Yellow Triangles

ok  i understand that now i have a yellow triangle on my voiceover because I have move a the content or its corrupt so how can i retrieve it /repair or  find it

Hi there,
Just to expand on what PhillyPhan noted. The yellow triangle is a low resolution warning, meaning the quality of the print size you are odering may not be satisfactory due to low resolution of your uploaded image.
Here's a list of recommended resolutions:
4x6 - 640x426 pixels
5x7 - 1050x750 pixels
5x6 Photo cards - 640x480 pixels
8x10 - 1280x1024 pixels
8x12 - 1536x1024 pixels
11x14 - 1600x1143 pixels
12x18 - 1600x1066 pixels
16x20 - 1920x1536 pixels
20x30 - 2272x1500 pixels
Wallet prints - 419x279 pixels
Keep in mind, that you can use a high resolution image to make a small print. Even though you get a yellow triangle, that does not necessarily mean you will get a bad print...
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Similar Messages

  • I've been trying to link my apple id to my macbook. every time i try this it doesn't work and gives me a little yellow triangle with an exclamation mark in. any help on the matter would be great.

    so everytime i try and link my apple id to my macbook (mid 07) it doesnt work and i get the yellow triangle. i recently reset my mac as i forgot my password. in the process i made another user to reset my password. doing this i went through the complete start up of a macbook (from when you buy from new). i dont know if this has anything to do with this problem. but i have now deleted that user.
    any help is much appriciated.

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Yellow triangle and a grayed out movie clip

    Hi, I created a project in iMovie 08, kind of elaborate for me, with several movie clips, each with a transition, and background music from iTunes through out the majority of the 3 minute and 30 second final project. Initially, all was well and the project played perfectly. A couple of days later when I went into iMovie 08 to enhance the project, several clips were grayed out and had a yellow triangle in the clip. Placing the cursor over the clip resulted in the clip "coming to life" that is revealing the clip but the clip was not visible in the browser and the grayed out clips were not visible if I played the project in full screen mode. If I published the project to the web, the grayed out clips would not show (the video portion); the audio which was part of the whole project would play. I do not think I moved any clips to a different location although I certainly added other clips to iPhoto and then to iMovie. I just finished the lynda.com training on iMovie 08 which was just released and I got no help from that training on the yellow triangle problem. Any help or ideas would be appreciated. Thank you.

    Great news! After some browsing around, I located the problem, and now my movie project is fixed!
    As it turns out, videos that are located in iPhoto are referenced based on the Event that they belong to, which means that if you change the name of the Event that the picture belongs to then iMovie will no longer be able to find your picture. (This is also why the clips appear in the lower section of iMovie, because they are still there, just in a renamed or merged event.)
    I was able to fix the problem very easily by renaming my event back to the original name, and then after closing and restarting iMovie all the nasty little yellow triangles were gone and all my clips were back as if they'd never left.
    This may or may not help, but for me, to make sure that I got the event name correct, I found the movie file (which was in "Movies/iMovie Projects") and then right mouse clicked and selected "Show Package Contents" so that I could see what was in my project, and then opened the "Project" file, which had the names listed in it. Hope that helps!
    Trigby

  • In iMovie: I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?

    in iMovie:
    I open a project that has been finalized. source fragment is missing. I see a yellow triangle with exclamation mark. Why is that and how do I solve the problem?
    please help.
    J. Aalbers

    Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
    Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

  • Yellow triangle appears on all photos but no problem found?

    Things have definitely slowed down on Aperture since I upgraded to a Nikon D800 (each raw file is about 40mb). I'm having problems with speed and occational crashes. Yesterday the computer (macbook pro, 3 years old) forced me to shutdown and when I restared I had to rebuild the library which finally opened and showed ALL my images in Aperture had the yellow triangle with "!" and the arrow. I've had this issue with some files before and would "locate referenced files" (I keep all masters on an external which is backed up twice in differnt locations). Locating referenced files has always fixed the problem but here's the issue, sorry it's taken this long to get to it.....
    When I locate files they are found quickly on the external drive but the button to reconnect (tried 'reconnect all' too) doesn't do anything. I then finished all my edits from the last shoot and exported without any problem. So it looks like it's all working fine but I'm confused/nervous about those **** yellow triangles that are on all of my 17000 images.
    One thought is that I may have had my second external plugged in still after I had done a manual backup... and maybe Aperture referenced the backed up files? Even if that happened I should still be able to locate referenced files on the master hard drive and reconnect all.
    Any thoughts on this would be appreciated.
    Cheers
    Pete

