Yellow tint! the 3rd Screen of my iMac 27, it's getting worse and worse...
Hi everyone not sure if there is anything more i could do with this, I have a 2010-13 week iMac, it came with a 'bearable' yellow tint problem from the beginning, after a hard drive failure i had to send my iMac back to Apple care, i was hoping the screen problem had been solved so I asked them to replace my screen as well, it came back with a worse panel showed much larger area of yellow tint...
Then I decided to wait for a few months until a week ago before my holiday i called for another exchange, was hoping for a perfect screen after my holiday, now holiday is over and iMac is back, just right after I pressed the power button, the start up screen with apple logo clearly tells me that i have got a even more disgusting panel - the worst of all i have to say, a new uneven shadow line on the bottom plus the usual yellower tint spreads over the middle of the screen, oh yes, they decided to make it even worse, a big dead spot as well in the corner ....
after a few hours, when i was editing a photo in Aperture, I have discovered something even more disturbing, from right edge of the screen inwards there is around 8cm wide vertical band shows obvious brighter tone than the rest of screen...
I do a lot of black & white photography plus a lot 3D graphic work, for a while I had tried to live with the yellow issue until it got really frustrating - now i have to once again arrange an exchange as this one is just unbearable!
Is this really Apple? Hard drive failed after a year and this is the 3rd screen of the iMac, and it just gets worse...
I wonder if there's anyone who had the luck to get the yellow screen replaced by a decent one?
Are you talking about a mid-2011 iMac or a 2010 iMac?
As it seems, the issue of color inconsistency of the iMac display is far from solved. Yellow tint, uneven brightness, light-leaks are very easily found even of newer models. I have a two-week-old mid-2011 27-inch iMac that I tried to replace for a new one because of yellow tint issue. It turned out that the replacement iMac had a worse screen... So I kept the first one. Not sure if the right thing to do is just get the screen replaced. It seems users have done it with no success...
So, I guess these problems are structural on the iMac line. They seem very much to be omnipresent. And I don't see Apple offering a genuine/trustworthy solution through its in-warranty support.
Similar Messages
-
How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)
How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W -
Creative vision:m won't go past the 3rd screen on start
Hello, this is my first post and I just got the creative vision:m for xmas and it was working fine, it has never been dropped and spends most of its time in the pouch. But when I try and start it up no it gets the the 3rd screen and just stays their frozen with all the buttons lit up and the backlight on. I tried the recovery mode and did the clean up and that didn't work, my comp also doesn't recognize when it is plugged into it for some reason, I mean the comp will recognize it but the creative programs won't recognize it so I can't even upgrade the firmware and see if that is a problem.
If anyone can hel that would be amazing because this is very frustrating.
Todd
Edit: I just tried plugging it into my sisters computer and it didn't detect it either, so the problem is definatley with the play, THIS SUCKS!Message Edited by tmrathie on 0-4-200709:07 PMthats what I figured, bah and its like 2 weeks old, at least its still under warranty.
ThanksMessage Edited by tmrathie on 0-6-200706:27 PM -
hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.Anyone have any suggestions? or is everyone else just as clueless as me !
-
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.How can i do it?Now I live in Myanmar(Burma).Please can you help me?........
<Personal Information Edited by Host>RichardRicardo wrote:
I upgraded to IOS 7.0.4 and the iPhone now is on The Activation screen i bought this iphone as USED... and i didn't know the apple id.
Sorry... But... The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.
There is No Workaroud for Activation Lock. -
Getting the black screen on my 6mth old macbook pro. Reboot and nothing happens.
Getting the black screen on my 6mth old macbook pro. Reboot and nothing happens. It sometimes rebbots by holding down on/ off key. But will go black screen and die a few minutes later. Any help much appreciated.
If you experience distorted video or no video . . . take your affected product to an Apple Authorized Service Provider or Apple Retail Store to determine which service and support options are available. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/
No, it has not cost anything in the past.
Note: as of Dec 7th 2012, it is unlikely products qualify for this extended repair coverage.
That does not mean it's an automatic "no." -
Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
I upgraded to lion. I now have the spinning wheel on the startup screen when I try to enter my user name and password. I tried shutting down and restarting, no luck
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
My MacBook Pro has been having difficulties at startup. It sometimes locks and doesn't get past the white screen. It has also locked up several times and gotten a green stripes across the entire screen. What is causing this and how do I fix it?
You don't, take it to Apple for repair.
This might interest you if it's too old to fix.
My computer is not working, is my personal data lost? -
Is there a way to have an external monitor dim like the main screen on an iMac?
i have an apple 24 inch external monitor attached to a 27 inch imac. the main screen dims according to the energy saver settings but the external monitor stays bright. there seem to be no settings in the energy saver pane in system settings to control the dim function, any suggestions?
could you not just connect it with the vga adapter and then turn the brightness of your screen all the way down so there is no light? i had to do that for my ibook g4 when i cracked the lcd, but thankfully i have my macbook now.
-
I have a frozen iPod Nano 4G. After syncing it gets stuck at the language screen and cannot proceed any further.
