Yellow screen on start up

yellow screen on start up

You are very welcome.
I hate having to replace computers, get attached to them, but having the geniuses check this one out will save a lot of frustration.  A couple of these past discussions went on and on and on until the person gave in and did what you have done.  If it is hardware there just isn't anything on-line help can do about it.  Good luck tomorrow and if you have a chance, post the results...we are all fellow users on here and like to hear the resolution to problems.

Similar Messages

  • Too many Yellow screens, too many emails - how to unsubscribe?

    I started following a yellow screen iPhone thread after getting my yellowscreen 4S direct from Apple - C39 serial
    Replacement No. 1, at Apple Store Covent Garden, also yellow, did not actually swap, although they messed up the paperwork to show I did.
    Replacement No. 2. at Apple Store Covent Garden, special order, 'store swap pack' took a week to arrive, also yellow C39 serial.
    Replacement No. 3. via applecare by UPS, 'swap packaging' courier was supposed to wait and collect original, didn;t wait, but just as yellow.C39 serial
    Replacement No. 4. again via Applecare - I think, by TNT, full retail pack, also yellow, Apple charged for a second phone DNP serial
    Replacement No. 5. again via Applecare - I think, by TNT again, full retail pack again, yellow again, Apple didn't have any record of this one until I told them.
    At this point Apple who had been previously utterly useless and unresponsive suddenly became very helpful, realising what a mess this all was.  Wanted me to give them one last chance, would arrange collection of all 3 yellowscreen iPhone 4Ss, refunds for both phones, and an appointment at Apple store Covent Garden to allow me to see the screen before purchase.
    In the event Apple store Covent Garden had no record of what my appointment was for. 
    It took just shy of an hour to open two iPhone 4Ss and find that both were yellow screen.  Both serials began DNP, and all their stock was either DNP or C39, this time the "Genius and Genius Manager were both very helpful, Genius could see the issue at once, Genius Manager was actually colour blind, so could appreciate the issue but not see it for himself - apologetic they could not meet expectation of 'the most amazing iPhone yet' having at least as good a screen as the 4. Welcome to the post Jobs erea I suspect.
    Replacement No. 6. at Apple Store Covent Garden, retail pack, yellow screen, serial beginning DNP
    Replacement No. 7. at Apple Store Covent Garden, retail pack, yellow screen, serial beginning DNP
    Give up on yellowscreen iPhone, revert to 3GS.
    All display phones at the Apple Store Covent Garden store were C37 serials - quelle surprise!
    On another subject, but the one of the title, I have been inundated with the stream of responses on the previous post I was subscribed to - about 500 not very happy iPhone users at the last count.  Each email that arrives tells me,"You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile."
    Well, I have, and set everything to 'off' but they just keep on arriving.  Does anyone know how to stem the flow.  I am very sorry for anyone suffering the insipid yellow screen of their 4S, but having decided to go back to my 3GS, I don't want to be updated five times a day..
    Thanks for any help
    Stephen

    I started following a yellow screen iPhone thread after getting my yellowscreen 4S direct from Apple - C39 serial
    Replacement No. 1, at Apple Store Covent Garden, also yellow, did not actually swap, although they messed up the paperwork to show I did.
    Replacement No. 2. at Apple Store Covent Garden, special order, 'store swap pack' took a week to arrive, also yellow C39 serial.
    Replacement No. 3. via applecare by UPS, 'swap packaging' courier was supposed to wait and collect original, didn;t wait, but just as yellow.C39 serial
    Replacement No. 4. again via Applecare - I think, by TNT, full retail pack, also yellow, Apple charged for a second phone DNP serial
    Replacement No. 5. again via Applecare - I think, by TNT again, full retail pack again, yellow again, Apple didn't have any record of this one until I told them.
    At this point Apple who had been previously utterly useless and unresponsive suddenly became very helpful, realising what a mess this all was.  Wanted me to give them one last chance, would arrange collection of all 3 yellowscreen iPhone 4Ss, refunds for both phones, and an appointment at Apple store Covent Garden to allow me to see the screen before purchase.
    In the event Apple store Covent Garden had no record of what my appointment was for. 
    It took just shy of an hour to open two iPhone 4Ss and find that both were yellow screen.  Both serials began DNP, and all their stock was either DNP or C39, this time the "Genius and Genius Manager were both very helpful, Genius could see the issue at once, Genius Manager was actually colour blind, so could appreciate the issue but not see it for himself - apologetic they could not meet expectation of 'the most amazing iPhone yet' having at least as good a screen as the 4. Welcome to the post Jobs erea I suspect.
    Replacement No. 6. at Apple Store Covent Garden, retail pack, yellow screen, serial beginning DNP
    Replacement No. 7. at Apple Store Covent Garden, retail pack, yellow screen, serial beginning DNP
    Give up on yellowscreen iPhone, revert to 3GS.
    All display phones at the Apple Store Covent Garden store were C37 serials - quelle surprise!
    On another subject, but the one of the title, I have been inundated with the stream of responses on the previous post I was subscribed to - about 500 not very happy iPhone users at the last count.  Each email that arrives tells me,"You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile."
    Well, I have, and set everything to 'off' but they just keep on arriving.  Does anyone know how to stem the flow.  I am very sorry for anyone suffering the insipid yellow screen of their 4S, but having decided to go back to my 3GS, I don't want to be updated five times a day..
    Thanks for any help
    Stephen

  • IOS yellow screen on boot

    Whenever my battery completely dies, and I put my device in the dock, it starts after a while, but it has a completely yellow screen.
    I have to manually hold power + home to restart it, and boot up while showing the apple logo. What could be causing this?