    When I 'control/alt/clicked' and chose "repair database" in Aperture, it quickly said there was a problem and I had to "Rebuild the database". I first quit, and made a backup just in case, then went back in and chose the "rebuild" option. IT WORKED. All the yellow triangles are gone and it even fixed a couple of the glitches with exporting I was having.
    Thanks for your guidence Kirby and hope this helps others.
    Pete

  • When I click on Firefox it opens with a box that says "Foxfire is installing your updates and will start in a few moments-. " then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle) The update could not be install

    When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
    The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
    == This happened ==
    Every time Firefox opened

    If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
    It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

  • Office Home and Student 2013 error message with yellow triangle

    I have been using my word and excel they were working fine. Now there is a yellow triangle  top right corner by my initials. I finally got it to show me only for a moment what it means. Error Message: did not realize I should have copied it down but
    after error message it said to sign-out and sign back in. I have never had to sign in before the Office was installed in Dec 2013 by Best Buy. All they returned was the card they had used to download. When I tried to click on sign in it does nothing. The error
    seems to have the word program very mixed up as it will preform some task but seems to lock me out of other normal things I usually do like spacing or changing font size just to name a few. I already checked for all updates on my computer per your sites suggestions.
    How do I make the error message /yellow triangle go away and allow me to use the office home and student 2013 like it was working before. Please help I live alone, and near 60, live in the boondocks, and do not have any computer people within a 4 hour drive
    round trip. Thank you

    Now there is a yellow triangle  top right corner by my initials.
    Hi,
    As per the description, it looks like an issue with your microsoft account. Does the error message look like below?
    ACCOUNT ERROR
    Sorry, we can't get to your account right now.
    To fix this, please sign in again.
    Sign in
    You mentioned that "a yellow triangle  top right corner by my initials", you probably have already signed in with an acocunt. If you remember this account, I'd suggest you click
    File>Account on the tab, click Sign out under
    User Information, and then sign-in again. If you don't have this account, you probably need to contact the retailer for it.
    If issue persists, please post back with the details of your system environment, then we will take a further look.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • My ipod will not stay connected to my computer.  When first plugged into the usb port, I can see it as a drive.  Within seconds it disappears.  If I look in the devices area, I can see it but it has a yellow triangle with an exclamation point beside it.

    When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears.  It can be seen under devices but as a yellow triangle with an exclamation point in it.  If I run trouble shoot, it states windows is disconnecting this device. 
    I can see it in itunes as a device.  However, this is a brand new computer, running windows 7.  My last one bit the dust in mid use.  I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
    Any help would be greatly appreciated.

    Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
    Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
    If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
    Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
    Anyway, just hard reset your iPod, so that we can start from scratch
    1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
    2. Connect it back to your Notebook or Desktop.
    if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
    Good luck!

  • Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error.  Checked and no yellow triangles, music on computer,  any ideas.

    Creating project as Disc Image after 1 1/2 hours it appeared to be finished but there was message that there was a multiplex error.  Checked and no yellow triangles, music on computer, and all resources on computer,  any ideas??

    Hi
    And
    • free space on Start-Up hard disk ? How Much ?
    • Brand and type of DVD used
    • Burn Speed ?
    • Did You try to first do a "Save as a DiskImage" ? If so - Did it work ?
    Yours Bengt W

  • My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    Here:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • External hard drive not recognized in imovie 09 - ! - in a yellow triangle

    i'm new to imovie and want to save space on my hard drive by saving files in an external drive
    - i'm only able to import to the computer hard drive... not to the external hard drive.
    - i can archive video files from the cam to the my external hard drive (500gig passport)
    - when i go to import to the the same external drive... the drive is not available in the +"save to"+ drop down menu...only the computer hard drive.
    - the external drive shows up in the +"event library"+ window, however it has an +"exclamation point ! in a yellow triangle"+
    help!

    The external drive must be formatted as Mac OS Extended (journaled). If you drive is currently formatted as FAT32, you can re-format it using Disk Utility in your Applications/Utilities folder.
    If you have any current data on the external drive, be sure to back it up before formatting. A format will erase all data that is currently there.
    To reformat the drive, open Disk Utility and select the drive. First Partition the drive using GUID (if you have an intel mac, or using Apple Partition Map (if you have some old Power PC macs that will need to access this drive). A single partition is OK.
    Then reformat this partition as MacOS Extended (journaled).

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • An alert box with a yellow triangle keeps randomly popping up

    An alert box with a yellow triangle keeps randomly popping up on my screen. But I don't have time to read what it says because it disappears in 1 sec. What is it? What can I do to get rid of it?

    Window keeps popping and closes before...: Apple Support Communities

  • How do I know if my image resolution is too low now that the yellow triangle warning is gone?