I have tried holding down the Menu and click buttons for >6 seconds, without luck. Have reset to factory settings and re-syncd, but it keeps getting stuck at the language screen.
I suspect it is the latest version of iTunes causing the problem, as I just installed it a couple of days ago and this is the first sync since the update.
24" Intel iMac 3ghz C2D, OS X 10.6.7, iTunes 10.3.1 (55).+Do you have access to, another Firewire enabled Mac, that you could use, to attempt a retrieval of data, using Firewire Target Disk Mode?+
A question on this Firewire Target Disk Mode - If I could get access to another Firewire enabled Mac and connected the two together, host #2 to Target #1, with a Firewire cable (6-pin to 6-pin), and power the two up, even though #1 would not be booted up to the desktop but just have the hard drive powered up, would the hard drive of #1 be accessible to #2? If so, would I be able to perform any repairs or do anything to the drive to enable it to bootup the #1 computer? This would be similar to when I remove and hook up a 2.5" IDE-ATA PC laptop hard drive to another PC computer, usually a desktop, via a drive adapter and USB 2.0 cable, as an external drive. When I do this in a PC, it's usually one that is unable to boot up to Windows due to malware or other problems. I am able to see the files and folders on the #1 computer's hdd and then clean out any malware (virus/spyware), or add/replace any corrupt/damaged Windows files that might be keeping the #1 computer from booting up. After that, I can usually return the hdd to the #1 computer and boot up normally to finish any clean up or change any settings.
I had considered taking the hdd out of this damaged iMac computer and attempting to hook it up with a PC, but after seeing how difficult it is to get to this hdd and not sure of what I'd do when and if I did get the two connected together, I put the idea way back as a last resort. I wasn't sure I'd even be able to see any folders or files on the Mac hdd due to the differences between OS X and WinXP. And, after reading that Macs aren't susceptible to malware, I didn't know what I would be accomplishing. -
Yellow tinted iphone 3G screen compared to other 3G iphones?
Hi guys,
I juts purchased a new iPhone 3G, however when I compare this to either my friends iPhone 3G or any of the demo handsets instore, mine has a noticably yellowish tinge to it.
I am aware that Apple changed the white point between 1st gen iPhones and the 3G version, yet I am comparing this to other 3G handsets and it seems noticably duller.
I have exchanged the device 3 times, amde sure each was running 2.2, and each handset has been the same-does anyone know why this might be?
Message was edited by: The HeroDynamite DJs wrote:
you've exchanged it 3 times and this is your first post? Amazing!
Actually I don't think that's amazing at all. I think its the norm.
When you stop to consider that three High Volume retailers are offering $99 refurbs its pretty clear to me there are a LOT of refurbs, way more than you ever here about on this forum, and Apple is standing squarely behind this product by replacing them for the slightest problem.
Many posters here insist that if the forum isn't overflowing with complaints there is not a problem. Yet any visit to the Apple store will show genius after genius dealing with iphone after iphone ALL DAY long. The vast majority of people, when faced with a gadget problem do not get on the web and complain.
They either RTFM, call apple, or go visit the store. -
Okay well, to start off, I got my MacBook from a distant family member who got a new one so they let me have their old one. They got it from a pawn shop so I don't have the disk that we got the OS from but it hasn't had any issues UNTIL NOW. I need to use my laptop for a homework assignment so please help me quickly. Everytime I turn it on it'll just stay on the loading screen, I left it for 4 hours yesterday and it still wouldn't work. I reset the (insert acronym here) thing already, the thing where you press control, option, P, R keys at start up. I really need help because my assignment is on the laptop and it's due tomorrow. Please help. ={ And I'm not entirely sure which OS it's using because I've never really checked.
Boot from the OS DVD you have for the computer.
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can reinstall OS X, but the procedure depends on the version of OS X that is installed. -
I was trying to enter a revised p/w in itunes via the tv screen. After several keystroke mistakes, i got a message "unable to sign in". How do I get passed this to get the apple tv accessible?
Maddy Girl 2May mean you are locked out of the account. Contact iTunes.
-
The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?
Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.
Maybe you are looking for
-
Boa noite, baixei uma atualização do software do iphone 4s porque o alto falante não estava funcionando e quando fui restaurar um backup dos meus dados do itunes ele parou novamente de funcionar, mas agora não consigo fazer novamente esta atualização
-
Dear Creative Labs: As a once valued customer I now feel completely betrayed by your unlawful and unethical business pratices. While as a former Aureal user, I turned a blind eye chalking it up to Aureal being careless. However after reviewing your b
-
Hi, is there a way of haveing your powerbook G4 not go to sleep when you close the lid? I have been looking at all the settings but there does not seem to be a setting for this. Thanks David
-
Automatic setting are on but apps only download to iPhone not ipad
Why are apps downloading to my iPhone and not to my iPad? All automatic downloads are on and I am using the same login for both devices. I am also on my iPad picking the apps like stupid zombie and it immediately syncs on the iPhone but says waiting
-
Problem Installing Creative Suite 6 Production Premium
I am trying to install the student and teacher edition of Adobe creative Suite 6 production premium. I received the serial number authorization and I can get through all the initial questions however when the install starts it stops at 2% while it's