    Hi,
    I have exactly the same problem. Just installed iOS4 a few days ago (iPhone 3G).
    It happened twice since and it may be related to overheating issue while trying to recharge the battery.
    I waited 10 min for the iPhone to cool down (it was quite hot) and then tried to boot it with success.
    Al

  • HT201412 Ipad2 has blank blue screen. Itunes does pick it up but restore doesn't work. Flashes yellow screen wit hlogo then back to blue screen.

    Ipad 2 has blank blue screen. When turned off goes to black but when hold home/start buttons at same time, flashes on to blue screen. Itunes picks it up and have restored to no avail. Sometimes flashes yellow screen for few seconds with logo then back to blue screen. Have troubleshooted many times by restoring and plugging in/out with itunes but nothing works. Any other advice. It is only 14 months old so just out of warranty. Very frustrating that this expensive piece of well cared for equipment is so unstable and happens just as warranty ends.

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • Grey Screen at start-up - Troubleshoot harddrive and/or logic board?

    Hi everyone. Sorry for the lengthy post, but hopefully you can help me - I've spent a lot of time on the boards already, but hoped you could clarify some things.
    The problem is my Powerbook will not get past the grey screen at start-up. It will not boot off the 10.5 install disk and I can't eject the install disk to run the hardware test disk. Removing 3rd party ram, resetting PRAM, NVRAM, attempting to boot in 'safe' mode haven't helped. The harddrive is softly clicking/searching.
    So some questions:
    1) Is it possible that an interrupted time machine backup will bork the drive to the point where it wont boot? (See back-story below). I wouldn't have thought so, but prove me wrong.
    2) Should I be able to boot from the install disk if the harddrive is stuffed?
    3) If it is hardware, it's either the logic board or the drive. Is there any way to determine what it is (eg: is it possible to do a remote hardware test?)
    Edit: Just tried mounting the drive in target disk mode using an iBook, but it wouldn't mount. Powerbook displays a black screen.
    Oh, and I should point out that this is well out of warranty and any fixes would have to be cheap : ). Basically I need to determine if it's the drive or the logic board, preferably without having to buy and install a new drive when it may not be the problem.
    Any help or advice would be appreciated.
    Cheers
    - Ben
    Here's the back story if it's any help; recently upgraded to 10.5, created a base install disk image of all installed and registered apps (in the event that my drive failed). Copied data etc from the previous system over. It ran fine for a few days. This morning I ran time machine for the first time, left the computer for a while, came back and the screen was black (as if it was just displaying black, as opposed to off). Thinking it was just a display issue (which I've seen before), I put the system to sleep (power button, then 's'), woke it up again; still black. So I forced a shut down (wouldn't allow me to do a normal shut down, because dialogue boxes must have been preventing it) and on boot I got the grey screen.
    -------

    Hi Ben W. I don't have a good answer for you, but based on your information and what you've done, I think I would try starting the machine after disconnecting the harddrive. That requires taking the top off first, for which instructions are on ifixit.com.
    I can conjecture that a blown HD is preventing normal operation, perhaps sucking the power down, disrupting the optical drive, etc. This is purely conjecture, but costs you nothing but your time. If this turns out to be the case, I figure the optical drive should start responding again (hold C key during reboot, etc).

  • BLACK SCREEN on start up with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-power

    Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
    How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
    cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power. 
    I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
    and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
    about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine. 
    Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
    so I'm putting 2 together.
           Errors:
    I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
    I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
           Event Viewer events found:
    1. Kernel-Power, Summary page.
    There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
    "The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
    2. Kernel-Processor-Power - Event ID 37, task category (7)
    "The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
    3. LMS - HCMI - Event ID 2, Task Category: none
    "LMS Service cannot connect to HECI driver".
    I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
    driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
                 MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
    this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
    What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
    SYSTEM INFO:
    Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
    Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
    Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
    Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
    Please excuse the small text at the beginning, there isn't an option to un-do that error.

    You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
    RE-INSTALL WINDOWS 7 OS.
    SOLVED.
    DOESN'T BEEP ANY MORE.
    THAT IS A PART OF microsoft ISN'T IT.
    ::: EGO KILLER 9000 :::

  • Screen will start to pixelate and error message appears to restart

    I have a iMac G5 17". It will boot up, apple start up screen, Mac OS X screen, and then finally Desktop. but about 20 seconds the screen will start to pixelate and kinda "wig out" then it will tint a dark grey and a error message in multiple languages will appear saying " Push the power button to restart". at this moment the screen is completely frozen. all I can do it power it off.
    What could this be? Maybe a bad hard drive? Screen? Power source?

    Hi...
    Better to post your topic in the iMac G5 (PowerPC) community here >  iMac (PPC): Desktop Computers: Apple Support Communities
    This is the iMac (Intel) community.

  • My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

    My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

    Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
    Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
    other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
    You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
    Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
    I know you have a gripe, I get that all too well honestly .

  • I wanat to get rid of the firefox ads that appear on my screen at start-up, and remain there. I want to get rid of ads, not have more show up from firefox!

    I have been requesting help for this for the past HOUR. Firefox is placing ads on my screen at start-up (and they remain there) to get firefox on Android (I don't have a cell phone that uses it), and to go to the firefox site with information on how to use..........I have used firefox for years.........don't need this, and when I go there since it seems to be forced on me, read what is new, and try to close out...........it is back again when I open firefox again. If I keep getting ads from firefox, I will change to another browser!

