Am I missing something here? Is there a workaround? Currently we are unable to use Tab Images due to this.
Many thanks
Sara

Hello Sara,
The behavior you are describing is a long time known issue. It is a bug that should have been resolved by now, but for some reason was not. Maybe it’s because none of the default (built-in) page templates is using images with TABs.
The workaround is to create your own img tag in the appropriate page template section, using the #TAB_NAME# substitution string. The principle is to name your corresponding images like current_#TAB_NAME#.gif and non_current_#TAB_NAME#.gif, where the #TAB_NAME# part in the file name is replaced with the actual tab name. So, for a TAB called EMP, you’ll have two image files by the names current_EMP.gif and non_current_EMP.gif.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Problem creating a new row when using tabbed regions

I am new to JHeadstart and ADF and have been using the evaluation version of JHeadstart (in JDev 11.1.1.3) to judge its efficacy for a new significantly-sized application. As part of that evaluation I have created a small application (you can do this with HR schema using say the Departments table) with a single entity and VO. On JHeadstart I have then placed some of the fields into multiple Item regions within a Tabbed region on the same page and below the Group (layout style Table, Table Overflow Style below With Splitter). Existing rows display fine and I can view the data on the separate tabs.
However, if I try to create a row, I can fill in the data on the main region, but if I fill in data on the first tabbed region I cannot switch to the next tab without an error being generated.
e.g. using Departments - fill in DepartmentId and DepartmentName on main region, fill in ManagerId on first tabbed region and try to switch to second tabbed region to fill in LocationId:
Missing mandatory attributes for a row with key null of type HRModule.DepartmentsView1
Attribute DepartmentId in HRModule.DepartmentsView1 is required.
Attribute DepartmentName in HRModule.DepartmentsView1 is required.
If you save, then you can navigate.
You can also demonstrate something similar (different error message but probably the same root cause) on the myJHSTutorial demo. If you navigate to an employee off the regions page and try and create a new employee (using the '+' button below the 'Employees' label), then the tabs are not refreshed and any attempt to change the tabs results in an error
Failed to validate a row with key oracle.jbo.Key[999 ] in HRModule.EmployeesView3
Attribute Salary in HRModule.EmployeesView3 is required.
Salary must be between 6000 and 12000 for this job.
The JHS devguide does not help. Any thoughts? I can send the HR sample if you wish.

OK, I was able to reproduce this. The problem is that when you switch tabs, a partial page request is send to the server which does not include the items filled in the table row itself, hence these items are not updated in the underlying view object row.
Solution is to have a partial trigger at the table or group level listening to tab events. We will add that to the next release, but you can also apply the fix yourself by adding the following lines to the stackedRegionContainer.vm template:
#if (${JHS.current.pageComponent.tableLayout} && !(${JHS.current.pageComponent.hasOverflowInline}))
## when creating a new row in a table, and using overflow right/below, when switching overflow tabs
## the items filled in the table itself must also be processed as part of JSF model update phase, to
## prevent required item error when clicking another tab in overflow area
## we can enforce this by making the whole group listen to tab events
#ADD_CUR_GROUP_PARTIAL_TRIGGER("#REGION_ID()Tabs")
#end
Add these lines just before the line starting with
<af:${elemName}
Steven Davelaar,
JHeadstart team.

How to determine the positioning order when using tab key?

Hallo,
in my jspx-page i want to define the order which the cursor jumps when the user is using the tab key.
i don't know how to? in html there i can use tabindex. which way i must go?
Any help is appreciated.

I found that tabindex is not applicable. But i think it is an important point for better handling.
Is there no easy way to do it?

How to kill the yellow outline when using setFocus?

Hi...
I tried using:
btnname._focusrect = false;
It did kill the yellow outline but then I can't navigate using the up/down/right/left key anymore. How to solve this problem? I have been researching days on this.
Please help!
Thks!

Hi Kartik,
I tried:
_root._focusrect = false;
It did remove the outline but I could not navigate using the arrow keys anymore, I can only "tab" through the buttons. I need to use the arrow keys as this is for a presentation using a remote control.
As for:
_global._focusrect = false;
It didn't work.
I still don't understand why removing the yellow outline also means removing the arrows functions?...mmmm
Thks...

When using tab, automatically opening Home page

When I open a new Tab, it directs me to a blank page. I would rather that it would open to my home page. I know that there is something out there to make it so. But I am at wits end.

A blank page on a new tab is the Firefox default.
Install the following add-on: https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
After installation and restarting Firefox:
#click Add-ons > Extensions
#scroll down to NewTab URL and click Options
#click on "Home Page" to select it '''''OR''''' click on "URL" to select it and enter the address of the page you want to open when you open a new tab
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]

Highlight appears over rewind button when using Tab key

I am using Captivate 4 and publishing with Actionscript 3. When the user enters text, they can use the tab key as a shortcut key to move to the next field. However, when they use the tab key, a highlight appears over the rewind key in the control bar. I have tried the no_yellow_tab widget and that did not work with captivate 4/actionscript 3. I also tried adding so.addParam("seamlesstabbing", "false"); to the html and this did nothing as well. Any ideas?
Thank you,
Claudia

Hi there
You might try inserting a Click Box object at the top of your timeline. Configure it to do nothing if clicked and so there is no visible indication.
I've seen it before where focus shifts instead to the hidden object and prevents it from reaching the playback controls. My thought is that after Tab is pressed, focus will then be placed on the hidden Click Box which, of course, the user will not see and will do nothing if they click.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Scanned Images Have Yellow Lines When Using the HP 2400 Scanner

I have a HP 2400 scanner. The scanner was working fine on Wednesday, Sept. 10. I tried to scan a photo (Jpeg) and a document (PDF) but there were yellow lines going through each item. I reconnected the scanner and attempted to rescan the photo and document. The yellow line still appeared. Please let me know what I can do to correct the problem.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Scanners.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

After installing iTunes 10.4.0.80 "file" "edit" etc items from menu bar at top right corner disappeared -when cursor is put in that spot a darker rectangle appears - similarly tabs for syncing iPhone are invisible

After installing iTunes 10.4.0.80 "file" "edit" etc items from menu bar at top right corner disappeared -when cursor is put in that spot a darker rectangle appears - similarly tabs for syncing iPhone are invisible- and similarly small ovals appear when cursor is placed where tabs should be.

Very many thanks to you, Putaro! Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
If you've got Jax installed, consider removing it before updating to iTunes 10.4.
My iTunes is now working right as rain, thanks again to Putaro!
-Jon

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a

I have been noticing that when using the computer the mouse keeps going in places where I really do not want and just now select the sentence without I have done anything. Sometimes goes to places like bookmark or open tabs in website when I am reading a page.
Also I have noticed opened windows that I have not opened.
I have verified the sharing folder and also the remote access but it not let me turn it off.
Also I have add a password to my computer and even using the same one it looks like is not working.
The I photo stopped working, Mac Mail does not let me add rules (this is from one day to the other)
The computer is mine, the internet I use is payed by me with a password. I did not give permission to anyone to use my computer or share my files.
In system preferences in the sharing folder is showing everyone and staff.
My computer is private I do not own a company and I do not have a network set up in my house.
I had my photos removed from my computer and even after trying to reinstall I photo and fix the Mac Mail is not working.
I am receiving emails saying that I have sent emails to people that I do not know and including in a time where I am working and not using the computer.
Any suggestions in how to fix this issue?
I really appreciate.

With the multitude of issues you have I would take it to an Apple store or AASP and have them sort it out. Then I would sign up for Apple camp or one on one.

Yellow rectangle when using tab

Similar Messages

Maybe you are looking for