    I am creating a book in iPhoto 11 for the first time. In older versions, I would get a yellow triangle indicating my image quality was too low for that size image. Based on other threads, it looks like iPhoto no longer gives the warning. What is the best way to know if the image will print okay? Is there a workaround so I can check the quality of the image prior to printing out the book?

    I noticed that there's not resolution waring also.  Create a PDF file of the book and look at the pages at full sized with Preview and determine if the photos are sharp enough for you.
    I ran a test with two images, one 4000 x 3000 pixels and the other 230 x 200 pixels in a 2 photo per page book page and then created a pdf of the book, Modern Lines theme.  This is a screenshot of  the page in Preview at View ➙ View Full Sized:
    This screenshot is of the same photo in a different 2 photo per page layout in the same theme.  It does look more like I expected:
    Right click on the image and select Show in New Window from the Contextual menu.  I'm really surprised the first example of the small image looked as good as it did. I expected a very pixelated image like the second example but iPhoto upsized it rather nicely. So iPhoto can upsize a small photo to some degree but I don't recommend relying on it for such small images.   And it is a very, very, very small image.  Soif your image is reasonably large you should be OK.  But check it in the PDF file.
    OT

  • MIssing image quality warning!? (yellow triangle !)

    so in photo 10, when adding low quality / low resolution images to my books or calendars, i used to get a yellow triangle warning me that the quality is not good enough. i also got the warning when enlarging a photo beyond a certain point.
    since upgrading to iphoto 11, i can NEVER get this warning to show up?
    even when i place obviously low quality / low resolution images, and i enlarge them, I don't see that icon?! no matter what i do, the icon doesn't come up!
    has Apple removed this warning? does everyone have it except me? is it an option to turn on and off? this is driving me crazy!

    I just spent a week creating my annual family calendar in iPhoto '11, didn't see the yellow low-quality image warning triangles from past iPhoto versions and assumed all the photos were decent enough to publish. Boy was I wrong. When I went to order the calendars, during the assembly process I kept getting low-quality image messages, but it only gave the name of the photo file and stopped processing at that page. It didn't show me what photo it was, so I had to figure out which image it was by using "spotlight" and entering the file name. What a pain in the ***.
    Once I fixed the offending image, I had to start the entire order process over again, reconfirm payment and shipment information, only to keep getting a low-quality image error message again, and again, and again. It couldn't have saved all the poor-quality images messages for 1 message, so I could fix all the problematic images at once and only have to resubmit the order once. No, it only told me image by image, page by page, if there was a problem, causing me to have to resubmit my order 7 times. It took me 45 minutes to finally order my calendar. I am not happy. I've been ordering my calendars through iPhoto since 2008 and have never had this much difficulty with image-quality messages and order processing.
    The photos that caused the error messages were those that other people had sent me that weren't very good quality, and that I had edited once placed in the calendar. Once I deleted the edited version and replaced with the original version, I didn't get an error message. If the image was just too poor quality to begin with and I couldn't use the edited version, then I replaced it altogether.
    I just don't know if anyone else has had this much trouble with uploading and ordering their calendars. I hope Apple reinstates the low-quality image warning system that tells us BEFORE we try to place an order which images may have problems. Or at least just give us ONE error message after assembling the calendar that includes ALL the offending images (including the thumbnails, not just the file names), so we don't have to go back over and over and over again and have the ordering process be so incredibly frustrating.

  • Whenever I plug my iPhone into the car charger (professionally installed and hardwired), it comes up with the yellow triangle and exclamation mark saying that this accessory isn't supported.   It's been working quite fine since 2010, now it's not.

    My iPhone car charger was professionally installed in 2010 and again in 2013 and had been working perfectly for all of this time, now it's coming up with the yellow triangle and the text saying that this accessory isn't supported.    Is there an easy way to fix this without tearing everything to bits?    It all appears to have gone boonta about 3 upgrades ago and I haven't been able to use it since.
    I've seen and tried the suggestions on Google, none of them work for long, and I'm certainly not going to tear the car kit or phone apart to overcome something that is obviously a software issue.    Surely Apple can overcome this?
    And the bloody "Terms and Conditions" fiasco!   55 pages of mumbo jumbo that nobody would read EVER, and you get to the end and nothing happens.   I've bought an app from Apple to use on their product and I can't install it because the Terms and Conditions doesn't accept anything.   Surely they can fix this?
    Come on.....waiting.
    REgards,
    SuperGeezer

    basic troubleshooting on iPhone
    Reset
    restore with back up and if required as new
    Updating may have corrupted the iOS if you used over the air to update

Maybe you are looking for