    Firefox 4+ versions use a new build-in home page named <b>about:home</b> with a Google search bar on it (no internet access needed to load that page).<br />
    That about:home page only shows some snippets and has a button to restore the previous session if applicable.
    If you want a home page without the Restore Previous Session button and the snippets then set another page as the home page like www.google.com used in Firefox 3 versions.
    You may be seeing a similar ad on the Google site to install Google Chrome.<br />
    In that case use the close X on that ad to close that pop-up and it should stay away unless local storage gets cleared.

  • I'm getting the grey screen during start up and can't boot the computer. I did a cmnd R but worried it would automatically wipe my hard drive and reinstall OS.  Is there a risk at cmnd R will result in wiped HD without me actively making that choice?

    I'm getting the grey screen during start up and can't boot the computer - MacBook Pro with lion.
    I did a command r after doing some research but got nervous that it would automatically wipe my hard drive and reinstall OS.
    I was nervous because it asked me for language for software use before any options were presented (such as repair via disk utility). It looked similar to an OS install.So I powered off....Is there a risk at command r will result in wiped HD without me actively making that choice?

    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

    Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

    Apple service centre employee told me that they do not have this 14 day offer in India.
    And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
    I feeling ridiculously bad.

  • J2EE Server stays in Yellow status saying "Starting Apps"

    Dear Experts,
    In our BI system, the J2EE server SERVER0 is not coming to running state. After I stop and start the sap instance of the BI system it remains in yellow status showing starting apps. I could not find any error message in dev_server0, std_server0.out and server.0.log, please find below log of dev_server0
    dev_server0
    trc file: "F:\usr\sap\B23\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID6587850
    pid         : 1384
    system name : B23
    system nr.  : 00
    started at  : Thu Sep 18 12:42:53 2008
    arguments       :
           arg[00] : F:\usr\sap\B23\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
           arg[02] : -DSAPINFO=B23_00_server
           arg[03] : pf=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=4600
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=B23
           arg[08] : -DSAPMYNAME=bidq001_B23_00
           arg[09] : -DSAPPROFILE=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 2412] Thu Sep 18 12:42:53 2008
    [Thr 2412] *** WARNING => INFO: Unknown property [instance.box.number=B23DVEBMGS00bidq001] [jstartxx.c   841]
    [Thr 2412] *** WARNING => INFO: Unknown property [instance.en.host=bidq001] [jstartxx.c   841]
    [Thr 2412] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 2412] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : bidq001
    -> ms port    : 3901
    -> OS libs    : F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : bidq001
    -> ms port    : 3901
    -> os libs    : F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID6587800  : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID6587850  : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID6587800            : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID6587850            : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    [Thr 2412] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 2412] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 2752] JLaunchRequestFunc: Thread 2752 started as listener thread for np messages.
    [Thr 4064] WaitSyncSemThread: Thread 4064 started as semaphore monitor thread.
    [Thr 2412] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 2412] CPIC (version=700.2006.09.13)
    [Thr 2412] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_16-x64
    [Thr 2412] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\B23\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID6587850]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_16-x64
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\B23\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\B23\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 2412] JLaunchISetDebugMode: set debug mode [no]
    [Thr 3380] JLaunchIStartFunc: Thread 3380 started as Java VM thread.
    [Thr 3380] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
         Java Parameters: -Xss2m
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dsys.global.dir=F:\usr\sap\B23\SYS\global
    -> arg[ 24]: -Dapplication.home=F:\usr\sap\B23\DVEBMGS00\exe
    -> arg[ 25]: -Djava.class.path=F:\usr\sap\B23\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\B23\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 26]: -Djava.library.path=C:\j2sdk1.4.2_16-x64\jre\bin\server;C:\j2sdk1.4.2_16-x64\jre\bin;C:\j2sdk1.4.2_16-x64\bin;F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs;D:\oracle\B23\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\Dell\SysMgt\RAC5;C:\Program Files (x86)\Dell\SysMgt\oma\bin;C:\j2sdk1.4.2_16-x64\bin;F:\usr\sap\B23\SYS\exe\uc\NTAMD64
    -> arg[ 27]: -Dmemory.manager=1024M
    -> arg[ 28]: -Xmx1024M
    -> arg[ 29]: -Xms1024M
    -> arg[ 30]: -DLoadBalanceRestricted=no
    -> arg[ 31]: -Djstartup.mode=JCONTROL
    -> arg[ 32]: -Djstartup.ownProcessId=1384
    -> arg[ 33]: -Djstartup.ownHardwareId=Z1382384873
    -> arg[ 34]: -Djstartup.whoami=server
    -> arg[ 35]: -Djstartup.debuggable=no
    -> arg[ 36]: -Xss2m
    -> arg[ 37]: -DSAPINFO=B23_00_server
    -> arg[ 38]: -DSAPSTART=1
    -> arg[ 39]: -DCONNECT_PORT=4600
    -> arg[ 40]: -DSAPSYSTEM=00
    -> arg[ 41]: -DSAPSYSTEMNAME=B23
    -> arg[ 42]: -DSAPMYNAME=bidq001_B23_00
    -> arg[ 43]: -DSAPPROFILE=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
    -> arg[ 44]: -DFRFC_FALLBACK=ON
    -> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 46]: -DSAPSTARTUP=1
    -> arg[ 47]: -DSAPSYSTEM=00
    -> arg[ 48]: -DSAPSYSTEMNAME=B23
    -> arg[ 49]: -DSAPMYNAME=bidq001_B23_00
    -> arg[ 50]: -DSAPDBHOST=bidq001
    -> arg[ 51]: -Dj2ee.dbhost=bidq001
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 3380] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 2604] Thu Sep 18 12:42:58 2008
    [Thr 2604] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 2604] Thu Sep 18 12:43:07 2008
    [Thr 2604] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2604] JLaunchISetClusterId: set cluster id 6587850
    [Thr 2604] Thu Sep 18 12:43:08 2008
    [Thr 2604] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2604] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 5780] Thu Sep 18 12:43:48 2008
    [Thr 5780] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 5780] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
    [Thr 5780] Thu Sep 18 12:43:52 2008
    [Thr 5780] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
    [Thr 1764] Thu Sep 18 12:44:02 2008
    [Thr 1764] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 2604] Thu Sep 18 12:44:24 2008
    [Thr 2604] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 2752] Tue Sep 23 14:16:00 2008
    [Thr 2752] JLaunchRequestFunc: receive command:17, argument:0 from pid:5616
    [Thr 2752] JLaunchIShutdownInvoke: set shutdown interval (stop:1222159560/end:1222159680/TO:120)
    [Thr 2752] JLaunchProcessCommand: Invoke VM Shutdown
    [Thr 2752] JHVM_FrameworkShutdownDirect: invoke direct shutdown
    [Thr 6268] Tue Sep 23 14:16:20 2008
    [Thr 6268] JLaunchISetState: change state from [Starting applications (10)] to [Waiting for stop (4)]
    [Thr 6268] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
    trc file: "F:\usr\sap\B23\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
    node name   : ID6587850
    pid         : 4116
    system name : B23
    system nr.  : 00
    started at  : Tue Sep 23 14:18:06 2008
    arguments       :
           arg[00] : F:\usr\sap\B23\DVEBMGS00\exe\jlaunch.exe
           arg[01] : pf=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
           arg[02] : -DSAPINFO=B23_00_server
           arg[03] : pf=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
           arg[04] : -DSAPSTART=1
           arg[05] : -DCONNECT_PORT=4600
           arg[06] : -DSAPSYSTEM=00
           arg[07] : -DSAPSYSTEMNAME=B23
           arg[08] : -DSAPMYNAME=bidq001_B23_00
           arg[09] : -DSAPPROFILE=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
           arg[10] : -DFRFC_FALLBACK=ON
           arg[11] : -DFRFC_FALLBACK_HOST=localhost
    [Thr 5340] Tue Sep 23 14:18:06 2008
    [Thr 5340] *** WARNING => INFO: Unknown property [instance.box.number=B23DVEBMGS00bidq001] [jstartxx.c   841]
    [Thr 5340] *** WARNING => INFO: Unknown property [instance.en.host=bidq001] [jstartxx.c   841]
    [Thr 5340] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
    [Thr 5340] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : bidq001
    -> ms port    : 3901
    -> OS libs    : F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : bidq001
    -> ms port    : 3901
    -> os libs    : F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID6587800  : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID6587850  : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID6587800            : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID6587850            : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\instance.properties
    [Thr 5340] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5340] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 5460] JLaunchRequestFunc: Thread 5460 started as listener thread for np messages.
    [Thr 5580] WaitSyncSemThread: Thread 5580 started as semaphore monitor thread.
    [Thr 5340] Tue Sep 23 14:18:07 2008
    [Thr 5340] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5340] CPIC (version=700.2006.09.13)
    [Thr 5340] [Node: server0] java home is set by profile parameter
         Java Home: C:\j2sdk1.4.2_16-x64
    [Thr 5340] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\B23\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID6587850]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : C:\j2sdk1.4.2_16-x64
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\B23\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\B23\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\B23\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120000
    [Thr 5340] JLaunchISetDebugMode: set debug mode [no]
    [Thr 3176] JLaunchIStartFunc: Thread 3176 started as Java VM thread.
    [Thr 3176] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
         Java Parameters: -Xss2m
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dsys.global.dir=F:\usr\sap\B23\SYS\global
    -> arg[ 24]: -Dapplication.home=F:\usr\sap\B23\DVEBMGS00\exe
    -> arg[ 25]: -Djava.class.path=F:\usr\sap\B23\DVEBMGS00\exe\jstartup.jar;F:\usr\sap\B23\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 26]: -Djava.library.path=C:\j2sdk1.4.2_16-x64\jre\bin\server;C:\j2sdk1.4.2_16-x64\jre\bin;C:\j2sdk1.4.2_16-x64\bin;F:\usr\sap\B23\DVEBMGS00\j2ee\os_libs;D:\oracle\B23\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\Dell\SysMgt\RAC5;C:\Program Files (x86)\Dell\SysMgt\oma\bin;C:\j2sdk1.4.2_16-x64\bin;F:\usr\sap\B23\SYS\exe\uc\NTAMD64
    -> arg[ 27]: -Dmemory.manager=1024M
    -> arg[ 28]: -Xmx1024M
    -> arg[ 29]: -Xms1024M
    -> arg[ 30]: -DLoadBalanceRestricted=no
    -> arg[ 31]: -Djstartup.mode=JCONTROL
    -> arg[ 32]: -Djstartup.ownProcessId=4116
    -> arg[ 33]: -Djstartup.ownHardwareId=Z1382384873
    -> arg[ 34]: -Djstartup.whoami=server
    -> arg[ 35]: -Djstartup.debuggable=no
    -> arg[ 36]: -Xss2m
    -> arg[ 37]: -DSAPINFO=B23_00_server
    -> arg[ 38]: -DSAPSTART=1
    -> arg[ 39]: -DCONNECT_PORT=4600
    -> arg[ 40]: -DSAPSYSTEM=00
    -> arg[ 41]: -DSAPSYSTEMNAME=B23
    -> arg[ 42]: -DSAPMYNAME=bidq001_B23_00
    -> arg[ 43]: -DSAPPROFILE=F:\usr\sap\B23\SYS\profile\B23_DVEBMGS00_bidq001
    -> arg[ 44]: -DFRFC_FALLBACK=ON
    -> arg[ 45]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 46]: -DSAPSTARTUP=1
    -> arg[ 47]: -DSAPSYSTEM=00
    -> arg[ 48]: -DSAPSYSTEMNAME=B23
    -> arg[ 49]: -DSAPMYNAME=bidq001_B23_00
    -> arg[ 50]: -DSAPDBHOST=bidq001
    -> arg[ 51]: -Dj2ee.dbhost=bidq001
    Tue Sep 23 14:18:09 2008
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 3176] Tue Sep 23 14:18:10 2008
    [Thr 3176] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 6368] Tue Sep 23 14:18:26 2008
    [Thr 6368] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 6368] Tue Sep 23 14:18:35 2008
    [Thr 6368] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 6368] JLaunchISetClusterId: set cluster id 6587850
    [Thr 6368] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 6368] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6696] Tue Sep 23 14:19:11 2008
    [Thr 6696] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 6696] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
    [Thr 6696] Tue Sep 23 14:19:12 2008
    [Thr 6696] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
    [Thr 6376] Tue Sep 23 14:19:20 2008
    [Thr 6376] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 6368] Tue Sep 23 14:19:41 2008
    [Thr 6368] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 5460] Wed Sep 24 12:20:46 2008
    [Thr 5460] JLaunchRequestFunc: receive command:10, argument:0 from pid:5616
    [Thr 5460] JLaunchProcessCommand: caught dump stack trace
    Full thread dump Java HotSpot(TM) 64-Bit Server VM (1.4.2_16-b05 mixed mode):
    "SeedGenerator Thread" daemon prio=2 tid=0x00000000092d0900 nid=0x1b80 in Object.wait() [0x0000000072b7f000..0x0000000072b7fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590070> (a sun.security.provider.SeedGenerator$ThreadedSeedGenerator)
         at java.lang.Object.wait(Object.java:429)
         at sun.security.provider.SeedGenerator$ThreadedSeedGenerator.run(SeedGenerator.java:282)
         - locked <0x0000000015590070> (a sun.security.provider.SeedGenerator$ThreadedSeedGenerator)
         at java.lang.Thread.run(Thread.java:534)
    "DSR_Write_Rate_Monitor: bidq001.tvse.int_B23_6587850" prio=5 tid=0x000000006de58420 nid=0x1ac0 waiting on condition [0x000000007297f000..0x000000007297fb80]
         at java.lang.Thread.sleep(Native Method)
         at com.sap.engine.services.dsr.DSRComponentImpl0$SubmitRateMonitor.run(DSRComponentImpl0.java:1505)
    "Thread-35" prio=5 tid=0x000000006de58190 nid=0x5f0 in Object.wait() [0x000000007277f000..0x000000007277fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590198> (a com.sap.engine.services.shell.processor.ShellWrapper)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.services.shell.core.ServerShellProcessor.run(ServerShellProcessor.java:118)
         - locked <0x0000000015590198> (a com.sap.engine.services.shell.processor.ShellWrapper)
         at java.lang.Thread.run(Thread.java:534)
    "Thread-33" prio=10 tid=0x00000000092d2530 nid=0x1b6c waiting on condition [0x000000007257f000..0x000000007257fb80]
         at java.lang.Thread.sleep(Native Method)
         at com.sap.caf.mp.base.caching.MemoryCache$ValidationThread.run(MemoryCache.java:144)
    "Thread-32" daemon prio=10 tid=0x00000000092d1d80 nid=0x1b0c in Object.wait() [0x0000000071aff000..0x0000000071affb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590378> (a java.util.TaskQueue)
         at java.util.TimerThread.mainLoop(Timer.java:429)
         - locked <0x0000000015590378> (a java.util.TaskQueue)
         at java.util.TimerThread.run(Timer.java:382)
    "JCoRequestDispatcher" daemon prio=5 tid=0x00000000092d2010 nid=0x1b08 runnable [0x00000000720bf000..0x00000000720bfb80]
         at com.sap.mw.rfc.driver.CpicDriver.nativeSAP_CMLISTEN(Native Method)
         at com.sap.mw.rfc.driver.CpicDriver.SAP_CMLISTEN(CpicDriver.java:1126)
         at com.sap.mw.rfc.driver.RfcTypeRegisterCpic.waitForRequest(RfcTypeRegisterCpic.java:593)
         at com.sap.mw.rfc.api.RfcApi.RfcWaitForCpicRequest(RfcApi.java:1261)
         at com.sap.mw.jco.MiddlewareJRfc.waitForRequest(MiddlewareJRfc.java:580)
         at com.sap.mw.jco.RequestDispatcher$DispatcherWorker.run(RequestDispatcher.java:157)
         at java.lang.Thread.run(Thread.java:534)
    "SAPEngine_CCMSCommandConsumer_0" prio=10 tid=0x00000000092d1af0 nid=0x1a90 in Object.wait() [0x0000000071cff000..0x0000000071cffb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x00000000155904f8> (a java.lang.Object)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.concurrent.LinkedQueue.take(LinkedQueue.java:104)
         - locked <0x00000000155904f8> (a java.lang.Object)
         at com.sapmarkets.bam.jmxadapter.CCMSCommandConsumer.run(CCMSCommandConsumer.java:38)
         at java.lang.Thread.run(Thread.java:534)
    "SAPDSR_updater" prio=10 tid=0x00000000092d15d0 nid=0x1b88 waiting on condition [0x00000000718ff000..0x00000000718ffb80]
         at java.lang.Thread.sleep(Native Method)
         at com.sap.jdsr.writer.DsrPortUpdater.run(DsrPortUpdater.java:55)
    "SAPDSR_watcher" prio=10 tid=0x00000000092d1340 nid=0x1b78 runnable [0x00000000716ff000..0x00000000716ffb80]
         at java.net.PlainSocketImpl.socketAccept(Native Method)
         at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
         - locked <0x0000000015590700> (a java.net.PlainSocketImpl)
         at java.net.ServerSocket.implAccept(ServerSocket.java:448)
         at java.net.ServerSocket.accept(ServerSocket.java:419)
         at com.sap.jdsr.writer.DsrListener.run(DsrListener.java:748)
    "Thread-24" prio=10 tid=0x00000000092d0e20 nid=0x1b30 in Object.wait() [0x00000000714ff000..0x00000000714ffb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590cb8> (a com.sap.jmx.provider.ProviderConnectionTimer)
         at com.sap.jmx.provider.ProviderConnectionTimer.run(ProviderConnectionTimer.java:31)
         - locked <0x0000000015590cb8> (a com.sap.jmx.provider.ProviderConnectionTimer)
         at java.lang.Thread.run(Thread.java:534)
    "Thread-23" prio=10 tid=0x00000000092d10b0 nid=0x1ab4 in Object.wait() [0x00000000712ff000..0x00000000712ffb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590d50> (a com.sap.jmx.provider.LazyMBeanLoader)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.jmx.provider.LazyMBeanLoader.run(LazyMBeanLoader.java:133)
         - locked <0x0000000015590d50> (a com.sap.jmx.provider.LazyMBeanLoader)
         at java.lang.Thread.run(Thread.java:534)
    "_keystore_managed_system_thread_" prio=10 tid=0x00000000092d0b90 nid=0x1ab0 in Object.wait() [0x00000000710ff000..0x00000000710ffb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590e00> (a java.lang.Object)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.services.keystore.impl.security.SystemThreadWorker.run(SystemThreadWorker.java:56)
         - locked <0x0000000015590e00> (a java.lang.Object)
         at java.lang.Thread.run(Thread.java:534)
    "R3RoleDataSource_UpdateThread[114603123]" daemon prio=10 tid=0x00000000092d0670 nid=0x1af4 waiting on condition [0x0000000070eff000..0x0000000070effb80]
         at java.lang.Thread.sleep(Native Method)
         at com.sap.security.core.persistence.datasource.imp.R3RoleDataSource$1.run(R3RoleDataSource.java:661)
         at java.lang.Thread.run(Thread.java:534)
    "JarmCondense" daemon prio=10 tid=0x00000000092d03e0 nid=0x1af8 in Object.wait() [0x000000006cb7f000..0x000000006cb7fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015590f30> (a java.lang.Object)
         at com.sap.util.monitor.jarm.CondenseThread.threadShouldContinue(CondenseThread.java:217)
         - locked <0x0000000015590f30> (a java.lang.Object)
         at com.sap.util.monitor.jarm.CondenseThread.run(CondenseThread.java:196)
         at java.lang.Thread.run(Thread.java:534)
    "JCO.TimeoutChecker" daemon prio=10 tid=0x00000000092d0150 nid=0x1b60 in Object.wait() [0x000000006c80f000..0x000000006c80fb80]
         at java.lang.Object.wait(Native Method)
         at com.sap.mw.jco.JCO$PoolManager$TimeoutChecker.run(JCO.java:5672)
         - locked <0x0000000015590fd0> (a com.sap.mw.jco.util.ObjectList)
         at java.lang.Thread.run(Thread.java:534)
    "ConnectionSetCleaner Thread (UNMANAGED)." prio=10 tid=0x00000000092cf9a0 nid=0x1b8c in Object.wait() [0x000000006c60f000..0x000000006c60fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015591028> (a com.sap.engine.services.connector.jca.ConnectionHashSet$ConnectionSetCleaner)
         at com.sap.engine.services.connector.jca.ConnectionHashSet$ConnectionSetCleaner.run(ConnectionHashSet.java:682)
         - locked <0x0000000015591028> (a com.sap.engine.services.connector.jca.ConnectionHashSet$ConnectionSetCleaner)
    "SAPEngine_TREXRefreshCache_0" prio=10 tid=0x00000000092cf710 nid=0x196c waiting on condition [0x000000006a40f000..0x000000006a40fb80]
         at java.lang.Thread.sleep(Native Method)
         at com.sapportals.trex.util.cache.CacheFactory$RefreshThread.run(CacheFactory.java:522)
    "SAPEngine_System_Thread[impl:5]_87" prio=5 tid=0x00000000092cf480 nid=0x894 in Object.wait() [0x000000006a20f000..0x000000006a20fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_86" prio=5 tid=0x00000000092cf1f0 nid=0x68c in Object.wait() [0x000000006a00f000..0x000000006a00fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_85" prio=5 tid=0x00000000092cef60 nid=0x61c in Object.wait() [0x0000000069e0f000..0x0000000069e0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_84" prio=5 tid=0x00000000092cecd0 nid=0x270 in Object.wait() [0x0000000069c0f000..0x0000000069c0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_83" prio=5 tid=0x00000000092cea40 nid=0x1b18 in Object.wait() [0x0000000069a0f000..0x0000000069a0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_82" prio=5 tid=0x0000000008b92530 nid=0x1afc in Object.wait() [0x000000006980f000..0x000000006980fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_81" prio=5 tid=0x0000000008b922a0 nid=0x4b8 in Object.wait() [0x000000006960f000..0x000000006960fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x000000001af2a070> (a com.sap.engine.services.log_configurator.archive.Buffer)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.services.log_configurator.archive.Buffer.getTask(Buffer.java:38)
         - locked <0x000000001af2a070> (a com.sap.engine.services.log_configurator.archive.Buffer)
         at com.sap.engine.services.log_configurator.archive.ArchivingThread.run(ArchivingThread.java:37)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_80" prio=5 tid=0x0000000008b92010 nid=0x1ad0 in Object.wait() [0x000000006940f000..0x000000006940fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_79" prio=5 tid=0x0000000008b91d80 nid=0x1aac in Object.wait() [0x000000006920f000..0x000000006920fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x00000000155910b0> (a java.lang.Object)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.jms.server.destinationcontainer.AgentThreadSystem.run(AgentThreadSystem.java:148)
         - locked <0x00000000155910b0> (a java.lang.Object)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_78" prio=5 tid=0x0000000008b91af0 nid=0x1b00 in Object.wait() [0x000000006900f000..0x000000006900fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "Timeout Service Internal Thread" prio=5 tid=0x0000000008b91860 nid=0x1448 in Object.wait() [0x0000000068e0f000..0x0000000068e0fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x000000001af2a3f8> (a java.lang.Object)
         at com.sap.engine.services.timeout.TimeoutManagerImpl.multiThreadRun(TimeoutManagerImpl.java:483)
         - locked <0x000000001af2a3f8> (a java.lang.Object)
         at com.sap.engine.services.timeout.TimeoutManagerRunner.run(TimeoutManagerRunner.java:20)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_76" prio=5 tid=0x0000000008b915d0 nid=0x1960 in Object.wait() [0x0000000068c0f000..0x0000000068c0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "Timeout Service Integrity Watcher Thread" prio=10 tid=0x0000000008b91340 nid=0x1ab8 in Object.wait() [0x0000000068a0f000..0x0000000068a0fb80]
         at java.lang.Object.wait(Native Method)
         at com.sap.engine.services.timeout.TimeoutIntegrityWatcher.run(TimeoutIntegrityWatcher.java:69)
         - locked <0x000000001af2a6a0> (a com.sap.engine.services.timeout.TimeoutIntegrityWatcher)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_74" prio=5 tid=0x0000000008b910b0 nid=0x1a9c in Object.wait() [0x000000006880f000..0x000000006880fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_73" prio=5 tid=0x0000000008b90e20 nid=0x1aa0 in Object.wait() [0x000000006860f000..0x000000006860fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_72" prio=5 tid=0x0000000008b90b90 nid=0x1a94 in Object.wait() [0x000000006840f000..0x000000006840fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "Timeout Service Synchronous Internal Thread" prio=5 tid=0x0000000008b90900 nid=0x1a98 in Object.wait() [0x000000006820f000..0x000000006820fb80]
         at java.lang.Object.wait(Native Method)
         at com.sap.engine.services.timeout.TimeoutManagerImpl.singleThreadRun(TimeoutManagerImpl.java:596)
         - locked <0x000000001af2aa40> (a java.lang.Object)
         at com.sap.engine.services.timeout.TimeoutManagerRunner.run(TimeoutManagerRunner.java:18)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_70" prio=5 tid=0x0000000008b90670 nid=0x1aa8 in Object.wait() [0x000000006800f000..0x000000006800fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "Timeout Service Integrity Watcher Thread" prio=10 tid=0x0000000008b903e0 nid=0x19b8 in Object.wait() [0x0000000067e0f000..0x0000000067e0fb80]
         at java.lang.Object.wait(Native Method)
         at com.sap.engine.services.timeout.TimeoutIntegrityWatcher.run(TimeoutIntegrityWatcher.java:69)
         - locked <0x000000001af2ac60> (a com.sap.engine.services.timeout.TimeoutIntegrityWatcher)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_68" prio=5 tid=0x0000000008b90150 nid=0x1a04 in Object.wait() [0x0000000067c0f000..0x0000000067c0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_67" prio=5 tid=0x0000000008b8fec0 nid=0x18dc in Object.wait() [0x0000000067a0f000..0x0000000067a0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_66" prio=5 tid=0x0000000008b8fc30 nid=0x19e4 in Object.wait() [0x000000006780f000..0x000000006780fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_65" prio=5 tid=0x0000000008b8f9a0 nid=0x1a78 in Object.wait() [0x000000006760f000..0x000000006760fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_64" prio=5 tid=0x0000000008b8f710 nid=0x1a38 in Object.wait() [0x000000006740f000..0x000000006740fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_63" prio=5 tid=0x0000000008b8f480 nid=0x1a60 in Object.wait() [0x000000006720f000..0x000000006720fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_62" prio=5 tid=0x0000000008b8f1f0 nid=0x1a64 in Object.wait() [0x000000006700f000..0x000000006700fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_61" prio=5 tid=0x0000000008b8ef60 nid=0x1a8c in Object.wait() [0x0000000066e0f000..0x0000000066e0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_60" prio=5 tid=0x0000000008b8ecd0 nid=0x19f8 in Object.wait() [0x0000000066c0f000..0x0000000066c0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_59" prio=5 tid=0x0000000008b8ea40 nid=0x19dc in Object.wait() [0x0000000066a0f000..0x0000000066a0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_58" prio=5 tid=0x0000000008656ce0 nid=0xdbc in Object.wait() [0x000000006680f000..0x000000006680fb80]
         at java.lang.Object.wait(Native Method)
         - waiting on <0x0000000015591210> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
         - locked <0x0000000015591210> (a java.lang.ref.ReferenceQueue$Lock)
         at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
         at com.sap.engine.lib.util.cache.CacheGroup.run(CacheGroup.java:76)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
    "SAPEngine_System_Thread[impl:5]_57" prio=5 tid=0x0000000008656a50 nid=0x1a0c in Object.wait() [0x000000006660f000..0x000000006660fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_56" prio=5 tid=0x00000000086567c0 nid=0x1a28 in Object.wait() [0x000000006640f000..0x000000006640fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_55" prio=5 tid=0x0000000008656530 nid=0x1a54 in Object.wait() [0x000000006620f000..0x000000006620fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_54" prio=5 tid=0x00000000086562a0 nid=0x1a4c in Object.wait() [0x000000006600f000..0x000000006600fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_53" prio=5 tid=0x0000000008656010 nid=0x1a48 in Object.wait() [0x0000000065e0f000..0x0000000065e0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_52" prio=5 tid=0x0000000008655d80 nid=0x18e8 in Object.wait() [0x0000000065c0f000..0x0000000065c0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_51" prio=5 tid=0x0000000008655af0 nid=0x1a68 in Object.wait() [0x0000000065a0f000..0x0000000065a0fb80]
         at java.lang.Object.wait(Native Method)
         at java.lang.Object.wait(Object.java:429)
         at com.sap.engine.lib.util.WaitQueue.dequeue(WaitQueue.java:238)
         - locked <0x000000001ab100a8> (a com.sap.engine.lib.util.WaitQueue)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:127)
    "SAPEngine_System_Thread[impl:5]_50" prio=5 tid=0x0000000008655860 nid=0x1a74 in Object.wait() [0x000000006580f000..0x000000006580fb80]

    Could you please send the default trace.Default trace will contain the detailed description of the error message , but you will have to search a lot in that .The trace file is BIG!!!
    This trace can be found in .../DV**/j2ee/cluster/server0/log.
    Check for the latest File.
    Regards,
    Yogesh

  • Why is my G5 is stopping on the grey+apple logo screen when starting up?

    My G5 is stopping on the grey+apple logo screen when starting up and fans run faster than usual after a couple minutes. I have read many of the posts related here, but it seems none are exactly what I am experiencing. Here is what I have done:
    +Disconnected all peripheral devices (except for keyboard and mouse).
    +Unplugged power cord and plugged back in.
    +Unplugged ethernet cable.
    +Removed added memory.
    +Reset the SMU button on the logic board.
    +Reset the PRAM by pressing Command-Option-P-R keys. It makes its second start up chime but I still get the grey screen.
    +After opening the disc door with a paper clip, started up while pressing "C" with Hardware Test CD which found no problems.
    +However, also started up with Systemworks disc and ran Disc Doctor, but I get an "unexpected problem, Error found: disk error" while "Checking Directories: Catalog Structure". When trying to run Speed Disc, my hard drive doesn't even show up in the window to select it. Nor does it show up in Disk Viewer.
    I have not tried to start up from the original Mac Startup or installation disc that came with the computer. I am not at my G5 right now (having to use the internet at work). If I start up with that disc, will I loose any work (if I haven't already) that I haven't backed up?
    Also, the G5 manual suggests replacing the lithium battery inside the tower if I am having problems starting up. I have not read to do this anywhere else except in the manual. It mentions having problems with the date and time which I haven't so I doubt it's the battery.
    Any suggestions?
    Thanks,
    Tony
    G5 Power Mac   Mac OS X (10.0.x)  

    First and foremost you should never use Norton Utilities Disk Doctor or Speed Disk. They will corrupt your hard drive. NUM is not compatible with modern Macs and is no longer supported by Symantec. I highly recommend you uninstall it. You will find instructions here.
    You should do the following:
    Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu . After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If this does not fix the problem, then it's possible your system files have been damaged in which case you may need to reinstall OS X. You can do this by an Archive and Install which does not require erasing the hard drive. However, the hard drive must be verified as OK per the preceeding intructions.

  • Imac have grey screen at start up.

    Have grey screen at start with question mark in folder. Have reset PRAM. Have tried start from disk and can not. Need help.

    Your drive is shot, time for a new one. The question mark means the computer can't find a drive to boot from. If you have an external clone, you could try booting from that.

  • What would cause a prolonged blue screen during start up?

    I have an iMac desktop.  Recently I've had trouble with a prolonged blue screen during start up (approx. 10 mins) before it finally takes me to the login screen.  Any ideas why this is happening?
    Jeff P.

    Hi Jeff,
    Open console in Applications>Utilities, check the system log for the date/time of the last problem Startup for clues.

Maybe you are looking for

  • Font appearance and bullets

    When a line is formatted using a bullet, the font size appears to change when viewed in the published or compiled modes. I've checked the font and it is the same. Try it and see. Add a text caption and type something with no bullets. Add another text

  • N3120c software issues maybe?

    Hello all. Just wondering if anyone here has had software issues with the 3120c? The 2 I've had recently are frequent A2DP Bluetooth pairing dropout's while playing tunes, and when unlocking the key pad the phone locks up and reboots occasionally? Th

  • BTTray.exe - System Error on T410

    Hi all, After doing a clean install of Windows 7 Pro x64 I ran the Lenovo Updates and Drivers tool to get all of the right drivers and tools for my system.  After that installed I started getting the message "BTTray.exe - System Error" "The program c

  • New iPhoto crashes on launch.

    Yesterday, I completed an "update" on OS-Yosemite that puts me at ver. 10.10.3. With it came the "new look" iPhoto, which seemed to work long enough to synch with my iCloud photo library. This morning (day 2) it now crashes on launch. The first launc

  • Unable to access Store

    I have a client with about 20 PCs running Windows 8/8.1. The 8.1 systems were upgraded to 8.1 via the Store. There is one PC that I cannot do this on because I can't get the Store to run. When I click on its tile I get the standard message that it co